CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 53

_id b110
id b110
authors Abadi Abbo, Isaac and Cavallin Calanche, Humerto
year 1994
title Ecological Validity of Real Scale Models
source Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 31-40
summary Space simulation is a technique employed by architects, urban designers, environmental psychologists and other related specialists. It is used for academic and research purposes, as an aid to evaluate the impact that the built environment or that to be built would yield in potential or real users. Real Scale Model is organized as one of the models which represents more reliable spatial characteristics in space simulations. However, it is necessary to know the ecological validity of the simulations carried out, that is the degree in which laboratory results could be taken as reliable and representative of real situations. In order to discover which variables of the model used are relevant so that their perception results ecologically valid in respect to reality, a research has been designed in which simulations of specific spaces are appraised both in real space and in the real scale model. The results of both evaluations were statistically analyzed and it shows no significative differences in psychological impressions between the evaluation of real spaces and real scale model. These ecological validation of the real scale model could be of great use to estimate the validity of the results obtained in spaces simulated in the laboratory.
keywords Model Simulation, Real Environments
series other
type normal paper
more http://info.tuwien.ac.at/efa
last changed 2006/06/24 09:29

_id 0ecc
authors Anh, Tran Hoai
year 1994
title APPLICATION OF FULL-SCALE MODELLING IN VIETNAM: AN OUTLINE FOR DISCUSSION
source Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary This paper discusses the possibility of applying full-scale modelling in Vietnam, a non-western so called developing country. It deals with two main questions: 1) Is the application of full-scale modelling to be restricted to the West only? 2) what are the possibilities, constraints and fields of application - with attention to the methodological validity and technical solution for full-scale modelling in Vietnam? It is argued that since full-scale modelling is based on people-environment interaction, it should, in principle, apply to studies about people–environment relation anywhere on earth. On the methodological validity, it is discussed that application of full-scale modelling in Vietnam faces similar methodological problems as encountered in European applications (such as people's behaviour in experiment, ability to understand the abstraction of models, etc.) although at another level as this paper will make clear. However, it would be needed to design a modelling kit that is of low costs and adapted to the availability of local materials and suitable for the climatic condition of Vietnam. Two fields of application are projected as most applicable in Vietnam: modelling in architectural education and research investigation. Application for user's participation in the design process will depend on the development of building policy in the country.
keywords Model Simulation, Real Environments
series other
type normal paper
last changed 2004/05/04 11:00

_id 592b
authors Apollonio, F., Carini, A., Farina, R., Nuti, F. and Tolomelli, F.
year 1994
title THE ITALIAN FULL-SCALE MODEL LABORATORY: CONSIDERATIONS ABOUT SOME TOOLS FOR ARCHITECTURAL EXPERIMENTATION
source Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 71-82
summary The Italian simulation laboratory carries out most of its activity within the experimental programmes promoted by the Ministry of Works. Within this context, we conducted studies based on the topics of EUROPAN competitions for young architects, built models based on EUROREX programme's projects and analyzed experimental projects directly financed by the Ministry (mainly restoration projects).
keywords Model Simulation, Real Environments
series other
type normal paper
more http://info.tuwien.ac.at/efa
last changed 2004/05/04 11:01

_id fff9
authors Batty, M.
year 1994
title A Chronicle of Scientific Planning: The Anglo-American Modeling Experience
source Journal of the American Planning Association 60(1), pp. 7-16
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series journal paper
last changed 2003/05/15 21:45

_id sigradi2008_049
id sigradi2008_049
authors Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year 2008
title Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series SIGRADI
email
last changed 2016/03/10 09:47

_id 6838
authors Berberidou-Kallivoka, Liana
year 1994
title An Open Daylighting Simulation Environment
source Carnegie Mellon University, Pittsburgh
summary Various studies have shown that performance simulation tools have not been integrated effec- tively in the architectural design process. The conventional lighting simulation tools have been characterized as decision verification tools rather than design support tools. Particularly in the early design stage, when crucial and often irreversible decisions are made, this evident lack of appropriate lighting simulation environments represents a serious drawback. The "mono-directionality" of the conventional simulation tools can be identified as one of the factors responsi- ble for insufficient integration of computational lighting modeling tools in the design process. In response to this circumstance, this thesis presents the conceptual background and the proto- , typical realization of an "open" daylighting simulation environment (GESTALT) to support architectural lighting design and education. Open simulation environments aim at extension (and inversion) of the design-to-performance mapping mechanisms of the conventional build- ing performance simulation tools. Toward this end, two fully operational versions of GESTALT have been implemented. GESTALT-01 is an explicit implementation based on invertible "fast-response" computational modules. GESTALT-02 is an implicit version that uses a comprehensive computational daylight simulator and investigative projection technique for performance-driven design exploration. Concepts, implementations, case studies, contributions and future directions are presented.
series thesis:PhD
last changed 2003/02/12 22:42

_id adb0
authors Bishop, I.
year 1994
title The role of visual realism in communicating and understanding spatial change and process
source Visualization in Geographical Information Systems. H. Hearnshaw and D. Unwin. Chichester, John Wiley & Sons, pp. 60-64
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series other
last changed 2001/06/04 20:27

_id 7d6c
authors Chapin, William L., Lacey, T. and Leifer, Larry
year 1994
title DesignSpace: A Manual Interaction Environment for Computer Aided Design DEMONSTRATIONS: Virtual Reality Multimedia
source Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 33-34
summary DesignSpace is a computer-aided-design (CAD) system that facilitates dexterous manipulation of mechanical design representations. The system consists of an interactive simulation programmed with a seamless extended model of the designer's physical environment and driven with continuous instrumentation of the designer's physical actions. The simulation displays consistent visual and aural images of the virtual environment without occluding the designer's sensation of the physical surroundings. Developed at Stanford University's Center for Design Research (CDR), DesignSpace serves as an experimental testbed for design theory and methodology research. DesignSpace includes significant contributions from recent CDR development projects: TalkingGlove, CutPlane, VirtualHand, TeleSign, and VirtualGrasp. The current DesignSpace prototype provides modeling facility for only crude conceptual design and assembly, but can network multiple systems to share a common virtual space and arbitrate the collaborative interaction. The DesignSpace prototype employs three head-tracked rear projection images, head-coupled binaural audio, hand instrumentation, and electromagnetic position tracking.
keywords Virtual Environment; Dexterous Manipulation; Interactive Simulation; Presence; Spatial Acoustics; Manual and Gestural Communication; Teleconference; Collaboration
series other
last changed 2002/07/07 16:01

_id e751
id e751
authors Clayton, M.J., Kunz, J.C., Fischer, M.A. and Teicholz, P.
year 1994
title First Drawings, Then Semantics
doi https://doi.org/10.52842/conf.acadia.1994.013
source Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 13-26
summary The Semantic Modeling Extension (SME) prototype implements a unique approach to integrated architectural CAD that places the drawing act first in the design process. After drawing a design idea using a computer graphic system, the designer interprets the design, providing semantic content to the graphic entities. An interpretation expresses the meaning of the design with respect to a particular issue, such as structural sufficiency, energy consumption, or requirements for egress, and provides reasoning to evaluate the design addressing that issue. A design may have many interpretations to express the multiple issues that are relevant in a design project. The designer may add or delete interpretations of the design as issues change during the course of the project. Underlying the SME prototype are the concepts of form, function and behavior. In the prototype, evaluation of a design is done by deriving behavior from the graphically represented forms and relating the behavior to stated functions or requirements. The concepts of interpretations and form, function and behavior together establish a virtual product model for design. In contrast to component based approaches to product modeling that tightly bind form representations to their behavior and function, a virtual product model allows the designer to manipulate the relations among these three descriptors of a design, and thus manipulate the semantics of the design entities. By distinguishing between the act of proposing a design by drawing the conceived form and the act of assigning meaning to the form, the virtual product model approach supports both graphic thinking for design synthesis and symbolic reasoning for design evaluation. This paper presents a scenario of the use of the SME prototype in building design; provides an analysis of the design process and computational support described in the scenario; contrasts a virtual product model approach with a component-oriented product model approach; describes the software implementation of SME; and presents implications and conclusions regarding design process and technical integration.
series ACADIA
email
last changed 2022/06/07 07:56

_id 0df3
authors Dam, Hanke van
year 1994
title PLAN EVALUATION BY SIMULATION
source Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 15-22
summary The full-scale model in Wageningen was developed some 35 years ago and has been in use ever since. In a recent brochure about our mock-up system you will find four applications of our model: education, research, consultancy and information. In this paper some information about these four subjects will be presented in the sequence just mentioned. First some general information will be given about the system and about the methodological aspects of the use of our model, named 'the Structural Space Planning Method'.
keywords Model Simulation, Real Environments
series other
type normal paper
more http://info.tuwien.ac.at/efa
last changed 2004/05/04 11:01

_id 4f82
authors Dave, B. and Schmitt, G.
year 1994
title Information systems for urban analysis and design development
source Environment and Planning B: Planning and Design 21, pp. 83-96
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series other
last changed 2001/06/04 20:27

_id bd9d
authors Day, A.
year 1994
title From Map to Model: the Development of an Urban Information System
source Design Studies 15, pp. 366-384
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series journal paper
last changed 2003/05/15 21:45

_id 95a6
authors Decker, J.
year 1994
title The validation of computer simulations for design guideline dispute resolution
source Environment and Behaviour 26(3), pp. 421-443
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series other
last changed 2001/06/04 20:27

_id 8c54
authors Flemming, U.
year 1994
title Get with the program: common fallacies in critiques of computer-aided architectural design
source Environment and Planning B: Planning and Design 21, pp. 106-116
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series other
email
last changed 2003/02/26 17:24

_id 778e
authors Gann, D.
year 1994
title Archaeological Site Reconstruction With AutoDesk's 3D Studio
source CSA Newsletter Vol 7:3 Nov 1994
summary 3D Studio is an IBM-compatible computer modeling program that enables users to create three-dimensional renderings of a variety of objects. In its ability to import a wide variety of maps and other images, 3D Studio allows for the realistic rendering of models created within AutoCAD or other 3D CAD packages. Over the past year, the Homol'ovi research program has been utilizing this software to create near photo-realistic renderings of conjectural site models. My own interests in three-dimensional computer modeling developed out of work at the site of Homol'ovi IV, a 150-room pueblo site located near Winslow, Arizona. The site was situated upon a steep 30-meter bluff with a bedrock cap. Approximately 24 rooms were located on top of the bedrock cap, with another 125 rooms situated on the slope of the butte. During the 1989 field season five structures were excavated, while a separate crew worked clearing and mapping the tops of walls. Mapping was accomplished with a Topcon EDM/theodolite station, and a standard map was created from this process. (See Fig. 3.) While the map was sufficient to show the general layout of the site, I remained unsatisfied; a 2D plan view simply did not convey the vertical dimension of the pueblo. At this point the Homol'ovi Research Program purchased a copy of AutoCAD in order to begin exploring three-dimensional mapping and modeling.
series other
last changed 2003/04/23 15:50

_id a3ef
authors Garcia, F., Fernandez, A. and Barrallo, J.
year 1994
title Discovering Fractal Geometry in CAAD
doi https://doi.org/10.52842/conf.ecaade.1994.069
source The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 69-74
summary Fractal geometry provides a powerful tool to explore the world of non-integer dimensions. Very short programs, easily comprehensible, can generate an extensive range of shapes and colors that can help us to understand the world we are living. This shapes are specially interesting in the simulation of plants, mountains, clouds and any kind of landscape, from deserts to rain-forests. The environment design, aleatory or conditioned, is one of the most important contributions of fractal geometry to CAAD. On a small scale, the design of fractal textures makes possible the simulation, in a very concise way, of wood, vegetation, water, minerals and a long list of materials very useful in photorealistic modeling.
series eCAADe
last changed 2022/06/07 07:51

_id 337f
authors Harris, B.
year 1994
title The Real Issues Concerning Lee's "Requiem"
source The Journal of the American Planning Association 60(1), pp. 31-34
summary Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords 3D City Modeling, Development Control, Design Control
series journal paper
last changed 2003/05/15 21:45

_id 480c
authors Hornyánszky Dalholm, Elisabeth and Rydberg Mitchell, Birgitta
year 1994
title Full-Scale Modelling - A Tool with Many Forms and Applications
source Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary The significance of the full-scale mock-up as a tool depends, among other things, on the type and finish of the mock-up, the purpose of its use and the user. The qualities of the tool effect the way it can be used. By working with a new group of users, architecture students, and by supplementing our building system with blocks we now have gained new experience. In the first part of this paper we present the projects that we carried out in teaching, partly inspired by the collaboration with EFA-members. In the second part, we try to compare this experience with our previous work with lay-people. Since the outcome of full-scale modelling means different things to these two categories of users, it affects their relationship to the mock-up. A consequence of this is that the mock-up has to fulfil various demands and it is important to be aware of these and adjust the mock-up and the full-scale modelling procedure according to them.
keywords Model Simulation, Real Environments
series other
email
last changed 2003/08/25 10:12

_id 401c
authors Hornyánszky Dalholm, Elisabeth and Rydberg Mitchell, Birgitta
year 1994
title FULL-SCALE MODELLING - A TOOL WITH MANY FORMS AND APPLICATIONS
source Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 83-94
summary The significance of the full-scale mock-up as a tool depends, among other things, on the type and finish of the mock-up, the purpose of its use and the user. The qualities of the tool effect the way it can be used. By working with a new group of users, architecture students, and by supplementing our building system with blocks we now have gained new experience. In the first part of this paper we present the projects that we carried out in teaching, partly inspired by the collaboration with EFA-members. In the second part, we try to compare this experience with our previous work with lay-people. Since the outcome of full-scale modelling means different things to these two categories of users, it affects their relationship to the mock-up. A consequence of this is that the mock-up has to fulfil various demands and it is important to be aware of these and adjust the mock-up and the full-scale modelling procedure according to them.
keywords Model Simulation, Real Environments
series other
type normal paper
email
more http://info.tuwien.ac.at/efa
last changed 2004/05/04 11:01

_id 0726
authors Kadysz, Andrzej
year 1994
title CAD the Tool
doi https://doi.org/10.52842/conf.ecaade.1994.x.k7r
source The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
summary What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.

series eCAADe
last changed 2022/06/07 07:50

For more results click below:

this is page 0show page 1show page 2HOMELOGIN (you are user _anon_958861 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002