Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 357

Reformat results as: short short into frame detailed detailed into frame

_id	e5d0
authors	Lowe, John P.
year	1994
title	Computer-Aided-Design in the Studio Setting: A Paradigm Shift in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 230
doi	https://doi.org/10.52842/conf.ecaade.1994.x.g6j
summary	The introduction of the personal computer in 1982 set forth a revolution that will continue to transform the profession of Architecture. Most architectural practices in America have embraced this revolution realizing the potentials of the computer. However, education seems to have been slower accepting the potentials and challenges of computers. Computer technology will change the design studio setting and therefore the fundamental way architects are educated. The Department of Architecture at Kansas State University has made a commitment to move toward a computer based design studio. In the fall of 1990, discussions began among the faculty to search for the placement of a computer studio within the five year program. Curriculum, staffing, and funding were issues that had to be overcome to make this commitment work. The strategy that was adopted involved placing the computer studio at the fourth year level in phase one. Phase two will progress as more staff are trained on the computer and course work was adapted to accommodate other year levels for a computer based design studios. Funding was a major obstacle. The decision was made to move from a position of being the primary suppliers of computing technology to one of support for student purchased computers. This strategy alleviated the department from maintaining and upgrading the technology. There was great enthusiasm and support from the faculty as a whole for the use of computers in the studio setting. However, the pedagogical impacts of such a change are just beginning to be realized.
series	eCAADe
last changed	2022/06/07 07:50

_id	4f13
authors	Ronchi, Alfredo M.
year	1994
title	A Brief History of CAAD in Italy
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 227
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f3n
summary	Twenty years of revolution, from the middle '70 to the middle '90. Many things have changed since the origins of computer graphics and computer aided design in architecture. We started teaching drafting on terminals which connected to mini computers, complex procedures or sets of graphics libraries working with keywords, vectors and storage screens. The next step was devoted to the discovery of workstations in the early '80's, where the user sat face on to the whole power of a multitasking system. At that time to use up to 16 time sharing processes running on the same work station seemed to have no practical use at all. Fortunately someone (ie Xerox PARC laboratories) at the same time started to develop the so-called GUI. Graphical user interface started a revolution in human/machine interface (ie Smalltalk). The desktop metaphor, the use of multiple windows and dialogues joined with icons and pop up menus let the user manage more applications and, even more important, created a standard in application/user interface (CUA). In the meantime focus had moved from hardware to software, systems being chosen from the software running. The true revolution we have seen starting from that base and involving an ever increasing number of users was the birth of PC based applications for CAAD. Generally speaking nowadays there are three main technologies concerning teaching: communication, multimedia and virtual reality. The first is the real base for future revolution. In the recent past we have started to learn how to manage information by computers. Now we can start to communicate and share information all over the world in real time. The new age opened by fax, followed by personal communication systems and networks is the entry point for a real revolution. We can work in the virtual office, meet in virtual space and cooperate in workgroups. ATM and ISDN based teleconferencing will provide a real working tool for many. The ever increasing number of e-mail addresses and network connections is carrying us towards the so called 'global village'. The future merger between personal digital assistant and personal communication will be fascinating. Multi & HyperMedia technology is, like a part of VR, a powerful way to share and transfer information in a structured form. We do not need to put things in a serial form removing links because we can transfer knowledge as is. Another interesting and fundamental aspect typical of VR applications is the capability to change cognitive processes from secondary (symbolic - reconstructive) to primary (perceptive - motory). In this way we can learn by direct experience, by experiment as opposed to reading books. All these things will affect not only ways of working but also ways of studying and teaching. Digital communications, multimedia and VR will help students, multimedia titles will provide different kinds of information directly at home using text, images, video clips and sounds. Obviously all those things will not substitute human relationship as a multimedia title does not compete against a book but it helps.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9401
id	ddss9401
authors	Akin, Omer
year	1994
title	Psychology of Early Design in Architecture
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Lately there has been a good deal of emphasis on the early stages of the design process, particularly by developers of computer aids and quantitative design models for both evaluation and generation of designs in a variety of domains. Yet, there is little understanding of the early design-process. While the early design process as manifested by human designers need not be the sole basis of the description of this phase, it certainly represents and important kernel of knowledge, especially for those who are interested in developing models, systems or merely interfaces for such systems. This paper focuses on the characterization of the psychology of the early design phase in architecture. It is described in terms of the general design strategies and problem solving tactics used; and is contrasted against some of the process characteristics that
series	DDSS
email
last changed	2003/08/07 16:36

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0574
authors	Alison Murison and James Gray
year	1994
title	Spatial Analysis for Museum Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 201-206
doi	https://doi.org/10.52842/conf.ecaade.1994.201
summary	The paper describes how a specially written customisation of AutoCAD enables students of Architecture to use the method of spatial analysis called Space Syntax developed by Professor Bill Hillier of the Bartlett School of Architecture, London, to examine a number of existing museums, to compare the findings against other criteria, and to draw conclusions about the strategy adopted in museum design. Simple interactive graphics enable plans to be entered and compared, so that they may be evaluated during the design process, with decisions supported by objective tests. This improves both design decisions and the learning process.
series	eCAADe
last changed	2022/06/07 07:54

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	e807
authors	Anadol, Z., and Akin, O.
year	1994
title	Determining the impact of cad drafting tools on the building delivery process
source	The Int. Journal of Construction IT 2(1), pp.1-8
summary	Computer aided design is intended to change the way design and construction are carried out. at a minimum, this implies savings realized in terms of time spent and improvement of the quality of designs produced. to test this idea, we hypothesized that computer aided drafting and design operations may be instrumental in reducing the number of change orders issued and help control cost overruns by improving the accuracy of construction documents. we compared change orders in projects designed in the conventional media against ones developed with computers. we found that there is evidence supporting our hypothesis. furthermore, in the process of investigating this question, we found that computer applications to improve the management of existing building information (as-built drawings, building system related information, and the like) represent even more critical needs than those that can reduce change orders through more accurate design drawings.
series	journal paper
last changed	2003/05/15 21:45

_id	241b
authors	Anderson, Lee
year	1994
title	Film Theory and Architectural Design
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 219-227
doi	https://doi.org/10.52842/conf.acadia.1994.219
summary	This paper describes a 10 week, 3rd year architectural design studio, taught by the author, that explored the use of film and video techniques in the design process. The exploration was of (1) the potential of recently available personal computer software and hardware for image and video capture, manipulation and recording, and (2) the potential for application of video, informed by film theory, in the early stages of architectural design.
series	ACADIA
last changed	2022/06/07 07:54

_id	ddss9404
id	ddss9404
authors	Arima, Takafumi and Sato, Seiji
year	1994
title	Form Characteristics of Landscape Images: A Landscape Research by Computer Image Processing
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Landscape evaluation research examines how individuals perceive the landscape. Because the amount of the data to describe landscapes is huge, landscape research needs the technology of the computer. This paper describes a method to catch the amount of physical characteristics which were extracted from landscape images by using the technology of the computer image processing and verifies its effectiveness. To do this analysis, we took photographic slides of a landscape sample. Pictures were taken for three regions (the city centre area, the outskirts area, and the farm village area). The number of slides was 6 for each place hence 18 in total were used for theanalysis. Next, we stored these slides on a computer disk. Form characteristics of the landscape elements were extracted by using computer image processing. Borderlines were extracted usingthe algorithm of Robert and were converted into coordinates data by minute line processing and the vector processing. Other elements were extracted by label processing and were converted into the coordinates data by vector processing. These data thus are the vector data for two-dimensions of the image and not the data for a three-dimension space. The processing of these images enables the analysis of the form characteristics in the landscape images. We calculated the data such as appearing length, angle numbers of appearance of the vector data, and analyzed the characteristic of shape and the complexities of landscape applying fractal theory. We compared three districts and were able to find landscape characteristics of various places as a result.
series	DDSS
last changed	2003/08/07 16:36

_id	ca51
authors	Asanowicz, Aleksander
year	1994
title	CAFE: Composition for Architects - Forms and Emotions
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 249
doi	https://doi.org/10.52842/conf.ecaade.1994.x.l3s
summary	In the architectural creation process there has always been an inclination to improve the methods of designing in the way of ,,objectivization" of designing process. Objectivization which would explain why we do design in this way and not the other. In spite of the trend to the total objectivization (Vitruvius, Alberti, Palladio), the results appeared to be still subjective, i.e. they included methods of designing typical of the one and only architect. This fact made them completely useless in the designing practice. On the other hand one cannot underestimate their meaning as to this very practice. Because it is just thanks to them that the development of designing studies has taken place. We do learn not only watching works of great architects, but also studying their opinions concerning problems of form, function and construction. That is why it seems to be useful to collect experiences concerning the classic theory of architectural composition, which have been gathered through centuries, as well as to try once again to objectivize the process. Composition information arranged in the form of data-base would create the ground for proper functioning of an expert system uniting diagnostic and planning functions. Study of that kind, not claiming design applications could be an excellent educational equipment in teaching architectural composition. In the proposed teaching system attempts have been made to look at the architectural composition theory in the light of the perception of the form, and - emerging in this process - emotional and aesthetic evaluations. In order to define which evaluations have been most often expressed during the perception process of architectural forms, the students of Architecture Faculty in Bialystok Technical University have been polled on the subject: ,,Which words are most commonly used in the descriptions of architecture works?"
series	eCAADe
email
last changed	2022/06/07 07:50

_id	c5a9
authors	Batty, M. and Longley, P.
year	1994
title	Fractal Cities - A Geometry of Form and Function
source	Academic Press, London
summary	Fractal Cities is a pioneering study of the development and use of fractal geometry for understanding and planning the physical form of cities, showing how this geometry enables cities to be simulated through computer graphics. It shows how cities evolve and grow in ways that at first sight appear irregular, but which, when understood in terms of fractals, illustrate an underlying order that reveals their complexity and diversity. The book contains sixteen pages of stunning computer graphics and explanations of how to construct them, as well as new insights into the complexity of social systems. The authors provide a gentle and intelligible introduction to fractal geometry as well as an exciting visual understanding of the form of cities, thus providing one of the best introductions to fractal geometry available for non-mathematicians and social scientists. Fractal Cities can be used as a text for courses on geographic information systems, urban geography, regional science and fractal geometry. Planners and architects will also find that there are many aspects of fractal geometry in this book relevant to their own interests. Furthermore, those involved in fractals and chaos, computer graphics, and systems theory will find important methods and examples that are germane to their work.
series	other
last changed	2003/04/23 15:14

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
doi	https://doi.org/10.52842/conf.ecaade.1995.355
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
doi	https://doi.org/10.52842/conf.ecaade.1994.185
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
doi	https://doi.org/10.52842/conf.ecaade.1994.163
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ddss9413
id	ddss9413
authors	Branki, Cherif
year	1994
title	Communicative Acts in Cooperative Architectural Design Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a scheme, that can be used to support the communication process in cooperative design. Computational aids for design have largely been for a designerworking by himself/herself. These aids have also been supplemented by the widespread use of artificial intelligence approaches. However, design is so complex, and very rarely acted upon by a single designer but many more working towards the same aim. This involves a new paradigm in which designers need to cooperate with each other using a computational medium. A protocol analysis in cooperative design has been carried out and technological support has been proposed.Cooperative design becomes an important paradigm for the next generation of intelligent computer aided design systems. It will be conducted in many forms among several designers and willrequire the support of advanced communication facilities beyond the "passive" transmission of data and messages. Technological advances in communication networks have opened up new ways for cooperative design interaction across several processes of cooperation among designers, designers and computer aided design systems, computer aided design systems and knowledge based systems, and knowledge based systems themselves. In cooperative design environments, aunit of communication among designers is the transfer of a message from one designer (a sender) to another (a receiver). The aim of such communication is to provide the receiver with some information or to have the receiver take certain actions. Inspired by the speech act theory, a branch of the philosophy of language and linguistics, such a unit is called a communicative act. By analogy to architectural design, a communicative act is a performing act in designers communication.
series	DDSS
email
last changed	2003/08/07 16:36

_id	diss_brewster
id	diss_brewster
authors	Brewster, S.A.
year	1994
title	Providing a Structured Method for Integrating Non-Speech Audio into Human-Computer Interfaces
source	Heslington, York: University of York
summary	This thesis provides a framework for integrating non-speech sound into human-computer interfaces. Previously there was no structured way of doing this, it was done in an ad hoc manner by individual designers. This led to ineffective uses of sound. In order to add sounds to improve usability two questions must be answered: What sounds should be used and where is it best to use them? With these answers a structured method for adding sound can be created. An investigation of earcons as a means of presenting information in sound was undertaken. A series of detailed experiments showed that earcons were effective, especially if musical timbres were used. Parallel earcons were also investigated (where two earcons are played simultaneously) and an experiment showed that they could increase sound presentation rates. From these results guidelines were drawn up for designers to use when creating usable earcons. These formed the first half of the structured method for integrating sound into interfaces. An informal analysis technique was designed to investigate interactions to identify situations where hidden information existed and where non-speech sound could be used to overcome the associated problems. Interactions were considered in terms of events, status and modes to find hidden information. This information was then categorised in terms of the feedback needed to present it. Several examples of the use of the technique were presented. This technique formed the second half of the structured method. The structured method was evaluated by testing sonically-enhanced scrollbars, buttons and windows. Experimental results showed that sound could improve usability by increasing performance, reducing time to recover from errors and reducing workload. There was also no increased annoyance due to the sound. Thus the structured method for integrating sound into interfaces was shown to be effective when applied to existing interface widgets.
series	thesis:PhD
email
more	http://www.dcs.gla.ac.uk/~stephen/publications.shtml
last changed	2003/11/28 07:34

_id	5dff
authors	Bricken, M.
year	1994
title	Virtual Worlds: No Interface to Design
source	Cyberspace - First Steps, M.Benedikt ed, MIT Press
summary	In a virtual world, we are inside an environment of pure information that we can see, hear, and touch. The technology itself is invisible, and carefully adapted to human activity so that we can behave naturally in this artificial world. We can create any imaginable environment and we can experience entirely new perspectives and capabilities within it. A virtual world can be informative, useful, and fun; it can also be boring and uncomfortable. The difference is in the design. The platform and the interactive devices we use, the software tools and the purpose of the environment are all elements in the design of virtual worlds. But the most important component in designing comfortable, functional worlds is the person inside them. Cyberspace technology couples the functions of the computer with human capabilities. This requires that we tailor the technology to people, and refine the fit to individuals. We then have customized interaction with personalized forms of information that can amplify our individual intelligence and broaden our experience. Designing virtual worlds is a challenging departure from traditional interface design. In the first section of this chapter I differentiate between paradigms for screen-based interface design and paradigms for creating virtual worlds. The engineer, the designer, and the participant co-create cyberspace. Each role carries its own set of goals and expectations, its own model of the technology's salient features. In the second section of the chapter I address these multiple perspectives, and how they interrelate in the cooperative design process. In conclusion, I consider broader design issues, including control, politics, and emergent phenomena in cyberspace.
series	other
last changed	2003/11/21 15:16

_id	28dd
authors	Bridges, Alan
year	1994
title	Architectural Computing Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 226
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v5x
summary	Many papers at previous eCAADe conferences have discussed CAD curricula, but few have questioned the educational objectives of teaching CAD. I wish to use this short paper to discuss not only what should be taught but why and how it should be taught. Topics covered include: styles of teaching and learning; individual or group working; and principles versus practicalities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9414
id	ddss9414
authors	Bright, Elise N.
year	1994
title	THe "Allots" Model: A PC-Based Approach to Demand Distribution for Siting and Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper reports on the development and application of ALLOT: a user-friendly, flexible computer model which has been designed to help governmental jurisdictions and private landowners throughout the world to achieve more economically efficient and environmentally sound land use and development patterns in a short period of time. ALLOT has the potential to drastically change the way that land use planning is conducted, since it has the capability to allow theincorporation of a wide variety of previously ignored environmental characteristics and up-to-date land use patterns. ALLOT, which is written in the SAS programming language, contains twomajor parts. The first part employs a GIS database to conduct land suitability analyses for the area. It then produces maps showing the most suitable areas for various land use types. The second part appears to be unique in the field of computerized land use planning models. It combines the results of the suitability analysis with forecasted demand for various land use types to produce "optimum" future land use patterns. The model is capable of quickly analyzing a wide variety of forecasts, allowing easy comparison of different growth scenarios; and it can also be modified to reflect community goals and objectives, such as protection of wildlife habitat orattraction of industry. The flexibility, combined with the fact that it runs on any IBM-compatible PC (286 or higher), make it a powerful land use planning tool. The model has been successfully applied in two "real world" situations. First, three alternative future land use patterns were developed for a rural lakeside area. The area had rural characteristics and was lacking infrastructure, but a large influx of people was expected as the lake was filled. The success of this effort led to decision to test it´s use as a method for facility siting (using landfill siting as an example).
series	DDSS
last changed	2003/08/07 16:36

For more results click below: