Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 354

Reformat results as: short short into frame detailed detailed into frame

_id	ca51
authors	Asanowicz, Aleksander
year	1994
title	CAFE: Composition for Architects - Forms and Emotions
doi	https://doi.org/10.52842/conf.ecaade.1994.x.l3s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 249
summary	In the architectural creation process there has always been an inclination to improve the methods of designing in the way of ,,objectivization" of designing process. Objectivization which would explain why we do design in this way and not the other. In spite of the trend to the total objectivization (Vitruvius, Alberti, Palladio), the results appeared to be still subjective, i.e. they included methods of designing typical of the one and only architect. This fact made them completely useless in the designing practice. On the other hand one cannot underestimate their meaning as to this very practice. Because it is just thanks to them that the development of designing studies has taken place. We do learn not only watching works of great architects, but also studying their opinions concerning problems of form, function and construction. That is why it seems to be useful to collect experiences concerning the classic theory of architectural composition, which have been gathered through centuries, as well as to try once again to objectivize the process. Composition information arranged in the form of data-base would create the ground for proper functioning of an expert system uniting diagnostic and planning functions. Study of that kind, not claiming design applications could be an excellent educational equipment in teaching architectural composition. In the proposed teaching system attempts have been made to look at the architectural composition theory in the light of the perception of the form, and - emerging in this process - emotional and aesthetic evaluations. In order to define which evaluations have been most often expressed during the perception process of architectural forms, the students of Architecture Faculty in Bialystok Technical University have been polled on the subject: ,,Which words are most commonly used in the descriptions of architecture works?"
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9425
id	ddss9425
authors	Deguchi, Atsushi and Hagishima, Satoshi
year	1994
title	Integration System for Urban Design from Planning Management to Visalization
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Advanced tools based on CAD or GIS systems and simulation methods have recently been introduced to support the many aspects of urban planning (design, analysis, evaluation, presentation). This research aims at constructing a system by integrating these support tools and linking GIS and simulation tools. The major purpose of this system are to manage the geographical data base of the target urban area, utilize the digital information of the area for planning and analysis,evaluate the impact of alternative proposals on the physical environment such as sunlight and daylight, visualize the results of analysis, and support the management of urban redevelopment /development projects. This paper shows some applications to illustrate usefulness of the system. These examples are concerned with a contemporary problem in urban planning of Tokyo: redevelopment of low-rise high-density residential districts and high-rise development in the central business districts. Urban redevelopment for the high-density urban areas in Japan requiresa evaluation of alternative plans by visualizing their environmental impact. This system enables the quantitative analysis of the environmental impact by using 3-dimensional geographical data andsimulation methods. In general, the merit and effect of planning support systems are recognized in terms of the "efficiency" of the planning process. The primary function of GIS is thought to bethe unification and management of various pieces of information. In addition, this research indicates the effectiveness of the integrated system in terms of utilizing the geographical information and visualizing the image of the future environment.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss9406
id	ddss9406
authors	Bakel, Anton P.M. van
year	1994
title	Assesing Strategy Questionnaire for Architectural Styles of Designing (ASQ-FASD)
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper the first results will be discussed that were obtained by the Assessing Strategy Questionnaire For Architectural Styles of Designing (ASQ-FASD). This questionnaire was developed specifically for the assessment of architectural design strategies. The construction of the questionnaire will be discussed in light of previous protocol research on strategic styles of designing. With this questionnaire, we developed a tool to assess an architects design strategy in a faster, easier and more reliable way than used to be the case with conventional protocol studies and other knowledge eliciting techniques like Card Sorting, and Repertory Grid. This questionnairewas submitted in a pilot study to 10 experienced Dutch architects. R.esults show that architects do indeed have preferences for different design situations. Moreover results indicate that they havea preference with respect to their responses within such specific situations. Though the generalizability coefficient was calculated for no more than 10 architects with a value of .57 (generalizing across situations), we feel that this is reason enough to assume that the questionnaire can be used to assess design strategies of architects. These results will be discussed with respect to the development of new design and decision support tools. The fact that designers have preferences for specific design problems and that they respond differently should be considered in the implementation of user interfaces and data base technology where possible.
series	DDSS
email
last changed	2003/08/07 16:36

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	ddss9420
id	ddss9420
authors	Christie, Colin Ian
year	1994
title	User Interfaces and Systems for Remote Design Working on ISDN Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper will discuss the requirements and possible configurations of user interfaces suitable for remote working multi-disciplinary design practices. Telecom companies throughout Europe are making heavy investments in digital communication technology (ISDN). The networks being created will form a standard method of high speed data transfer which can be readily accessed by any computer hardware platform. There are great opportunities for remote working by design groups, not simply sharing data but also interactive working and video communications. Digital communications provide the electronic arterial system to the new field of remote computing,whilst cheap and effective hardware and software support systems provide readily usable platforms on which to build remote multi-disciplinary design practices where the exploitation of specialistknowledge and skills is not limited by traditional methods of communication. ISDN networks allow real time video, voice and design software interaction - indeed, everything except the designer's physical presence. However as with all computer technology and indeed communications technology the user interface which gives access and control is vitally important. The user interface should provide the following features: be transparent to the user and simple and reliable to operate; allow an interactive window/s into the remote site's design information whatever the type of application being dealt with; carry out data compression, file transfer and file management procedures with minimum input from the user; cause no conflicts with design software or secondary applications;be able to access different platforms.
series	DDSS
last changed	2003/08/07 16:36

_id	f586
authors	Gabriel, G. and Maher, M.L.
year	2000
title	Analysis of design communication with and without computer mediation
source	Proceedings of Co-designing 2000, pp. 329-337
summary	With recent developments in CAD and communication technologies, the way we visualise and communicate design representations is changing. A matter of great interest to architects, practitioners and researchers alike, is how computer technology might affect the way they think and work. The concern is not about the notion of 'support' alone, but about ensuring that computers do not disrupt the design process and collaborative activity already going on (Bannon and Schmidt, 1991). Designing new collaborative tools will then have to be guided by a better understanding of how collaborative work is accomplished and by understanding what resources the collaborators use and what hindrances they encounter in their work (Finholt et al., 1990). Designing, as a more abstract notion, is different than having a business meeting using video conferencing. In design it is more important to 'see' what is being discussed rather than 'watch' the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the method with which it is communicated (See Kvan, 1994). Similarly, we believe that by using text instead of audio as a medium for verbal communication, verbal representations can then be recorded alongside graphical representations for later retrieval and use. In this paper we present the results of a study on collaborative design in three different environments: face-to-face (FTF), computer-mediated using video conferencing (CMCD-a), and computer-mediated using "talk by typing" (CMCD-b). The underlying aim is to establish a clearer notion of the collaborative needs of architects using computer-mediation. In turn this has the potential in assisting developers when designing new collaborative tools and in assisting designers when selecting an environment for a collaborative session.
series	other
last changed	2003/04/23 15:50

_id	2f05
authors	Kashiwagi, D.T.
year	1999
title	The construction delivery system of the information age
source	Automation in Construction 8 (4) (1999) pp. 417-425
summary	The Performance Based Studies Research Group (PBSRG) at the Del E. Webb School of Construction, has developed a methodology to process data into information to reduce facility system life-cycle cost and risk of nonperformance. The methodology reshapes the current construction industry model from a `low-bid', `all the same' industry into a `value added' performance based industry. The performance information regulated industry changes roles, partnerships, and communication methods between the construction industry and facility owners. The PBSRG research effort (US$1000K, 1994–present) includes the design and improvement of the Performance Based Procurement System (PBPS), performance data collection on general, mechanical, electrical, landscaping and janitorial services, and design services in the public and private commercial sectors, the identification of performance levels in the industrial sector, and the design of a performance based structure for a manufacturer of construction systems, as well as the education of the facility owners and the construction industry.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	b9c4
authors	Kim, Inhan
year	1994
title	Data representations in an integrated architectural design environment
source	University of Strathclyde, Dept. of Architecture and Building Science
summary	The architectural design process is very complex and involves cross-disciplinary communication among many related fields. Given the further problems arising from the technological advances in building materials and construction methods, an integrated design environment becomes a central design issue. There have been many attempts to analyse and structure the design process as a uniform hierarchical framework. Most of the attempts resulted in a vague and inappropriate outcome due to the lack of understanding of architectural design complexity and inconsistent design data control sequence. A design problem cannot be comprehensively stated because the design problem has a multi-disciplinary nature and the design problem itself evolves as solutions are attempted by the designer. Therefore, an ideal CAAD system should have the capability to accommodate the multi-disciplinary nature of design and should not prescribe or restrict design concepts and design knowledge. A well designed integrated design environment provides more information and invokes creative imagination for each design stage, and therefore creative decision making by the designer can be achieved. This thesis proposes a prototype architectural design environment, Hybrid Integrated Design Environment [HIDE], which aims to integrate all applications for designing a building. Within the object-oriented design environment, a unified data model and a data management system have been implemented to seamlessly connect all applications. Development of the environment needs to consider the fundamental interaction between each module. Devising a data structure that is appropriate to an effective data communication among the various design stages is essential in a totally integrated CAAD system. The suggested unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. By means of the unified data model, integrated CAAD systems could represent and exchange design information at a semantic level, i.e. the user’s way of thinking, such as exchanging components and features of a building rather than graphical primitives. In consequence, the unified data model reduces the misunderstandings and communication problems among the multiple disciplines of architectural design. The suggested data management system supports the consistent and straight forward mechanisms for controlling the data representation through the inter-connected modules. It is responsible for creating, maintaining, and viewing a consistent database of the design description. It also helps to perform effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. To support inter-disciplinary communication of design concepts and decisions, the integrating of relevant CAAD tools is essential. In the environment, the integration of CAAD tools has been performed on the basis of how well computerized design tools can assist designers to develop better solutions, enabling them to manipulate and appraise varying solutions quickly and with a minimum of effort in an environment conducive to creative design. A well designed user interface system can also benefit the seamless working environment. The proposed user friendly interface system allows a user to explore the environment in a highly interactive manner. From the development of the early data model to the final design, a user could benefit from the prototypes and methods of the user interface system. The ultimate goal of the prototype environment is to suggest a future design environment which helps the architect to have minimum discontinuity in his creativity and make the design process similar to the natural design process with the help of a set of design assistance modules. A prototype version of HIDE has been implemented and a demonstration of the environment is part of this thesis.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	a43d
authors	Kim, Inhan
year	1994
title	Unified Data Organization and Management in an Integrated Design Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 254
summary	The architectural design process is very complex and it is not easily confined to a single design environment. As the design process gets more complex due to the technological advances in building materials and construction methods, an integrated design system becomes a central design issue. To have an integrated design system, all applications should be integrated in a unified environment within which there should be a data structure to facilitate an effective data communication among the various design stages and data control facility to seamlessly connect all these applications. A primary purpose of this work is to suggest an object oriented architectural design environment for the essential part of the seamless environment for designing a building. Within the object-oriented design environment, a unified data model and detailed data control module have been implemented to seamlessly connect all these applications. The unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. It also helps to do effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. The data management module supports the consistent and easy mechanisms in controlling the data representation through the inter-connected modules. It is also responsible for creating, maintaining, and viewing a consistent database of the design description. In the suggested design environment, each architectural element partially describes the model and individual elements are aggregated hierarchically. Some parts of the projection are defined and other can be inherited from above. Also, creation of an improved or new design element can easily be accommodated in the environment. The integrated database in the suggested environment is the basis by which design data can be shared among the design tools of the design environment. The database organizes the design description within each representation, correlates equivalent descriptions across the representations, and attempts to maintain these correspondences as the design incrementally evolves.
series	eCAADe
last changed	2022/06/07 07:50

_id	f59d
authors	Koelbl, R., Bruntsch, St. and Knoflacher, H.
year	2003
title	Perspective Vienna – A Comparison of Planning Scenarios and Real Development
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	With the suspension of national boarders in unions of nations, cities and their regions gain in significance for the economic, social and cultural development. This is particularly valid for Vienna, which lies close to the eastern boarder of the European Union, which should fall with the enlargement of EU in the near future. Of prominent importance is therefore to obtain a comprehensive understanding between proposed and defined aims for an urban development, the related measures and their extent ofimplementations and their actual or real effects. This paper attempts to give a strategic analysis of the Viennese urban and traffic development programs, from 1962, 1972, 1984 and 1994, on the one hand, and the data analysis of the statistical year books beginning from 1960 until 2000, on the other. The results show that adjustments have been made not only in response to certain trends, but also to a change of philosophy of urban development. It can be seen that certain assumptions of, for example, economic and transport measures can have the opposite outcome in relation to the intended objectives. Hence, one main question remains to beanswered: How should Vienna deal with the challenges ahead, to secure and foster a sustainable development under such circumstances on a long-term basis. In this respect, some measures are given, which should make it possible to overcome successfully these challenges.
series	other
email
last changed	2003/03/11 20:39

_id	ddss9450
id	ddss9450
authors	Kohsaka, Hiroyuki
year	1994
title	Spatial Decision Support System for Retail Activity
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This presentation proposes an architecture of Spatial Support System (SDSS) for retail activity. This SDSS is made up of four key modules: data, monitoring, spatial analysis/modelling, and map and report generators. In the data module, spatial shopping data are gathered from Point of Sales (POS) Systems as well as trade area surveys. Two examples will be presented to collect spatial shopping data. One is from an ordinal trade area survey and the other is from point IC cards. The monitoring module can represent retail trade areas as three-dimensional surfaces as well as contour maps by using a colour graphics display after a cartographic analysis which consists of gridding and interpolation of these data. As an application example of monitoring module, retail trade area for a store or a shopping street will be shown as a three-dimensional surface. In addition, themonitoring module can describe a retail structure consisting of the trade area of several retail stores to analyze the spatial competition of them. In the spatial analysis/modelling module, optimization methods search for an optimal location of a new store and an impact analysis assesses the locational impacts of the store upon the existing stores. An optimal location of new supermarket will be solved as an example for this module.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9456
id	ddss9456
authors	Kubiak, Bernard and Korowicki, Antoni
year	1994
title	Identification And Analysis of the Recreational Behaviour Forms and the Needed Recreational Space Using the Integrated Spatial and Object-Oriented Gis: Concepts and Statements
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper is concerned with how to measure and investigate changes in the recreational behaviour and the required recreational space in Polish seaside recreational areas in last few years. Spatial information is an integral part of the identification and analysis of recreational behaviour and required recreational space. We postulate, therefore, that spatial information should be fully incorporated in integrated object-oriented GIS and Decision Support Technology. We argue in this paper that the existing theoretical approaches with their descriptive and technical basis do not offer directions for its application and evaluation. They do not seek to explain the processes undergone by spatial information, nor define appropriate data models. New approaches to GIS use object-oriented structures and expert systems concepts, and they will become increasingly helpful in understanding GIS. It is not unreasonable to expect that the most important issue is to use a data model or object-oriented models which closely represent the user's concept of the geographic object for representing spatial phenomena. We have discovered that most Polish users in this field are unable to collect the data they require directly. Thus they have to use methods and techniques, which cannot be found in GIS such as SWOT analysis. According to our experiences, the identification and analysis of the recreational behaviour and the required recreational space should be defined as a system approach where: (i) recreational space requires an object, (ii) state of recreational space is defined by the set of values of recreational space features, and (iii) the utility of the recreational space is defined by a set of features. The identification and analysis of the recreational behaviour in the presented approach are based on the features/utilities matrix of the recreational space and the computer map. The development of such a system needs many organizational changes. It is shown that in many applications organizational rather than the technical aspects of GIS determine their future and open the way to new spatial analytical techniques.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9462
id	ddss9462
authors	Liggett, Robert S. and Jepson, William H.
year	1994
title	Implementing an Integrated Environment for Urban Simulation CAD, Visualization and GIS
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Using technology which has been adapted from military flight simulation hardware and software, researchers at UCLA's Graduate School of Architecture and Urban Planning are currently developing an integrated computing environment for Urban Simulation which includes a high-level visual simulation package, an industry standard CAD system, and a traditional two dimensional geographic information system and data bases. The focal point of the integrated system is a visual simulation engine which has been developed using Silicon Graphics' IRIS Performer application development environment. With this system, aerial photographs can be combined with street level video to efficiently create a realistic (down to plants, street signs and the graffiti on the walls) model of an urban neighbourhood which can then be used for interactive fly and walk-through demonstrations. Links have been established between this visual simulation system and AutoCAD to allow models (at varying levels of detail) to be generated using the CAD system and translated into the form required for the visualization system. Links between the GIS system (in this case ARC/INFO and ARCVIEW) and the visual simulation system provide the capability for dynamic query and display of information from the GIS data base in a real-time 3-dimensional format. Links between the CAD and GIS systems allow common base maps to be used for the GIS and modelling systems as well as automatic generation of 3-d form. While an earlier paper by the authors discussed proposed strategies for such an Urban Simulation System, this paper focuses on the results of actual implementation of these strategies, as well as the use of the system for modelling, exploration and display of alternative physical environments.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9478
id	ddss9478
authors	Saw, Seiji and Arima, Takafumi
year	1994
title	A Landscape Simulation System Which Integrates Geographical Feature Data and the Building Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many researchers examine landscapes at the architectural scale. However, landscapes should be examined at different scales and we should include those elements in city development projects. This paper describes the results of a research project which aims at combining such data to create an image the landscape that comes close to reality. Oita City was divided into a grid of 250 meter * 250 meter. Each grid was divided into eight triangular polygons. The geographical features used include: (i) a three-dimensional image constructed by calculating the polygons altitude in relation to the altitude of the adjacent grid; (ii) the ground texture based on different land uses; (iii) coordinate values in the form of buildings in the city centre; (iv) the number of floors of buildings and patterns of elevation collected by field observation and classified into 12 patterns. The computer program was very successful in creating the desired realistic image
series	DDSS
last changed	2003/08/07 16:36

_id	4b72
authors	Tovey, M.
year	1994
title	Form creation techniques for automotive CAD
source	Design Studies, Vol. 15, No. 1, pp. 85-114
summary	Although there is a significant commitment to the use of CAD in the car industry, the industrial designer makes less use of it than engineering designers do. Vehicle stylists responsible for the early stages of the process have found that CAD systems and procedures are ill-suited to their methods and needs. As there are considerable potential benefits to the overall proc if it can be based around integrated CAD systems using common data bases, there are good reasons for devising procedures for automotive stylists that overcome the problems which CAD systems seem to present. This project has been concerned with devising such procedures. It has included a collaborative exercise with a motor manufacturer and has resulted in a collection of recommended techniques for form creation on CAD for automotive designers.
series	journal paper
last changed	2003/04/23 15:14

_id	ddss9496
id	ddss9496
authors	Veenendaal, Martin H.
year	1994
title	Optimalization of Visualization: Graphical Diagonalization andClustering of Combinatorial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The analysis of combinatorial data is common to many disciplines as diverse as ethology, mathematics, computer science, psychology, demography, and architecture. Combinatorial data concern single relations that exist between the element pairs within one single pool of elements. TRI is a computer program that enables users to manually order combinatorial OTdangular) data matrices. "Ordering" in this context means placing high cell entries, coded as large dots, close together in clusters and close to the matrix's diagonal. Ordering, however, constitutes a very complex task. In order to support the ordering process, a straightforward measure has been developed which weighs the "amount" of clustering and diagonalization. The measure's value can be projected onto the monitor and perhaps serve as a "success indicator". A first experiment assessing the usefulness of the measure revealed that it does not consistently reflect subjective judgements of perceptual "order'. People may discern salient (although task irrelevant) patterns and regularities in dot configurations, for which the measure's cold calculus is insensitive [1]. In ongoing "human factors" experiments, the capability of experimental subjects to see through such "would be" order will be tested. One group will be amply instructed as to what the measure measures and how, and a second group will receive extensive visual instruction, using example matrices. The results of these and other experiments will help us decide whether or not to implement the measure in 1'RI, and how we can otherwise improve TRI as a powerful design and decision support tool.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9502
id	ddss9502
authors	Wang, Ming-Hung and Chao, Hua-Yu
year	1994
title	Spatial Schemata and Design Competence: A Case of Beginning Designers
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the course of learning professional skills in architectural design, students will develop, usually with the help of instructors, certain ways of analyzing spatial relations. Such spatial schemes are considered critical means to the comprehension of the graphical representations of spaces, and therefore schemes of different kind will have different effects on design performance. This study intends to explore this issue. Three sets of experiments are conducted to test our working hypotheses as stated as follows: (i) to reproduce a plane graphic requires knowledge and skills different from those to recognize; (ii) some schemes are more effective than others in reproducing plane graphics; (iii) the kind of schemes that can effectively reproducing given forms (in plane graphics) can also have positive effects on design capabilities. It is interesting to further differenti-ate the kinds of schemes and their power as design tools. All these experiments employ three kinds of spatial schemes: the categorical, the referential, and the hierarchical from the results we can reach the following conclusions: (i) reconstruction is a different mental activity from recognition which is mainly a comparison between the input data and the known characteristics reconstruction relies more on the structured relations among data that should be established in the course of recognition. Therefore, effective cognition is a part of design competence; (ii) categori-cal schema is found most effective in recognition test. The quality of this type has to do with the quality of its contents. Referential schema can effectively relate elements to one another and to the context in which they are located. This schema contributes to the quality of spatial compositions. Hierarchical schemata are more general that can help identify dependent relations among elements, and therefore reduce the complexity. Conceivably this can increase the efficiency of problem-solving in design.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: