Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 349

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9487
id	ddss9487
authors	Snijder, H.P.S.
year	1994
title	The Use of Genetic Algorithms in Spatial Optimisation Problems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The manipulation of a set of associative data usually involves the search of a huge search-space (e.g. a set of 20 elements can be ordered in 20! ways, which is approximately equal to 2.4e+ 18). Rooms on a floor can be considered as a set of associative data. Optimising such a set according to some criterion (for example, minimising the distance between the related elements) can therefore be a daunting task. In order to assist in this task, a program (called ROP) has been developed, which graphically represents the relations in a matrix. The points in this matrix can be moved manually, thereby transforming the search process into a visual task. However, a considerable amount of skill remains required. In order to further alleviate the user in this task, ROP has been augmented with a Genetic Algorithm. A genetic algorithm is ideally suited to deal with very large search-spaces, and proved to be a valuable addition to ROP. In addition to employing the genetic algorithm for finding the optimal ordering, it can also be made to suggest several different orderings with approximately equal fitness, thereby providing elementary creativity support. The combination of ROP with a genetic algorithm provides a generic tool for the manipulation of all multivariate or associative data sets; in- as well as outside the design realm.
series	DDSS
last changed	2003/08/07 16:36

_id	9aa3
authors	Michalewicz, Z.
year	1994
title	Genetic Algorithms + Data Structures = Evolution Programs
source	Springer-Verlag, Berlin
summary	Genetic algorithms are founded upon the principle of evolution, i.e., survival of the fittest. Hence evolution programming techniques, based on genetic algorithms, are applicable to many hard optimization problems, such as optimization of functions with linear and nonlinear constraints, the traveling salesman problem, and problems of scheduling, partitioning, and control. The importance of these techniques is still growing, since evolution programs are parallel in nature, and parallelism is one of the most promising directions in computer science. The book is self-contained and the only prerequisite is basic undergraduate mathematics. This third edition has been substantially revised and extended by three new chapters and by additional appendices containing working material to cover recent developments and a change in the perception of evolutionary computation.
series	other
last changed	2003/04/23 15:14

_id	ddss9474
id	ddss9474
authors	Pereira, A.G., Munda, G. and Paruccini, M.
year	1994
title	Generating Alternatives For Siting Using Genetic Algorithms and Multiple Criteria Decision Techniques
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is believed that a fundamental step in the structuring of a siting problem is generating alternati-ves. This task should occur at the beginning of a process for facility location, giving a preliminary insight into the feasibility of the project in the area of concern by identifying a manageable number of feasible alternatives for careful review and consideration. The purpose of this paper is to present a methodology aimed at generating alternatives for siting of facilities taking into account a number of criteria. These criteria comprise environmental, economical and the action's inherent technical aspects. The search is carried out by applying genetic algorithms (GA's) which are natural phenomena based algorithms for optimization and random search procedures. According to the GA's terminology, a fitness function measures the worth of each candidate alternative codified into a chromosome. It was thought that the merging of aspects of multiple criteria theory and genetic algorithms is essential for the problem of generating alternatives in location problems. The aim of this integration is the improvement of the theoretical principles upon which the fitness function is based, leading to the construction of a robust set of alternatives. The paper describes the integration of both multiple criteria theory and GA's and discusses the results.
series	DDSS
email
last changed	2003/08/07 16:36

_id	e1a1
authors	Rodriguez, G.
year	1996
title	REAL SCALE MODEL VS. COMPUTER GENERATED MODEL
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Advances in electronic design and communication are already reshaping the way architecture is done. The development of more sophisticated and user-friendly Computer Aided Design (CAD) software and of cheaper and more powerful hardware is making computers more and more accessible to architects, planners and designers. These professionals are not only using them as a drafting tool but also as a instrument for visualization. Designers are "building" digital models of their designs and producing photo-like renderings of spaces that do not exist in the dimensional world. The problem resides in how realistic these Computer Generated Models (CGM) are. Moss & Banks (1958) considered realism “the capacity to reproduce as exactly as possible the object of study without actually using it”. He considers that realism depends on: 1)The number of elements that are reproduced; 2) The quality of those elements; 3) The similarity of replication and 4) Replication of the situation. CGM respond well to these considerations, they can be very realistic. But, are they capable of reproducing the same impressions on people as a real space? Research has debated about the problems of the mode of representation and its influence on the judgement which is made. Wools (1970), Lau (1970) and Canter, Benyon & West (1973) have demonstrated that the perception of a space is influenced by the mode of presentation. CGM are two-dimensional representations of three-dimensional space. Canter (1973) considers the three-dimensionality of the stimuli as crucial for its perception. So, can a CGM afford as much as a three-dimensional model? The “Laboratorio de Experimentacion Espacial” (LEE) has been concerned with the problem of reality of the models used by architects. We have studied the degree in which models can be used as reliable and representative of real situations analyzing the Ecological Validity of several of them, specially the Real-Scale Model (Abadi & Cavallin, 1994). This kind of model has been found to be ecologically valid to represent real space. This research has two objectives: 1) to study the Ecological Validity of a Computer Generated Model; and 2) compare it with the Ecological Validity of a Real Scale Model in representing a real space.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:42

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	9e13
authors	Seward, D.W., Scott, J.N., Dixon, R., Findlay, J.D. and Kinniburgh, H.
year	1997
title	The automation of piling rig positioning using satellite GPS
source	Automation in Construction 6 (3) (1997) pp. 229-240
summary	The paper is divided in two parts. Part one describes the Stent Automatic Pile Positioning and Recording system (SAPPAR) which was launched in November 1994. The system utilises a Trimble satellite global positioning system (GPS) to assist rig drivers in accurately positioning the rig over a pile position without the need for setting out. Advantages of the system include: cost savings by removing the need for site survey staff; faster set-up times over pile positions; increased accuracy - the system can reliably position the rig to within ± 25 mm; removal of problems resulting from damage to setting out pins; constant monitoring of pile position; and Links to CAD for data input and as-built drawings. Part two describes a further development of the system in collaboration with Lancaster University and Casagrande, the Italian rig manufacturer. The aim of the research is to fully automate the final positioning process. This represents one of the first uses of GPS for real-time automation. The system hardware components include: ultra-compact PC104 processor cards for a compact and robust embedded system; minimum sensing on the rig to minimise cost and maximise robustness; and limit sensors to facilitate on-board safety. The control algorithms were developed on a fifth-scale model in the laboratory using an innovative and new approach to the design of model based control systems. The importance of careful consideration of safety issues is stressed and conclusions are drawn based on the early findings from preliminary field trials.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ddss9414
id	ddss9414
authors	Bright, Elise N.
year	1994
title	THe "Allots" Model: A PC-Based Approach to Demand Distribution for Siting and Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper reports on the development and application of ALLOT: a user-friendly, flexible computer model which has been designed to help governmental jurisdictions and private landowners throughout the world to achieve more economically efficient and environmentally sound land use and development patterns in a short period of time. ALLOT has the potential to drastically change the way that land use planning is conducted, since it has the capability to allow theincorporation of a wide variety of previously ignored environmental characteristics and up-to-date land use patterns. ALLOT, which is written in the SAS programming language, contains twomajor parts. The first part employs a GIS database to conduct land suitability analyses for the area. It then produces maps showing the most suitable areas for various land use types. The second part appears to be unique in the field of computerized land use planning models. It combines the results of the suitability analysis with forecasted demand for various land use types to produce "optimum" future land use patterns. The model is capable of quickly analyzing a wide variety of forecasts, allowing easy comparison of different growth scenarios; and it can also be modified to reflect community goals and objectives, such as protection of wildlife habitat orattraction of industry. The flexibility, combined with the fact that it runs on any IBM-compatible PC (286 or higher), make it a powerful land use planning tool. The model has been successfully applied in two "real world" situations. First, three alternative future land use patterns were developed for a rural lakeside area. The area had rural characteristics and was lacking infrastructure, but a large influx of people was expected as the lake was filled. The success of this effort led to decision to test it´s use as a method for facility siting (using landfill siting as an example).
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9441
id	ddss9441
authors	Hammond, Barbara
year	1994
title	Computer Aided Urban Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The product of the Urban Design process in the public sector in the UK is usually a briefing document of some kind which communicates design ideas in outline both to the lay public and to private developers. The problem with briefing effectively is that outline expression of ideas does not provide a strong basis for negotiation with developers; the temptation therefore is to work up one proposal in detail and to present it as the only option. This type of prescriptive briefing may be successful in situations where the public body has control over the land, the economy is buoyant and the site has a simple context. Its problems are that it is labour intensive, so some areas are covered in detail, others not at all; it is seen as restrictive by developers, so may create a climate of conflict rather than certainty; it is not responsive to change; it covers specific sites thoroughly but does not deal well with large, complex areas; on large sites it tends towards a homogeneous environment whereas the nature of towns and cities is pluralistic and heterogeneous; it confines the Urban Designer to site specific work rather than allowing concentration on the whole urban system. Urban Designers at the London Docklands Development Corporation felt that CAD might present some answers to these problems in facilitating an iterative, interactive briefing process which could respond quickly to change; whereby varying options for development could be investigated fully but quickly and resource-efficiently; which could be used to communicate design ideas effectively to non-professionals; which could help to make negotiation with developers more effective, less confrontational; which could deal with large, complex sites effectively. The idea was that a piece of city could be modeled on the computer and an urban design study would then be carried out on it which would test varying options for development, resulting in an outline, but three dimensional, model for an area which could be used in three ways: as a briefing tool, as part of a marketing exercise and as a tool to aid effective negotiation and consultation at the planning stage. A pilot project was carried out on a set of development sites at East India Dock and, following the success of this, a full study was carried at Surrey Quays Centre. The paper describes these projects and discusses both their products and their effect on the developmentprocess as aids in decision making.
series	DDSS
last changed	2003/08/07 16:36

_id	e8b9
authors	Kesler, Beatrice
year	1994
title	PROGRAMME OF HABITAT WISHES - A TOOL FOR COMMUNICATION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 23-30
summary	How to develop an attractive built environment with the desired housing and well kept outdoor conditions? As long as experts do not ask lay-people for their needs and wants, we must not be surprised that people are not interested in their environment and show a lack of care. The contribution of (future) inhabitants in the planning process can have a material and a social impact on building, improving and maintaining a neighbourhood. One of the problems that have to be solved is the question how to improve the communication between non-professionals and professionals, between inhabitants and designers (architects). Inhabitants express themselves in a simple language about the number of rooms, cupboards, size of the garden and parking place. Architects communicate in drawings of designs and talk in a technical language about functions, forms, spacial structures, light and expression. It can be helpful - is the fundamental idea in Wageningen - to develop a shared language, to start talking about activities and to use scale models in a structured process. The participation process is a sort of exploratory expedition. Good communication is a must for a successful participation process. A clear expression of the 'programme of habitat wishes' is the first step in the dialogue between inhabitants and architect. The Structural Space Planning Method is a structured process to develop a 'programme of habitat wishes' for the built environment. It can be related to all sorts of objects: houses, co-housing projects, institutions, playgrounds, streets or neighbourhoods. Full scale and scale models are part of the Structural Space Planning Method, as described by Van Dam (these proceedings). This contribution describes some practical experiences with the development of the 'programme of habitat wishes' and the effects on the participation process.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 10:59

_id	ddss9453
id	ddss9453
authors	Krafta, Romulo
year	1994
title	Urban Configuration, Attraction And Morphology
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Spatial Interaction (SI), based on the principle of attraction, has set up a powerful way of looking at the behaviour of urban systems. Within-place activities generate and/or attract trips, due to their inner fragmentary nature; several activities articulate a system of locations and flows which is supposed to be regulated by concentration of those activities and distance between them'. SI has been criticized for having a poor theory and little regard to spatial specifics. In general terms, planners and large-scale urban scientists have been more comfortable with it than designers and urban morphologists, whose questions about space configuration are awkwardly dealt with in such a framework. Recently, Space Syntax (SS) has been suggested as an alternative to describe possible roles of space in the urban system. Its theory looks very complex - a deep cultural, anthropological connection between man and space, an atavistic impulse driving the shaping of space. Teklenburg et al have shown, however, that it is, in fact, very simple and not far from the rude assumptions of SI: a matter of distance and orientation3. Hence, what does look new is just its way of describing orientation, through the axiallity of public space. Axial lines retain the fundamental issue of connectivity; so they describe space more efficiently than the traditional zones or links used in SI models. SI says little about configuration, SS says little about interaction between spaces and activities, and both say nothing about morphology, or the configurational development of urban systems. An alternative approach is suggested: (i) urban spatial configurati-on (urban grid and built form) strongly conditions activity location and flows, in the short term. In this way, a convenient description of such a configuration should denounce its potential to housing activities and generate flows. This required description should take the grid axiallity as a measure of connectivity and orientation, as in SS, as well as the built form as a measure of attraction, as in SI; (ii) activity location and flows strongly conditions urban spatial configuration change, in the long run. Location and flow patterns create values that are expressed by an increasing conflict between rising land values and declining building values. As a result, configuration is taken as a particular state of a morphology whose transformation rules are an economic expression of spatiality. Flows are cause and effect in the lagged process of mutual transformation which shapes the urban space.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9495
id	ddss9495
authors	Tombre, Karl and Paul, Jean-Claude
year	1994
title	Document Analysis: A Way To Integrate Existing Paper Information In Architectural Databases
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In any domain, the use of information systems leads to the problem of converting the existing archives of paper documents into a format suitable the computerized system. In this area, most attention has probably been given to structured document analysis, i.e. the automated analysis of business documents such as letters, forms, documentation, manuals etc., including the well-known area of character recognition. But document analysis is also a powerful tool in technical domains such as architecture, where large quantities of drawings of various kinds are available on paper. In this paper, we shortly present the state of the art in technical drawing analysis and propose some techniques suitable for the specific application of the conversion from paper to architectural databases.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9496
id	ddss9496
authors	Veenendaal, Martin H.
year	1994
title	Optimalization of Visualization: Graphical Diagonalization andClustering of Combinatorial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The analysis of combinatorial data is common to many disciplines as diverse as ethology, mathematics, computer science, psychology, demography, and architecture. Combinatorial data concern single relations that exist between the element pairs within one single pool of elements. TRI is a computer program that enables users to manually order combinatorial OTdangular) data matrices. "Ordering" in this context means placing high cell entries, coded as large dots, close together in clusters and close to the matrix's diagonal. Ordering, however, constitutes a very complex task. In order to support the ordering process, a straightforward measure has been developed which weighs the "amount" of clustering and diagonalization. The measure's value can be projected onto the monitor and perhaps serve as a "success indicator". A first experiment assessing the usefulness of the measure revealed that it does not consistently reflect subjective judgements of perceptual "order'. People may discern salient (although task irrelevant) patterns and regularities in dot configurations, for which the measure's cold calculus is insensitive [1]. In ongoing "human factors" experiments, the capability of experimental subjects to see through such "would be" order will be tested. One group will be amply instructed as to what the measure measures and how, and a second group will receive extensive visual instruction, using example matrices. The results of these and other experiments will help us decide whether or not to implement the measure in 1'RI, and how we can otherwise improve TRI as a powerful design and decision support tool.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9497
id	ddss9497
authors	Venemans, P., Daru, R. and Wagenberg, A. van
year	1994
title	Orientation in and Around Large Buildings: Guidelines and Architects
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Wayfinding and orientation problems for visitors of large buildings such as hospitals and offices are still prevalent in spite of a long tradition of research on spatial cognition. Analysis of suchproblems indicates that the characteristics of the building mainly cause these problems. These problems can be prevented by a design tool that aims at improving the orientation of users in large buildings, as changing a building afterwards is often expensive and impractical. As a base for such a design tool, guidelines are derived from the research on wayfinding and orientation. However, guidelines are only part of the solution. This design tool should be structured and presented in a form useful to architectural designers. In order to enhance its usefulness, architects of large public buildings studied a draft version of the tool and were interviewed about: (i) presentation form preferred for the tool and the guidelines, as well as the guideline contents; (ii) the function of the design tool with regard to the architects' design style; (iii) typical design solutions which specifically support or conflict with the guidelines; (iv) possible conflicts resulting from the guideline suggestions, in relation to other goals of the client or the architect. In the paper we discuss the results of the interviews and present our conclusions. We also demonstrate a prototype of the design tool.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9411
id	ddss9411
authors	Bouillé, Francois
year	1994
title	Mastering Urban Network Intersection And Superimposition, in an Object-oriented Knowledge System Integrating Rules, Neurons and Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many networks cover the urban texture, either superimposed at a variable distance, or really intersecting, or even in interconnection. We briefly recall the HBDS model, working on persistent abstract data types associated to graphical representations and carrying algorithms expressing conditions to be verified and/or actions to be performed. HBDS is an integrated system too, including database, expert system dealing with fuzzy rules and facts, discrete simulation engine, and neural engine; it has a general purpose programming language. Any urban network is associated to a given prototype, according to the same scheme named prototype with more specific components. These prototypes allow to build the different thematic structures instantiations of the prototypes. All possible cases of arc intersection or "pseudo-intersection" (simple superimposition)or interconnection are obtained by, owing to new prototypes. Moreover, such (pseudo)-intersections are automatically recognized and processed without a human intervention, owing to classes ofconstraints and classes of rules. They deal with particular constraints concerning the location of some urban furniture, and rules concerning the way a cable or a pipe must follow according to thepre-existing other networks in a given area, the minimal distances, minimal or maximal depths, and some required equipments. Urban classes of (pseudo-)intersections inserted in the hyperciass"neuron", inheriting of neural features, may be used for automated learning of urban knowledge; owing to their "behavior", these neurons can communicate and perform actions on other components. Urban classes inserted in the hyperciass "process" may be used for building very large models simulating complex urban phenomenons, thus allowing a better understanding of the real phenomenons. As a conclusion, we emphasize the methodological aspects of object-oriented integration for an efficient processing of the urban context, based on prototyping and mixing rules, neurons and processes.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9447
id	ddss9447
authors	Jabi, Wassim
year	1994
title	An Outline of the Requirements for a Computer Supported Collaborative Design System
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of specific rules and grammars. Yet, there is a general consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still cannot support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. Thus, if CAAD is to ultimately benefit the design process, it must (1) emulate and support the design team approach to architectural problem solving and (2) be deployed in the earliest possible stages of the design process. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the interaction between a set of requirements (the building program) and the architectural solution that satisfies them (the schematic design). The core of this interaction forms the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modelling (based on the NIAM notation), object-oriented algorithms, and distributed agents. Based on a literature survey and earlier findings on the role of artifacts in collaborative design, this paper outlines the requirements for the above system and reports on initial experiments. Thus, it constitutes the first stage of a research project that will lead to a full implementation of a distributed collaborative computer environment addressing the above issues.
series	DDSS
type	normal paper
email
last changed	2008/06/12 16:32

_id	0ecc
authors	Anh, Tran Hoai
year	1994
title	APPLICATION OF FULL-SCALE MODELLING IN VIETNAM: AN OUTLINE FOR DISCUSSION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary	This paper discusses the possibility of applying full-scale modelling in Vietnam, a non-western so called developing country. It deals with two main questions: 1) Is the application of full-scale modelling to be restricted to the West only? 2) what are the possibilities, constraints and fields of application - with attention to the methodological validity and technical solution for full-scale modelling in Vietnam? It is argued that since full-scale modelling is based on people-environment interaction, it should, in principle, apply to studies about people–environment relation anywhere on earth. On the methodological validity, it is discussed that application of full-scale modelling in Vietnam faces similar methodological problems as encountered in European applications (such as people's behaviour in experiment, ability to understand the abstraction of models, etc.) although at another level as this paper will make clear. However, it would be needed to design a modelling kit that is of low costs and adapted to the availability of local materials and suitable for the climatic condition of Vietnam. Two fields of application are projected as most applicable in Vietnam: modelling in architectural education and research investigation. Application for user's participation in the design process will depend on the development of building policy in the country.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
last changed	2004/05/04 11:00

_id	ddss9406
id	ddss9406
authors	Bakel, Anton P.M. van
year	1994
title	Assesing Strategy Questionnaire for Architectural Styles of Designing (ASQ-FASD)
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper the first results will be discussed that were obtained by the Assessing Strategy Questionnaire For Architectural Styles of Designing (ASQ-FASD). This questionnaire was developed specifically for the assessment of architectural design strategies. The construction of the questionnaire will be discussed in light of previous protocol research on strategic styles of designing. With this questionnaire, we developed a tool to assess an architects design strategy in a faster, easier and more reliable way than used to be the case with conventional protocol studies and other knowledge eliciting techniques like Card Sorting, and Repertory Grid. This questionnairewas submitted in a pilot study to 10 experienced Dutch architects. R.esults show that architects do indeed have preferences for different design situations. Moreover results indicate that they havea preference with respect to their responses within such specific situations. Though the generalizability coefficient was calculated for no more than 10 architects with a value of .57 (generalizing across situations), we feel that this is reason enough to assume that the questionnaire can be used to assess design strategies of architects. These results will be discussed with respect to the development of new design and decision support tools. The fact that designers have preferences for specific design problems and that they respond differently should be considered in the implementation of user interfaces and data base technology where possible.
series	DDSS
email
last changed	2003/08/07 16:36

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	67fd
authors	Brown, Paul
year	1994
title	Hype, Hope and Cyberspace -or- Paradigms Lost Pedagogical Problems at the Digital Frontier
doi	https://doi.org/10.52842/conf.ecaade.1994.007
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 7-12
summary	A number of critical issues and problems have evolved over the past 20 years as computers have been introduced into the art and design curriculum. This essay compares the pragmatic demands of tool usage and the metaphorical emulation of traditional media with the need for examination of fundamental issues.
series	eCAADe
last changed	2022/06/07 07:54

For more results click below: