Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 354

Reformat results as: short short into frame detailed detailed into frame

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	e751
id	e751
authors	Clayton, M.J., Kunz, J.C., Fischer, M.A. and Teicholz, P.
year	1994
title	First Drawings, Then Semantics
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 13-26
doi	https://doi.org/10.52842/conf.acadia.1994.013
summary	The Semantic Modeling Extension (SME) prototype implements a unique approach to integrated architectural CAD that places the drawing act first in the design process. After drawing a design idea using a computer graphic system, the designer interprets the design, providing semantic content to the graphic entities. An interpretation expresses the meaning of the design with respect to a particular issue, such as structural sufficiency, energy consumption, or requirements for egress, and provides reasoning to evaluate the design addressing that issue. A design may have many interpretations to express the multiple issues that are relevant in a design project. The designer may add or delete interpretations of the design as issues change during the course of the project. Underlying the SME prototype are the concepts of form, function and behavior. In the prototype, evaluation of a design is done by deriving behavior from the graphically represented forms and relating the behavior to stated functions or requirements. The concepts of interpretations and form, function and behavior together establish a virtual product model for design. In contrast to component based approaches to product modeling that tightly bind form representations to their behavior and function, a virtual product model allows the designer to manipulate the relations among these three descriptors of a design, and thus manipulate the semantics of the design entities. By distinguishing between the act of proposing a design by drawing the conceived form and the act of assigning meaning to the form, the virtual product model approach supports both graphic thinking for design synthesis and symbolic reasoning for design evaluation. This paper presents a scenario of the use of the SME prototype in building design; provides an analysis of the design process and computational support described in the scenario; contrasts a virtual product model approach with a component-oriented product model approach; describes the software implementation of SME; and presents implications and conclusions regarding design process and technical integration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddss9429
id	ddss9429
authors	Geerling, Heinrich
year	1994
title	A Proposal for a Framework for Business Re-engineering in Design and Realization of Artificial Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	According to the Top-Down design process', this paper gives a generic and qualitative description of a Concurrent Engineering Environment, that should support the problem solving procedure in town planning and architecture in a modern quality oriented society. A system that is based on the principal of democracy might guarantee the preservation of quality in the projection and realization of artificial environments. This environment can be seen as a part of the today often discussed "digital democracy", which practically is based on a infrastructure of computers, interfaces, software systems, a network, databases and a data presentation, that is able to comprise the expectations of professionals involved in the architecture and town planning process. The paper will discuss what the role of the designer and coordinator of this computer environment looks like,in order to design, plan, build and coordinate activities for the realization of this Concurrent Environment and how several software engineers work concurrently to develop tools that guarantee a modular integration. The backbone of this environment is the definition and use of standards for data exchange. Basically those standards are derived from two domains: artifacts will be described in a product model data, while natural resources are described in spatial data. Town planning has to integrate both models. It will be discussed briefly how far the data modelling language EXPRESS of part 11 of the ISO 10303 (Express Language Reference Manual) might be useful to model GIS related problems. An example will describe how a scenario of activities, from registration of real world data to recognition of requirements of society, the definition of development plans through design(competition), lawfulness checking and construction until demolition should look like.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9433
id	ddss9433
authors	Gorp, L.F.M. van, Gelder, J.T. de and Steenhuis, C.M.
year	1994
title	A Functional Approach to Conceptual Modelling of Steel Structures
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The life cycle of a steel structure can be divided into six main stages: design, detailing, manufacturing, erection, maintenance and demolition. For each stage, a different party is responsible,often using its own automation aids to assist its specific task. Since all parties operate on the same steel structure, there is a need for integration between the islands of automation. Most of the developments in this area, including ISO/STEP, are directed towards the development of conceptual models carrying all relevant information through the life cycle of the product. The conceptual models are developed following a probabilistic approach. In this approach, a conceptual model is inductively developed by analyzing and modelling empirical similarities. In this paper we explain the problems resulting from following a probabilistic modelling approach by presenting its consequences. This is illustrated by the logical product model developed in Eureka project "CIMSteel". A potential solution to these problems is proposed by presenting a functionalapproach to the development of an integrated system for design, detailing and manufacturing of steel structures. The strength of this approach is illustrated by a simple example.
series	DDSS
email
last changed	2003/08/07 16:36

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9449
id	ddss9449
authors	Kendall, Stephen
year	1994
title	Control of Parts: Identifying Patterns of Control in Production Chains
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	If we examine the stages of production of complex physical systems, we notice that parts change as they progress along a value chain. Parts are deformed, have parts removed, and are assembled and disassembled, in various sequences. In such processes, production operations (milling, cutting, aligning, attaching, and so on) are of particular interest, as are the sequences of production, since some operations and sequences have been found to be more efficient than others, lead to fewer mistakes and produce higher quality results. Research continues to be produced seeking to optimize production operations, sequences and product quality. The production operations we can observe in the making of artifacts are also of interest because they are by definition the result of action taken by certain agents. Parts are changed or controlled by human beings, employing their own hands or sophisticated machines. Today, we are used to making a distinction among agents involved in production: some agents specify what is to be made, and others make what is specified. One agent can do both, but specialization and division of labour has presented us with this distinction. This is now conventional, aside from whether it is "good" or not. The distinction is the basis for the interest in "concurrent design and production of products", the renewed focus on distribution and coordination of work in teams, and the related interest in understanding the dynamics of building systems in terms of the agents who control them. This paper focuses on the place certain kinds of agents take in complex production flows. Since production of parts is both a technical and a social enterprise, we will discover, when we look closely, complex webs of interactions which can be mapped, showing how agents relate to each other through the parts with which they are concerned. In examining the class of agents who control parts, we can see two patterns of control, termed DISPERSED PATTERNS and OVERLAPPING PATTERNS. These become palpable in a graphic diagramming tool, which is demonstrated in what follows. These diagrams also provide a means to consider the agents whose role is to specify what is to be made. The paper includes notes related studies in other fields.Finally, the paper suggests how this perspective can be useful, and several research topics based on it are sketched.
series	DDSS
last changed	2003/08/07 16:36

_id	0ecc
authors	Anh, Tran Hoai
year	1994
title	APPLICATION OF FULL-SCALE MODELLING IN VIETNAM: AN OUTLINE FOR DISCUSSION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary	This paper discusses the possibility of applying full-scale modelling in Vietnam, a non-western so called developing country. It deals with two main questions: 1) Is the application of full-scale modelling to be restricted to the West only? 2) what are the possibilities, constraints and fields of application - with attention to the methodological validity and technical solution for full-scale modelling in Vietnam? It is argued that since full-scale modelling is based on people-environment interaction, it should, in principle, apply to studies about people–environment relation anywhere on earth. On the methodological validity, it is discussed that application of full-scale modelling in Vietnam faces similar methodological problems as encountered in European applications (such as people's behaviour in experiment, ability to understand the abstraction of models, etc.) although at another level as this paper will make clear. However, it would be needed to design a modelling kit that is of low costs and adapted to the availability of local materials and suitable for the climatic condition of Vietnam. Two fields of application are projected as most applicable in Vietnam: modelling in architectural education and research investigation. Application for user's participation in the design process will depend on the development of building policy in the country.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
last changed	2004/05/04 11:00

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9419
id	ddss9419
authors	Choukry, Maha
year	1994
title	Knowledge Acquisition by Measurement: The Domain of Building Change
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper presents a study that is aimed at finding a basis for systematic knowledge acquisition. More specifically, it attempts to introduce, knowledge acquisition by measurement: a method thatallows objective evaluation of empirical observations. Measurement has proven to be a significant tool to acquire, evaluate, and upgrade knowledge in some knowledge domains. In other domains,such as the domain of building change, measurement is barely subject of study. Building change knowledge acquisition by measurement seems to become a significant subject of study for several reasons: (i) increase our objective knowledge of previous building changes, (ii) allow systematic monitoring of present changes, and (iii) assist decisions planning for change in new buildings. In current studies, questions such as what were required changes, what were the building elements that fulfilled a change, how often did a building change, and what were the costs related to a change, often get no systematic or objective answers. Hence, to overcome that, I am concerned with finding a method that is to answer the following questions: 1) What is the domain of building change; 2) Is a method of knowledge acquisition by measurement adequate to represent buildingchanges; 3) Can empirical observations of building change be systematically represented and objectively evaluated using this method; and 4) How can this method be applied to assist theunderstanding of previous changes, the control of present changes, and assist planning for building change. The method introduced is based on three modules: (i) domain of building change; (ii) modelling this domain; and (iii) measurement. These three modules enable the formulation of the measurement of building change, namely the change indicator. Multiple change indicators, such as cost change indicator, or occurrence change indicator can measure empirical observations ofbuilding change. Sequential steps that lead to the development of this method start by section 1, where the domain of building change is specified. In section 2 this domain is modelled, and in section 3, knowledge acquisition by measurement method is introduced. A case study, shows how empirical building changes can be measured is explained in section 4. In section 5, three possible applications are introduced, and in section 6, I explain how a computerized prototype would enhance the efficiency of using such applications. Findings and conclusions resulting from this study are summarized in section 7.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9447
id	ddss9447
authors	Jabi, Wassim
year	1994
title	An Outline of the Requirements for a Computer Supported Collaborative Design System
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of specific rules and grammars. Yet, there is a general consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still cannot support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. Thus, if CAAD is to ultimately benefit the design process, it must (1) emulate and support the design team approach to architectural problem solving and (2) be deployed in the earliest possible stages of the design process. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the interaction between a set of requirements (the building program) and the architectural solution that satisfies them (the schematic design). The core of this interaction forms the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modelling (based on the NIAM notation), object-oriented algorithms, and distributed agents. Based on a literature survey and earlier findings on the role of artifacts in collaborative design, this paper outlines the requirements for the above system and reports on initial experiments. Thus, it constitutes the first stage of a research project that will lead to a full implementation of a distributed collaborative computer environment addressing the above issues.
series	DDSS
type	normal paper
email
last changed	2008/06/12 16:32

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9480
id	ddss9480
authors	Schipper, Roel and Augenbroe, Godfried
year	1994
title	An Information Model of Energy Performance in Early Building Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design is a creative and dynamic process. The level to which a future generation of Intelligent Integrated Building Design Systems will be able to support this process depends on the power of the underlying conceptual models to cover the semantics of design. In the definition of generic building models, the concept of constraints appears to be a powerful means to formalize those semantics. Both design performance goals, and rules and relations in design composition can be described as constraints. The Engineering Data Model (EDM), recently developed at UCLA, acknowledges this fact. It allows the formal definition of object oriented building models, using constraints as the central concept for describing relations. This paper will discuss the development of an EDM building model for the integrated design for energy performance, and the implementa-tion of this model in a small prototype system. We will specifically deal with modelling informati-on in the early design stages. This information typically consists of multiple global design alternatives on one hand, and a wide range of conflicting design goals on the other hand. In the paper, it is demonstrated that integration of these conflicting views on building performance in one coherent model is the key to obtaining an optimal design result. Using the Dutch building codes for energy performance (NEN 2916) as an example of design goals, the concepts and relations of these building codes were translated to a formal EDM model. A small shell was built on top of this computer-interpretable model, to demonstrate the useability of the model during the solving of a concrete design problem. It is shown that the EDM building model is able to provide the designer with integrated information through combining different sets of performance constraints and design alternatives in one environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	627a
authors	Eddison, Tony
year	1994
title	An Investigation of the Concept of Designer Style and its Relevance to The Design of CAD Systems
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 213
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t0t
summary	Underlying the notion of style is the basic premise that all designers are not the same and that the manner in which any designer works through a design problem towards a proposed solution may be qualitatively different from other designers. If, through this work, this is shown to be the case and the concept of designer style can be meaningfully discussed then any model of the design process and any system or product relating to this model must allow for such variations at the level of the group or individual. This is the starting point of this investigation of the concept of designer styles.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9441
id	ddss9441
authors	Hammond, Barbara
year	1994
title	Computer Aided Urban Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The product of the Urban Design process in the public sector in the UK is usually a briefing document of some kind which communicates design ideas in outline both to the lay public and to private developers. The problem with briefing effectively is that outline expression of ideas does not provide a strong basis for negotiation with developers; the temptation therefore is to work up one proposal in detail and to present it as the only option. This type of prescriptive briefing may be successful in situations where the public body has control over the land, the economy is buoyant and the site has a simple context. Its problems are that it is labour intensive, so some areas are covered in detail, others not at all; it is seen as restrictive by developers, so may create a climate of conflict rather than certainty; it is not responsive to change; it covers specific sites thoroughly but does not deal well with large, complex areas; on large sites it tends towards a homogeneous environment whereas the nature of towns and cities is pluralistic and heterogeneous; it confines the Urban Designer to site specific work rather than allowing concentration on the whole urban system. Urban Designers at the London Docklands Development Corporation felt that CAD might present some answers to these problems in facilitating an iterative, interactive briefing process which could respond quickly to change; whereby varying options for development could be investigated fully but quickly and resource-efficiently; which could be used to communicate design ideas effectively to non-professionals; which could help to make negotiation with developers more effective, less confrontational; which could deal with large, complex sites effectively. The idea was that a piece of city could be modeled on the computer and an urban design study would then be carried out on it which would test varying options for development, resulting in an outline, but three dimensional, model for an area which could be used in three ways: as a briefing tool, as part of a marketing exercise and as a tool to aid effective negotiation and consultation at the planning stage. A pilot project was carried out on a set of development sites at East India Dock and, following the success of this, a full study was carried at Surrey Quays Centre. The paper describes these projects and discusses both their products and their effect on the developmentprocess as aids in decision making.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9448
id	ddss9448
authors	Kane, Andy and Szalapaj, Peter
year	1994
title	Intuitive Analysis as Mediator Between Concept and Representation
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Representation in Computer Aided Architectural Design Systems has to date largely focused on the presentation of the end product of design activity, namely the ultimate built form. In thisrespect, 3-dimensional representations traditionally associated with CAAD visualization have relied heavily upon verisimilitude for their efficacy, and have therefore necessitated high levels of dimensional accuracy together with exhaustive description, both of which are absent in the early stages of design formulation. This paper investigates the desired structure of a computational design formulation system which is based, not upon the representation (or presentation) of ultimate form, but instead upon the representation of architectonic ideas resident in the designer's mind, which are central to the organization and generation of proposals. These ideas are of two kinds: conceptual generators, both poetic and architectonic, and the organizational parti or schematic proposals, which embody them. The representation of ideas rather than end form has two primaryobjectives. Firstly, it enables the designer's realization and clarification of concept or parti, and secondly, but most importantly, it enables the designer to critically assess these ideas in relation tothe contextual situation and brief. The computational representation must be structured in a manner which supports the designer's intuitive critical assessment of it, to in turn induce a modification and development of the initial design ideas. Repeated transformation, representation, and intuitive analysis, can then continue in a cyclical manner until an end proposal is achieved. Intuitive analysis, which becomes the mediator between idea and representation, is itself computationally supported by the dual methodologies of comparative and modal superimposition. Superimposition of previous with present representation (either in two or three dimensions)enhances comparative assessment of design developments. Modal analysis, on the other hand, facilitates the superimposition of schematic representations of modes of design thought (circulationpattern with volumetric arrangement, say) in order to intuitively assess their interaction or conflict.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9451
id	ddss9451
authors	Kolli, R., Hennessey, J. and Stuyver, R.
year	1994
title	A Conceptual Sketching Device for the Early Phase of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer tools are still not popular among designers during early phases of design. Existing mouse-based software applications provide excellent features for constructing precise drawings and illustrations, but they are cumbersome to use during conceptual design phase for rapid free form sketching. We propose a user interface concept for a new pen-based computer device calledIDEATOR. The functions and user interface style for IDEATOR were derived from our studies of industrial designers. Because of its simplicity and ease of use, we believe that the device will beof potential interest to architects, graphic designers, user interface designers and fashion designers as well. We interviewed practising industrial designers and several creative professionals at theirwork places to get an insight into user behaviour and work practices that are characteristic of the initial ideation phase [1]. Based on our observations, we envisaged a schematic user environment where several devices and systems support the various needs of designers. In a focused effort on sketching activity, we studied sketchbooks related to an entire project and video tapes of designers during sketching phase. From these, we derived the functional requirements for a sketching device [2]. In this paper, we describe the conceptual product form and user interface for IDEATOR which is based on LCD tablet technology and cordless electronic pens. We illustrate through our video prototypes, how it could be intuitively used to perform various ideation functions: sketching rapidly in colour, making quick collages of photographs, animating sketches and annotatinganimations or video. We are currently in the process of evaluating the concept prototype with several industrial designers.
series	DDSS
email
last changed	2003/08/07 16:36

_id	cd34
authors	Marinelli, A.M., Belibani, R. and Gadola, A.
year	1994
title	Multimedia in Communication: A Study on the Urban Image of Barcelona
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 103-107
doi	https://doi.org/10.52842/conf.ecaade.1994.103
summary	The Hypertext on Barcelona was realized within the interuniversity scientific research "La Produzione dei circuiti multimediali didattici per l'architettura e l'urbanistica" (The production of multimedia didactic circuits for architecture and urban planning), coordinator Prof. Paola Coppola Pignatelli - Dipartimento di Progettazione Architettonica e Urbana- Facoltà di Architettura, Università "La Sapienza", Roma, Italia. During the numerous debates on the relationship between multimedia and communication of the project a long list of problems emerged: the understanding and the management of explorable fields opened by these new media; the informative overflow that can introduce irrelevant information; the "interactive" anxiousness that produces a continuous jumping from one theme to another without any understanding; the identification of the right contents of a multimedia product, that requires an elaborate culture of media languages; the education of the users on new models of learning. From the debates emerged in short a principal point: the necessity to study and to experiment a "multimedia tool" able of transmitting knowledge not through a simple sum of data but through a group of information. If every single tool has -its own characteristics and if the combinations are not automatic, then the modes and contents should be examined. Is it possible therefore to invent a strategy of communication?
series	eCAADe
last changed	2022/06/07 07:59

For more results click below: