Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 333

Reformat results as: short short into frame detailed detailed into frame

_id	0574
authors	Alison Murison and James Gray
year	1994
title	Spatial Analysis for Museum Design
doi	https://doi.org/10.52842/conf.ecaade.1994.201
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 201-206
summary	The paper describes how a specially written customisation of AutoCAD enables students of Architecture to use the method of spatial analysis called Space Syntax developed by Professor Bill Hillier of the Bartlett School of Architecture, London, to examine a number of existing museums, to compare the findings against other criteria, and to draw conclusions about the strategy adopted in museum design. Simple interactive graphics enable plans to be entered and compared, so that they may be evaluated during the design process, with decisions supported by objective tests. This improves both design decisions and the learning process.
series	eCAADe
last changed	2022/06/07 07:54

_id	ca51
authors	Asanowicz, Aleksander
year	1994
title	CAFE: Composition for Architects - Forms and Emotions
doi	https://doi.org/10.52842/conf.ecaade.1994.x.l3s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 249
summary	In the architectural creation process there has always been an inclination to improve the methods of designing in the way of ,,objectivization" of designing process. Objectivization which would explain why we do design in this way and not the other. In spite of the trend to the total objectivization (Vitruvius, Alberti, Palladio), the results appeared to be still subjective, i.e. they included methods of designing typical of the one and only architect. This fact made them completely useless in the designing practice. On the other hand one cannot underestimate their meaning as to this very practice. Because it is just thanks to them that the development of designing studies has taken place. We do learn not only watching works of great architects, but also studying their opinions concerning problems of form, function and construction. That is why it seems to be useful to collect experiences concerning the classic theory of architectural composition, which have been gathered through centuries, as well as to try once again to objectivize the process. Composition information arranged in the form of data-base would create the ground for proper functioning of an expert system uniting diagnostic and planning functions. Study of that kind, not claiming design applications could be an excellent educational equipment in teaching architectural composition. In the proposed teaching system attempts have been made to look at the architectural composition theory in the light of the perception of the form, and - emerging in this process - emotional and aesthetic evaluations. In order to define which evaluations have been most often expressed during the perception process of architectural forms, the students of Architecture Faculty in Bialystok Technical University have been polled on the subject: ,,Which words are most commonly used in the descriptions of architecture works?"
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
doi	https://doi.org/10.52842/conf.ecaade.1994.185
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	28dd
authors	Bridges, Alan
year	1994
title	Architectural Computing Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v5x
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 226
summary	Many papers at previous eCAADe conferences have discussed CAD curricula, but few have questioned the educational objectives of teaching CAD. I wish to use this short paper to discuss not only what should be taught but why and how it should be taught. Topics covered include: styles of teaching and learning; individual or group working; and principles versus practicalities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	67fd
authors	Brown, Paul
year	1994
title	Hype, Hope and Cyberspace -or- Paradigms Lost Pedagogical Problems at the Digital Frontier
doi	https://doi.org/10.52842/conf.ecaade.1994.007
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 7-12
summary	A number of critical issues and problems have evolved over the past 20 years as computers have been introduced into the art and design curriculum. This essay compares the pragmatic demands of tool usage and the metaphorical emulation of traditional media with the need for examination of fundamental issues.
series	eCAADe
last changed	2022/06/07 07:54

_id	4727
authors	Cabellos, C., Casaus, A., Fargas, J., Mas, M., Papazian,P. and Roses, J.
year	1994
title	Heterogeneous, Distributed, Collaborative: The Li-Long Virtual Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.175
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 175-182
summary	This paper describes the Li-Long Virtual Design Studio, which involved six universities in three countries, collaborating in a distributed asynchronous manner on a two-week design exercise. We give an account of the technical, methodological and design aspects of the exercise, concentrating on the perspective of the Barcelona node, and evaluating some of the technical tools used in the studio.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	01ef
authors	Cajati, Claudio
year	1994
title	From Real to Virtual Building Behaviours: “Expert Hypertexts” in the Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5v
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 243
summary	Starting from the refuse of the most impressive, on fashion performances of the so called Virtual Reality, I hypothize for the architectural education of the next decade a strategy based on the following scenario: ()- as regards the form of the virtual studio, it should result from the synergy of many moments and opportunities: telematic interaction; students working at home; students training through assistant design tools in the university venue, with or without teachers’ supervision; informal discussion teachers-students about such training; traditional teachers’ lectures as introductions or resumes; (-) as regards the function of the virtual studio, it should realize the awareness of building behaviours, by teaching architectural design through the critical analysis of positive and - even more important - negative “precedents”.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	0e58
authors	Campbell, D.A. and Wells, M.
year	1994
title	A Critique of Virtual Reality in the Architectural Design Process, R-94-3
source	Human Interface Technology Laboratory, University of Washington, Seattle, USA, http://www.hitl.washington.edu/publications/r-94-3/: 23 May 2001
summary	An addition to a building was designed using virtual reality (VR). The project was part of a design studio for graduate students of architecture. During the design process a detailed journal of activities was kept. In addition, the design implemented with VR was compared to designs implemented with more traditional methods. Both immersive and non-immersive VR simulations were attempted. Part of the rationale for exploring the use of VR in this manner was to develop insight into how VR techniques can be incorporated into the architectural design process, and to provide guidance for the implementers of future VR systems. This paper describes the role of VR in schematic design, through design development to presentation and evaluation. In addition, there are some comments on the effects of VR on detailed design. VR proved to be advantageous in several phases of the design. However, several shortcomings in both hardware and software became apparent. These are described, and a number of recommendations are provided.
series	other
email
last changed	2003/04/23 15:50

_id	ee50
authors	Campioli, Andrea and Talamo, Cinzia
year	1994
title	IPERTEC: Hypertext Information System for Dry-assembled Building Elements
doi	https://doi.org/10.52842/conf.ecaade.1994.x.b3p
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 239
summary	The experience presented concerns the study of advanced information tools for design disciplines teaching. The objectives pursued are: on one hand self-teaching according to methods that go beyond traditional technical manuals and specialized texts and that give a systemic view of the strict connections between technological culture and design poetics; on the other hand assistance during design exercises as far as references assumption and deep analysis of technical and architectural topics are concerned. The result of the research is the information system Ipertec, a hypertext handbook with didactic purposes allowing students to approach executive techniques of dry assembly.
series	eCAADe
last changed	2022/06/07 07:50

_id	6651
id	6651
authors	Chen, N., Kvan, T., Wojtowicz, J., Van Bakergem, D., Casaus, T., Davidson, J., Fargas, J., Hubbell, K., Mitchell, W., Nagakura, T. and Papazian, P.
year	1994
title	PLACE, TIME AND THE VIRTUAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.acadia.1994.115
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 115-132
summary	A design problem shared over the Internet raises issues of how digital media and group dynamics affect networked design collaborations. This paper describes how to conduct a long-distance studio and compares asynchronous and synchronous collaborative techniques. Digital methods are discussed in relationship to both the creative process and design communication. In schematic stages, less precise tools used asynchronously allow free exploration and creative misreadings, while in later stages, more direct real-time exchanges bring a project to resolution. For the final review, synchronous video-conferencing with interactive graphics allow comparison of cross-cultural differences. Used effectively, these tools can electronically create a compelling sense of place. Ways to foster a strong virtual community are discussed in an agenda for future virtual design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
doi	https://doi.org/10.52842/conf.ecaade.1994.060
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

_id	887f
authors	Donath, D.
year	1994
title	The Reflection of Research in Education CAAD
doi	https://doi.org/10.52842/conf.ecaade.1994.x.c4a
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 256
summary	More and more the education of CAAD has a fixed place in teaching architecture and urban planning students. In this point of view, the influence of research in this field is necessary for a good and high qualitative level of lectures using computer tools.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	627a
authors	Eddison, Tony
year	1994
title	An Investigation of the Concept of Designer Style and its Relevance to The Design of CAD Systems
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t0t
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 213
summary	Underlying the notion of style is the basic premise that all designers are not the same and that the manner in which any designer works through a design problem towards a proposed solution may be qualitatively different from other designers. If, through this work, this is shown to be the case and the concept of designer style can be meaningfully discussed then any model of the design process and any system or product relating to this model must allow for such variations at the level of the group or individual. This is the starting point of this investigation of the concept of designer styles.
series	eCAADe
last changed	2022/06/07 07:50

_id	c967
authors	Fantacone, Enrico
year	1994
title	Exporting CAD Teaching into Developing Countries
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t3s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 222
summary	In 1986 the Faculty of Architecture was established in Maputo. It is financed by the Italian Ministry of Foreign Affairs and managed by a Scientific Council of the Faculty of Architecture of "Università La Sapienza" of Rome. The need to create human technical resources beeing able to work profesionally as soon as they finish their studies, made the teaching basis for lab exercises and design. The new architects (the first six students graduated in 1991), need to design and make very important decisions without any control by more experienced local technical institutions. The creation of a CAAD laboratory, and the teaching of information technologies and metodologies in architectural designing aimes to achieve a double goal: (-) to make the new architects able to manage on their own, because of the lack of qualified human resources, large quantity of data, and difficult design problems; (-) to make University, the most important scientific center in the country, an information exchange center between developped countries, and Moçambique.
series	eCAADe
last changed	2022/06/07 07:50

_id	8708
authors	Fernández, A., Bustinza, J. and Aranda, E.
year	1994
title	The Electronic Aleph: Borges on the Virtual Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.x.g7d
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 216
summary	Current design process and communication in architecture are being challenged by the use of computing techniques.
series	eCAADe
last changed	2022/06/07 07:50

_id	6572
authors	Fioravanti, A., Le Rose, L. and Sgueglia della Marra, C.
year	1994
title	KAAD: A Didactical Experience
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w3w
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 257
summary	Students in the last year of their course in Building Engineering in the "La Sapienza" University of Rome study questions of architectural design of considerable complexity, since they are characterised by a marked degree of multi-disciplinary work. In the preceding years, the students acquire specialist notions in the fields of thermal behaviour of buildings, technological equipment, static security, architectural composition, programming and costs, technical and constructional details, and so on. However, there is a need for integration at design level of the disciplines learned. At the CAAD Laboratory of the Department of Technical Architecture and Town-planning Technique, with the contribution of the National Research Council, a software known as KAAD (Knowledge-based Assistant for Architectural Design) has been devised, with the aim of providing an effective aid to the activity of design.
series	eCAADe
last changed	2022/06/07 07:50

_id	2775
authors	Fuchs, Wladyslaw and Wrona, Stefan K.
year	1994
title	Looking for the Best Place for Computer Models in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.043
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 43-46
summary	In the past, many Schools of Architecture were mastering skill of preparing hand made models and hand drawings as a main technique in design education (e.g. Warsaw School of Architecture). Introduction of CAAD to teaching process brings a new modelling techniques and a new possibilities. The role of computer models in architectural education is very promissing and still not fully recognized. Development of modelling techniques and communication media is much quicker than development of design studio concepts. Many concepts and experiments in this field had place in architectural schools all over the word. A new concept of design studio based on computer modelling techniques as a communication media is the subject of interest of the Warsaw School of Architecture. The virtuality versus reality in teaching concepts is one of the most important issues in our traditional, professionaly oriented school.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a3ef
authors	Garcia, F., Fernandez, A. and Barrallo, J.
year	1994
title	Discovering Fractal Geometry in CAAD
doi	https://doi.org/10.52842/conf.ecaade.1994.069
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 69-74
summary	Fractal geometry provides a powerful tool to explore the world of non-integer dimensions. Very short programs, easily comprehensible, can generate an extensive range of shapes and colors that can help us to understand the world we are living. This shapes are specially interesting in the simulation of plants, mountains, clouds and any kind of landscape, from deserts to rain-forests. The environment design, aleatory or conditioned, is one of the most important contributions of fractal geometry to CAAD. On a small scale, the design of fractal textures makes possible the simulation, in a very concise way, of wood, vegetation, water, minerals and a long list of materials very useful in photorealistic modeling.
series	eCAADe
last changed	2022/06/07 07:51

_id	a6fe
authors	Gatermann, Harald
year	1994
title	Using Hypermedia as a Teaching Tool in CAD Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v6m
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 211
summary	CAD-programs belong to the most complex kinds of software - complex and difficult in using and especially in learning for architects and for students. Some years ago we already tried to find ways for making the first steps easier for students and more comfortable for teachers: Our first attempt was to reduce the number of commands from 150 to only 20 in the first lesson by cutting off many of the pull-down-menus (it was even the time before the cad-program, we use, was running under windows). We supported the reduced menus on the screen by handing out a template with all the needed commands for the first lesson. We had two positive results: the first was a reduction of beginners frustrations about too many new things, the second was a homogenisation among the students´ know how: the very eager ones were no longer able to test too many new things! In the second lesson the students got another twenty new commands and so on (they could start the program with a batch rib-1, rib-2 etc.). Our second attempt was the development of new dialogues due to our experience in teaching and in looking at the same points of difficulties every year.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: