Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 346

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9413
id	ddss9413
authors	Branki, Cherif
year	1994
title	Communicative Acts in Cooperative Architectural Design Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a scheme, that can be used to support the communication process in cooperative design. Computational aids for design have largely been for a designerworking by himself/herself. These aids have also been supplemented by the widespread use of artificial intelligence approaches. However, design is so complex, and very rarely acted upon by a single designer but many more working towards the same aim. This involves a new paradigm in which designers need to cooperate with each other using a computational medium. A protocol analysis in cooperative design has been carried out and technological support has been proposed.Cooperative design becomes an important paradigm for the next generation of intelligent computer aided design systems. It will be conducted in many forms among several designers and willrequire the support of advanced communication facilities beyond the "passive" transmission of data and messages. Technological advances in communication networks have opened up new ways for cooperative design interaction across several processes of cooperation among designers, designers and computer aided design systems, computer aided design systems and knowledge based systems, and knowledge based systems themselves. In cooperative design environments, aunit of communication among designers is the transfer of a message from one designer (a sender) to another (a receiver). The aim of such communication is to provide the receiver with some information or to have the receiver take certain actions. Inspired by the speech act theory, a branch of the philosophy of language and linguistics, such a unit is called a communicative act. By analogy to architectural design, a communicative act is a performing act in designers communication.
series	DDSS
email
last changed	2003/08/07 16:36

_id	6572
authors	Fioravanti, A., Le Rose, L. and Sgueglia della Marra, C.
year	1994
title	KAAD: A Didactical Experience
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 257
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w3w
summary	Students in the last year of their course in Building Engineering in the "La Sapienza" University of Rome study questions of architectural design of considerable complexity, since they are characterised by a marked degree of multi-disciplinary work. In the preceding years, the students acquire specialist notions in the fields of thermal behaviour of buildings, technological equipment, static security, architectural composition, programming and costs, technical and constructional details, and so on. However, there is a need for integration at design level of the disciplines learned. At the CAAD Laboratory of the Department of Technical Architecture and Town-planning Technique, with the contribution of the National Research Council, a software known as KAAD (Knowledge-based Assistant for Architectural Design) has been devised, with the aim of providing an effective aid to the activity of design.
series	eCAADe
last changed	2022/06/07 07:50

_id	caadria2005_a_2c_d
id	caadria2005_a_2c_d
authors	Ih-Cheng Lai
year	2005
title	Mapmaker: Linking Plays among Ideas, Cases and Links
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 222-227
doi	https://doi.org/10.52842/conf.caadria.2005.222
summary	Idea association involves a dynamic linking process among ideas, cases and the links themselves. Based on the knowledge representation issue-concept-form proposed by Oxman (1994), design ideas, cases and links are elucidated. Furthermore, various and dynamic linking plays are involved in two steps: divergent, in which alternative idea entities are linked, and convergent, in which these idea entities are selected. These linking plays provide a computational mechanism for indexing prior design cases dynamically. Finally, an index prototype for supporting the linking process of idea association, called Mapmaker, is proposed in this paper.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	diss_kuo
id	diss_kuo
authors	Kuo, C.J.
year	1999
title	Unsupervised Dynamic Concurrent Computer-Aided Design Assistant
source	Los Angeles: UCLA
summary	The increasing capability of computer-aided architectural design systems has strengthened the role that the computer plays in the workplace. Due to the complexity of developing new techniques and research, these systems are undertaken mostly by scientists and engineers without significant architectural input (Willey, 1991). The design concept of these systems may be based on a well-defined and well-understood process, which is not yet realized in architectural design (Galle, 1994). The output of such research may not be easily adapted into the design process. Most of the techniques assume a complete understanding of the design space (Gero and Maher, 1987) (Willey, 1991). The description or construction of the design space is always time and space consuming, and the result can never be complete due to the ever-changing nature of architectural design. This research intends to initiate a solution for the above problems. The proposed system is an unsupervised-dynamic-concurrent-computer-aided-design assistant. The “unsupervised” means the learning process is not supervised by the user because it is against the designer's nature to “think-aloud” in the design studio and it also increases the work load. It is dynamic because the size of the knowledge base is constantly changing. Concurrent means that there are multiple procedures active simultaneously. This research focuses on learning the operational knowledge from an individual designer and reapplying it in future designs. A computer system for this experiment is constructed. It is capable of The preliminary result shows a positive feedback from test subjects. The purpose of this research is to suggest a potent computational frame within which future developments may flourish.
series	thesis:PhD
last changed	2003/11/28 07:37

_id	2292
authors	Kühn, Christian and Herzog, Marcus
year	1994
title	On the Role of Hypermedia in Architectural Design Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 115-120
doi	https://doi.org/10.52842/conf.ecaade.1994.115
summary	Teaching architectural design is not primarily concerned with presenting a body of knowledge analytically, but rather with influencing the way students act in a design situation. Previous design cases play an important part in this process, as they provide students with sets of objectives and corresponding solution patterns. Nevertheless, one of the main problems with using precedents in the design studio is that students take them rather as models to be copied than as starting points for their own research. To overcome this problem, the representation of design cases has to be improved. Our thesis is that in architectural design the structure of a case base of design precedents relies to a large extent on the various, and often conflicting, interpretations of precedents that are provided by architectural theory and discourse. Within a theory of design where exploration is the dominant strategy, we propose a method of using design cases and design theories in an integrated way. Through the use of hypermedia as a medium for representation of design cases, the process of looking for information can be based on the same metaphor as the design process itself.
series	eCAADe
last changed	2022/06/07 07:52

_id	c804
authors	Richens, P.
year	1994
title	Does Knowledge really Help?
source	G. Carrara and Y.E. Kalay (Eds.), Knowledge-Based Computer-Aided Architectural Design, Elsevier
summary	The Martin Centre CADLAB has recently been established to investigate software techniques that could be of practical importance to architects within the next five years. In common with most CAD researchers, we are interested in the earlier, conceptual, stages of design, where commercial CAD systems have had little impact. Our approach is not Knowledge-Based, but rather focuses on using the computer as a medium for design and communication. This leads to a concentration on apparently superficial aspects such as visual appearance, the dynamics of interaction, immediate feedback, plasticity. We try to avoid building-in theoretical attitudes, and to reduce the semantic content of our systems to a low level on the basis that flexibility and intelligence are inversely related; and that flexibility is more important. The CADLAB became operational in January 1992. First year work in three areas – building models, experiencing architecture, and making drawings – is discussed.
series	other
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2003/03/05 13:19

_id	4f13
authors	Ronchi, Alfredo M.
year	1994
title	A Brief History of CAAD in Italy
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 227
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f3n
summary	Twenty years of revolution, from the middle '70 to the middle '90. Many things have changed since the origins of computer graphics and computer aided design in architecture. We started teaching drafting on terminals which connected to mini computers, complex procedures or sets of graphics libraries working with keywords, vectors and storage screens. The next step was devoted to the discovery of workstations in the early '80's, where the user sat face on to the whole power of a multitasking system. At that time to use up to 16 time sharing processes running on the same work station seemed to have no practical use at all. Fortunately someone (ie Xerox PARC laboratories) at the same time started to develop the so-called GUI. Graphical user interface started a revolution in human/machine interface (ie Smalltalk). The desktop metaphor, the use of multiple windows and dialogues joined with icons and pop up menus let the user manage more applications and, even more important, created a standard in application/user interface (CUA). In the meantime focus had moved from hardware to software, systems being chosen from the software running. The true revolution we have seen starting from that base and involving an ever increasing number of users was the birth of PC based applications for CAAD. Generally speaking nowadays there are three main technologies concerning teaching: communication, multimedia and virtual reality. The first is the real base for future revolution. In the recent past we have started to learn how to manage information by computers. Now we can start to communicate and share information all over the world in real time. The new age opened by fax, followed by personal communication systems and networks is the entry point for a real revolution. We can work in the virtual office, meet in virtual space and cooperate in workgroups. ATM and ISDN based teleconferencing will provide a real working tool for many. The ever increasing number of e-mail addresses and network connections is carrying us towards the so called 'global village'. The future merger between personal digital assistant and personal communication will be fascinating. Multi & HyperMedia technology is, like a part of VR, a powerful way to share and transfer information in a structured form. We do not need to put things in a serial form removing links because we can transfer knowledge as is. Another interesting and fundamental aspect typical of VR applications is the capability to change cognitive processes from secondary (symbolic - reconstructive) to primary (perceptive - motory). In this way we can learn by direct experience, by experiment as opposed to reading books. All these things will affect not only ways of working but also ways of studying and teaching. Digital communications, multimedia and VR will help students, multimedia titles will provide different kinds of information directly at home using text, images, video clips and sounds. Obviously all those things will not substitute human relationship as a multimedia title does not compete against a book but it helps.
series	eCAADe
last changed	2022/06/07 07:50

_id	maver_073
id	maver_073
authors	Rutherford, J. and Maver, T.W.
year	1994
title	Knowledge Based Design Support
source	Knowledge Based Computer-Aided Architectural Design (Ed. G Carrara and Y Kalay), Elsevier, 243-268
summary	In 1971 the Architects' Journal featured a paper entitled PACE 1: Computer Aided Building Appraisal. The softwareknown as PACE (Package for Architectural Computer Evaluation), initially developed on the Systemshare time-sharing system accessed on- line from a teletype terminal over the ordinary voice grade telephone network, has, in concept at least, survived the subsequent 22 years and remains to this day a crucial aid in the teaching of architectural design in the University of Strathclyde's Department of Architecture and Building Science.
series	other
type	normal paper
email
last changed	2015/02/20 11:39

_id	maver_074
id	maver_074
authors	Rutherford, J. and Maver, T.W.
year	1994
title	Knowledge Based Design Support
source	Automation in Design, Vol 3, Nos 2-3, 187-202
summary	In 1971 the Architects' Journal featured a paper entitled PACE 1: Computer Aided Building Appraisal. The software known as PACE (Package for Architectural Computer Evaluation), initially developed on the Systemshare time-sharing system accessed on-line from a teletype terminal over the ordinary voice grade telephone network, has, in concept at least, survived the subsequent 22 years and remains to this day a crucial aid in the teaching of architectural design in the University of Strathclyde's Department of Architecture and Building Science.
series	journal paper
email
last changed	2003/09/03 15:03

_id	df9b
authors	Terzidis, Constantinos A.
year	1994
title	Computer-aided extraction of morphological information from architectural drawings
source	University of Michigan
summary	Along with the popularization of Computer-Aided Design (CAD), it has been becoming increasingly necessary and desirable for a computer to recognize engineering drawings and diagrams. Methods exist for inputting and recognizing such engineering drawings and diagrams. This is primarily because they are drawn to conform to specific standards. In contrast, architectural drawings are not prepared in accordance to existing standards. Hence, the problem of reading, recognizing, and extracting morphological information from them automatically remains unsolved. It is this problem that this study focuses on. The research undertaken by this author has three distinct but interrelated objectives. The first objective is to design, implement, and test a computer-based framework which allows its user to extract automatically the geometric and/or architectural structures of a two-dimensional plan. The second objective entails designing, implementing, and testing a computer-based framework which may be employed to compare the geometric and/or architectural structures of individual plans or classes of such plans. The third objective is to integrate the two aforementioned frameworks. Computer vision techniques are used to investigate, analyze, and compare plans of buildings from a morphological standpoint. Such techniques can contribute toward detecting differences or similarities between individual plans. Their ability to search for, combine, and compare morphological information is both parsimonious and effective. Predicated on the assumption that designers derive knowledge from past solutions to form-making problems, this study focuses on the methods by which the morphological information which is contained in building plans can be extracted automatically and entered in a knowledge base. Conceptually, this is part of a larger project which entails investigating how knowledge can be incorporated in a CAD system in a manner which aids and supports the form-making process. Conceivably, the approach of this work is, wholly or partially, applicable to the problem of extracting useful information from graphic representations used in a variety of disciplines (e.g., engineering).
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	8155
authors	Vásquez de Velasco, Guillermo and Angulo, Antonieta
year	1994
title	CAAD-CAAI Integration by Means of High-Impact Small-Scale R&D Projects
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 127-134
doi	https://doi.org/10.52842/conf.ecaade.1994.127
summary	Pointing towards the ultimate goal of instrumental integration between our instructional and professional environments, the paper deals with the articulation of small scale R&D projects that, due to their consistency with main-stream tendencies, can have considerable impact on allowing people, institutions and enterprises to perform a relevant role in our dynamics of "Continuing Professional Development" and "Practice-Based Learning". The paper presents the results of a European Union R&D Project that aims to empower small and medium size enterprises of the building sector with the knowledge needed for the development of multimedia programmes with pedagogical value. The paper is explicit on addressing not only the achievements but also the difficulties that the consortium of European partners had to face, and makes reference to a future spin-off project that follows the same tactical approach.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9428
id	ddss9428
authors	Erturk, Scvinc and Erturk, Zafer
year	1994
title	Historical Background of the Visual Simulation Models in Architectural Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is well known that every sort of visualization model has its own capacity to represent the reality and designers' concepts of space. To the authors' knowledge, there are very few attempts to measure and compare their relative potential power of presentation. Given this lack of academic studies, it would be necessary to give a historical background on the use of visual models. Basically those tools could be divided into two main types : traditional visula techniques such as drawings , scale models and most advance technological tools ranging from basic slidesand films to recentlydeveloped techniquessuch as relatoscope, and computer aided simulation models. This paper covers the historical background of visual models .
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9444
id	ddss9444
authors	Hill, Shauna and Streilein, André
year	1994
title	Architectural Photogrammetry & Knowledge-Base Systems Record & Redevelopment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In redevelopment projects, the purpose of heritage recording is part of an investigative process to achieve understanding about structures so that designers can make the appropriate design decisions. It is desirable to integrate the knowledge of the recording and documentation specialist, who has first-hand knowledge of the building, with the interpretative process of evaluating the building information and making design decisions. New developments in the fields of photogram-metric recording and computer science has led to improved "image understanding". This paper describes research that is the result of exploring the concept of integrating new digital photogram-metric recording processes with an automated expert evaluation tool. The goal of this research is to expedite the acquisition of heritage building information for use by a knowledge-based system capable of providing the designer with building performance evaluations. Photogrammetry records all data as a series of three-dimensional coordinates which make it a natural partner for today's three-dimensional CAD systems. Generating a three-dimensional model of architecturally significant physical forms and details can provide a basis for evaluation, understanding, education, and design. The purpose of knowledge-based systems in construction is to enhance the decision-making process with specialized knowledge and experience. The linkage of CAD databases with knowledge-based systems provides a source of input data, such as a three-dimensional model, significant to a particular problem. This research is a collaborative effort between two groups, the Swiss Federal Institute of Technology in Zurich Switzerland, and the University of Manitoba in Winnipeg, Canada.
series	DDSS
last changed	2003/08/07 16:36

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	6f5d
authors	Koutamanis, A., Bridges A.H. and Van Loon, P.P.
year	1994
title	C-ad hoc Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 39-42
doi	https://doi.org/10.52842/conf.ecaade.1994.039
summary	In the framework of an evolving curriculum we have been developing a series of CAAD exercises aimed at providing the basic knowledge and skills a student needs. The series formed initially a conventional sequence that mapped design stages and corresponded with the gradual development of knowledge and skills. Due to originally practical reasons we are currently relaxing the sequential structure of the CAAD curriculum. This gives us the opportunity to experiment with the integration of the CAAD exercises in the wider design activities of the students, as well as with the structure of the exercises themselves as fully self-contained units.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cd34
authors	Marinelli, A.M., Belibani, R. and Gadola, A.
year	1994
title	Multimedia in Communication: A Study on the Urban Image of Barcelona
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 103-107
doi	https://doi.org/10.52842/conf.ecaade.1994.103
summary	The Hypertext on Barcelona was realized within the interuniversity scientific research "La Produzione dei circuiti multimediali didattici per l'architettura e l'urbanistica" (The production of multimedia didactic circuits for architecture and urban planning), coordinator Prof. Paola Coppola Pignatelli - Dipartimento di Progettazione Architettonica e Urbana- Facoltà di Architettura, Università "La Sapienza", Roma, Italia. During the numerous debates on the relationship between multimedia and communication of the project a long list of problems emerged: the understanding and the management of explorable fields opened by these new media; the informative overflow that can introduce irrelevant information; the "interactive" anxiousness that produces a continuous jumping from one theme to another without any understanding; the identification of the right contents of a multimedia product, that requires an elaborate culture of media languages; the education of the users on new models of learning. From the debates emerged in short a principal point: the necessity to study and to experiment a "multimedia tool" able of transmitting knowledge not through a simple sum of data but through a group of information. If every single tool has -its own characteristics and if the combinations are not automatic, then the modes and contents should be examined. Is it possible therefore to invent a strategy of communication?
series	eCAADe
last changed	2022/06/07 07:59

_id	e533
authors	Oxman, Robert and Mantelers, Jo
year	1994
title	Design Education in the Virtual Studio
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 152-160
doi	https://doi.org/10.52842/conf.ecaade.1994.152
summary	The paper presents an approach to the re-orientation of computational studies in support of the didactic role of the design education program. A definition of computational design studies is proposed which identifies the transfer of explicit design knowledge as one of the functions of this academic field. The concept of design knowledge modeling is introduced as an important component of the knowledge formulation role of computational design studies. A current project is discussed which employs knowledge modeling in a VR system to develop an interactive design environment.
series	eCAADe
last changed	2022/06/07 08:00

For more results click below: