Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 120

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9402
id	ddss9402
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1994
title	Design of a View-Based DSS For Location Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the design of a DSS for locating facility networks. The proposed DSS is based on the principle of dynamic data definitions. The declarative and procedural forms of knowledge involved are identified by a logical analysis of planning tasks. The DSS supports an iterating process of adjusting and evaluating plan options. A flexible and interactive problem solving environment is achieved by means of a user defined set of views that captures both forms of knowledge. Each view describes the system to be planned in terms of a set of variables and attached evaluation procedures. The views are dynamic and linked data structures, so that changes in one view automatically lead to updating all linked views. The DSS supports both the specification of the set of views and its application to solve a specific location problem.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9410
id	ddss9410
authors	Bodum, Lars
year	1994
title	Hypermedia-aided GIS in Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Town planning in Denmark is undergoing major changes from a planning approach focusing on regulation and individual frameworks for town districts, to a planning approach emphasizing the urban characteristics and drawing overall guidelines for planning. At the same time, attention has shifted to urban renewal and urban remodelling. This means that more qualitative data are needed.These new data types such as digital film, are to form part of a future GIS for the town. The digital film will change the impression of what data can profitably be used in a GIS. Even animations and 3D models, which were previously processed with considerable data power can beplayed as digital films. In the course of the next few years, the most ordinary applications will be able to play digital films and together with the progress made in other media, a development towards hypermedia will be a possibility. The paper will give some examples of how this integration may be carried out. In continuation of the preparation of a municipality atlas and in connection with an EC-subsidized urban renewal project, the municipality of Aalborg has chosen to work outa digital catalog which will in time replace the present local planning regulations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	ddss9424
id	ddss9424
authors	Dave, Bharat and Schmitt, Gerhard
year	1994
title	Information Systems for Spatial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes a continuing research project aimed at the development of a prototype information system to represent and manipulate models of urban settlements. This inter-disciplinaryproject involves researchers and teachers in the fields of urban design, photogrammetry and CAD. Based upon the requirements identified by the urban design team, the photogrammetry teamused aerial imagery to produce accurate digital models of various features of urban settlements. The models comprise natural features like terrain data, water and vegetation systems, and man made features like transportation networks, land parcels, and built-up volumes. These data are represented in the three dimensions, and they are further linked with nongraphic attributes stored in an external database schemata. The architecture of the system under development has been described previously. In this paper, we focus on the generation of thematic abstractions. The working hypothesis for our current work is that (i) to enable reliable decision-making in urbandesign contexts, we require digital models that are complete and accurate at a certain degree of resolution, and (ii) during various stages in the decision-making, we need useful abstractionswhich encode only the salient information and no more. In more specific terms, we are interested in finding computational means to automatically generate schematic generalizations of data that succinctly represent some information without recomputing or displaying all the vectrs and other details. In this papar we present some of the strategies that we employ to support such operations in our system and also present graphic examples that demonstrate the potential andlimitations of our approach.
series	DDSS
email
last changed	2003/08/07 16:36

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	aeeb
authors	Grant, M. and Paterson, I.
year	1994
title	Urban Modelling
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 135-139
doi	https://doi.org/10.52842/conf.ecaade.1994.135
summary	This project was an investigation into the application of Urban Information Systems [UIS] based on 3-Dimensional computer models. The research centred on a collaboration between the Architecture and Buildings Aids Computer Unit, Strathclyde [ABACUS] and the Edinburgh Old Town Renewal Trust [EOTRT] to develop a detailed computer model of Edinburgh's old town. The area of particular interest is the development of an interface to a database of property related information. This provides a means of analysing the multi-layered and multi-dimensional spatial data which is characteristic of urban environments. The research also investigated how, by using multi media technology as a data integration tool , urban models could be used to improve decision making in the framework of urban management.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ddss9445
id	ddss9445
authors	Hillier, B., Penn, A., Dalton, N., Chapman, D. and Redfern, F.
year	1994
title	Graphical Knowledge Interfaces: The Extensive and Intensive Useof Precedent Data Bases in Architecture and Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Space syntax' is a family of techniques for the analysis of architectural and urban space which can be used both in research and design mode. This means, for example, that a redevelopment area in an urban context can be researched using space syntax models which can then be turned round and used as the basis for design idea of a 'graphical knowledge interface' (GM) is a further development of this in feeding research into design. It starts from the important role that the analysis and comparison of 'precedents', that is, cases with some similarity of the design problem in hand, often play in design. In a GM, 'precedents' which have already been researched using the space syntax methodology and which are relevant to a particular design problem - say a set of urban areas or a set of housing estates - can be brought into the modelling technique, so that the designer has on hand not simply a space syntax model of the problem in hand but an intelligent 'precedent' in the form of graphical and statistical representations which can be manipulated and interrogated during the design process, in much the same way as discussion of precedent are currently brought into design but with much more complex data and much more powerful theoretical tools. GM can be used as intensive mode, in which many different kinds of data - say on land uses, rents, or crime rates - are added to the model of an area, or in extensive mode where the emphasis is on comparing, say, the structures of a large number of urban areas. The GM will be illustrated through a worked example of a recent major urban design project in which the team has participated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	b9c4
authors	Kim, Inhan
year	1994
title	Data representations in an integrated architectural design environment
source	University of Strathclyde, Dept. of Architecture and Building Science
summary	The architectural design process is very complex and involves cross-disciplinary communication among many related fields. Given the further problems arising from the technological advances in building materials and construction methods, an integrated design environment becomes a central design issue. There have been many attempts to analyse and structure the design process as a uniform hierarchical framework. Most of the attempts resulted in a vague and inappropriate outcome due to the lack of understanding of architectural design complexity and inconsistent design data control sequence. A design problem cannot be comprehensively stated because the design problem has a multi-disciplinary nature and the design problem itself evolves as solutions are attempted by the designer. Therefore, an ideal CAAD system should have the capability to accommodate the multi-disciplinary nature of design and should not prescribe or restrict design concepts and design knowledge. A well designed integrated design environment provides more information and invokes creative imagination for each design stage, and therefore creative decision making by the designer can be achieved. This thesis proposes a prototype architectural design environment, Hybrid Integrated Design Environment [HIDE], which aims to integrate all applications for designing a building. Within the object-oriented design environment, a unified data model and a data management system have been implemented to seamlessly connect all applications. Development of the environment needs to consider the fundamental interaction between each module. Devising a data structure that is appropriate to an effective data communication among the various design stages is essential in a totally integrated CAAD system. The suggested unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. By means of the unified data model, integrated CAAD systems could represent and exchange design information at a semantic level, i.e. the user’s way of thinking, such as exchanging components and features of a building rather than graphical primitives. In consequence, the unified data model reduces the misunderstandings and communication problems among the multiple disciplines of architectural design. The suggested data management system supports the consistent and straight forward mechanisms for controlling the data representation through the inter-connected modules. It is responsible for creating, maintaining, and viewing a consistent database of the design description. It also helps to perform effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. To support inter-disciplinary communication of design concepts and decisions, the integrating of relevant CAAD tools is essential. In the environment, the integration of CAAD tools has been performed on the basis of how well computerized design tools can assist designers to develop better solutions, enabling them to manipulate and appraise varying solutions quickly and with a minimum of effort in an environment conducive to creative design. A well designed user interface system can also benefit the seamless working environment. The proposed user friendly interface system allows a user to explore the environment in a highly interactive manner. From the development of the early data model to the final design, a user could benefit from the prototypes and methods of the user interface system. The ultimate goal of the prototype environment is to suggest a future design environment which helps the architect to have minimum discontinuity in his creativity and make the design process similar to the natural design process with the help of a set of design assistance modules. A prototype version of HIDE has been implemented and a demonstration of the environment is part of this thesis.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddss9476
id	ddss9476
authors	Porada, Mikhael and Porada, Sabine
year	1994
title	"To See Ideas" or The Visualizing of Programmatic Data Reading Examples in Architecture and Town Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Whether images are still in the mind, metaphors, sketches or icons, they play a crucial role. They have always been the heuristic pivot around which the process of artefact design organizes itself, particularly in architecture and town-planning. "To see ideas" through computer ideograms is to experiment an interesting and new direction for "pictural approach" supported design. Cognitive psychology emphasizes the important part played by mental images in reasoning, imagination in the working of human intelligence and the construction of mental images as cognitive factors underlying reasoning. It also points out how close computerized objects and mental schemata are. "To reason over a situation is first to remember or build some mental models of this situation; second to make those models work or simulate them in order to observe what would happen in different circumstances and then verify whether they fit the experiment data; third to select the best model, a tool meant to sustain and amplify the elaboration of mental models, which is a spontaneous activity". We introduce our exploration of the direct transmission of mental models through computer ideograms. We study the "operative" and the "expressive" aspects, and this allows us to analyze how some aspects in a field of knowledge are represented by ideograms, schemata, icons, etc. Aid to imagination, reasoning and communication by means of a graphic language must be limited to some figurative relevant aspects of the domain considered; it should not aim at a realistic simulation. Therefore, the important role played by icons and the spatial schematic representation of knowledge is emphasized. Our hypothesis is that an architectural concept does not result from an inductive process, but rather is built to solve problems through the direct representation of ideas with ideograms. An experiment was conducted with a graphic language, a dynamic scenography and actor-objects. The language allows one to build and visualize models from the various domains of knowledge of the object. The dynamic scenography can explore and simulate kinetically those models by means of staging various narrations and visual scenarios. The actor-objects play various and complementary parts in order to make the image explicit and link it with the concept. We distinguish between two parallel levels of reality in computer ideographics: one concerns the model, it represents the visualization of a graphic model at a particular moment and according to a particular representation, the other concerns the ideogram.
series	DDSS
last changed	2003/08/07 16:36

_id	6b1d
authors	Porada, Mikhael
year	1994
title	Architectural Briefing Data Representation and Sketch Simulation Computer Environment
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 55-59
doi	https://doi.org/10.52842/conf.ecaade.1994.055
summary	Reflection about the architectural programme starts with the analysis of its writing, its "style" which bears not only the "griffe" of the programmer but as well the structure, methodology, codes of reading, etc. particular to a programming approach. The programme structure corresponds in most cases to the different levels in the text's format and the composition modes of representing data and their relations. The choice made can either facilitate or impede the reading as interpretation of the programme. The programmer’s aim should be to open the text to reading towards a "synthetic schematic" summary, a sort of cognitive threshold which allows the reader to understand both the client's objectives and the designer's intentions enhanced by his experience. Articulating a designer's experience means focusing on his knowhow and memory. The designer's recollected knowledge and heuristic approaches to the solution of a basic design problem - types, his readings and spatial evaluations permanently feed the knowhow. It is important for the architect to have access to past examples, to the collective memory of his workplace, and a repertoire of readings, notes, sketches, influences and citations. It is therfore equally important that a computer environment also have a multimodal "architect's memory" or "project memory" module in which different forms of representation are classified, and made accessible as memory components. It is also necessary to have the possibility to access at any moment in an interactive manner to the recomposition, addition and adaptation of these mnemonic components. The information coming from the programme, classified as descriptive, prescriptive and quantitative types of data, must be able to be interrogated in different modes of representation : text, matrices, nets, diagrams, and so on, so that the pertinent information can be extraded at any given design process stage. Analysis of competition programmes show that often the description of an activity, for example, the Great Stadium competition in Paris, is described by several pages of text, a circulation diagram with arrows and legend, a topological proximity diagram with legend and as table activity - areas . These different representations, which are supposed to be complementary and give the most pertinent view of the client needs, show in fact after analysis, many description problems, incoherance, and which result in a reading difficulty.
series	eCAADe
last changed	2022/06/07 08:00

_id	ddss9480
id	ddss9480
authors	Schipper, Roel and Augenbroe, Godfried
year	1994
title	An Information Model of Energy Performance in Early Building Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design is a creative and dynamic process. The level to which a future generation of Intelligent Integrated Building Design Systems will be able to support this process depends on the power of the underlying conceptual models to cover the semantics of design. In the definition of generic building models, the concept of constraints appears to be a powerful means to formalize those semantics. Both design performance goals, and rules and relations in design composition can be described as constraints. The Engineering Data Model (EDM), recently developed at UCLA, acknowledges this fact. It allows the formal definition of object oriented building models, using constraints as the central concept for describing relations. This paper will discuss the development of an EDM building model for the integrated design for energy performance, and the implementa-tion of this model in a small prototype system. We will specifically deal with modelling informati-on in the early design stages. This information typically consists of multiple global design alternatives on one hand, and a wide range of conflicting design goals on the other hand. In the paper, it is demonstrated that integration of these conflicting views on building performance in one coherent model is the key to obtaining an optimal design result. Using the Dutch building codes for energy performance (NEN 2916) as an example of design goals, the concepts and relations of these building codes were translated to a formal EDM model. A small shell was built on top of this computer-interpretable model, to demonstrate the useability of the model during the solving of a concrete design problem. It is shown that the EDM building model is able to provide the designer with integrated information through combining different sets of performance constraints and design alternatives in one environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9496
id	ddss9496
authors	Veenendaal, Martin H.
year	1994
title	Optimalization of Visualization: Graphical Diagonalization andClustering of Combinatorial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The analysis of combinatorial data is common to many disciplines as diverse as ethology, mathematics, computer science, psychology, demography, and architecture. Combinatorial data concern single relations that exist between the element pairs within one single pool of elements. TRI is a computer program that enables users to manually order combinatorial OTdangular) data matrices. "Ordering" in this context means placing high cell entries, coded as large dots, close together in clusters and close to the matrix's diagonal. Ordering, however, constitutes a very complex task. In order to support the ordering process, a straightforward measure has been developed which weighs the "amount" of clustering and diagonalization. The measure's value can be projected onto the monitor and perhaps serve as a "success indicator". A first experiment assessing the usefulness of the measure revealed that it does not consistently reflect subjective judgements of perceptual "order'. People may discern salient (although task irrelevant) patterns and regularities in dot configurations, for which the measure's cold calculus is insensitive [1]. In ongoing "human factors" experiments, the capability of experimental subjects to see through such "would be" order will be tested. One group will be amply instructed as to what the measure measures and how, and a second group will receive extensive visual instruction, using example matrices. The results of these and other experiments will help us decide whether or not to implement the measure in 1'RI, and how we can otherwise improve TRI as a powerful design and decision support tool.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9502
id	ddss9502
authors	Wang, Ming-Hung and Chao, Hua-Yu
year	1994
title	Spatial Schemata and Design Competence: A Case of Beginning Designers
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the course of learning professional skills in architectural design, students will develop, usually with the help of instructors, certain ways of analyzing spatial relations. Such spatial schemes are considered critical means to the comprehension of the graphical representations of spaces, and therefore schemes of different kind will have different effects on design performance. This study intends to explore this issue. Three sets of experiments are conducted to test our working hypotheses as stated as follows: (i) to reproduce a plane graphic requires knowledge and skills different from those to recognize; (ii) some schemes are more effective than others in reproducing plane graphics; (iii) the kind of schemes that can effectively reproducing given forms (in plane graphics) can also have positive effects on design capabilities. It is interesting to further differenti-ate the kinds of schemes and their power as design tools. All these experiments employ three kinds of spatial schemes: the categorical, the referential, and the hierarchical from the results we can reach the following conclusions: (i) reconstruction is a different mental activity from recognition which is mainly a comparison between the input data and the known characteristics reconstruction relies more on the structured relations among data that should be established in the course of recognition. Therefore, effective cognition is a part of design competence; (ii) categori-cal schema is found most effective in recognition test. The quality of this type has to do with the quality of its contents. Referential schema can effectively relate elements to one another and to the context in which they are located. This schema contributes to the quality of spatial compositions. Hierarchical schemata are more general that can help identify dependent relations among elements, and therefore reduce the complexity. Conceivably this can increase the efficiency of problem-solving in design.
series	DDSS
last changed	2003/08/07 16:36

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9440
id	ddss9440
authors	Hall, Tony
year	1994
title	Visualisation for the Evaluation of Planning Proposals - An Example Based on Colchester, UK
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer visualisation has an important role to play in the assessment of planning proposals both large and small but planning agencies have been slow to take advantage of it. Although appropriatehardware and software are now available at comparatively reasonable prices, staff time for data input is still a major cost. An economic way of proceeding can be to model in advance important and sensitive parts of a town so that small development proposals within them can be visualised comparatively quickly and cheaply as they come in. Following a request from the Borough Council, the High Street in Colchester, Essex, was modelled using 3D Studio. This model was then used to assess the visual impact of pedestrianisation and traffic control measures and it was then available to assist the routine development control process in this part of town. The paperevaluates the success of this approachand makessuggestions for its future use. Its possible developmentinto a multi-media facility is also discussed.
series	DDSS
email
last changed	2003/08/07 16:36

_id	2f05
authors	Kashiwagi, D.T.
year	1999
title	The construction delivery system of the information age
source	Automation in Construction 8 (4) (1999) pp. 417-425
summary	The Performance Based Studies Research Group (PBSRG) at the Del E. Webb School of Construction, has developed a methodology to process data into information to reduce facility system life-cycle cost and risk of nonperformance. The methodology reshapes the current construction industry model from a `low-bid', `all the same' industry into a `value added' performance based industry. The performance information regulated industry changes roles, partnerships, and communication methods between the construction industry and facility owners. The PBSRG research effort (US$1000K, 1994–present) includes the design and improvement of the Performance Based Procurement System (PBPS), performance data collection on general, mechanical, electrical, landscaping and janitorial services, and design services in the public and private commercial sectors, the identification of performance levels in the industrial sector, and the design of a performance based structure for a manufacturer of construction systems, as well as the education of the facility owners and the construction industry.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: