Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 363

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9402
id	ddss9402
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1994
title	Design of a View-Based DSS For Location Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the design of a DSS for locating facility networks. The proposed DSS is based on the principle of dynamic data definitions. The declarative and procedural forms of knowledge involved are identified by a logical analysis of planning tasks. The DSS supports an iterating process of adjusting and evaluating plan options. A flexible and interactive problem solving environment is achieved by means of a user defined set of views that captures both forms of knowledge. Each view describes the system to be planned in terms of a set of variables and attached evaluation procedures. The views are dynamic and linked data structures, so that changes in one view automatically lead to updating all linked views. The DSS supports both the specification of the set of views and its application to solve a specific location problem.
series	DDSS
email
last changed	2003/08/07 16:36

_id	cc19
authors	Glennie, William L.
year	1994
title	Europe '94 - A Visitor's Report on the State of CAAD in Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 262
doi	https://doi.org/10.52842/conf.ecaade.1994.x.s5h
summary	During May, June and July of this year, I had the pleasure of visiting twelve institutions across Europe where computers are being used in the teaching of Architecture. There are as many different approaches to the incorporation of computers in the curriculum as there are places, and they all have some degree of success. My greatest surprise was the large size of these Schools, even in relatively small countries. Dealing with a huge number of students makes any kind of mandatory computer instruction almost impossible. In spite of all difficulties, enthusiasm and willingness to work directly with students was the single most important characteristic in the faculty and staff who are having the greatest success. Support staff dedicated to the maintenance of equipment and software were provided at most of the institutions. For those who do not have this benefit it is critical to relieve the teaching and research faculty of the need for these time-consuming tasks. Formal research activities are not essential to effective education. The process of setting up such efforts is again a distraction from the more important job of teaching. If research projects grow naturally out of the curriculum, they may be pursued without impeding instruction. Most serious of all, there is a substantial lack of communication and cooperation among these schools, and by implication, among all of the other schools in Europe. The mechanism of annual conferences held by ECAADE is insufficient to exchange information and interests. There were several occasions when I mentioned work that was being carried out at one place that would match very nicely with efforts at another. However, it is clearly impossible for any one school to spearhead this kind of collection and coordination of activities. The only appropriate organisation for this kind of exchange would be a centralised service initiated and maintained by the European Community. It is very important that such a body does not attempt to limit or direct the work of individual schools, rather simply serves as a clearinghouse through which the various groups can benefit from each other's work, to the mutual benefit of all.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9408
id	ddss9408
authors	Bax, Thijs and Trum, Henk
year	1994
title	A Taxonomy of Architecture: Core of a Theory of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The authors developed a taxonomy of concepts in architectural design. It was accepted by the Advisory Committee for education in the field of architecture, a committee advising the European Commission and Member States, as a reference for their task to harmonize architectural education in Europe. The taxonomy is based on Domain theory, a theory developed by the authors, based on General Systems Theory and the notion of structure according to French Structuralism, takes a participatory viewpoint for the integration of knowledge and interests by parties in the architectural design process. The paper discusses recent developments of the taxonomy, firstly as a result of a confrontation with similar endeavours to structure the field of architectural design, secondly as a result of applications of education and architectural design practice, and thirdly as a result of theapplication of some views derived from the philosophical work from Charles Benjamin Peirce. Developments concern the structural form of the taxonomy comprising basic concepts and levelbound scale concepts, and the specification of the content of the fields which these concepts represent. The confrontation with similar endeavours concerns mainly the work of an ARCUK workingparty, chaired by Tom Marcus, based on the European Directive from 1985. The application concerns experiences with a taxonomy-based enquiry in order to represent the profile of educational programmes of schools and faculties of architecture in Europe in qualitative and quantitative terms. This enquiry was carried out in order to achieve a basis for comparison and judgement, and a basis for future guidelines including quantitative aspects. Views of Peirce, more specifically his views on triarchy as a way of ordering and structuring processes of thinking,provide keys for a re-definition of concepts as building stones of the taxonomy in terms of the form-function-process-triad, which strengthens the coherence of the taxonomy, allowing for a more regular representation in the form of a hierarchical ordered matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss9416
id	ddss9416
authors	Campbell, Noel and O'Reilly, Thomas
year	1994
title	GIS: Science or Tool - The Built Environment Perspective
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper attempts to locate GIS in the context of the built environment professions, rather than in the context of computer science, recognizing the integrated but limiting approach of viewingGIS from a strictly computer / spatial science perspective. The paper reviews the conflicts and tensions appearing in the GIS debate seeing them as reflecting the differences between the perceptions and interests of software developers and those of the professions. The "spatial science versus professional tool" dilemma is therefore critically assessed. Science is identified as the dominant paradigm within which GIS development has taken place. This encompasses the emphasis on GIS as spatial science; the interest in particular forms of spatial analysis; a narrow approach to the idea of information; the debate about the appropriate emphasis on the location for GIS in undergraduate education. The interests and activities of the professions cannot be encompassed within the pre-existing science paradigm. The paper identifies the interest the professions have had in broad geographical issues (as distinct from narrow spatial issues). It recognizes the different conventions and procedures used in recording and using geographical information, not all of them objective or scientific. It views the computer, not as a "scientific engine", but as a modern medium for representing and analyzing information. This includes storage and analysis, both internally (algorithmic manipulation) and outside (qualitative manipulation, beyond formal -"computer"- logic). This approach suggests a framework for research of a nature more sympathetic to the needs of the built environment professions in particular and an agenda which would include an examination of: (i) the conventions and procedures used in the professions to collect, store and process information and how these translate to computer technology; (ii) the types of software used and the way procedures may be accommodated by combining and integrating packages; (iii) the dynamism of GIS development (terms such as "dedicated", "mainframe", "PC-based", "distributed", "pseudo-", etc. are identified as indicativeof the need for professions-based approaches to GIS development); (iv) a critique of "information" (modelling of information flows within the professions, may yield valuable insights into the (modelling of information flows within the professions , may yield valuable insights into the similarity of requirements for a variety of "workplace scenarios").
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9417
id	ddss9417
authors	Chan, Chiu-Shui
year	1994
title	A Hypermedia Tutoring for Multimedia Tasks
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Using a computer or a software package involves procedural knowledge, or knowledge of a series of instructions. When a user recognizes the appropriate computer commands (the method) in acertain application, it is assumed that the user is capable of doing a computer-related or computeraided task. Based on this assumption, the current project explores methods of developing a computer tutoring system to convey know-how efficiently. The purpose of the project is to make novices familiar with machines and with techniques of handling multimedia for presenting design concepts. A teaching tool is designed that combines images, sounds, and movements to create an effective learning environment. The tool is a hypermedia system consisting of different software and hardware components implemented in the HyperCard. How to manipulate different media will be taught by means of cross-references, graphic display, text explanations, and background music. Hopefully, this project will suggest some useful methods for teaching CAD to novice computer users.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9422
id	ddss9422
authors	Daru, Roel and Snijder, Philip
year	1994
title	Sketch-Trigger: A Specification for a Form Generator and Design Analysis Toolbox for Architectural Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In order to develop design and decision support techniques in the early sketch design phases, weshould (1) experience and (2) observe real behaviour in practice, (3) transform observations intoideas for improvement, (4) develop behaviour models to explain the sketch design activities and(5) to evaluate between the proposals, (6) decide between the alternatives, (7) implement theselected option in a supporting tool. Our paper reports about the results of step 3 in particular inthe first phase of a Ph D project, started this year. Our main objective is to amplify the effects ofthe sketch as a very effective instrument to generate original forms and to stimulate the mind to discover new shapes and meanings in the roughly sketched patterns. Instead of considering the sketch only as a representation of what the designer has in mind as is usually assumed in CAD systems, we see sketching as form activation. Thus, we want also to offer triggering images to spark off the imagination of the designer while generating images which are practically impossibleto create by hand and certainly not at short notice. The main improvement proposed is the use of an evolutionary form breeding system: one or more sketched parent images (either ready-made'partis' or basic schemes drafted by the designer) presented in the centre of the screen, will generate surrounding mutated children as defined at random but constrained by default or customization of the available transformations. By selecting one or more children a next generation will be produced in the same way. At all times the designer can introduce or reduce constraints. To complete the usually offered 'classical' symmetrical, spatial and logical operations,we want to introduce dis-functional operations like dislocation, explosion, deformation, anti-logic etc, in short all kinds of antagonistic operations, among them the transformations applied indeconstructionist and post-modern design. Our expectation is that these operations will correspond roughly to the 'move' pertaining to a design entity as the operational unit most appropriate for design behaviour research, in particular the analysis of the chunking and parsing behaviour of the designer. The applicability of the 'move' approach has been shown experimentally by Habraken and others. Goldschmidt has abandoned the usual typology approach of protocolanalysis based on moves and concentrated on the linking of moves, but has been hampered by the lack of a good representational instrument. This brings us to the representation of moves and linkages as a research instrument. The 'linkograph' approach as proposed by Goldschmidt is a first step towards a graphical representation of the designers associative reasoning mode, necessary for tracking the heuristics of designers at the most basic level, but its practical implementation remained as yet incredibly laborious. What is proposed here is an instrument and approach which makes such registration and analysis possible within a structured software environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ddss9434
id	ddss9434
authors	Grant, M.
year	1994
title	Urban Gis - The Application of the Information Technologies to Urban Management
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many cities in the UK and indeed throughout the developed world are characterised by the all too familiar symptoms of urban blight caused by insensitive intervention in the environment. The common denominator within this class of problem is the lack of a coordinated, integrated approach to the planning, design and maintenance of our cities. The cycle of development and redevelopment calls for input from a diverse range of disciplines relating to architecture, civilengineering, transport engineering, and the management of city utilities. This lack of a common up datable information base renders access to a global view of the city difficult, if not impossible.This problem has provided the motivation to move towards an integrated philosophy regarding information collection, collation and dissemination. The impetus is provided primarily through theincreasing complexity of urban management but also through central governments policy to progress towards decentralisation of services. Fiscal pressure to increase efficiency, lower manpower resources and arrive at speedier judgements all point to an increasing reliance on the information technologies. Current work at ABACUS within Strathclyde University addresses research whose objective is to identify, and then prototype, a relevant urban information system. It is proposed that by attributing a geometrical framework with those physical quantities thatare relevant to the formal and functional evaluation of the urban environment, the means of evaluating the qualities and quantities of the buildings aswell as the social and economic prospects may be realised.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9437
id	ddss9437
authors	Gu, Jing-wen and Chen, Bing-zhao
year	1994
title	Data Structure and Its Processing in Planar Road Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The planning of roads is one of the most important activities in urban planning and design. Even at the early stage of planning, a planner must take the roads and their planar layout into account and should design them as soon as possible. Then he can use the roads as building blocks for further planning, such as land use, underground layout, detailed district planning and road design. In conventional manual design procedures and according to the "Norm of Transport Planning onUrban Road", it is a tedious task to draw property and side lines of the road network in a city or district and to link them properly at road crosses. With the help of computers, it will be possible to do it automatically. In this paper, the data structure we constructed for our PC software for road processing is first introduced. This data structure defines the road level, the widths of side and property lines, the orientation and topological link of one road with other roads. The procedural considerations for road processing are then given. They include the generation of the side lines and property lines, smooth linking between adjacent roads, rounding of arc roadsegments and all of the physical coordinates for the control points on both centre-lines and property lines. When using this system, a planner only needs to input the centre lines of roads and their width. The roads can be either inputted by using a digitizer or directly sketched on the display. The subsequent processing mentioned above is completed automatically, and the resulting geometric data associated with the road network is stored in a database with the same data structure. The specification on the road cross, which is required during the processing, can be changed interactively and globally, and once changed the regeneration of the above process will be finished very fast.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9446
id	ddss9446
authors	Horgen, Turid
year	1994
title	Post Occupancy Evaluation as a Strategy to Develop an Improved Work Environment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	A post-occupancy evaluation is a formal way of finding out whether a recently occupied, remodelled, or built environment is performing, as was intended in its programming or design, and a term which has been developed in the professional field in the United States over the last 20 years. The Scandinavian approach to the same question has emphasised surfacing the values of the users of the work environment as a tool for a more comprehensive approach to space planning and design. A recent case-study of the Taubman Building at Harvard University's John F. Kennedy School of Government was aimed at blending the two strategies for evaluation, defined postoccupancy evaluation as a dialogue with the client, as a process to help the client reflect on spatial and technological improvements, or alternate strategies for organisational locations in buildings, and offers an interesting example of a possible future direction for POE's. Sheila Sheridan, Director of Facilities and Services at the Kennedy School, commissioned the case-study, and has been using it result in her daily work. Jacqueline Vischer, who has developed a survey of seven key dimensions of work-place comfort for commercial office buildings throughout eastern North America, and Turid Horgen, who has developed tools for participatory environmental evaluation and programming, widely used in Scandinavia, carried out the study and facilitated the evaluation process. The study is also done in the context of the ongoing research on these issues in the design Inquiry Group at the School of Architecture and Planning at MIT, which is involved in a larger program for developing strategies and tools for more effective programming and management of corporate space. This research defines the workplace environment as the interaction between four dimensions: space, technology, organisation and finance. Our approach is to integrate programming and evaluation with organisational planning and organisational transformation.Post occupancy evaluation is seen as a way to inform the client about his organisational culture as he manages the fit between a facility and its uses, and as one of several tools to bridge the frameworks and viewpoints and the many "languages" which are brought into the decision making process of designing the built environment.
series	DDSS
last changed	2003/08/07 16:36

_id	8822
authors	Jakimowicz, Adam
year	1994
title	Abstract Modelling - Forming and Exploring
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 214
doi	https://doi.org/10.52842/conf.ecaade.1994.x.o5l
summary	Architectural design is always concerned with form to things. It is the sphere or action where meanings are to be expressed and further on - received (by a receiver), felt, understood. "Meanings" mean not only rational information. The matter is to reach the essence and to master ways appropriate to expose and interprete it. Quality of the form decides whether architectural or any work is worth attention or not and to what degree. Form is an attribute of a thing. It is form that "speaks". This linguistic metaphore shows one of natural, inborn features of things and states. However, questions appear: 1. Does everything have form? 2. Is the form an objective term? 3. What limitations of the definition of the form to accept- if any? The friendly environment for creating form consists of conscious intentions plus open mind. Rules are certain, but liquid. Every formal communication system may be widened individually. The only limitation is to be received according to intentions. So, incredibly, the infinite number of combinations, even within one system, may be possible.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	26a5
authors	Kokosalakis, Jen
year	1994
title	Recent Developments Using ArchiCAD in Education: LJMU experience
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 224
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u2t
summary	The teaching forum : Based on the CAD Suite for Division of Arts & Professional Studies Emphasis here is on teaching of formal class groups, demos from the Mac with OHP interface display panel usually with DTP hand outs, programmed in with project themes. eg. Attributes of materials - rendering transparency, reflection & shadow casting features timed for the Clay and Glass Design project. CONS - More able students tend to be held up by the slower ones. Some students rush ahead using the hand outs and get out of sync with the rest.
series	eCAADe
last changed	2022/06/07 07:50

_id	ab3c
authors	Kramer, G.
year	1996
title	Mapping a Single Data Stream to Multiple Auditory Variables: A Subjective Approach to Creating a Compelling Design
source	Proceedings of the Third International Conferenceon Auditory Display, Santa FO Institute
summary	Representing a single data variable changing in time via sonification, or using that data to control a sound in some way appears to be a simple problem but actually involves a significant degree of subjectivity. This paper is a response to my own focus on specific sonification tasks (Kramer 1990, 1993) (Fitch & Kramer, 1994), on broad theoretical concerns in auditory display (Kramer 1994a, 1994b, 1995), and on the representation of high-dimensional data sets (Kramer 1991a & Kramer & Ellison, 1991b). The design focus of this paper is partly a response to the others who, like myself, have primarily employed single fundamental acoustic variables such as pitch or loudness to represent single data streams. These simple representations have framed three challenges: Behavioral and Cognitive Science-Can sonifications created with complex sounds changing simultaneously in several dimensions facilitate the formation of a stronger internal auditory image, or audiation, than would be produced by simpler sonifications? Human Factors and Applications-Would such a stronger internal image of the data prove to be more useful from the standpoint of conveying information? Technology and Design-How might these richer displays be constructed? This final question serves as a starting point for this paper. After years of cautious sonification research I wanted to explore the creation of more interesting and compelling representations.
series	other
last changed	2003/04/23 15:50

_id	ddss9459
id	ddss9459
authors	Langelaan, Willem
year	1994
title	Sequential and Concurrent Cad Layering
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Most CAD software allows graphical and text objects to be grouped into layers. There are two fundamentally different methods for layering: sequential layering and concurrent layering. With sequential layering, layers are attributes of the CAD database and objects are attributes of a layer. With concurrent layering, objects are attributes of the CAD database and a layer is an attribute of an object. Sequential layering emulates the pinbar drafting technique. As a result, it is output oriented. Only one layer at a time can be edited. Concurrent layering is uniquely a computer based layering method which has no manual equivalent. User specified sets of layers can be edited concurrently. It makes it possible to organize the infrastructure of the CAD database which equally facilitates input, i.e. editing design information, and output, i.e. presenting construction information on paper. Specification levels are related to design levels and to construction phases. Specification levels can serve as interfaces between input and output. In particular, a concurrently layered CAD database can be structured in layers which conform to specification levels. Furthermore, the layers can be subdivided by sub-system such as construction discipline, and by partial-system such as room finish schedules. It is demonstrated how a concurrently layered environment for computer aided design can be developed which permits deductive and inductive design activities. The appendix provides a detailed example of a concurrently layered CAD file with a default input and output environment of layers and layer groups. The environment was developed to coordinate the design and production activities of an architectural practice. The connections between layers and layer groups are illustrated in a 22 x 32 matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	c7ce
authors	Lentz, Uffe
year	1994
title	Interface
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 24-28
doi	https://doi.org/10.52842/conf.ecaade.1994.024
summary	Todays high tech products don't expose their content or way of peration by their form. Interface design is a new disciplin that deals with the problem of how to explain the operation and potential of an object to the user. The paper discusses interface design and argues that it will become an important extension of the architects traditional tasks.
series	eCAADe
last changed	2022/06/07 07:52

_id	ga0009
id	ga0009
authors	Lewis, Matthew
year	2000
title	Aesthetic Evolutionary Design with Data Flow Networks
source	International Conference on Generative Art
summary	For a little over a decade, software has been created which allows for the design of visual content by aesthetic evolutionary design (AED) [3]. The great majority of these AED systems involve custom software intended for breeding entities within one fairly narrow problem domain, e.g., certain classes of buildings, cars, images, etc. [5]. Only a very few generic AED systems have been attempted, and extending them to a new design problem domain can require a significant amount of custom software development [6][8]. High end computer graphics software packages have in recent years become sufficiently robust to allow for flexible specification and construction of high level procedural models. These packages also provide extensibility, allowing for the creation of new software tools. One component of these systems which enables rapid development of new generative models and tools is the visual data flow network [1][2][7]. One of the first CG packages to employ this paradigm was Houdini. A system constructed within Houdini which allows for very fast generic specification of evolvable parametric prototypes is described [4]. The real-time nature of the software, when combined with the interlocking data networks, allows not only for vertical ancestor/child populations within the design space to be explored, but also allows for fast "horizontal" exploration of the potential population surface. Several example problem domains will be presented and discussed. References: [1] Alias \| Wavefront. Maya. 2000, http://www.aliaswavefront.com [2] Avid. SOFTIMAGE. 2000, http://www.softimage.com [3] Bentley, Peter J. Evolutionary Design by Computers. Morgan Kaufmann, 1999. [4] Lewis, Matthew. "Metavolve Home Page". 2000, http://www.cgrg.ohio-state.edu/~mlewis/AED/Metavolve/ [5] Lewis, Matthew. "Visual Aesthetic Evolutionary Design Links". 2000, http://www.cgrg.ohio-state.edu/~mlewis/aed.html [6] Rowley, Timothy. "A Toolkit for Visual Genetic Programming". Technical Report GCG-74, The Geometry Center, University of Minnesota, 1994. [7] Side Effects Software. Houdini. 2000, http://www.sidefx.com [8] Todd, Stephen and William Latham. "The Mutation and Growth of Art by Computers" in Evolutionary Design by Computers, Peter Bentley ed., pp. 221-250, Chapter 9, Morgan Kaufmann, 1999.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: