Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 359

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	a887
authors	Kaplan, Nancy and Moulthrop, Stuart
year	1994
title	Where No Mind Has Gone Before: Ontological Design for Virtual Spaces Papers
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994 pp. 206-216
summary	Hypermedia designers have tried to move beyond the directed graph concept, which defines hypermedia structures as aggregations of nodes and links. A substantial body of work attempts to describe hypertexts in terms of extended or global spaces. According to this approach, nodes and links acquire meaning in relation to the space in which they are deployed. Some theory of space thus becomes essential for any advance in hypermedia design; but the type of space implied by electronic information systems, from hyperdocuments to "consensual hallucinations," requires careful analysis. Familiar metaphors drawn from physics, architecture, and everyday experience have only limited descriptive or explanatory value for this type of space. As theorists of virtual reality point out, new information systems demand an internal rather than an external perspective. This shift demands a more sophisticated approach to hypermedia space, one that accounts both for stable design properties (architectonic space) and for unforeseen outcomes, or what Winograd and Flores call "breakdowns." Following Wexelblat in cyberspace theory and Dillon, McKnight, and Richardson in hypermedia theory, we call the domain of these outcomes semantic space. In two thought experiments, or brief exercises in interface design, we attempt to reconcile these divergent notions of space within the conceptual system of hypermedia.
keywords	Spatial Hypertext; Interface Design; Information Mapping; Navigation
series	other
last changed	2002/07/07 16:01

_id	4f13
authors	Ronchi, Alfredo M.
year	1994
title	A Brief History of CAAD in Italy
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 227
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f3n
summary	Twenty years of revolution, from the middle '70 to the middle '90. Many things have changed since the origins of computer graphics and computer aided design in architecture. We started teaching drafting on terminals which connected to mini computers, complex procedures or sets of graphics libraries working with keywords, vectors and storage screens. The next step was devoted to the discovery of workstations in the early '80's, where the user sat face on to the whole power of a multitasking system. At that time to use up to 16 time sharing processes running on the same work station seemed to have no practical use at all. Fortunately someone (ie Xerox PARC laboratories) at the same time started to develop the so-called GUI. Graphical user interface started a revolution in human/machine interface (ie Smalltalk). The desktop metaphor, the use of multiple windows and dialogues joined with icons and pop up menus let the user manage more applications and, even more important, created a standard in application/user interface (CUA). In the meantime focus had moved from hardware to software, systems being chosen from the software running. The true revolution we have seen starting from that base and involving an ever increasing number of users was the birth of PC based applications for CAAD. Generally speaking nowadays there are three main technologies concerning teaching: communication, multimedia and virtual reality. The first is the real base for future revolution. In the recent past we have started to learn how to manage information by computers. Now we can start to communicate and share information all over the world in real time. The new age opened by fax, followed by personal communication systems and networks is the entry point for a real revolution. We can work in the virtual office, meet in virtual space and cooperate in workgroups. ATM and ISDN based teleconferencing will provide a real working tool for many. The ever increasing number of e-mail addresses and network connections is carrying us towards the so called 'global village'. The future merger between personal digital assistant and personal communication will be fascinating. Multi & HyperMedia technology is, like a part of VR, a powerful way to share and transfer information in a structured form. We do not need to put things in a serial form removing links because we can transfer knowledge as is. Another interesting and fundamental aspect typical of VR applications is the capability to change cognitive processes from secondary (symbolic - reconstructive) to primary (perceptive - motory). In this way we can learn by direct experience, by experiment as opposed to reading books. All these things will affect not only ways of working but also ways of studying and teaching. Digital communications, multimedia and VR will help students, multimedia titles will provide different kinds of information directly at home using text, images, video clips and sounds. Obviously all those things will not substitute human relationship as a multimedia title does not compete against a book but it helps.
series	eCAADe
last changed	2022/06/07 07:50

_id	b110
id	b110
authors	Abadi Abbo, Isaac and Cavallin Calanche, Humerto
year	1994
title	Ecological Validity of Real Scale Models
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 31-40
summary	Space simulation is a technique employed by architects, urban designers, environmental psychologists and other related specialists. It is used for academic and research purposes, as an aid to evaluate the impact that the built environment or that to be built would yield in potential or real users. Real Scale Model is organized as one of the models which represents more reliable spatial characteristics in space simulations. However, it is necessary to know the ecological validity of the simulations carried out, that is the degree in which laboratory results could be taken as reliable and representative of real situations. In order to discover which variables of the model used are relevant so that their perception results ecologically valid in respect to reality, a research has been designed in which simulations of specific spaces are appraised both in real space and in the real scale model. The results of both evaluations were statistically analyzed and it shows no significative differences in psychological impressions between the evaluation of real spaces and real scale model. These ecological validation of the real scale model could be of great use to estimate the validity of the results obtained in spaces simulated in the laboratory.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2006/06/24 09:29

_id	ddss9435
id	ddss9435
authors	Grimshaw, Robert
year	1994
title	Simulation Models and Facility Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The paper is based on a now completed research project funded by SERC and carried out by the author and former colleagues from the University of Salford in a multi-disciplinary team comprising building maintenance experts and operational researchers. The project sought to develop a model to simulate manpower deployment in a building maintenance organisation using a single case study. Although the results of the project were limited in scope, being more concernedwith the development of the methodology to deal with such problems, the work did have useful outcomes including the development of a database which contained detailed information on the hourly deployment of labour on maintenance and facilities work over a 12 month period. The proposed paper will consider the implications of the output from both the database and the simulation model for the planning of facilities and the deployment of labour in developing and maintaining those facilities.
series	DDSS
last changed	2003/08/07 16:36

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	4f23
authors	Dieberger, Andreas
year	1994
title	Navigation in Spatial Information Environments: User Interface Design Issues for Hypertext and VR Systems Posters
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994
summary	The Information City project (presented in a poster at Hypertext 93) uses the spatial user interface metaphor of a city to organize and navigate large collections of hypertextual information. As we are used to navigate real life cities the city metaphor -- enriched with magic features -- should help to navigate information structures. A first implementation of the Information City was started in a MUD system. MUDs are networked multi-user text-adventure games which usually make use of a house / city metaphor. MUDs are conceptually similar to hypertext systems and navigational findings in those systems are therefore relevant also to hypertext. While implementing the first parts of the city research into navigation in MUDs was found necessary. This poster presents some results of this navigational study and describes how knowledge in the domains of architecture and city-planning can be used to design an easy to navigate virtual city. Highlights of the results concern magic features and collaboration. Magic features extend the spatial metaphor beyond typical properties of space. An example is the hypertext link which allows tunneling through the spatial structure. Other results concern the richness of spaces (or space-descriptions) and communication between users. It seems the chief benefit of the spatial metaphor of the city is in communication about spatial relationships of information. The findings probably are valuable in designing any information system using spatial metaphors. They are especially useful for hypertext systems realized in some virtual environment -- be it a MUD or an immerse virtual reality system.
series	other
last changed	2002/07/07 16:01

_id	ddss9456
id	ddss9456
authors	Kubiak, Bernard and Korowicki, Antoni
year	1994
title	Identification And Analysis of the Recreational Behaviour Forms and the Needed Recreational Space Using the Integrated Spatial and Object-Oriented Gis: Concepts and Statements
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper is concerned with how to measure and investigate changes in the recreational behaviour and the required recreational space in Polish seaside recreational areas in last few years. Spatial information is an integral part of the identification and analysis of recreational behaviour and required recreational space. We postulate, therefore, that spatial information should be fully incorporated in integrated object-oriented GIS and Decision Support Technology. We argue in this paper that the existing theoretical approaches with their descriptive and technical basis do not offer directions for its application and evaluation. They do not seek to explain the processes undergone by spatial information, nor define appropriate data models. New approaches to GIS use object-oriented structures and expert systems concepts, and they will become increasingly helpful in understanding GIS. It is not unreasonable to expect that the most important issue is to use a data model or object-oriented models which closely represent the user's concept of the geographic object for representing spatial phenomena. We have discovered that most Polish users in this field are unable to collect the data they require directly. Thus they have to use methods and techniques, which cannot be found in GIS such as SWOT analysis. According to our experiences, the identification and analysis of the recreational behaviour and the required recreational space should be defined as a system approach where: (i) recreational space requires an object, (ii) state of recreational space is defined by the set of values of recreational space features, and (iii) the utility of the recreational space is defined by a set of features. The identification and analysis of the recreational behaviour in the presented approach are based on the features/utilities matrix of the recreational space and the computer map. The development of such a system needs many organizational changes. It is shown that in many applications organizational rather than the technical aspects of GIS determine their future and open the way to new spatial analytical techniques.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9493
id	ddss9493
authors	Teldenburg, J.A.F., Timmermans, H.J.P. and Borgers, A.W.J.
year	1994
title	Design Tools in an Integrated Cad-Gis Environment: Space Syntax asan Example
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The focus of this paper is how to make good use of the possibilities offered by integrated CAD-GIS software. It addresses the problem of the difference in types of information required by urban designers and urban planners to perform their tasks. It is stated that there is an overlap in these types of information. Both planners and designers can benefit from the extension of information offered to them by the other party. Integrated CAD-GIS software facilitates the exchange of information. There is a need for implementation in the integrated CAD-GIS environment of a type of information that addresses designers and planners alike. The paper takes Space Syntax models as an example of such information.
series	DDSS
email
last changed	2003/08/07 16:36

_id	a6fe
authors	Gatermann, Harald
year	1994
title	Using Hypermedia as a Teaching Tool in CAD Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 211
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v6m
summary	CAD-programs belong to the most complex kinds of software - complex and difficult in using and especially in learning for architects and for students. Some years ago we already tried to find ways for making the first steps easier for students and more comfortable for teachers: Our first attempt was to reduce the number of commands from 150 to only 20 in the first lesson by cutting off many of the pull-down-menus (it was even the time before the cad-program, we use, was running under windows). We supported the reduced menus on the screen by handing out a template with all the needed commands for the first lesson. We had two positive results: the first was a reduction of beginners frustrations about too many new things, the second was a homogenisation among the students´ know how: the very eager ones were no longer able to test too many new things! In the second lesson the students got another twenty new commands and so on (they could start the program with a batch rib-1, rib-2 etc.). Our second attempt was the development of new dialogues due to our experience in teaching and in looking at the same points of difficulties every year.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddssup9610
id	ddssup9610
authors	Krafta, Romulo
year	1996
title	Built form and urban configuration development simulation
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "centrality/potential" model, proposed by Krafta (1994), for configurational development, aims at the simulation of inner city built form growth. This is generally achieved by simulating the uneven distribution of floor area increments, resulting from replacement of old buildings, considered "devalued capital" form new ones. The model considers two main variables - public urban space system and built form - and treats them unevenly; the former is extensively disaggregated whereas the latter is not. This feature enables the model to make just a rough account of intra-urban built form development. The issue of built form simulation is then taken further in the following way: a) Urban built form is disaggregated by types. Buildings are classified by a cross combination of scale, purpose, age and quality standard; b) The city is itself considered as a set of intertwined typologic cities. This means that each unit of public space is identified by its dominant built form type, producing a multilayered-discontinuous city. Each one has its own market characteristics: rentability, technological availability and demand size; c) The market constraints determine which layer-city has priority over the others, as well as each one's size of growth. References to rentability and demand size gives each built form type priorities for development d) Spatial conditions, in the form of particular evaluation of centrality and spatial opportunity measures, regulates the distribution of built form increments and typological succession. Locational values, denoted by centrality and spatial opportunity measures, area differently accounted for in each layer-city simulation. e) Simulation is obtained by "running" the model recursively. Each built form type is simulated separately and in hyerarquical order, so that priority and replacement of built form types is acknowledged properly.
series	DDSS
email
last changed	2003/08/07 16:36

_id	e807
authors	Anadol, Z., and Akin, O.
year	1994
title	Determining the impact of cad drafting tools on the building delivery process
source	The Int. Journal of Construction IT 2(1), pp.1-8
summary	Computer aided design is intended to change the way design and construction are carried out. at a minimum, this implies savings realized in terms of time spent and improvement of the quality of designs produced. to test this idea, we hypothesized that computer aided drafting and design operations may be instrumental in reducing the number of change orders issued and help control cost overruns by improving the accuracy of construction documents. we compared change orders in projects designed in the conventional media against ones developed with computers. we found that there is evidence supporting our hypothesis. furthermore, in the process of investigating this question, we found that computer applications to improve the management of existing building information (as-built drawings, building system related information, and the like) represent even more critical needs than those that can reduce change orders through more accurate design drawings.
series	journal paper
last changed	2003/05/15 21:45

_id	592b
authors	Apollonio, F., Carini, A., Farina, R., Nuti, F. and Tolomelli, F.
year	1994
title	THE ITALIAN FULL-SCALE MODEL LABORATORY: CONSIDERATIONS ABOUT SOME TOOLS FOR ARCHITECTURAL EXPERIMENTATION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 71-82
summary	The Italian simulation laboratory carries out most of its activity within the experimental programmes promoted by the Ministry of Works. Within this context, we conducted studies based on the topics of EUROPAN competitions for young architects, built models based on EUROREX programme's projects and analyzed experimental projects directly financed by the Ministry (mainly restoration projects).
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:01

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss9410
id	ddss9410
authors	Bodum, Lars
year	1994
title	Hypermedia-aided GIS in Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Town planning in Denmark is undergoing major changes from a planning approach focusing on regulation and individual frameworks for town districts, to a planning approach emphasizing the urban characteristics and drawing overall guidelines for planning. At the same time, attention has shifted to urban renewal and urban remodelling. This means that more qualitative data are needed.These new data types such as digital film, are to form part of a future GIS for the town. The digital film will change the impression of what data can profitably be used in a GIS. Even animations and 3D models, which were previously processed with considerable data power can beplayed as digital films. In the course of the next few years, the most ordinary applications will be able to play digital films and together with the progress made in other media, a development towards hypermedia will be a possibility. The paper will give some examples of how this integration may be carried out. In continuation of the preparation of a municipality atlas and in connection with an EC-subsidized urban renewal project, the municipality of Aalborg has chosen to work outa digital catalog which will in time replace the present local planning regulations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9413
id	ddss9413
authors	Branki, Cherif
year	1994
title	Communicative Acts in Cooperative Architectural Design Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a scheme, that can be used to support the communication process in cooperative design. Computational aids for design have largely been for a designerworking by himself/herself. These aids have also been supplemented by the widespread use of artificial intelligence approaches. However, design is so complex, and very rarely acted upon by a single designer but many more working towards the same aim. This involves a new paradigm in which designers need to cooperate with each other using a computational medium. A protocol analysis in cooperative design has been carried out and technological support has been proposed.Cooperative design becomes an important paradigm for the next generation of intelligent computer aided design systems. It will be conducted in many forms among several designers and willrequire the support of advanced communication facilities beyond the "passive" transmission of data and messages. Technological advances in communication networks have opened up new ways for cooperative design interaction across several processes of cooperation among designers, designers and computer aided design systems, computer aided design systems and knowledge based systems, and knowledge based systems themselves. In cooperative design environments, aunit of communication among designers is the transfer of a message from one designer (a sender) to another (a receiver). The aim of such communication is to provide the receiver with some information or to have the receiver take certain actions. Inspired by the speech act theory, a branch of the philosophy of language and linguistics, such a unit is called a communicative act. By analogy to architectural design, a communicative act is a performing act in designers communication.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9420
id	ddss9420
authors	Christie, Colin Ian
year	1994
title	User Interfaces and Systems for Remote Design Working on ISDN Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper will discuss the requirements and possible configurations of user interfaces suitable for remote working multi-disciplinary design practices. Telecom companies throughout Europe are making heavy investments in digital communication technology (ISDN). The networks being created will form a standard method of high speed data transfer which can be readily accessed by any computer hardware platform. There are great opportunities for remote working by design groups, not simply sharing data but also interactive working and video communications. Digital communications provide the electronic arterial system to the new field of remote computing,whilst cheap and effective hardware and software support systems provide readily usable platforms on which to build remote multi-disciplinary design practices where the exploitation of specialistknowledge and skills is not limited by traditional methods of communication. ISDN networks allow real time video, voice and design software interaction - indeed, everything except the designer's physical presence. However as with all computer technology and indeed communications technology the user interface which gives access and control is vitally important. The user interface should provide the following features: be transparent to the user and simple and reliable to operate; allow an interactive window/s into the remote site's design information whatever the type of application being dealt with; carry out data compression, file transfer and file management procedures with minimum input from the user; cause no conflicts with design software or secondary applications;be able to access different platforms.
series	DDSS
last changed	2003/08/07 16:36

_id	778e
authors	Gann, D.
year	1994
title	Archaeological Site Reconstruction With AutoDesk's 3D Studio
source	CSA Newsletter Vol 7:3 Nov 1994
summary	3D Studio is an IBM-compatible computer modeling program that enables users to create three-dimensional renderings of a variety of objects. In its ability to import a wide variety of maps and other images, 3D Studio allows for the realistic rendering of models created within AutoCAD or other 3D CAD packages. Over the past year, the Homol'ovi research program has been utilizing this software to create near photo-realistic renderings of conjectural site models. My own interests in three-dimensional computer modeling developed out of work at the site of Homol'ovi IV, a 150-room pueblo site located near Winslow, Arizona. The site was situated upon a steep 30-meter bluff with a bedrock cap. Approximately 24 rooms were located on top of the bedrock cap, with another 125 rooms situated on the slope of the butte. During the 1989 field season five structures were excavated, while a separate crew worked clearing and mapping the tops of walls. Mapping was accomplished with a Topcon EDM/theodolite station, and a standard map was created from this process. (See Fig. 3.) While the map was sufficient to show the general layout of the site, I remained unsatisfied; a 2D plan view simply did not convey the vertical dimension of the pueblo. At this point the Homol'ovi Research Program purchased a copy of AutoCAD in order to begin exploring three-dimensional mapping and modeling.
series	other
last changed	2003/04/23 15:50

For more results click below: