Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 350

Reformat results as: short short into frame detailed detailed into frame

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c307
authors	Dobbins, John J.
year	1994
title	Problems of Chronology, Decoration, and Urban Design in the Forum at Pompeii
source	American Journal of Archaeology, vol. 08, no. 4, October, pp. 629-694
summary	This article offers an archaeological and structural analysis of the four main buildings on the east side of the forum at Pompeii and challenges widely published and generally accepted views about the forum. Major problems of chronology, decoration, and urban design are emphasized through a methodology that rejects the prevalent building-by-building approach to the forum in favor of an approach that allows the significance of the urban ensemble to reveal itself. Connections with Rome in areas of building type, iconography, and design are stressed. A reexamination of the evidence points to a comprehensive post-earthquake (i.e., post-62) plan for the east side of the forum, a design whose hallmarks are the unification and monumentalization of the urban center. These goals were achieved by blocking streets, linking facades, upgrading building materials, and emphasizing the now more prominent northeastern and southeastern entrances. The concomitant economic implications are significant. Rather than being a symbol of the depressed economic conditions at Pompeii after 62, the forum with its vigorous and ambitious post-earthquake building program reveals both a de- sire to rebuild on a grand scale and an ability (with assistance from Rome?) to carry it out.
series	journal paper
last changed	2003/04/23 15:14

_id	ddss9437
id	ddss9437
authors	Gu, Jing-wen and Chen, Bing-zhao
year	1994
title	Data Structure and Its Processing in Planar Road Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The planning of roads is one of the most important activities in urban planning and design. Even at the early stage of planning, a planner must take the roads and their planar layout into account and should design them as soon as possible. Then he can use the roads as building blocks for further planning, such as land use, underground layout, detailed district planning and road design. In conventional manual design procedures and according to the "Norm of Transport Planning onUrban Road", it is a tedious task to draw property and side lines of the road network in a city or district and to link them properly at road crosses. With the help of computers, it will be possible to do it automatically. In this paper, the data structure we constructed for our PC software for road processing is first introduced. This data structure defines the road level, the widths of side and property lines, the orientation and topological link of one road with other roads. The procedural considerations for road processing are then given. They include the generation of the side lines and property lines, smooth linking between adjacent roads, rounding of arc roadsegments and all of the physical coordinates for the control points on both centre-lines and property lines. When using this system, a planner only needs to input the centre lines of roads and their width. The roads can be either inputted by using a digitizer or directly sketched on the display. The subsequent processing mentioned above is completed automatically, and the resulting geometric data associated with the road network is stored in a database with the same data structure. The specification on the road cross, which is required during the processing, can be changed interactively and globally, and once changed the regeneration of the above process will be finished very fast.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9475
id	ddss9475
authors	Pollalis, Spiro N.
year	1994
title	Visual Databases as Documentation and On-Line Information Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	After the wide-spread use of computers as task processors, either for algorithmic operations, or for advanced interfaces, the emphasis has shifted on computers as communicators. Beyond basic serial communications, computers serve as providers of information, linking organizations and expanding the bounded rational of professionals. Based on the use of computers as communica-tors, a multiplicity of visual databases for architecture have emerged in the recent years. Building on a maturing technology, those databases address different domains of design, either aiming to provide the designers with information for making informed decisions, or aiming to document prior designs. However, a common characteristic of those visual databases is a separation between the design of the database, versus the entering of the critical amount of data that can make the databases useful. While the research has progressed in the designs, and technological problems of data presentation and data transfer have reached workable solutions, most of the efforts have not succeeded yet in providing the critical mass of information that is required to make the use of the databases desirable. Furthermore, this effort seems as having less research interest, while the necessary amounts of data, and especially the updating of those data, makes the task impossible for academic institutions, and requires interorganizational efforts. This paper focuses on the duality of the databases, either as a form of documentation, or as on-line interactive information systems. Based on that distinction, it examines the required technology and the critical success factors of each type, and proposes that these databases add value to design and they have considerable market effects, which will drive their development and diffusion.
series	DDSS
email
last changed	2003/08/07 16:36

_id	45f0
authors	Coleman, Kim
year	1994
title	Synergism and Contingency: Design Collaboration with the Computer
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 209-217
doi	https://doi.org/10.52842/conf.acadia.1994.209
summary	The outcome of an architectural project is always contingent, dependent upon conditions or events that are not established at the outset. A university design studio does not easily replicate the state of flux which occurs as an architectural commission proceeds. In developing an architectural project, each new situation, whether it be a building code issue, an engineering issue, or a client reaction, must be viewed as an opportunity to further refine and develop the design rather than a hindrance to the outcome. In the design studio I describe in this paper, students test processes which attempt to take advantage of contingent conditions, opening up the design solutions to new possibilities. As a means to open up the design process to new possibilities, this studio introduces the computer as the primary tool for design exploration. Through the computer interface, the work speculates on the possibilities of synergism, defined as the actions of two or more substances or organisms to achieve an effect of which each is individually incapable.' Three synergetic conditions are explored: that between the designer and the computer, that between the designer with computer and designers of previous works of art or architecture, and that between two or more designers working together with the computer. The lack of a predictable result, one that may be obvious or superficial, is a positive byproduct of the synergetic and contingent circumstances under which the designs are developed.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddss9424
id	ddss9424
authors	Dave, Bharat and Schmitt, Gerhard
year	1994
title	Information Systems for Spatial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes a continuing research project aimed at the development of a prototype information system to represent and manipulate models of urban settlements. This inter-disciplinaryproject involves researchers and teachers in the fields of urban design, photogrammetry and CAD. Based upon the requirements identified by the urban design team, the photogrammetry teamused aerial imagery to produce accurate digital models of various features of urban settlements. The models comprise natural features like terrain data, water and vegetation systems, and man made features like transportation networks, land parcels, and built-up volumes. These data are represented in the three dimensions, and they are further linked with nongraphic attributes stored in an external database schemata. The architecture of the system under development has been described previously. In this paper, we focus on the generation of thematic abstractions. The working hypothesis for our current work is that (i) to enable reliable decision-making in urbandesign contexts, we require digital models that are complete and accurate at a certain degree of resolution, and (ii) during various stages in the decision-making, we need useful abstractionswhich encode only the salient information and no more. In more specific terms, we are interested in finding computational means to automatically generate schematic generalizations of data that succinctly represent some information without recomputing or displaying all the vectrs and other details. In this papar we present some of the strategies that we employ to support such operations in our system and also present graphic examples that demonstrate the potential andlimitations of our approach.
series	DDSS
email
last changed	2003/08/07 16:36

_id	d7f4
authors	Gross, M.D.
year	1994
title	Roles for Computing in Schools of Architecture and Planning
source	Journal of Architectural Education, Sep. 94, pp. 56-64
summary	A successful effort to incorporate computing in a school of architecture and planning must satisfy varying student objectives and encompass a range of computing roles. This article reviews these roles and presents a case study of computing at the College of Architecture and Planning (formerly Environmental Design) at the University of Colorado at Boulder. Three categories of instruction make up the curriculum: Tool-using courses teach specific applications, tool-building courses focus on developing new design software, and design theory and methods courses provide rationale for specific computational approaches. Finally, strategies employed in developing this curriculum are discussed.
series	journal paper
email
last changed	2003/04/23 15:14

_id	480c
authors	Hornyánszky Dalholm, Elisabeth and Rydberg Mitchell, Birgitta
year	1994
title	Full-Scale Modelling - A Tool with Many Forms and Applications
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary	The significance of the full-scale mock-up as a tool depends, among other things, on the type and finish of the mock-up, the purpose of its use and the user. The qualities of the tool effect the way it can be used. By working with a new group of users, architecture students, and by supplementing our building system with blocks we now have gained new experience. In the first part of this paper we present the projects that we carried out in teaching, partly inspired by the collaboration with EFA-members. In the second part, we try to compare this experience with our previous work with lay-people. Since the outcome of full-scale modelling means different things to these two categories of users, it affects their relationship to the mock-up. A consequence of this is that the mock-up has to fulfil various demands and it is important to be aware of these and adjust the mock-up and the full-scale modelling procedure according to them.
keywords	Model Simulation, Real Environments
series	other
email
last changed	2003/08/25 10:12

_id	401c
authors	Hornyánszky Dalholm, Elisabeth and Rydberg Mitchell, Birgitta
year	1994
title	FULL-SCALE MODELLING - A TOOL WITH MANY FORMS AND APPLICATIONS
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 83-94
summary	The significance of the full-scale mock-up as a tool depends, among other things, on the type and finish of the mock-up, the purpose of its use and the user. The qualities of the tool effect the way it can be used. By working with a new group of users, architecture students, and by supplementing our building system with blocks we now have gained new experience. In the first part of this paper we present the projects that we carried out in teaching, partly inspired by the collaboration with EFA-members. In the second part, we try to compare this experience with our previous work with lay-people. Since the outcome of full-scale modelling means different things to these two categories of users, it affects their relationship to the mock-up. A consequence of this is that the mock-up has to fulfil various demands and it is important to be aware of these and adjust the mock-up and the full-scale modelling procedure according to them.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:01

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	ddss9453
id	ddss9453
authors	Krafta, Romulo
year	1994
title	Urban Configuration, Attraction And Morphology
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Spatial Interaction (SI), based on the principle of attraction, has set up a powerful way of looking at the behaviour of urban systems. Within-place activities generate and/or attract trips, due to their inner fragmentary nature; several activities articulate a system of locations and flows which is supposed to be regulated by concentration of those activities and distance between them'. SI has been criticized for having a poor theory and little regard to spatial specifics. In general terms, planners and large-scale urban scientists have been more comfortable with it than designers and urban morphologists, whose questions about space configuration are awkwardly dealt with in such a framework. Recently, Space Syntax (SS) has been suggested as an alternative to describe possible roles of space in the urban system. Its theory looks very complex - a deep cultural, anthropological connection between man and space, an atavistic impulse driving the shaping of space. Teklenburg et al have shown, however, that it is, in fact, very simple and not far from the rude assumptions of SI: a matter of distance and orientation3. Hence, what does look new is just its way of describing orientation, through the axiallity of public space. Axial lines retain the fundamental issue of connectivity; so they describe space more efficiently than the traditional zones or links used in SI models. SI says little about configuration, SS says little about interaction between spaces and activities, and both say nothing about morphology, or the configurational development of urban systems. An alternative approach is suggested: (i) urban spatial configurati-on (urban grid and built form) strongly conditions activity location and flows, in the short term. In this way, a convenient description of such a configuration should denounce its potential to housing activities and generate flows. This required description should take the grid axiallity as a measure of connectivity and orientation, as in SS, as well as the built form as a measure of attraction, as in SI; (ii) activity location and flows strongly conditions urban spatial configuration change, in the long run. Location and flow patterns create values that are expressed by an increasing conflict between rising land values and declining building values. As a result, configuration is taken as a particular state of a morphology whose transformation rules are an economic expression of spatiality. Flows are cause and effect in the lagged process of mutual transformation which shapes the urban space.
series	DDSS
email
last changed	2003/08/07 16:36

_id	abb0
authors	Sabater, Txatxo and Gassull, Albert
year	1994
title	On Digital Press
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 121-126
doi	https://doi.org/10.52842/conf.ecaade.1994.121
summary	Our contribution paper is divided in two parts, the first one is about our experience in building up a CD ROM on Cerda's theory, and the second is a daring -corresponding to our ignorance-, is a suggestion. To publish on a digital support it is necessary to clear one's mind. On Production. The nature of the documents, its origin. Order and division of labour. Some notes about the way to produce it. General documentation management. On critical paths. Digital Press. Towards an ECAADE Digital Press?
series	eCAADe
last changed	2022/06/07 07:56

_id	9779
authors	Smeltzer, G.T.A., Mantelers, J.M.M. and Roelen, W.A.H.
year	1994
title	The Application of Virtual Reality Systems in Architectural Design Processes
source	BIT Note Publication 95/1, Building Information Technology, Eindhoven
summary	This publication describes the development and the application of a Virtual Reality system for the architectural design process. It is based on the results of research into Virtual Reality technology and in particular into the possibilities of a natural interface between a designer and a design system. This description is also based on the development of a laboratory set up for a "full immersive" and a "partially immersive" Virtual Reality application. This application offers a designer the possibility of modifying and assessing a 3D design model in "Virtual Reality" and is used in the course of several case studies. One of these case studies was the making of a presentation of a house design to possibly interested parties. The other case study was the use of Virtual Reality in the course of a design process. Finally this publication includes the description of some future and anticipated developments. The research problem is mainly posed by the questions regarding the ways in which the design process changes under the influence of amongst other factors the Virtual Reality technology. Other questions concern the ways in which the interface between a designer and a design system can be made as natural as possible, the way in which a design model can behave as autonomous as possible, and the way in which a representation can be made as realistic as possible. With regard to these the starting points were respectively the use of sensors, the definition of behaviour characteristics and the use of illumination simulations.
series	other
last changed	2003/04/23 15:50

_id	0465
authors	Szövényi-Lux, Miklós
year	1994
title	Virtual Future!?
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 215
doi	https://doi.org/10.52842/conf.ecaade.1994.x.o0h
summary	Architecture was born long, long ago with the help of those people who first realised that they are not only building houses but, what is more important, thrilling and has been the focus of many debates, creating space. In the beginning man created space by adding and combining different volumes of masses. They thought that space can be perceived as determined by different points of orientation placed around us. Later people started to realise that perception of space is a little bit more sophisticated. Perhaps everybody has smiled at a baby who standing up for the first time in his life in his playpen, extending his hands towards objects on the nearby table physically unreachable for him. If he was an adult, people would think perhaps something is wrong with him, when he extends his hands towards things we surely know are impossible to reach from his actual position. So how come we can judge with exactitude the place of different objects in space? Maybe by the time needed for the movement to get there. Let us not forget that the baby's first real movement is when he starts to walk and then he starts to get the feeling of this three dimensional world, around which can be only realised simultaneously in space and time. Anyone can say that this is an interesting theory, but who cares? It is said that most of the architects, who are real designers have a keen sense of creating and perceiving space. They are far more interested in the perfection of the created space with all its details than anything else. And here is where a CAD program can come into the picture. Talking about a real CAD program that means from the point of view of a designer, a silent friend who never cheats or boasts, who takes him in SPACE wherever he wants to go and shows him his CREATION as an extending arm between his imagination and the reality.
series	eCAADe
last changed	2022/06/07 07:50

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	ddss9435
id	ddss9435
authors	Grimshaw, Robert
year	1994
title	Simulation Models and Facility Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The paper is based on a now completed research project funded by SERC and carried out by the author and former colleagues from the University of Salford in a multi-disciplinary team comprising building maintenance experts and operational researchers. The project sought to develop a model to simulate manpower deployment in a building maintenance organisation using a single case study. Although the results of the project were limited in scope, being more concernedwith the development of the methodology to deal with such problems, the work did have useful outcomes including the development of a database which contained detailed information on the hourly deployment of labour on maintenance and facilities work over a 12 month period. The proposed paper will consider the implications of the output from both the database and the simulation model for the planning of facilities and the deployment of labour in developing and maintaining those facilities.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9447
id	ddss9447
authors	Jabi, Wassim
year	1994
title	An Outline of the Requirements for a Computer Supported Collaborative Design System
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of specific rules and grammars. Yet, there is a general consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still cannot support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. Thus, if CAAD is to ultimately benefit the design process, it must (1) emulate and support the design team approach to architectural problem solving and (2) be deployed in the earliest possible stages of the design process. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the interaction between a set of requirements (the building program) and the architectural solution that satisfies them (the schematic design). The core of this interaction forms the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modelling (based on the NIAM notation), object-oriented algorithms, and distributed agents. Based on a literature survey and earlier findings on the role of artifacts in collaborative design, this paper outlines the requirements for the above system and reports on initial experiments. Thus, it constitutes the first stage of a research project that will lead to a full implementation of a distributed collaborative computer environment addressing the above issues.
series	DDSS
type	normal paper
email
last changed	2008/06/12 16:32

For more results click below: