Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 354

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9406
id	ddss9406
authors	Bakel, Anton P.M. van
year	1994
title	Assesing Strategy Questionnaire for Architectural Styles of Designing (ASQ-FASD)
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper the first results will be discussed that were obtained by the Assessing Strategy Questionnaire For Architectural Styles of Designing (ASQ-FASD). This questionnaire was developed specifically for the assessment of architectural design strategies. The construction of the questionnaire will be discussed in light of previous protocol research on strategic styles of designing. With this questionnaire, we developed a tool to assess an architects design strategy in a faster, easier and more reliable way than used to be the case with conventional protocol studies and other knowledge eliciting techniques like Card Sorting, and Repertory Grid. This questionnairewas submitted in a pilot study to 10 experienced Dutch architects. R.esults show that architects do indeed have preferences for different design situations. Moreover results indicate that they havea preference with respect to their responses within such specific situations. Though the generalizability coefficient was calculated for no more than 10 architects with a value of .57 (generalizing across situations), we feel that this is reason enough to assume that the questionnaire can be used to assess design strategies of architects. These results will be discussed with respect to the development of new design and decision support tools. The fact that designers have preferences for specific design problems and that they respond differently should be considered in the implementation of user interfaces and data base technology where possible.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9420
id	ddss9420
authors	Christie, Colin Ian
year	1994
title	User Interfaces and Systems for Remote Design Working on ISDN Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper will discuss the requirements and possible configurations of user interfaces suitable for remote working multi-disciplinary design practices. Telecom companies throughout Europe are making heavy investments in digital communication technology (ISDN). The networks being created will form a standard method of high speed data transfer which can be readily accessed by any computer hardware platform. There are great opportunities for remote working by design groups, not simply sharing data but also interactive working and video communications. Digital communications provide the electronic arterial system to the new field of remote computing,whilst cheap and effective hardware and software support systems provide readily usable platforms on which to build remote multi-disciplinary design practices where the exploitation of specialistknowledge and skills is not limited by traditional methods of communication. ISDN networks allow real time video, voice and design software interaction - indeed, everything except the designer's physical presence. However as with all computer technology and indeed communications technology the user interface which gives access and control is vitally important. The user interface should provide the following features: be transparent to the user and simple and reliable to operate; allow an interactive window/s into the remote site's design information whatever the type of application being dealt with; carry out data compression, file transfer and file management procedures with minimum input from the user; cause no conflicts with design software or secondary applications;be able to access different platforms.
series	DDSS
last changed	2003/08/07 16:36

_id	a378
authors	Friedell, M., Kochhar, S., Marks, J., Sistare, S. and Weitzman, L.
year	1994
title	Cooperative design, Human-computer interaction, Interaction techniques, Graphical user interfaces, Design automation, Design methodologies, Automated design of graphical displays, Computer-aided design
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp.187-188
summary	Computer-aided-design (CAD) systems are now used to design all kinds of artifacts, from jet fighters to works of art. A major challenge in the design of a CAD system itself is the user interface (UI). Developing the UI to a CAD system raises myriad questions about input devices and techniques, display devices and techniques, and the details of the dialogue that relates the two. But these questions are ancillary to one central question: what is the fundamental nature of the interaction between human and computer in the design process supported by the CAD system? Is the design activity essentially manual, with the computer playing the role of passive tool, like a pen or paintbrush? Or is the computer augmenting the human designer by actively restricting available design choices, or by playing the role of critic or "improver"? Or maybe the interaction paradigm is one of "interactive evolution," in which the computer is responsible for generating design alternatives, with the human merely choosing among choices suggested by the machine. Or perhaps the computer performs the design process completely automatically, with a final acceptance check being the only human contribution? The panelists will describe these different paradigms for human-computer cooperation in a set of related CAD systems and prototypes and discuss the conditions under which each paradigm might be most useful.
series	other
last changed	2002/07/07 16:01

_id	ddss9475
id	ddss9475
authors	Pollalis, Spiro N.
year	1994
title	Visual Databases as Documentation and On-Line Information Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	After the wide-spread use of computers as task processors, either for algorithmic operations, or for advanced interfaces, the emphasis has shifted on computers as communicators. Beyond basic serial communications, computers serve as providers of information, linking organizations and expanding the bounded rational of professionals. Based on the use of computers as communica-tors, a multiplicity of visual databases for architecture have emerged in the recent years. Building on a maturing technology, those databases address different domains of design, either aiming to provide the designers with information for making informed decisions, or aiming to document prior designs. However, a common characteristic of those visual databases is a separation between the design of the database, versus the entering of the critical amount of data that can make the databases useful. While the research has progressed in the designs, and technological problems of data presentation and data transfer have reached workable solutions, most of the efforts have not succeeded yet in providing the critical mass of information that is required to make the use of the databases desirable. Furthermore, this effort seems as having less research interest, while the necessary amounts of data, and especially the updating of those data, makes the task impossible for academic institutions, and requires interorganizational efforts. This paper focuses on the duality of the databases, either as a form of documentation, or as on-line interactive information systems. Based on that distinction, it examines the required technology and the critical success factors of each type, and proposes that these databases add value to design and they have considerable market effects, which will drive their development and diffusion.
series	DDSS
email
last changed	2003/08/07 16:36

_id	89a8
authors	Smeltzer, Geert T.A.
year	1994
title	Virtual Reality in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.e4i
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 244
summary	This short presentation will describe the application of a Virtual Reality system for the architectural design process. This is based on the results of research into 6 technology and in particular on the possibilities of a natural interface between a designer and a design system. This description is also based on the development of a laboratory setup for a “fully immersive” (all-round representation) and a “partially immersive” (stereo representation) 6 application. This application offers a designer the possibility of modify-ing and assessing a 3D design model in “Virtual Reality” This presentation is mainly based on the use of Virtual Reality in the course of several case studies. One of these case studies was the making of a presenta-tion of a design to possibly interested parties. The other case study was the use of Virtual Reality in the course of a design process. Finally this publication includes the description of some future and anticipated developments. The research problem is mainly posed by the questions regarding the ways in which the design process changes under the influence of, amongst other factors, the 6 technology. Other questions concern the ways in which the interface between a designer and a design system can be made as natural as possible, the way in which a design model can be made as autonomous as possible, and the way in which a representation can be made as realistic as possible. With regard to these the starting points were respectively the use of sensors, behaviour characteristics and illumination simulations. The development problem is posed by the question regarding the way in which a laboratory setup, in cooperation with a supplier of hardware (Sun Microsystems Nederland BV) and a supplier of software (Autodesk Benelux BV), can be developed. In order to do this use has to be made of their system components, such as workstations and CAD software. Another problem for the development of the laboratory setup is the way in which the project was to be made to lead to presentations and demonstra-tions of 6 technology which was still not yet generally available. The first case study was the development of a 6 presentation of a housing project. This presentation was in the first instance intended for people who had an interest in the project. In addition, naturally, people who really only had an interest in Virtual Reality itself also attended. The presentation was announced as being a first Virtual Open House. Each interested party could wander through the 3D design model and move the furniture. In the course of this case study consideration was above all given to the relationships between the interfaces between the user and the system, the level of detail of the model and the speed of the representation. The second case study was the use of Virtual Reality during a design process. The system is used for the evaluation of visibility and safety aspects of another housing project. The use of the system was initially only intended for the designer and the principal. At the end of the process different design modifications were effected in accordance with their evaluations of the design. After that the system was also used for internal presentations of the applications as well as of the technology. The problem which played a role in the course of these studies was in the first instance a design problem and in the second in-stance a technical problem.
series	eCAADe
last changed	2022/06/07 07:50

_id	48a7
authors	Brooks
year	1999
title	What's Real About Virtual Reality
source	IEEE Computer Graphics and Applications, Vol. 19, no. 6, Nov/Dec, 27
summary	As is usual with infant technologies, the realization of the early dreams for VR and harnessing it to real work has taken longer than the wild hype predicted, but it is now happening. I assess the current state of the art, addressing the perennial questions of technology and applications. By 1994, one could honestly say that VR "almost works." Many workers at many centers could doe quite exciting demos. Nevertheless, the enabling technologies had limitations that seriously impeded building VR systems for any real work except entertainment and vehicle simulators. Some of the worst problems were end-to-end system latencies, low-resolution head-mounted displays, limited tracker range and accuracy, and costs. The technologies have made great strides. Today one can get satisfying VR experiences with commercial off-the-shelf equipment. Moreover, technical advances have been accompanied by dropping costs, so it is both technically and economically feasible to do significant application. VR really works. That is not to say that all the technological problems and limitations have been solved. VR technology today "barely works." Nevertheless, coming over the mountain pass from "almost works" to "barely works" is a major transition for the discipline. I have sought out applications that are now in daily productive use, in order to find out exactly what is real. Separating these from prototype systems and feasibility demos is not always easy. People doing daily production applications have been forthcoming about lessons learned and surprises encountered. As one would expect, the initial production applications are those offering high value over alternate approaches. These applications fall into a few classes. I estimate that there are about a hundred installations in daily productive use worldwide.
series	journal paper
email
last changed	2003/04/23 15:14

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss9432
id	ddss9432
authors	Goldschmidt, G.
year	1994
title	Visual Reference for Design: Analogy, Transformation and the Act of Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	All designers know that it is impossible to infer a design solution from the givens of a task alone, no matter how complete and well presented they are. Therefore, designers seek to complementinformation they receive, and the material they bring into the task environment includes visual images. Images may be gathered from every imaginable source, from domain-specific images (in architecture they are usually classified and pertain to building type, location, period, technology, style or creator) through 'metaphoric' images (art, nature) to eclectic personal favourites. Inaddition, randomly encountered images may find their way into a database of references: a depository of potentially useful images. With the exception of factual information that fills in thetask givens, it is usually far from clear what purpose may be served by images in general, or to what use the specific images aligned for a particular task may be put. We propose that the singlemost significant 'on line' role of visual references during the process of designing is to suggest potential analogies to the entity that is being designed. The process of discovering and exploitingan analogy in design is complex; we shall explain it in terms of Gentner's structure mapping theory, which we adapt to visual structures. We further propose that the abstraction process thatmust take place for the successful identification and mapping from source (visual reference) onto target (designed entity) requires transformations of images, and such transformations are bestachieved through sketching. Sketching facilitates the two way process of movement from the pictorial to the diagrammatic and from the schematic to the figural. Such transformations musttake place to arrive at the match that allows conceptual transfer, mapping of structural relations and insight through analogy.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ga0231
id	ga0231
authors	Sparacino, Flavia
year	2002
title	Narrative Spaces: bridging architecture and entertainment via interactive technology
source	International Conference on Generative Art
summary	Our society’s modalities of communication are rapidly changing. Large panel displays and screens are be ing installed in many public spaces, ranging from open plazas, to shopping malls, to private houses, to theater stages, classrooms, and museums. In parallel, wearable computers are transforming our technological landscape by reshaping the heavy, bulkydesktop computer into a lightweight, portable device that is accessible to people at any time. Computation and sensing are moving from computers and devices into the environment itself. The space around us is instrumented with sensors and displays, and it tends to reflect adiffused need to combine together the information space with our physical space. This combination of large public and miniature personal digital displays together with distributed computing and sensing intelligence offers unprecedented opportunities to merge the virtual and the real, the information landscape of the Internet with the urban landscape of the city, to transform digital animated media in storytellers, in public installations and through personal wearable technology. This paper describes technological platforms built at the MIT Media Lab, through 1994-2002, that contribute to defining new trends in architecture that mergevirtual and real spaces, and are reshaping the way we live and experience the museum, the house, the theater, and the modern city.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ascaad2006_paper11
id	ascaad2006_paper11
authors	Stanton, Michael
year	2006
title	Redemptive Technologies II: the sequel (A Decade Later)
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Nearly ten years ago I published an article in the Dutch journal ARCHIS called "Redemptive Technologies." It derived from comments I made during a conference held in New Orleans in 1994. At that point the machine aesthetic associated with the "new technologies" generated by the computer had not established a precise formal vocabulary but were generating great excitement among the architectural avant-garde. It addressed the limits of the imagery and data produced by this machine and the simple but very political problem of cost and obsolescence. Now the millennium is well past and the somewhat apostolic fervor that accompanied the interaction of a very expensive consumer device with architecture has cooled. Discussion has generally moved from the titillating possibilities opened up by the device, many of which have so far not come to pass, to the sorts of hard and software available. An architectural language closely associated with the imagistic potential of new programs, biomorphism, has now come and gone on the runways of architectural taste. And yet, in recent articles rejecting the direct political effect of architectural work, the potential of new programs and virtual environments are proposed as alternative directions that our perpetually troubled profession may pursue. This paper will assess the last decade regarding the critical climate that surrounds cyber/technology. In the economic context of architectural education in which computers are still a central issue, the political issues that evolve will form a backdrop to any discussion. Furthermore, the problem of the "new" language of biomorphism will be reiterated as an architectural grammar with a 100-year history - from Catalan Modernismo and Art Nouveau, through Hermann Finsterlin and Eric Mendelsohn's projects of the 1920s, to Giovanni Michelucci and Italian work of the post-war, to Frederick Kiesler's Endless House of the late '50s, continuing through moments of Deconstructivism and Architectural Association salients, etc. These forms continue to be semantically simplistic and hard to make. Really the difference is the neo-avant-garde imagery and rhetoric involved in their continuing resurrection. Computer images, but also the ubiquitous machine itself, are omnipresent and often their value is assumed without question or proposed as a remedy for issues they cannot possibly address. This paper will underline the problem of the computer, of screens and the insistent imagistic formulas encourage by their use, and the ennui that is beginning to pervade the discipline after initial uncritical enthusiasm for this very powerful and expensive medium. But it will also propose other very valuable directions, those relating to reassessing the processes rather than the images that architecture engages, that this now aging "new" technology can much more resolutely and successfully address.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss9401
id	ddss9401
authors	Akin, Omer
year	1994
title	Psychology of Early Design in Architecture
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Lately there has been a good deal of emphasis on the early stages of the design process, particularly by developers of computer aids and quantitative design models for both evaluation and generation of designs in a variety of domains. Yet, there is little understanding of the early design-process. While the early design process as manifested by human designers need not be the sole basis of the description of this phase, it certainly represents and important kernel of knowledge, especially for those who are interested in developing models, systems or merely interfaces for such systems. This paper focuses on the characterization of the psychology of the early design phase in architecture. It is described in terms of the general design strategies and problem solving tactics used; and is contrasted against some of the process characteristics that
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	diss_brewster
id	diss_brewster
authors	Brewster, S.A.
year	1994
title	Providing a Structured Method for Integrating Non-Speech Audio into Human-Computer Interfaces
source	Heslington, York: University of York
summary	This thesis provides a framework for integrating non-speech sound into human-computer interfaces. Previously there was no structured way of doing this, it was done in an ad hoc manner by individual designers. This led to ineffective uses of sound. In order to add sounds to improve usability two questions must be answered: What sounds should be used and where is it best to use them? With these answers a structured method for adding sound can be created. An investigation of earcons as a means of presenting information in sound was undertaken. A series of detailed experiments showed that earcons were effective, especially if musical timbres were used. Parallel earcons were also investigated (where two earcons are played simultaneously) and an experiment showed that they could increase sound presentation rates. From these results guidelines were drawn up for designers to use when creating usable earcons. These formed the first half of the structured method for integrating sound into interfaces. An informal analysis technique was designed to investigate interactions to identify situations where hidden information existed and where non-speech sound could be used to overcome the associated problems. Interactions were considered in terms of events, status and modes to find hidden information. This information was then categorised in terms of the feedback needed to present it. Several examples of the use of the technique were presented. This technique formed the second half of the structured method. The structured method was evaluated by testing sonically-enhanced scrollbars, buttons and windows. Experimental results showed that sound could improve usability by increasing performance, reducing time to recover from errors and reducing workload. There was also no increased annoyance due to the sound. Thus the structured method for integrating sound into interfaces was shown to be effective when applied to existing interface widgets.
series	thesis:PhD
email
more	http://www.dcs.gla.ac.uk/~stephen/publications.shtml
last changed	2003/11/28 07:34

_id	ddss9415
id	ddss9415
authors	Cajati, Claudio
year	1994
title	Innovative Expert Systems With Hypertextual User Interfaces: A Special Support for the Building Recovering Project
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper, first of all a short account on the peculiarity of knowledge in the domain of Architectural and Building Project, particularly in the Building Recovering Project is given. Thatmeans to focus the concept of "degree of authority" of different types of knowledge with regard to project: regulations; specialist literature having in practice the value of self-regulation; technical updating; exemplary design cases; warnings; analysis methods; heuristics; orientating references. Consequently, the different roles of two basic design & decision support systems, that is expert systems and hypertexts, are considered. The former seem to be quite fit for representing information and knowledge linked to a clear "authority", the one of experts in a certain domain; the latter seem to be quite fit for illustrating the interdisciplinary complexity, different historicinterpretations, various analogous references, and so on. Afterwards, the limits of expert systems based on the logic "true-false" are underlined, and the perspective of expert systems based on more sophisticated and appropriate rules and metarules is proposed. At last, the possible structure of such an innovative expert system, with a hypertextual interface, in the domain of Building Recovering Project is exemplified.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9429
id	ddss9429
authors	Geerling, Heinrich
year	1994
title	A Proposal for a Framework for Business Re-engineering in Design and Realization of Artificial Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	According to the Top-Down design process', this paper gives a generic and qualitative description of a Concurrent Engineering Environment, that should support the problem solving procedure in town planning and architecture in a modern quality oriented society. A system that is based on the principal of democracy might guarantee the preservation of quality in the projection and realization of artificial environments. This environment can be seen as a part of the today often discussed "digital democracy", which practically is based on a infrastructure of computers, interfaces, software systems, a network, databases and a data presentation, that is able to comprise the expectations of professionals involved in the architecture and town planning process. The paper will discuss what the role of the designer and coordinator of this computer environment looks like,in order to design, plan, build and coordinate activities for the realization of this Concurrent Environment and how several software engineers work concurrently to develop tools that guarantee a modular integration. The backbone of this environment is the definition and use of standards for data exchange. Basically those standards are derived from two domains: artifacts will be described in a product model data, while natural resources are described in spatial data. Town planning has to integrate both models. It will be discussed briefly how far the data modelling language EXPRESS of part 11 of the ISO 10303 (Express Language Reference Manual) might be useful to model GIS related problems. An example will describe how a scenario of activities, from registration of real world data to recognition of requirements of society, the definition of development plans through design(competition), lawfulness checking and construction until demolition should look like.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9445
id	ddss9445
authors	Hillier, B., Penn, A., Dalton, N., Chapman, D. and Redfern, F.
year	1994
title	Graphical Knowledge Interfaces: The Extensive and Intensive Useof Precedent Data Bases in Architecture and Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Space syntax' is a family of techniques for the analysis of architectural and urban space which can be used both in research and design mode. This means, for example, that a redevelopment area in an urban context can be researched using space syntax models which can then be turned round and used as the basis for design idea of a 'graphical knowledge interface' (GM) is a further development of this in feeding research into design. It starts from the important role that the analysis and comparison of 'precedents', that is, cases with some similarity of the design problem in hand, often play in design. In a GM, 'precedents' which have already been researched using the space syntax methodology and which are relevant to a particular design problem - say a set of urban areas or a set of housing estates - can be brought into the modelling technique, so that the designer has on hand not simply a space syntax model of the problem in hand but an intelligent 'precedent' in the form of graphical and statistical representations which can be manipulated and interrogated during the design process, in much the same way as discussion of precedent are currently brought into design but with much more complex data and much more powerful theoretical tools. GM can be used as intensive mode, in which many different kinds of data - say on land uses, rents, or crime rates - are added to the model of an area, or in extensive mode where the emphasis is on comparing, say, the structures of a large number of urban areas. The GM will be illustrated through a worked example of a recent major urban design project in which the team has participated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	d5b3
authors	Knight, Michael and Brown, Andre
year	1999
title	Working in Virtual Environments through appropriate Physical Interfaces
doi	https://doi.org/10.52842/conf.ecaade.1999.431
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 431-436
summary	The work described here is aimed at contributing towards the debate and development relating to the construction of interfaces to explore buildings and their environs through virtual worlds. We describe a particular hardware and software configuration which is derived by the use of low cost games software to create the Virtual Environment. The Physical Interface responds to the work of other researchers, in this area, in particular Shaw (1994) and Vasquez de Velasco & Trigo (1997). Virtual Evironments might have the potential to be "a magical window into other worlds, from molecules to minds" (Rheingold, 1992), but what is the nature of that window? Currently it is often a translucent opening which gives a hazy and distorted (disembodied) view. And many versions of such openings are relatively expensive. We consider ways towards clearing the haze without too much expense, adapting techniques proposed by developers of low cost virtual reality systems (Hollands, 1995) for use in an architectural setting.
keywords	Virtual Environments, Games Software
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ddss9459
id	ddss9459
authors	Langelaan, Willem
year	1994
title	Sequential and Concurrent Cad Layering
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Most CAD software allows graphical and text objects to be grouped into layers. There are two fundamentally different methods for layering: sequential layering and concurrent layering. With sequential layering, layers are attributes of the CAD database and objects are attributes of a layer. With concurrent layering, objects are attributes of the CAD database and a layer is an attribute of an object. Sequential layering emulates the pinbar drafting technique. As a result, it is output oriented. Only one layer at a time can be edited. Concurrent layering is uniquely a computer based layering method which has no manual equivalent. User specified sets of layers can be edited concurrently. It makes it possible to organize the infrastructure of the CAD database which equally facilitates input, i.e. editing design information, and output, i.e. presenting construction information on paper. Specification levels are related to design levels and to construction phases. Specification levels can serve as interfaces between input and output. In particular, a concurrently layered CAD database can be structured in layers which conform to specification levels. Furthermore, the layers can be subdivided by sub-system such as construction discipline, and by partial-system such as room finish schedules. It is demonstrated how a concurrently layered environment for computer aided design can be developed which permits deductive and inductive design activities. The appendix provides a detailed example of a concurrently layered CAD file with a default input and output environment of layers and layer groups. The environment was developed to coordinate the design and production activities of an architectural practice. The connections between layers and layer groups are illustrated in a 22 x 32 matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	ad0e
authors	Mullet, Kevin E. and Sano, Darrell K.
year	1994
title	Applying Visual Design: Trade Secrets for Elegant Interfaces TUTORIALS
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 353-354
summary	This tutorial describes a number of fundamental techniques applied routinely in communication-oriented visual design. The orientation, process, training, and culture of the visual design disciplines (graphic design, industrial design, interior design, architecture) are essential components of effective interface design. Unfortunately, few software developers or human factors engineers receive any training in these disciplines. This tutorial describes important design rules and techniques internalized by every visual designer through coursework and studio experience. While mastery will indeed require extended practice, the techniques we describe are not difficult to understand and can be immediately applied to real-world problems. We draw our background, training, and influence from the rational, functional, information oriented perspective of the Modernist design ethic. Because all graphical user interfaces are communication systems, we believe their design should reflect these same values. Our tutorial is organized not along the traditional subdisciplines of color, typography, or ideation, but along the problems of graphical interface design as experienced in commercial software development. We describe basic design principles (the what and why), common errors, and practical techniques (the how) for each of the six major areas outlined below. (1) Elegance and Simplicity (2) Scale, Contrast and Proportion (3) Organization and Visual Structure (4) Module and Programme (5) Image and Representation (6) So What About Style?
series	other
last changed	2002/07/07 16:01

_id	952f
authors	Soloway, E., Guzdial, M. and Hay, K.
year	1994
title	Learner-Centered Design: The Challenge for HCI in the 21st Century
source	Interactions , no. April (1994): 36-48
summary	In the 1980's a major transformation took place in the computing world: attention was finally being paid to making computers easier-to-use. You know the history: in the 1970's folks at Xerox were exploring so-called personal computers and developing graphical, point-and-click interfaces. The goal was to make using computers less cognitively taxing, there- by permitting the user to focus more mental cycles on getting the job done. For some time people had recognized that there would be benefits if users could interact with computers using visual cues and motor movements instead of testu- al/linguistic strings. However, computer cycles were costly; they could hardly be wasted on supporting a non-textual interface. There was barely enough zorch (i.e., computer power, measured in your favorite unit) to simply calculate the payroll.
series	journal paper
last changed	2003/04/23 15:50

For more results click below: