Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 325

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9416
id	ddss9416
authors	Campbell, Noel and O'Reilly, Thomas
year	1994
title	GIS: Science or Tool - The Built Environment Perspective
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper attempts to locate GIS in the context of the built environment professions, rather than in the context of computer science, recognizing the integrated but limiting approach of viewingGIS from a strictly computer / spatial science perspective. The paper reviews the conflicts and tensions appearing in the GIS debate seeing them as reflecting the differences between the perceptions and interests of software developers and those of the professions. The "spatial science versus professional tool" dilemma is therefore critically assessed. Science is identified as the dominant paradigm within which GIS development has taken place. This encompasses the emphasis on GIS as spatial science; the interest in particular forms of spatial analysis; a narrow approach to the idea of information; the debate about the appropriate emphasis on the location for GIS in undergraduate education. The interests and activities of the professions cannot be encompassed within the pre-existing science paradigm. The paper identifies the interest the professions have had in broad geographical issues (as distinct from narrow spatial issues). It recognizes the different conventions and procedures used in recording and using geographical information, not all of them objective or scientific. It views the computer, not as a "scientific engine", but as a modern medium for representing and analyzing information. This includes storage and analysis, both internally (algorithmic manipulation) and outside (qualitative manipulation, beyond formal -"computer"- logic). This approach suggests a framework for research of a nature more sympathetic to the needs of the built environment professions in particular and an agenda which would include an examination of: (i) the conventions and procedures used in the professions to collect, store and process information and how these translate to computer technology; (ii) the types of software used and the way procedures may be accommodated by combining and integrating packages; (iii) the dynamism of GIS development (terms such as "dedicated", "mainframe", "PC-based", "distributed", "pseudo-", etc. are identified as indicativeof the need for professions-based approaches to GIS development); (iv) a critique of "information" (modelling of information flows within the professions, may yield valuable insights into the (modelling of information flows within the professions , may yield valuable insights into the similarity of requirements for a variety of "workplace scenarios").
series	DDSS
email
last changed	2003/08/07 16:36

_id	e751
id	e751
authors	Clayton, M.J., Kunz, J.C., Fischer, M.A. and Teicholz, P.
year	1994
title	First Drawings, Then Semantics
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 13-26
doi	https://doi.org/10.52842/conf.acadia.1994.013
summary	The Semantic Modeling Extension (SME) prototype implements a unique approach to integrated architectural CAD that places the drawing act first in the design process. After drawing a design idea using a computer graphic system, the designer interprets the design, providing semantic content to the graphic entities. An interpretation expresses the meaning of the design with respect to a particular issue, such as structural sufficiency, energy consumption, or requirements for egress, and provides reasoning to evaluate the design addressing that issue. A design may have many interpretations to express the multiple issues that are relevant in a design project. The designer may add or delete interpretations of the design as issues change during the course of the project. Underlying the SME prototype are the concepts of form, function and behavior. In the prototype, evaluation of a design is done by deriving behavior from the graphically represented forms and relating the behavior to stated functions or requirements. The concepts of interpretations and form, function and behavior together establish a virtual product model for design. In contrast to component based approaches to product modeling that tightly bind form representations to their behavior and function, a virtual product model allows the designer to manipulate the relations among these three descriptors of a design, and thus manipulate the semantics of the design entities. By distinguishing between the act of proposing a design by drawing the conceived form and the act of assigning meaning to the form, the virtual product model approach supports both graphic thinking for design synthesis and symbolic reasoning for design evaluation. This paper presents a scenario of the use of the SME prototype in building design; provides an analysis of the design process and computational support described in the scenario; contrasts a virtual product model approach with a component-oriented product model approach; describes the software implementation of SME; and presents implications and conclusions regarding design process and technical integration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	a887
authors	Kaplan, Nancy and Moulthrop, Stuart
year	1994
title	Where No Mind Has Gone Before: Ontological Design for Virtual Spaces Papers
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994 pp. 206-216
summary	Hypermedia designers have tried to move beyond the directed graph concept, which defines hypermedia structures as aggregations of nodes and links. A substantial body of work attempts to describe hypertexts in terms of extended or global spaces. According to this approach, nodes and links acquire meaning in relation to the space in which they are deployed. Some theory of space thus becomes essential for any advance in hypermedia design; but the type of space implied by electronic information systems, from hyperdocuments to "consensual hallucinations," requires careful analysis. Familiar metaphors drawn from physics, architecture, and everyday experience have only limited descriptive or explanatory value for this type of space. As theorists of virtual reality point out, new information systems demand an internal rather than an external perspective. This shift demands a more sophisticated approach to hypermedia space, one that accounts both for stable design properties (architectonic space) and for unforeseen outcomes, or what Winograd and Flores call "breakdowns." Following Wexelblat in cyberspace theory and Dillon, McKnight, and Richardson in hypermedia theory, we call the domain of these outcomes semantic space. In two thought experiments, or brief exercises in interface design, we attempt to reconcile these divergent notions of space within the conceptual system of hypermedia.
keywords	Spatial Hypertext; Interface Design; Information Mapping; Navigation
series	other
last changed	2002/07/07 16:01

_id	ddss2004_d-49
id	ddss2004_d-49
authors	Polidori, M. and R. Krafta
year	2004
title	Environment – Urban Interface within Urban Growth
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary	This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords	Environment, Urban Growth, Urban Morphology, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9407
id	ddss9407
authors	Barrett, P., Baldry, D., Sexton, M. and Stanley, C.
year	1994
title	Key Decisions Within a Generic FM Framework
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Based on extensive fieldwork a generic framework for the facilities management function will be presented within wich a comprehensive range of decisions related to key relationships will be identified. Examples will be given of the application of the framework to a wide range of organisation types. The decision types(pricipally strategic v operational) and techniques to identify which is being confronted will be prposed. Examples will be provided of how, in practice, different organisations approach a given type of decision in a variety of ways.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9408
id	ddss9408
authors	Bax, Thijs and Trum, Henk
year	1994
title	A Taxonomy of Architecture: Core of a Theory of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The authors developed a taxonomy of concepts in architectural design. It was accepted by the Advisory Committee for education in the field of architecture, a committee advising the European Commission and Member States, as a reference for their task to harmonize architectural education in Europe. The taxonomy is based on Domain theory, a theory developed by the authors, based on General Systems Theory and the notion of structure according to French Structuralism, takes a participatory viewpoint for the integration of knowledge and interests by parties in the architectural design process. The paper discusses recent developments of the taxonomy, firstly as a result of a confrontation with similar endeavours to structure the field of architectural design, secondly as a result of applications of education and architectural design practice, and thirdly as a result of theapplication of some views derived from the philosophical work from Charles Benjamin Peirce. Developments concern the structural form of the taxonomy comprising basic concepts and levelbound scale concepts, and the specification of the content of the fields which these concepts represent. The confrontation with similar endeavours concerns mainly the work of an ARCUK workingparty, chaired by Tom Marcus, based on the European Directive from 1985. The application concerns experiences with a taxonomy-based enquiry in order to represent the profile of educational programmes of schools and faculties of architecture in Europe in qualitative and quantitative terms. This enquiry was carried out in order to achieve a basis for comparison and judgement, and a basis for future guidelines including quantitative aspects. Views of Peirce, more specifically his views on triarchy as a way of ordering and structuring processes of thinking,provide keys for a re-definition of concepts as building stones of the taxonomy in terms of the form-function-process-triad, which strengthens the coherence of the taxonomy, allowing for a more regular representation in the form of a hierarchical ordered matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss9414
id	ddss9414
authors	Bright, Elise N.
year	1994
title	THe "Allots" Model: A PC-Based Approach to Demand Distribution for Siting and Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper reports on the development and application of ALLOT: a user-friendly, flexible computer model which has been designed to help governmental jurisdictions and private landowners throughout the world to achieve more economically efficient and environmentally sound land use and development patterns in a short period of time. ALLOT has the potential to drastically change the way that land use planning is conducted, since it has the capability to allow theincorporation of a wide variety of previously ignored environmental characteristics and up-to-date land use patterns. ALLOT, which is written in the SAS programming language, contains twomajor parts. The first part employs a GIS database to conduct land suitability analyses for the area. It then produces maps showing the most suitable areas for various land use types. The second part appears to be unique in the field of computerized land use planning models. It combines the results of the suitability analysis with forecasted demand for various land use types to produce "optimum" future land use patterns. The model is capable of quickly analyzing a wide variety of forecasts, allowing easy comparison of different growth scenarios; and it can also be modified to reflect community goals and objectives, such as protection of wildlife habitat orattraction of industry. The flexibility, combined with the fact that it runs on any IBM-compatible PC (286 or higher), make it a powerful land use planning tool. The model has been successfully applied in two "real world" situations. First, three alternative future land use patterns were developed for a rural lakeside area. The area had rural characteristics and was lacking infrastructure, but a large influx of people was expected as the lake was filled. The success of this effort led to decision to test it´s use as a method for facility siting (using landfill siting as an example).
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9422
id	ddss9422
authors	Daru, Roel and Snijder, Philip
year	1994
title	Sketch-Trigger: A Specification for a Form Generator and Design Analysis Toolbox for Architectural Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In order to develop design and decision support techniques in the early sketch design phases, weshould (1) experience and (2) observe real behaviour in practice, (3) transform observations intoideas for improvement, (4) develop behaviour models to explain the sketch design activities and(5) to evaluate between the proposals, (6) decide between the alternatives, (7) implement theselected option in a supporting tool. Our paper reports about the results of step 3 in particular inthe first phase of a Ph D project, started this year. Our main objective is to amplify the effects ofthe sketch as a very effective instrument to generate original forms and to stimulate the mind to discover new shapes and meanings in the roughly sketched patterns. Instead of considering the sketch only as a representation of what the designer has in mind as is usually assumed in CAD systems, we see sketching as form activation. Thus, we want also to offer triggering images to spark off the imagination of the designer while generating images which are practically impossibleto create by hand and certainly not at short notice. The main improvement proposed is the use of an evolutionary form breeding system: one or more sketched parent images (either ready-made'partis' or basic schemes drafted by the designer) presented in the centre of the screen, will generate surrounding mutated children as defined at random but constrained by default or customization of the available transformations. By selecting one or more children a next generation will be produced in the same way. At all times the designer can introduce or reduce constraints. To complete the usually offered 'classical' symmetrical, spatial and logical operations,we want to introduce dis-functional operations like dislocation, explosion, deformation, anti-logic etc, in short all kinds of antagonistic operations, among them the transformations applied indeconstructionist and post-modern design. Our expectation is that these operations will correspond roughly to the 'move' pertaining to a design entity as the operational unit most appropriate for design behaviour research, in particular the analysis of the chunking and parsing behaviour of the designer. The applicability of the 'move' approach has been shown experimentally by Habraken and others. Goldschmidt has abandoned the usual typology approach of protocolanalysis based on moves and concentrated on the linking of moves, but has been hampered by the lack of a good representational instrument. This brings us to the representation of moves and linkages as a research instrument. The 'linkograph' approach as proposed by Goldschmidt is a first step towards a graphical representation of the designers associative reasoning mode, necessary for tracking the heuristics of designers at the most basic level, but its practical implementation remained as yet incredibly laborious. What is proposed here is an instrument and approach which makes such registration and analysis possible within a structured software environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	3e74
authors	Dasgupta, S.
year	1994
title	Creativity in Invention and Design
source	Cambridge University Press
summary	In this book, creativity in technology is discussed using a computational approach. Examining an important historical episode in computer technology as a case study, namely, the invention of microprogramming by Maurice Wilkes in 1951, the author presents a plausible explanation of the process by which Wilkes may have arrived at his invention. Based on this case study, the author has also proposed some very general hypotheses concerning creativity that appear to corroborate the findings of some psychologists and historians and then suggests that creative thinking is not significantly different in nature from everyday thinking and reasoning.
series	other
last changed	2003/04/23 15:14

_id	af8b
authors	Dave, B., Schmitt, G., Faltings, B. and Smith, I.
year	1994
title	Case-based design in Architecture
source	J.S. Gero and F. Sudweeks (eds.), the proceedings of Artificial Intelligence in Design '94, pp.145-162
summary	Computational support in the domain of building design is hampered by the need to control generation and search processes both of which are elusive due to the lack of strong domain theories. Case based reasoning paradigm may be useful to overcome some of these difficulties. A case based design system is presented here that enables case adaptation and case combination of design cases to generate new design solutions more efficiently. Some issues in our approach that are different from other projects with similar aims are also discussed.
series	other
email
last changed	2003/04/23 15:50

_id	ddss9424
id	ddss9424
authors	Dave, Bharat and Schmitt, Gerhard
year	1994
title	Information Systems for Spatial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes a continuing research project aimed at the development of a prototype information system to represent and manipulate models of urban settlements. This inter-disciplinaryproject involves researchers and teachers in the fields of urban design, photogrammetry and CAD. Based upon the requirements identified by the urban design team, the photogrammetry teamused aerial imagery to produce accurate digital models of various features of urban settlements. The models comprise natural features like terrain data, water and vegetation systems, and man made features like transportation networks, land parcels, and built-up volumes. These data are represented in the three dimensions, and they are further linked with nongraphic attributes stored in an external database schemata. The architecture of the system under development has been described previously. In this paper, we focus on the generation of thematic abstractions. The working hypothesis for our current work is that (i) to enable reliable decision-making in urbandesign contexts, we require digital models that are complete and accurate at a certain degree of resolution, and (ii) during various stages in the decision-making, we need useful abstractionswhich encode only the salient information and no more. In more specific terms, we are interested in finding computational means to automatically generate schematic generalizations of data that succinctly represent some information without recomputing or displaying all the vectrs and other details. In this papar we present some of the strategies that we employ to support such operations in our system and also present graphic examples that demonstrate the potential andlimitations of our approach.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ddss9427
id	ddss9427
authors	Engelen, Guy and White, Roger
year	1994
title	A Strategic Planning and Policy Decision Support Tool for Urban Regions
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper we present a Decision Support System developed to assist urban designers, planners and policy makers to explore and evaluate possible urban layouts and their growth patterns. Thecore of the system consists of a modelling shell allowing the user to specify cellular automata based models of urban and regional systems. These models capture the effect of local spatial processes in which the use, or desired use of each parcel or cell of land is determined partly by institutional and environmental factors, and partly by the activities present in its neighbourhood. Since each cell affects every other cell within its neighbourhood, a complex dynamic emerges. Unlike conventional cellular automata, the models are defined with a large neighbourhood --over a hundred cells-- a relatively large number of states --more than a dozen in some applications-- representing socio-economic and natural land-uses. The approach permits the straightforward integration of detailed physical, environmental, and institutional constraints, as well as including the effects of the transportation and communication infrastructure. These models thus permit a very detailed representation of evolving spatial systems. The current version of the system represents urban areas as consisting of up to 10.000 interacting zones, each roughly the size of an individual city block. These models are easy to build and apply, yet empirical tests show that they produce realistic simulations of urban land use dynamics. Consequently, they are well suited to form the heart of the DSS, which provides the user with a number of tools for exploration,analysis and evaluation of alternative futures of the system as they result from policy interventions that are imposed by means of what-if experiments and scenario analysis. For example, the DSS isable to identify areas in which pressure for change in land use restrictions may become critical under particular development strategies. In the DSS, the modelling shell is coupled to a simple,custom-built GIS. In the stand-alone application of the DSS, this stores the detailed geographical qualities of the area being modelled, and allows basic overlay manipulations. It also displays theresults of the model while the simulation proceeds. Alternatively, the GIS can serve as aninterface to more elaborate, commercial GIS systems.
series	DDSS
email
last changed	2003/08/07 16:36

_id	de4c
authors	Flemming, U., Coyne, R. and Snyder, J.
year	1994
title	Case-based design in the SEED system
source	K. Khozeimeh ed., Computing in Civil Engineering, Volume 1, Proceedings of the First Congress held in conjunction with the A/E/C Systems `94, Washington, DC, June 20-22, 1994, New York: American Society of Civil Engineers
summary	We present the requirements for case-based design in a software environment to support the early phases in building design and outline an approach to satisfy them. We briefly discuss implementation issues and the larger information management context for the work.
series	other
email
last changed	2003/04/23 15:50

For more results click below: