Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 362

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9456
id	ddss9456
authors	Kubiak, Bernard and Korowicki, Antoni
year	1994
title	Identification And Analysis of the Recreational Behaviour Forms and the Needed Recreational Space Using the Integrated Spatial and Object-Oriented Gis: Concepts and Statements
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper is concerned with how to measure and investigate changes in the recreational behaviour and the required recreational space in Polish seaside recreational areas in last few years. Spatial information is an integral part of the identification and analysis of recreational behaviour and required recreational space. We postulate, therefore, that spatial information should be fully incorporated in integrated object-oriented GIS and Decision Support Technology. We argue in this paper that the existing theoretical approaches with their descriptive and technical basis do not offer directions for its application and evaluation. They do not seek to explain the processes undergone by spatial information, nor define appropriate data models. New approaches to GIS use object-oriented structures and expert systems concepts, and they will become increasingly helpful in understanding GIS. It is not unreasonable to expect that the most important issue is to use a data model or object-oriented models which closely represent the user's concept of the geographic object for representing spatial phenomena. We have discovered that most Polish users in this field are unable to collect the data they require directly. Thus they have to use methods and techniques, which cannot be found in GIS such as SWOT analysis. According to our experiences, the identification and analysis of the recreational behaviour and the required recreational space should be defined as a system approach where: (i) recreational space requires an object, (ii) state of recreational space is defined by the set of values of recreational space features, and (iii) the utility of the recreational space is defined by a set of features. The identification and analysis of the recreational behaviour in the presented approach are based on the features/utilities matrix of the recreational space and the computer map. The development of such a system needs many organizational changes. It is shown that in many applications organizational rather than the technical aspects of GIS determine their future and open the way to new spatial analytical techniques.
series	DDSS
last changed	2003/08/07 16:36

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9447
id	ddss9447
authors	Jabi, Wassim
year	1994
title	An Outline of the Requirements for a Computer Supported Collaborative Design System
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of specific rules and grammars. Yet, there is a general consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still cannot support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. Thus, if CAAD is to ultimately benefit the design process, it must (1) emulate and support the design team approach to architectural problem solving and (2) be deployed in the earliest possible stages of the design process. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the interaction between a set of requirements (the building program) and the architectural solution that satisfies them (the schematic design). The core of this interaction forms the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modelling (based on the NIAM notation), object-oriented algorithms, and distributed agents. Based on a literature survey and earlier findings on the role of artifacts in collaborative design, this paper outlines the requirements for the above system and reports on initial experiments. Thus, it constitutes the first stage of a research project that will lead to a full implementation of a distributed collaborative computer environment addressing the above issues.
series	DDSS
type	normal paper
email
last changed	2008/06/12 16:32

_id	b9c4
authors	Kim, Inhan
year	1994
title	Data representations in an integrated architectural design environment
source	University of Strathclyde, Dept. of Architecture and Building Science
summary	The architectural design process is very complex and involves cross-disciplinary communication among many related fields. Given the further problems arising from the technological advances in building materials and construction methods, an integrated design environment becomes a central design issue. There have been many attempts to analyse and structure the design process as a uniform hierarchical framework. Most of the attempts resulted in a vague and inappropriate outcome due to the lack of understanding of architectural design complexity and inconsistent design data control sequence. A design problem cannot be comprehensively stated because the design problem has a multi-disciplinary nature and the design problem itself evolves as solutions are attempted by the designer. Therefore, an ideal CAAD system should have the capability to accommodate the multi-disciplinary nature of design and should not prescribe or restrict design concepts and design knowledge. A well designed integrated design environment provides more information and invokes creative imagination for each design stage, and therefore creative decision making by the designer can be achieved. This thesis proposes a prototype architectural design environment, Hybrid Integrated Design Environment [HIDE], which aims to integrate all applications for designing a building. Within the object-oriented design environment, a unified data model and a data management system have been implemented to seamlessly connect all applications. Development of the environment needs to consider the fundamental interaction between each module. Devising a data structure that is appropriate to an effective data communication among the various design stages is essential in a totally integrated CAAD system. The suggested unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. By means of the unified data model, integrated CAAD systems could represent and exchange design information at a semantic level, i.e. the user’s way of thinking, such as exchanging components and features of a building rather than graphical primitives. In consequence, the unified data model reduces the misunderstandings and communication problems among the multiple disciplines of architectural design. The suggested data management system supports the consistent and straight forward mechanisms for controlling the data representation through the inter-connected modules. It is responsible for creating, maintaining, and viewing a consistent database of the design description. It also helps to perform effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. To support inter-disciplinary communication of design concepts and decisions, the integrating of relevant CAAD tools is essential. In the environment, the integration of CAAD tools has been performed on the basis of how well computerized design tools can assist designers to develop better solutions, enabling them to manipulate and appraise varying solutions quickly and with a minimum of effort in an environment conducive to creative design. A well designed user interface system can also benefit the seamless working environment. The proposed user friendly interface system allows a user to explore the environment in a highly interactive manner. From the development of the early data model to the final design, a user could benefit from the prototypes and methods of the user interface system. The ultimate goal of the prototype environment is to suggest a future design environment which helps the architect to have minimum discontinuity in his creativity and make the design process similar to the natural design process with the help of a set of design assistance modules. A prototype version of HIDE has been implemented and a demonstration of the environment is part of this thesis.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	ddss9411
id	ddss9411
authors	Bouillé, Francois
year	1994
title	Mastering Urban Network Intersection And Superimposition, in an Object-oriented Knowledge System Integrating Rules, Neurons and Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many networks cover the urban texture, either superimposed at a variable distance, or really intersecting, or even in interconnection. We briefly recall the HBDS model, working on persistent abstract data types associated to graphical representations and carrying algorithms expressing conditions to be verified and/or actions to be performed. HBDS is an integrated system too, including database, expert system dealing with fuzzy rules and facts, discrete simulation engine, and neural engine; it has a general purpose programming language. Any urban network is associated to a given prototype, according to the same scheme named prototype with more specific components. These prototypes allow to build the different thematic structures instantiations of the prototypes. All possible cases of arc intersection or "pseudo-intersection" (simple superimposition)or interconnection are obtained by, owing to new prototypes. Moreover, such (pseudo)-intersections are automatically recognized and processed without a human intervention, owing to classes ofconstraints and classes of rules. They deal with particular constraints concerning the location of some urban furniture, and rules concerning the way a cable or a pipe must follow according to thepre-existing other networks in a given area, the minimal distances, minimal or maximal depths, and some required equipments. Urban classes of (pseudo-)intersections inserted in the hyperciass"neuron", inheriting of neural features, may be used for automated learning of urban knowledge; owing to their "behavior", these neurons can communicate and perform actions on other components. Urban classes inserted in the hyperciass "process" may be used for building very large models simulating complex urban phenomenons, thus allowing a better understanding of the real phenomenons. As a conclusion, we emphasize the methodological aspects of object-oriented integration for an efficient processing of the urban context, based on prototyping and mixing rules, neurons and processes.
series	DDSS
last changed	2003/08/07 16:36

_id	130d
authors	Hoinkes, R. and Mitchell, R.
year	1994
title	Playing with Time - Continuous Temporal Mapping Strategies for Interactive Environments
source	6th Canadian GIS Conference, (Ottawa Natura Resources Canada), pp. 318-329
summary	The growing acceptance of GIS technology has had far- reaching effects on many fields of research. The recent developments in the area of dynamic and temporal GIS open new possibilities within the realm of historical research where temporal relationship analysis is as important as spatial relationship analysis. While topological structures have had wide use in spatial GIS and have been the subject of most temporal GIS endeavours, the different demands of many of these temporally- oriented analytic processes questions the choice of the topological direction. In the fall of 1992 the Montreal Research Group (MRG) of the Canadian Centre for Architecture mounted an exhibition dealing with the development of the built environment in 18th- century Montreal. To aid in presenting the interpretive messages of their data, the MRG worked with the Centre for Landscape Research (CLR) to incorporate the interactive capabilities of the CLR's PolyTRIM research software with the MRG's data base to produce a research tool as well as a public- access interactive display. The interactive capabilities stemming from a real- time object- oriented structure provided an excellent environment for both researchers and the public to investigate the nature of temporal changes in such aspects as landuse, ethnicity, and fortifications of the 18th century city. This paper describes the need for interactive real- time GIS in such temporal analysis projects and the underlying need for object- oriented vs. topologically structured data access strategies to support them.
series	other
last changed	2003/04/23 15:14

_id	a43d
authors	Kim, Inhan
year	1994
title	Unified Data Organization and Management in an Integrated Design Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 254
summary	The architectural design process is very complex and it is not easily confined to a single design environment. As the design process gets more complex due to the technological advances in building materials and construction methods, an integrated design system becomes a central design issue. To have an integrated design system, all applications should be integrated in a unified environment within which there should be a data structure to facilitate an effective data communication among the various design stages and data control facility to seamlessly connect all these applications. A primary purpose of this work is to suggest an object oriented architectural design environment for the essential part of the seamless environment for designing a building. Within the object-oriented design environment, a unified data model and detailed data control module have been implemented to seamlessly connect all these applications. The unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. It also helps to do effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. The data management module supports the consistent and easy mechanisms in controlling the data representation through the inter-connected modules. It is also responsible for creating, maintaining, and viewing a consistent database of the design description. In the suggested design environment, each architectural element partially describes the model and individual elements are aggregated hierarchically. Some parts of the projection are defined and other can be inherited from above. Also, creation of an improved or new design element can easily be accommodated in the environment. The integrated database in the suggested environment is the basis by which design data can be shared among the design tools of the design environment. The database organizes the design description within each representation, correlates equivalent descriptions across the representations, and attempts to maintain these correspondences as the design incrementally evolves.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9459
id	ddss9459
authors	Langelaan, Willem
year	1994
title	Sequential and Concurrent Cad Layering
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Most CAD software allows graphical and text objects to be grouped into layers. There are two fundamentally different methods for layering: sequential layering and concurrent layering. With sequential layering, layers are attributes of the CAD database and objects are attributes of a layer. With concurrent layering, objects are attributes of the CAD database and a layer is an attribute of an object. Sequential layering emulates the pinbar drafting technique. As a result, it is output oriented. Only one layer at a time can be edited. Concurrent layering is uniquely a computer based layering method which has no manual equivalent. User specified sets of layers can be edited concurrently. It makes it possible to organize the infrastructure of the CAD database which equally facilitates input, i.e. editing design information, and output, i.e. presenting construction information on paper. Specification levels are related to design levels and to construction phases. Specification levels can serve as interfaces between input and output. In particular, a concurrently layered CAD database can be structured in layers which conform to specification levels. Furthermore, the layers can be subdivided by sub-system such as construction discipline, and by partial-system such as room finish schedules. It is demonstrated how a concurrently layered environment for computer aided design can be developed which permits deductive and inductive design activities. The appendix provides a detailed example of a concurrently layered CAD file with a default input and output environment of layers and layer groups. The environment was developed to coordinate the design and production activities of an architectural practice. The connections between layers and layer groups are illustrated in a 22 x 32 matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9480
id	ddss9480
authors	Schipper, Roel and Augenbroe, Godfried
year	1994
title	An Information Model of Energy Performance in Early Building Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design is a creative and dynamic process. The level to which a future generation of Intelligent Integrated Building Design Systems will be able to support this process depends on the power of the underlying conceptual models to cover the semantics of design. In the definition of generic building models, the concept of constraints appears to be a powerful means to formalize those semantics. Both design performance goals, and rules and relations in design composition can be described as constraints. The Engineering Data Model (EDM), recently developed at UCLA, acknowledges this fact. It allows the formal definition of object oriented building models, using constraints as the central concept for describing relations. This paper will discuss the development of an EDM building model for the integrated design for energy performance, and the implementa-tion of this model in a small prototype system. We will specifically deal with modelling informati-on in the early design stages. This information typically consists of multiple global design alternatives on one hand, and a wide range of conflicting design goals on the other hand. In the paper, it is demonstrated that integration of these conflicting views on building performance in one coherent model is the key to obtaining an optimal design result. Using the Dutch building codes for energy performance (NEN 2916) as an example of design goals, the concepts and relations of these building codes were translated to a formal EDM model. A small shell was built on top of this computer-interpretable model, to demonstrate the useability of the model during the solving of a concrete design problem. It is shown that the EDM building model is able to provide the designer with integrated information through combining different sets of performance constraints and design alternatives in one environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	cd68
authors	Szalapaj, Peter J. and Tang, Songlan
year	1994
title	Giving Colour to Contextual Hypermedia
doi	https://doi.org/10.52842/conf.ecaade.1994.191
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 191-200
summary	Design development evolves within design contexts that require expression as much as the design itself, and these contexts often constrain any presentation in ways that are not usually explicitly thought of. The context of a design object will therefore influence the conceptual ways of thinking about and presenting this object. Support in hypermedia applications for the expression of the colour context, therefore, should be based upon sound theoretical principles to ensure the effective communication of design ideas. Johannes Itten has postulated seven ways to communicate visual information by means of colour contrast effects, each of which is unique in character, artistic value, and symbolic effect. Of these seven contrasting effects, three are in terms of the nature of colour itself: hue, brightness, and saturation. Although conventional computer graphics applications support the application of these colour properties to discrete shapes, they give no analysis of contrasting colour relationships between shapes. The proposed system attempts to overcome this deficiency. The remaining four contrast effects concern human psychology and psychophysics, and are not supported at all in computer graphics applications. These include the cold-warm contrast, simultaneous contrast, complementary contrast, and the contrast of extension. Although contrast effects are divided into the above seven aspects, they are also related to one another. Thus, when the hue contrast works, the light-dark contrast and cold-warm contrast must work at the same time. Computational support for these colour effects form the focus of this paper.
series	eCAADe
last changed	2022/06/07 07:56

_id	95b3
authors	Wernecke, J.
year	1994
title	The Inventor Mentor: programming Object-oriented 3D graphics with Open Inventor
source	Release 2 Addison Wesley
summary	The Inventor Mentor introduces graphics programmers and application developers to Open Inventor, an object-oriented 3D toolkit. Open Inventor is a library of objects and methods used for interactive 3D graphics. Although it is written in C++, Open Inventor also includes C bindings. For the sake of brevity, the examples included in this book are in C++. All C++ examples, as well as equivalent examples written in C, are available on-line. If you are new to the C++ language, see Appendix A, "An Introduction to Object-Oriented Programming for C Programmers," to help you understand the references to classes, subclasses, and other object-oriented concepts used throughout this book. If you are using the C application programming interface, also see Appendix B, "An Introduction to the C API." This book describes how to write applications using the Open Inventor toolkit. The Inventor Toolmaker, a companion book for the advanced programmer, describes how to create new Inventor classes and how to customize existing classes. The Inventor Mentor contains the following chapters: * Chapter 1, "Overview," provides a general description of Open Inventor concepts and classes and how Inventor relates to OpenGL and the X Window System. * Chapter 2, "An Inventor Sampler," presents a short program that creates a simple object. This program is then modified to show the use of important Inventor objects: engines, manipulators, and components. * Chapter 3, "Nodes and Groups," introduces the concept of a scene graph and shows how to create nodes and combine them into different kinds of groups. * Chapter 4, "Cameras and Lights," describes the camera nodes used to view a scene and the light nodes that provide illumination. * Chapter 5, "Shapes, Properties, and Binding," describes how to create both simple and complex shapes and how to use property nodes, including material, draw style, and lighting model nodes. Binding materials and surface normals to shape nodes is also explained. * Chapter 6, "Text," shows the use of 2D and 3D text nodes. * Chapter 7, "Textures," describes how to apply textures to the surfaces of objects in a scene. * Chapter 8, "Curves and Surfaces," explains how to use NURBS curves and surfaces. * Chapter 9, "Applying Actions," describes how operations are applied to an Inventor scene graph. Actions include OpenGL rendering, picking, calculating a bounding box, calculating a transformation matrix, writing to a file, and searching the scene graph for certain types of nodes. * Chapter 10, "Handling Events and Selection," explains how Inventor receives events from the window system. It also describes how the selection node manages a selection list and performs highlighting. * Chapter 11, "File Format," describes Inventor's interchange file format, used for reading files into Inventor, writing files out from Inventor, and data exchanges such as copy and paste. * Chapter 12, "Sensors," describes how Inventor sensors watch for certain types of events and invoke user-supplied callback functions when these events occur. * Chapter 13, "Engines," describes how you can use Inventor engines to animate parts of a scene graph, or to create interdependencies among the nodes in the graph. * Chapter 14, "Node Kits," introduces node kits, a convenient mechanism for creating groups of related Inventor nodes. Each node kit contains a catalog of nodes from which you select the desired nodes. * Chapter 15, "Draggers and Manipulators," describes how to use draggers and manipulators, which are special objects in the scene graph that respond to user events. Manipulators are nodes with field values that can be edited directly by the user. * Chapter 16, "Inventor Component Library," shows how to use Inventor's Xt components, which are program modules with a built-in user interface for changing the scene graph interactively. It also Chapter 17, "Using Inventor with OpenGL," discusses how to use Inventor with the OpenGL Library.
series	other
last changed	2003/04/23 15:14

_id	e751
id	e751
authors	Clayton, M.J., Kunz, J.C., Fischer, M.A. and Teicholz, P.
year	1994
title	First Drawings, Then Semantics
doi	https://doi.org/10.52842/conf.acadia.1994.013
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 13-26
summary	The Semantic Modeling Extension (SME) prototype implements a unique approach to integrated architectural CAD that places the drawing act first in the design process. After drawing a design idea using a computer graphic system, the designer interprets the design, providing semantic content to the graphic entities. An interpretation expresses the meaning of the design with respect to a particular issue, such as structural sufficiency, energy consumption, or requirements for egress, and provides reasoning to evaluate the design addressing that issue. A design may have many interpretations to express the multiple issues that are relevant in a design project. The designer may add or delete interpretations of the design as issues change during the course of the project. Underlying the SME prototype are the concepts of form, function and behavior. In the prototype, evaluation of a design is done by deriving behavior from the graphically represented forms and relating the behavior to stated functions or requirements. The concepts of interpretations and form, function and behavior together establish a virtual product model for design. In contrast to component based approaches to product modeling that tightly bind form representations to their behavior and function, a virtual product model allows the designer to manipulate the relations among these three descriptors of a design, and thus manipulate the semantics of the design entities. By distinguishing between the act of proposing a design by drawing the conceived form and the act of assigning meaning to the form, the virtual product model approach supports both graphic thinking for design synthesis and symbolic reasoning for design evaluation. This paper presents a scenario of the use of the SME prototype in building design; provides an analysis of the design process and computational support described in the scenario; contrasts a virtual product model approach with a component-oriented product model approach; describes the software implementation of SME; and presents implications and conclusions regarding design process and technical integration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddss9425
id	ddss9425
authors	Deguchi, Atsushi and Hagishima, Satoshi
year	1994
title	Integration System for Urban Design from Planning Management to Visalization
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Advanced tools based on CAD or GIS systems and simulation methods have recently been introduced to support the many aspects of urban planning (design, analysis, evaluation, presentation). This research aims at constructing a system by integrating these support tools and linking GIS and simulation tools. The major purpose of this system are to manage the geographical data base of the target urban area, utilize the digital information of the area for planning and analysis,evaluate the impact of alternative proposals on the physical environment such as sunlight and daylight, visualize the results of analysis, and support the management of urban redevelopment /development projects. This paper shows some applications to illustrate usefulness of the system. These examples are concerned with a contemporary problem in urban planning of Tokyo: redevelopment of low-rise high-density residential districts and high-rise development in the central business districts. Urban redevelopment for the high-density urban areas in Japan requiresa evaluation of alternative plans by visualizing their environmental impact. This system enables the quantitative analysis of the environmental impact by using 3-dimensional geographical data andsimulation methods. In general, the merit and effect of planning support systems are recognized in terms of the "efficiency" of the planning process. The primary function of GIS is thought to bethe unification and management of various pieces of information. In addition, this research indicates the effectiveness of the integrated system in terms of utilizing the geographical information and visualizing the image of the future environment.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9427
id	ddss9427
authors	Engelen, Guy and White, Roger
year	1994
title	A Strategic Planning and Policy Decision Support Tool for Urban Regions
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper we present a Decision Support System developed to assist urban designers, planners and policy makers to explore and evaluate possible urban layouts and their growth patterns. Thecore of the system consists of a modelling shell allowing the user to specify cellular automata based models of urban and regional systems. These models capture the effect of local spatial processes in which the use, or desired use of each parcel or cell of land is determined partly by institutional and environmental factors, and partly by the activities present in its neighbourhood. Since each cell affects every other cell within its neighbourhood, a complex dynamic emerges. Unlike conventional cellular automata, the models are defined with a large neighbourhood --over a hundred cells-- a relatively large number of states --more than a dozen in some applications-- representing socio-economic and natural land-uses. The approach permits the straightforward integration of detailed physical, environmental, and institutional constraints, as well as including the effects of the transportation and communication infrastructure. These models thus permit a very detailed representation of evolving spatial systems. The current version of the system represents urban areas as consisting of up to 10.000 interacting zones, each roughly the size of an individual city block. These models are easy to build and apply, yet empirical tests show that they produce realistic simulations of urban land use dynamics. Consequently, they are well suited to form the heart of the DSS, which provides the user with a number of tools for exploration,analysis and evaluation of alternative futures of the system as they result from policy interventions that are imposed by means of what-if experiments and scenario analysis. For example, the DSS isable to identify areas in which pressure for change in land use restrictions may become critical under particular development strategies. In the DSS, the modelling shell is coupled to a simple,custom-built GIS. In the stand-alone application of the DSS, this stores the detailed geographical qualities of the area being modelled, and allows basic overlay manipulations. It also displays theresults of the model while the simulation proceeds. Alternatively, the GIS can serve as aninterface to more elaborate, commercial GIS systems.
series	DDSS
email
last changed	2003/08/07 16:36

_id	e933
authors	Herbert, Daniel M.
year	1994
title	A Critical Analysis of Design Processes and Media: Applications for Computer-Aided Design
doi	https://doi.org/10.52842/conf.acadia.1994.133
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 133-146
summary	Architectural designers take part in two complex cultures: a parent culture that affects their overall view of the world, and an architectural subculture that orders the details of their work. With assistance from writings in contemporary philosophy, this paper analyzes aspects of both the parent culture and the subculture as they concern design processes and media. The analysis uncovers assumptions that normally assign such processes and media to a secondary role in which they to a secondary role in which they serve only as neutral and transparent skills. By constructing a set of alternative assumptions, the paper proposes a new, primary, role for design processes and media - a role that enables them to act as intentional and substantial generators of form. These alternative assumptions challenge deeply held beliefs, but examples show that when they are employed experimentally in computer-aided design, they reveal new possibilities unique to digital processes and media.
series	ACADIA
last changed	2022/06/07 07:49

_id	ddss9464
id	ddss9464
authors	McCartney, Kevin and Ismail, Ashraf Lotfy R. M.
year	1994
title	A Tool for Conceptual Design Evaluation Based on Compliance with Supplementary Planning Guidance and Local Planning Policies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are being designed in order to check design compliance with the requirements of local planning authorities; with regards to building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. The measures to determine proper evaluation will be based upon site-development briefs, and design guides produced by the local planning authorities. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. It will also provide many functions for editing two and three dimensional drawings specifically for the environmental analysis tasks. In addition to the common graphical output of Aut0CAD; i.e. plans, elevations and three dimensional models, the tool will generate textual analysis of the design in report format to use as part of the Environmental Impact Statement of proposed development. The speculative tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out tailor-made for architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of materials for environmental statements. Second, field observation will be carried out to observe the concerned professionals as decision-makers while assessing building design proposals. A prototype will be designed and then tested against the expectations of the tool designer, then the tool performance will be evaluated by a team of professionals participated in the field studies. A critical analysis of the prototype design methodology and the concluding study findings will be documented as part of a postgraduate research thesis to be completed in June 1995.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9473
id	ddss9473
authors	Peckham, Robert J.
year	1994
title	Geographical Information Systems and Decision Support for Envi-ronmental Management
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The growing requirement for spatial decision support systems in Urban and Regional Management is pointed out. This has come about due to the increasing complexity of modern human activities, the increase in awareness of the negative consequences of mankind's technological development on the environment, and also due to the need to respect new regulations and legislation regarding environmental impacts. Such spatial decision support systems need to manipulate and analyze a wide variety of spatially referenced information, frequently in large quantities. Geographical Information Systems are now the chosen means for supporting such information, but in order to arrive at decisions further analysis modules and decision aids frequently need to be linked to them, or integrated with them. Linking multicriteria decision aid with spatial analysis is one way in which spatially referenced information can be used to arrive at decisions in situations where there are many and conflicting criteria. Examples of applications of these ideas to real management problems, including waste management, river management and site management are used to show how spatial information can now be manipulated to aid decisions, and to arrive at some of the design requirements for more flexible and applicable decision support systems. The merits and disadvantages of several different approaches to design and implementation of decision support systems, especially from the users point of view, are discussed.
series	DDSS
email
last changed	2003/08/07 16:36

_id	79f8
authors	Rieber, L.
year	1994
title	Computers Graphics, and Learning
source	Brown & Benchmark, Madison
summary	The first of the topics begins with an overview of instructional computer graphics. This leads into an overview of the status of instructional visual research including discussions on visual perception, visual cognition, and theories on storing visual information in short-term and long-term memory. More practical application information is found in the next few chapters covering when and how static and animated graphics should be integrated into computer based instruction. The book concludes with a consideration of the role visuals play with multimedia. The useful information of each chapter is delivered with a cautious and wise nature. Rieber introduces his book with the first principle of instructional graphics, which I found to be very insightful. It reads, "There are times when pictures can aid learning, times when pictures do not aid learning but do no harm, and times when pictures do not aid learning and are distracting." The general premise throughout the book is that learning is paramount and should take center stage. He further warns the instructional designer about becoming "technocentric" (this is where technology dictates decision making) and recommends that media decisions not be made untilother instructional decisions are made. Again and again, from chapter to chapter, the reader is reminded of this underlying premise which made this book particularly effective. Another strength was the comprehensive nature of the book. There was an excellent balance of theory, research, and application to ensure the reader will gain the knowledge for appropriate integration of graphics into instructional materials. The theoretical information covers the role of visuals in communication and education, quoting many research sources for validation. There is an overview of three types of instructional graphics (representational, analogical, and arbitrary) and an analysis of their possible use in Gagneís domains of learning. Rieber states that the design of instructional graphics is strongly influenced by the inter-relationships and interdependency of the five domains. To help the reader choose the correct graphic for the job intended, a section describing the five applications of instructional graphics (cosmetic, motivation, attention-gaining, presentation, and practice) is included. It is recognized that these applications originated from Gagne's nine events of instruction.
series	other
last changed	2003/04/23 15:14

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

For more results click below: