Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 360

Reformat results as: short short into frame detailed detailed into frame

_id	cc19
authors	Glennie, William L.
year	1994
title	Europe '94 - A Visitor's Report on the State of CAAD in Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 262
doi	https://doi.org/10.52842/conf.ecaade.1994.x.s5h
summary	During May, June and July of this year, I had the pleasure of visiting twelve institutions across Europe where computers are being used in the teaching of Architecture. There are as many different approaches to the incorporation of computers in the curriculum as there are places, and they all have some degree of success. My greatest surprise was the large size of these Schools, even in relatively small countries. Dealing with a huge number of students makes any kind of mandatory computer instruction almost impossible. In spite of all difficulties, enthusiasm and willingness to work directly with students was the single most important characteristic in the faculty and staff who are having the greatest success. Support staff dedicated to the maintenance of equipment and software were provided at most of the institutions. For those who do not have this benefit it is critical to relieve the teaching and research faculty of the need for these time-consuming tasks. Formal research activities are not essential to effective education. The process of setting up such efforts is again a distraction from the more important job of teaching. If research projects grow naturally out of the curriculum, they may be pursued without impeding instruction. Most serious of all, there is a substantial lack of communication and cooperation among these schools, and by implication, among all of the other schools in Europe. The mechanism of annual conferences held by ECAADE is insufficient to exchange information and interests. There were several occasions when I mentioned work that was being carried out at one place that would match very nicely with efforts at another. However, it is clearly impossible for any one school to spearhead this kind of collection and coordination of activities. The only appropriate organisation for this kind of exchange would be a centralised service initiated and maintained by the European Community. It is very important that such a body does not attempt to limit or direct the work of individual schools, rather simply serves as a clearinghouse through which the various groups can benefit from each other's work, to the mutual benefit of all.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
doi	https://doi.org/10.52842/conf.caadria.2004.005
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	61a4
authors	Parsons, Peter W.
year	1994
title	Craft and Geometry in Architecture: An Experimental Design Studio Using the Computer
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 171-176
doi	https://doi.org/10.52842/conf.acadia.1994.171
summary	Craft is one of the main aspects of architecture that accounts for its strong corporeal presence. The Computer used as a geometry machine lacks such tectonics. The predominant means for bringing a sense of materiality to its geometric constructions is through rendering, and in this respect the computer is not significantly different from geometric drawing. One need only recall the beautifully rendered drawings of the Beaux-Arts for a comparison. With the rise of modern architecture such 'paper' architecture was voraciously denounced in the cause of relating architectural production more closely with crafted production. Even now the interest in craft has persisted despite postmodern criticism. Therefore, a means for bringing a greater sense of craft to computer-aided design seems desirable. The architectural studio discussed in this paper was initiated partly for this purpose by intentionally confronting the computer's proclivity to move its users away from craft toward geometry, while at the same time taking advantage of its capabilities as a geometry machine. Craft can best be understood by practicing it. Consider, for example, the use of a chisel in woodwork. As one applies force with it, one can feel the resistance of the material. Carving with the grain feels differently than carving against or across it. Carving a piece of maple feels differently than carving a piece of pine. If one presses too hard on the chisel or does not hold it at the precise angle, there is a great risk of creating an unwanted gouge. Gradually with practice the tool feels as if it is an extension of the hand that holds it. it becomes an extension of the body. One can feel the physical qualities of the wood through it. Like a limb of the body its presence can become transparent and one can learn about what one feels through it. It can imprint a memory in the mind that comes to the brain, not through the eyes alone, but through the tactile senses. On the other hand it is tiring to use a chisel for an extended period of time. One's body begins to ache and, as the body tires, the risks of making an unwanted mistake increase. Furthermore, because a tool becomes wedded to the body, it is almost impossible to use more than one tool at a time unless they are being used in conjunction with one another as one might use two limbs of the body together. On a computer one can never 'feel' an object, the image of which is on the screen, in the same manner that one can feel with a chisel the material upon which one is working. One becomes particularly aware of this when creating a 3D computer model of a hand tool. One wants to hold it, not just look at it. Thus the artifice of the object created by means of the computer becomes very apparent, because the 'tool' has not yet taken on the qualities of a tool, although it has taken on the appearance of one.
series	ACADIA
last changed	2022/06/07 07:59

_id	627a
authors	Eddison, Tony
year	1994
title	An Investigation of the Concept of Designer Style and its Relevance to The Design of CAD Systems
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 213
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t0t
summary	Underlying the notion of style is the basic premise that all designers are not the same and that the manner in which any designer works through a design problem towards a proposed solution may be qualitatively different from other designers. If, through this work, this is shown to be the case and the concept of designer style can be meaningfully discussed then any model of the design process and any system or product relating to this model must allow for such variations at the level of the group or individual. This is the starting point of this investigation of the concept of designer styles.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9447
id	ddss9447
authors	Jabi, Wassim
year	1994
title	An Outline of the Requirements for a Computer Supported Collaborative Design System
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of specific rules and grammars. Yet, there is a general consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still cannot support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. Thus, if CAAD is to ultimately benefit the design process, it must (1) emulate and support the design team approach to architectural problem solving and (2) be deployed in the earliest possible stages of the design process. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the interaction between a set of requirements (the building program) and the architectural solution that satisfies them (the schematic design). The core of this interaction forms the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modelling (based on the NIAM notation), object-oriented algorithms, and distributed agents. Based on a literature survey and earlier findings on the role of artifacts in collaborative design, this paper outlines the requirements for the above system and reports on initial experiments. Thus, it constitutes the first stage of a research project that will lead to a full implementation of a distributed collaborative computer environment addressing the above issues.
series	DDSS
type	normal paper
email
last changed	2008/06/12 16:32

_id	cd34
authors	Marinelli, A.M., Belibani, R. and Gadola, A.
year	1994
title	Multimedia in Communication: A Study on the Urban Image of Barcelona
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 103-107
doi	https://doi.org/10.52842/conf.ecaade.1994.103
summary	The Hypertext on Barcelona was realized within the interuniversity scientific research "La Produzione dei circuiti multimediali didattici per l'architettura e l'urbanistica" (The production of multimedia didactic circuits for architecture and urban planning), coordinator Prof. Paola Coppola Pignatelli - Dipartimento di Progettazione Architettonica e Urbana- Facoltà di Architettura, Università "La Sapienza", Roma, Italia. During the numerous debates on the relationship between multimedia and communication of the project a long list of problems emerged: the understanding and the management of explorable fields opened by these new media; the informative overflow that can introduce irrelevant information; the "interactive" anxiousness that produces a continuous jumping from one theme to another without any understanding; the identification of the right contents of a multimedia product, that requires an elaborate culture of media languages; the education of the users on new models of learning. From the debates emerged in short a principal point: the necessity to study and to experiment a "multimedia tool" able of transmitting knowledge not through a simple sum of data but through a group of information. If every single tool has -its own characteristics and if the combinations are not automatic, then the modes and contents should be examined. Is it possible therefore to invent a strategy of communication?
series	eCAADe
last changed	2022/06/07 07:59

_id	0465
authors	Szövényi-Lux, Miklós
year	1994
title	Virtual Future!?
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 215
doi	https://doi.org/10.52842/conf.ecaade.1994.x.o0h
summary	Architecture was born long, long ago with the help of those people who first realised that they are not only building houses but, what is more important, thrilling and has been the focus of many debates, creating space. In the beginning man created space by adding and combining different volumes of masses. They thought that space can be perceived as determined by different points of orientation placed around us. Later people started to realise that perception of space is a little bit more sophisticated. Perhaps everybody has smiled at a baby who standing up for the first time in his life in his playpen, extending his hands towards objects on the nearby table physically unreachable for him. If he was an adult, people would think perhaps something is wrong with him, when he extends his hands towards things we surely know are impossible to reach from his actual position. So how come we can judge with exactitude the place of different objects in space? Maybe by the time needed for the movement to get there. Let us not forget that the baby's first real movement is when he starts to walk and then he starts to get the feeling of this three dimensional world, around which can be only realised simultaneously in space and time. Anyone can say that this is an interesting theory, but who cares? It is said that most of the architects, who are real designers have a keen sense of creating and perceiving space. They are far more interested in the perfection of the created space with all its details than anything else. And here is where a CAD program can come into the picture. Talking about a real CAD program that means from the point of view of a designer, a silent friend who never cheats or boasts, who takes him in SPACE wherever he wants to go and shows him his CREATION as an extending arm between his imagination and the reality.
series	eCAADe
last changed	2022/06/07 07:50

_id	2647
authors	Koutamanis, Alexander
year	1994
title	Sun and Time in the Built Environment
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 248
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f4j
summary	At a time when requirements on the quality of the built environment are increasingly becoming explicit and specific, computer technology promises the ability to analyse and evaluate buildings during the design process. The computer can extract the necessary information from conventional geometric representations, generate comprehensive descriptions of the aspects to be analysed and use these to arrive at precise and accurate results that can be represented visually. Visual representations facilitate comprehension of the analyses and of their results because of their agreement with our predominantly visual perception of the built environment. The consequent close correspondences between geometric design representations and the visual representation of analyses and evaluations allow direct correlation of the results with the design as a whole. Such correlation is instrumental for imposing explicit and justifiable constraints on the further development of a design. One good example of visual analyses is daylighting. In many drafting and modelling programs a viewing point can be set on the basis the sun’s height and azimuth. The projection returned reveals the surfaces that are directly lit by the sun. In other programs the sun’s height and azimuth can be used to position a light source with parallel rays. This source gives rise to shading and shadows that correspond to the ones produced by the sun. In addition, several programs can calculate the position of the sun and hence the viewing point or the light source on the basis of the date, the time and the geographic coordinates of the place. The availability of computer-aided daylighting analysis has obvious advantages for practice. Efficiency and reliability of the analysis increase, while flexibility is superior to analog simulations. Unfortunately automation of daylighting analysis may also impede understanding of underlying principles, that is, of the issues at the focus of architectural education. Explaining how the analysis is performed and why becomes thus a necessity for computer-aided design education. Exercises that aim at more than just learning and using a computer program can enrich the student’s understanding of the analysis and its results. The efficiency and flexibility of the computer facilitate the study of aspects such as the comparison of local apparent time, local mean time, standard time and daylight saving time and their significance for daylighting, solar heating and cooling patterns and possibilities. Sundials with their explicit correspondence to solar movement can be instrumental in this respect. The efficiency and flexibility of the computer also support the investigation of the techniques by which the daylighting analysis is performed and explain the relationships between projective theory, sciagraphy and computer graphics. A better understanding of the principles and techniques for daylighting analysis has a generally positive influence on the students’ learning of the daylighting analysis software and more significantly on their correlation of daylighting constraints with their designs. This leads in turn to increased flexibility and adaptability of the designs with respect to daylighting and to a conscious and meaningful exploration of variations and alternative solutions.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6f6a
authors	Lyons, Arthur and Doidge, Charles
year	1994
title	The Animation of Dynamic Architecture
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 233
doi	https://doi.org/10.52842/conf.ecaade.1994.x.q6a
summary	The most valuable resource in education is student time and the greatest asset is the ingenuity of student minds. CAD technology now offers enormous potential to education, but limitations in time and funding, prevent its use to the extent possible within practice. Therefore, after dealing with 'awareness', 'attitude' and 'limited applications', our most important role in education is to encourage innovation. The third year of the honours option course at De Montfort University takes this as its theme and challenges students to explore and exploit innovative applications. One particular area of development has been exploring the dynamic aspects of architectural design which go much further than the well-established 'fly-through' sequences. A great deal of architectural design and design development depends upon dynamic issues which range from movement joints to construction sequence. A visual understanding of these dynamic issues drawn from appropriate computer animations can now be an effective factor in design.
series	eCAADe
last changed	2022/06/07 07:50

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	8822
authors	Jakimowicz, Adam
year	1994
title	Abstract Modelling - Forming and Exploring
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 214
doi	https://doi.org/10.52842/conf.ecaade.1994.x.o5l
summary	Architectural design is always concerned with form to things. It is the sphere or action where meanings are to be expressed and further on - received (by a receiver), felt, understood. "Meanings" mean not only rational information. The matter is to reach the essence and to master ways appropriate to expose and interprete it. Quality of the form decides whether architectural or any work is worth attention or not and to what degree. Form is an attribute of a thing. It is form that "speaks". This linguistic metaphore shows one of natural, inborn features of things and states. However, questions appear: 1. Does everything have form? 2. Is the form an objective term? 3. What limitations of the definition of the form to accept- if any? The friendly environment for creating form consists of conscious intentions plus open mind. Rules are certain, but liquid. Every formal communication system may be widened individually. The only limitation is to be received according to intentions. So, incredibly, the infinite number of combinations, even within one system, may be possible.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	9377
authors	Nowacki, Aleksander
year	1995
title	Gothic Cathedral in the Virtual Reality
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 43-56
summary	Everyone who once visited Beauvais, small town placed 100 km from Paris, certainly asked himself: "how would have this highest gothic cathedral, that was started here, looked like if it had been completed?". I attempted to answer this question in my diploma work in 1994. However, the task wouldn't be done without power of contemporary computers. They made it possible to create the entire three-dimensional model of this magnificent building in the virtual reality. Cathedral Saint-Pierre in Beauvais, which was started in 1225, partly collapsed in 1284 and 1573. Finally, in 1600, when only choir and transept were finished, the works had been interrupted. The height of this highest gothic interior in the world is 48.5m. To my disposition I had the drawings of plan and cross- section of the existing part of the building, photographic specification and detailed description of the construction of the cathedral. I used PC 486DX/33, 16 MB RAM, HD 170 MB and software: Autodesk AutoCAD r.12 and AccuRender r.1.10. The work was divided into three stages. The first one was "building" the model of existing part of the cathedral in the threedimensional CAD-space. The next one was trying "to finish" the temple based on theoretical reflections and comparative analyses of existing French gothic cathedrals. The last stage included the performance of the series of pseudorealistic pictures showing the "finished" cathedral in Beauvais from the outside, inside and with illumination by night.
series	plCAD
last changed	2000/01/24 10:08

_id	ddss9505
id	ddss9505
authors	Wyatt, Ray
year	1994
title	Strategic Decision Support: Using Neural Networks to Enhance and Explore Human Strategizing
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper focuses on a mechanism by which planners and designers are thought to reduce complexity. The mechanism involves choosing a potentially profitable direction of search, or choosing potentially profitable set of aims to pursue, within which a detailed solution might be found, and rejecting all potentially unprofitable directions of search. The literature of psychology, planning and operations research is drawn upon to argue that designers base such initial choice of direction on their candidate aims' relative scores for eight key parameters: probability, returns for effort, delay, robustness, difficulty, present satisfaction and dependence. The paper then describes a piece of decision support software which, by eliciting any user's scores for their candidate aims on the eight key parameters, is able to order such aims into a strategic plan. Such software also incorporates a simulated neural network which attempts to "learn", from users' recorded responses to the software-suggested strategies, how users actually weight the relative importances of the eight key parameters. That is, it is hoped that the neural network will "converge' to some prototypical pattern(s) of weightings. Having such a tool would certainly constitute an advance in the state of the art of computer-aided strategy development. Alternatively, if the network never converges, the use of neural networks in computer-aided planning is perhaps not advisable. Accordingly, a test was conducted in which a group of planners used the software to address a typical spatial problem. The results, in terms of whether or not the neural network converged, will be reported.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ca51
authors	Asanowicz, Aleksander
year	1994
title	CAFE: Composition for Architects - Forms and Emotions
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 249
doi	https://doi.org/10.52842/conf.ecaade.1994.x.l3s
summary	In the architectural creation process there has always been an inclination to improve the methods of designing in the way of ,,objectivization" of designing process. Objectivization which would explain why we do design in this way and not the other. In spite of the trend to the total objectivization (Vitruvius, Alberti, Palladio), the results appeared to be still subjective, i.e. they included methods of designing typical of the one and only architect. This fact made them completely useless in the designing practice. On the other hand one cannot underestimate their meaning as to this very practice. Because it is just thanks to them that the development of designing studies has taken place. We do learn not only watching works of great architects, but also studying their opinions concerning problems of form, function and construction. That is why it seems to be useful to collect experiences concerning the classic theory of architectural composition, which have been gathered through centuries, as well as to try once again to objectivize the process. Composition information arranged in the form of data-base would create the ground for proper functioning of an expert system uniting diagnostic and planning functions. Study of that kind, not claiming design applications could be an excellent educational equipment in teaching architectural composition. In the proposed teaching system attempts have been made to look at the architectural composition theory in the light of the perception of the form, and - emerging in this process - emotional and aesthetic evaluations. In order to define which evaluations have been most often expressed during the perception process of architectural forms, the students of Architecture Faculty in Bialystok Technical University have been polled on the subject: ,,Which words are most commonly used in the descriptions of architecture works?"
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss9413
id	ddss9413
authors	Branki, Cherif
year	1994
title	Communicative Acts in Cooperative Architectural Design Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a scheme, that can be used to support the communication process in cooperative design. Computational aids for design have largely been for a designerworking by himself/herself. These aids have also been supplemented by the widespread use of artificial intelligence approaches. However, design is so complex, and very rarely acted upon by a single designer but many more working towards the same aim. This involves a new paradigm in which designers need to cooperate with each other using a computational medium. A protocol analysis in cooperative design has been carried out and technological support has been proposed.Cooperative design becomes an important paradigm for the next generation of intelligent computer aided design systems. It will be conducted in many forms among several designers and willrequire the support of advanced communication facilities beyond the "passive" transmission of data and messages. Technological advances in communication networks have opened up new ways for cooperative design interaction across several processes of cooperation among designers, designers and computer aided design systems, computer aided design systems and knowledge based systems, and knowledge based systems themselves. In cooperative design environments, aunit of communication among designers is the transfer of a message from one designer (a sender) to another (a receiver). The aim of such communication is to provide the receiver with some information or to have the receiver take certain actions. Inspired by the speech act theory, a branch of the philosophy of language and linguistics, such a unit is called a communicative act. By analogy to architectural design, a communicative act is a performing act in designers communication.
series	DDSS
email
last changed	2003/08/07 16:36

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	27b5
authors	Dießenbacher, Claus and Rank, Ernst
year	1995
title	A Multimedia Archaeological Museum
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 13-20
doi	https://doi.org/10.52842/conf.ecaade.1995.013
summary	This paper will present a project, which was first initiated in 1994 as a graduate students seminar and is now being continued as a research project in a cooperation of computer scientists, architects and archaeologists. An ancient roman city (Colonia Ulpia Traiana near todays Xanten in Germany) has been reconstructed, using various levels of abstraction. On the coarsest level, a 3D-model of the whole city was established, distinguishing between different historical periods of the city. The second level picks places of special interest (temples, the forum, the amphitheater, the townbaths etc.) and reconstructs these buildings or groups of buildings. On the finest level important interior parts or functional details like the Hypocaustae in the town-baths are modelled. All reconstructions are oriented as close as possible to results from excavations or other available documents. All levels of the 3D-model have been visualized using photorealistic images and sequences of video animations. The 3D model is integrated into a multimedia environment, augmenting the visualization elements with plans of the city and individual buildings and with text documents. It is intended, that parts of the outlined system will be available at the site of the ancient city, where today a large public archaeological park is located.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_2.htm
last changed	2022/06/07 07:55

_id	ddss9428
id	ddss9428
authors	Erturk, Scvinc and Erturk, Zafer
year	1994
title	Historical Background of the Visual Simulation Models in Architectural Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is well known that every sort of visualization model has its own capacity to represent the reality and designers' concepts of space. To the authors' knowledge, there are very few attempts to measure and compare their relative potential power of presentation. Given this lack of academic studies, it would be necessary to give a historical background on the use of visual models. Basically those tools could be divided into two main types : traditional visula techniques such as drawings , scale models and most advance technological tools ranging from basic slidesand films to recentlydeveloped techniquessuch as relatoscope, and computer aided simulation models. This paper covers the historical background of visual models .
series	DDSS
last changed	2003/08/07 16:36

For more results click below: