Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 324

Reformat results as: short short into frame detailed detailed into frame

_id	dc0f
authors	Stefik, M.
year	1994
title	Knowledge Systems
source	Morgan Kaufmann Publishers Inc., San Francisco. p. 295
summary	Digital systems cannot act reliably and intelligently in ignorance. They need to know how to act intelligently. Computer systems that use knowledge are called knowledge-based systems, or simply, knowledge systems. Knowledge systems first came to the public's attention in the 1980s as a successful application of artificial intelligence. Since then their use has spread widely throughout industry, finance and science. But what are the principles behind knowledge systems? What are they useful for? How are they built? What are their limitations? How can they connect with human activities for creating and using knowledge? Addressing these questions is the purpose of this book. The art of building knowledge systems is inherently multidisciplinary, incorporating computer science theory, programming practice and psychology. The content of this book incorporates these varied fields covering topics ranging from the design of search algorithms and representations to techniques for acquiring the task specific knowledge required for developing successful systems. It discusses common representations for time, space, uncertainty, and vagueness. It also explains the knowledge-level organizations for the three most widespread knowledge-intensive tasks: classification, configuration, and diagnosis. In a university setting, this book is intended for use at the advanced undergraduate levels and beginning graduate levels. For students outside of computer science, this book provides an introduction that prepares them for using and creating knowledge systems in their own areas of specialization. For computer science students, this book provides a deeper treatment of knowledge systems than is possible in a general introduction to artificial intelligence.
series	other
last changed	2003/04/23 15:14

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9408
id	ddss9408
authors	Bax, Thijs and Trum, Henk
year	1994
title	A Taxonomy of Architecture: Core of a Theory of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The authors developed a taxonomy of concepts in architectural design. It was accepted by the Advisory Committee for education in the field of architecture, a committee advising the European Commission and Member States, as a reference for their task to harmonize architectural education in Europe. The taxonomy is based on Domain theory, a theory developed by the authors, based on General Systems Theory and the notion of structure according to French Structuralism, takes a participatory viewpoint for the integration of knowledge and interests by parties in the architectural design process. The paper discusses recent developments of the taxonomy, firstly as a result of a confrontation with similar endeavours to structure the field of architectural design, secondly as a result of applications of education and architectural design practice, and thirdly as a result of theapplication of some views derived from the philosophical work from Charles Benjamin Peirce. Developments concern the structural form of the taxonomy comprising basic concepts and levelbound scale concepts, and the specification of the content of the fields which these concepts represent. The confrontation with similar endeavours concerns mainly the work of an ARCUK workingparty, chaired by Tom Marcus, based on the European Directive from 1985. The application concerns experiences with a taxonomy-based enquiry in order to represent the profile of educational programmes of schools and faculties of architecture in Europe in qualitative and quantitative terms. This enquiry was carried out in order to achieve a basis for comparison and judgement, and a basis for future guidelines including quantitative aspects. Views of Peirce, more specifically his views on triarchy as a way of ordering and structuring processes of thinking,provide keys for a re-definition of concepts as building stones of the taxonomy in terms of the form-function-process-triad, which strengthens the coherence of the taxonomy, allowing for a more regular representation in the form of a hierarchical ordered matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9411
id	ddss9411
authors	Bouillé, Francois
year	1994
title	Mastering Urban Network Intersection And Superimposition, in an Object-oriented Knowledge System Integrating Rules, Neurons and Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many networks cover the urban texture, either superimposed at a variable distance, or really intersecting, or even in interconnection. We briefly recall the HBDS model, working on persistent abstract data types associated to graphical representations and carrying algorithms expressing conditions to be verified and/or actions to be performed. HBDS is an integrated system too, including database, expert system dealing with fuzzy rules and facts, discrete simulation engine, and neural engine; it has a general purpose programming language. Any urban network is associated to a given prototype, according to the same scheme named prototype with more specific components. These prototypes allow to build the different thematic structures instantiations of the prototypes. All possible cases of arc intersection or "pseudo-intersection" (simple superimposition)or interconnection are obtained by, owing to new prototypes. Moreover, such (pseudo)-intersections are automatically recognized and processed without a human intervention, owing to classes ofconstraints and classes of rules. They deal with particular constraints concerning the location of some urban furniture, and rules concerning the way a cable or a pipe must follow according to thepre-existing other networks in a given area, the minimal distances, minimal or maximal depths, and some required equipments. Urban classes of (pseudo-)intersections inserted in the hyperciass"neuron", inheriting of neural features, may be used for automated learning of urban knowledge; owing to their "behavior", these neurons can communicate and perform actions on other components. Urban classes inserted in the hyperciass "process" may be used for building very large models simulating complex urban phenomenons, thus allowing a better understanding of the real phenomenons. As a conclusion, we emphasize the methodological aspects of object-oriented integration for an efficient processing of the urban context, based on prototyping and mixing rules, neurons and processes.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9415
id	ddss9415
authors	Cajati, Claudio
year	1994
title	Innovative Expert Systems With Hypertextual User Interfaces: A Special Support for the Building Recovering Project
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper, first of all a short account on the peculiarity of knowledge in the domain of Architectural and Building Project, particularly in the Building Recovering Project is given. Thatmeans to focus the concept of "degree of authority" of different types of knowledge with regard to project: regulations; specialist literature having in practice the value of self-regulation; technical updating; exemplary design cases; warnings; analysis methods; heuristics; orientating references. Consequently, the different roles of two basic design & decision support systems, that is expert systems and hypertexts, are considered. The former seem to be quite fit for representing information and knowledge linked to a clear "authority", the one of experts in a certain domain; the latter seem to be quite fit for illustrating the interdisciplinary complexity, different historicinterpretations, various analogous references, and so on. Afterwards, the limits of expert systems based on the logic "true-false" are underlined, and the perspective of expert systems based on more sophisticated and appropriate rules and metarules is proposed. At last, the possible structure of such an innovative expert system, with a hypertextual interface, in the domain of Building Recovering Project is exemplified.
series	DDSS
email
last changed	2003/08/07 16:36

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	4f23
authors	Dieberger, Andreas
year	1994
title	Navigation in Spatial Information Environments: User Interface Design Issues for Hypertext and VR Systems Posters
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994
summary	The Information City project (presented in a poster at Hypertext 93) uses the spatial user interface metaphor of a city to organize and navigate large collections of hypertextual information. As we are used to navigate real life cities the city metaphor -- enriched with magic features -- should help to navigate information structures. A first implementation of the Information City was started in a MUD system. MUDs are networked multi-user text-adventure games which usually make use of a house / city metaphor. MUDs are conceptually similar to hypertext systems and navigational findings in those systems are therefore relevant also to hypertext. While implementing the first parts of the city research into navigation in MUDs was found necessary. This poster presents some results of this navigational study and describes how knowledge in the domains of architecture and city-planning can be used to design an easy to navigate virtual city. Highlights of the results concern magic features and collaboration. Magic features extend the spatial metaphor beyond typical properties of space. An example is the hypertext link which allows tunneling through the spatial structure. Other results concern the richness of spaces (or space-descriptions) and communication between users. It seems the chief benefit of the spatial metaphor of the city is in communication about spatial relationships of information. The findings probably are valuable in designing any information system using spatial metaphors. They are especially useful for hypertext systems realized in some virtual environment -- be it a MUD or an immerse virtual reality system.
series	other
last changed	2002/07/07 16:01

_id	6572
authors	Fioravanti, A., Le Rose, L. and Sgueglia della Marra, C.
year	1994
title	KAAD: A Didactical Experience
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w3w
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 257
summary	Students in the last year of their course in Building Engineering in the "La Sapienza" University of Rome study questions of architectural design of considerable complexity, since they are characterised by a marked degree of multi-disciplinary work. In the preceding years, the students acquire specialist notions in the fields of thermal behaviour of buildings, technological equipment, static security, architectural composition, programming and costs, technical and constructional details, and so on. However, there is a need for integration at design level of the disciplines learned. At the CAAD Laboratory of the Department of Technical Architecture and Town-planning Technique, with the contribution of the National Research Council, a software known as KAAD (Knowledge-based Assistant for Architectural Design) has been devised, with the aim of providing an effective aid to the activity of design.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9431
id	ddss9431
authors	Gilleard, John and Man-kit, Yip
year	1994
title	Development of a Graphic Interface for the Preliminary Design of Air Conditioning Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The paper describes a preliminary design model for air-conditioning systems (ACS). Using a commercially available drafting tool (AutoCAD) and an ACS design program (HevaSketch) the model attempts to develop a comprehensive solution at an early phase of ACS design. Contextual knowledge (in the form of local building codes and equipment) is made available to the designer through a linked database. output from the model is in the the form of 2D and 3D drawings, parts and material schedules and detailed design calculations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9444
id	ddss9444
authors	Hill, Shauna and Streilein, André
year	1994
title	Architectural Photogrammetry & Knowledge-Base Systems Record & Redevelopment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In redevelopment projects, the purpose of heritage recording is part of an investigative process to achieve understanding about structures so that designers can make the appropriate design decisions. It is desirable to integrate the knowledge of the recording and documentation specialist, who has first-hand knowledge of the building, with the interpretative process of evaluating the building information and making design decisions. New developments in the fields of photogram-metric recording and computer science has led to improved "image understanding". This paper describes research that is the result of exploring the concept of integrating new digital photogram-metric recording processes with an automated expert evaluation tool. The goal of this research is to expedite the acquisition of heritage building information for use by a knowledge-based system capable of providing the designer with building performance evaluations. Photogrammetry records all data as a series of three-dimensional coordinates which make it a natural partner for today's three-dimensional CAD systems. Generating a three-dimensional model of architecturally significant physical forms and details can provide a basis for evaluation, understanding, education, and design. The purpose of knowledge-based systems in construction is to enhance the decision-making process with specialized knowledge and experience. The linkage of CAD databases with knowledge-based systems provides a source of input data, such as a three-dimensional model, significant to a particular problem. This research is a collaborative effort between two groups, the Swiss Federal Institute of Technology in Zurich Switzerland, and the University of Manitoba in Winnipeg, Canada.
series	DDSS
last changed	2003/08/07 16:36

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	b9c4
authors	Kim, Inhan
year	1994
title	Data representations in an integrated architectural design environment
source	University of Strathclyde, Dept. of Architecture and Building Science
summary	The architectural design process is very complex and involves cross-disciplinary communication among many related fields. Given the further problems arising from the technological advances in building materials and construction methods, an integrated design environment becomes a central design issue. There have been many attempts to analyse and structure the design process as a uniform hierarchical framework. Most of the attempts resulted in a vague and inappropriate outcome due to the lack of understanding of architectural design complexity and inconsistent design data control sequence. A design problem cannot be comprehensively stated because the design problem has a multi-disciplinary nature and the design problem itself evolves as solutions are attempted by the designer. Therefore, an ideal CAAD system should have the capability to accommodate the multi-disciplinary nature of design and should not prescribe or restrict design concepts and design knowledge. A well designed integrated design environment provides more information and invokes creative imagination for each design stage, and therefore creative decision making by the designer can be achieved. This thesis proposes a prototype architectural design environment, Hybrid Integrated Design Environment [HIDE], which aims to integrate all applications for designing a building. Within the object-oriented design environment, a unified data model and a data management system have been implemented to seamlessly connect all applications. Development of the environment needs to consider the fundamental interaction between each module. Devising a data structure that is appropriate to an effective data communication among the various design stages is essential in a totally integrated CAAD system. The suggested unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. By means of the unified data model, integrated CAAD systems could represent and exchange design information at a semantic level, i.e. the user’s way of thinking, such as exchanging components and features of a building rather than graphical primitives. In consequence, the unified data model reduces the misunderstandings and communication problems among the multiple disciplines of architectural design. The suggested data management system supports the consistent and straight forward mechanisms for controlling the data representation through the inter-connected modules. It is responsible for creating, maintaining, and viewing a consistent database of the design description. It also helps to perform effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. To support inter-disciplinary communication of design concepts and decisions, the integrating of relevant CAAD tools is essential. In the environment, the integration of CAAD tools has been performed on the basis of how well computerized design tools can assist designers to develop better solutions, enabling them to manipulate and appraise varying solutions quickly and with a minimum of effort in an environment conducive to creative design. A well designed user interface system can also benefit the seamless working environment. The proposed user friendly interface system allows a user to explore the environment in a highly interactive manner. From the development of the early data model to the final design, a user could benefit from the prototypes and methods of the user interface system. The ultimate goal of the prototype environment is to suggest a future design environment which helps the architect to have minimum discontinuity in his creativity and make the design process similar to the natural design process with the help of a set of design assistance modules. A prototype version of HIDE has been implemented and a demonstration of the environment is part of this thesis.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cd34
authors	Marinelli, A.M., Belibani, R. and Gadola, A.
year	1994
title	Multimedia in Communication: A Study on the Urban Image of Barcelona
doi	https://doi.org/10.52842/conf.ecaade.1994.103
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 103-107
summary	The Hypertext on Barcelona was realized within the interuniversity scientific research "La Produzione dei circuiti multimediali didattici per l'architettura e l'urbanistica" (The production of multimedia didactic circuits for architecture and urban planning), coordinator Prof. Paola Coppola Pignatelli - Dipartimento di Progettazione Architettonica e Urbana- Facoltà di Architettura, Università "La Sapienza", Roma, Italia. During the numerous debates on the relationship between multimedia and communication of the project a long list of problems emerged: the understanding and the management of explorable fields opened by these new media; the informative overflow that can introduce irrelevant information; the "interactive" anxiousness that produces a continuous jumping from one theme to another without any understanding; the identification of the right contents of a multimedia product, that requires an elaborate culture of media languages; the education of the users on new models of learning. From the debates emerged in short a principal point: the necessity to study and to experiment a "multimedia tool" able of transmitting knowledge not through a simple sum of data but through a group of information. If every single tool has -its own characteristics and if the combinations are not automatic, then the modes and contents should be examined. Is it possible therefore to invent a strategy of communication?
series	eCAADe
last changed	2022/06/07 07:59

_id	a8c0
authors	VoB, A.
year	1994
title	Case-based Reasoning in Building Design: Problems of Case Elicitation and Retrieval
source	The Int. Journal of Construction IT 2(4), pp. 49-62
summary	This article deals with a set of problems that arose in the course of the FABEL project in order to build a system assisting in the design of complex buildings: Task analysis indicated a case-based approach with the subtasks of retrieval, assessment and adaptation of layouts. The idea of first choosing a retrieval method which would then guide the further knowledge elicitation process did not work, because there was no single suitable method. We investigated retrieval methods based on keywords, on vectors, bitmaps, gestalten and on topological structures. As it turned out, each method imposes a particular interpretation on a layout and serves different retrieval purposes. Using multiple methods required an open software architecture providing case management facilities for the various methods. Last not least, the extraction of relevant cases from integrated building models is not trivial at all. Both automatic routines of standard cases and manual extraction of special cases should be available.
series	journal paper
last changed	2003/05/15 21:45

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	42ff
authors	Zarnowiecka, Jadwiga C.
year	1994
title	Data for Creation
doi	https://doi.org/10.52842/conf.ecaade.1994.x.b5u
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 209
summary	The need for regional styles to exist in architecture has been broadly and long discussed. In general, regionalisms are socially accepted and they should be employed. Discussions usually become more intensified together with the search for inspiration to create new styles in architecture. In Poland Stanislaw Witkiewicz, arts critic and theoretitian, a painter and a writer, created and developed “the Zakopane style” on the turn of the 19th century. This is the only one architectural style focussed on the regional features that has been preserved until nowadays. It referred both to architecture and industrial forms. It was received by the contemporaries with ambivalent attitude, from the uncritical enthusiasm to emotional negation. One side claimed that the style affected the national consciousness and united the nation without the State. According to the other side, “the Zakopane style”, when outside the Podhale region, shocked with its non-conformity to the surroundings. About 1910 there was an attempt to create the style not exactly regional but rather national. The designs referred to neoclassic Old Polish mansion house with a porch supported by columns and high mansard roof. Between 1915 and 1918 projects to rebuild the Polish villages and little towns were thrown open to competition. Afterwards, neatly published project catalogues presented universal, all-Polish type of architecture. In 1918, after I World War and after Poland regained independence, whole housing estates were built in manorial style. At the same time the described sets of competition projects were used together with the new ones, prepared by eg. Polish Hygenic Society (1936). All the project proposals show the all-Polish type of regionalism. Another intensification of discussion concerning the regional style is linked with the post-modernist ideas. Modernism-lacking ornament, cosmopolitan, without any homely features (by the way, he is jolly smart who knows what this “homeliness” is all about) despite its undeniable achievements has been finally faced with crushing criticism. Together with this reaction the search for inspiration in regional features of architecture has been revived. But then there has been a lack of Witkiewicz’s enthusiasm and stubbornness. We deal with constant attempts to solve the problem of creation in regional style. The situation described allows for the statement that there are two forms of regionalism: one on a narrow, territorial and second on the all-Polish scale. No doubt, “the Zakopane style” was the territorial regionalism, and the manorial architecture-the all-Polish one. The condition and quantity of traditional forms are really varied in Poland. For these still existing objects to serve as “model” and inspiration, they have to be examined, classified and made accessible to the designers. The next step is to extract the most distinct features of sub-regions and to popularize the knowledge of these problems. At the Faculty of Architecture of Bialystok Technical University the relative data base concerning the regional architecture is being created on the basis of Microsoft’s ACCESS. It is still another attempt to preserve and uphold the cultural landscape of Poland.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: