Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 362

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8fb2
id	8fb2
authors	McCall, Raymond, Bennett, Patrick and Johnson, Erik
year	1994
title	An Overview of the PHIDIAS II HyperCAD System
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 63-74
doi	https://doi.org/10.52842/conf.acadia.1994.063
summary	The PHIDIAS II HyperCAD system combines the functionality of CAD graphics, hypermedia, database management and knowledge-based computation in a single, highly integrated design environment. The CAD functionality includes both 3-D and 2-D vector graphics. The hypermedia includes support for text, raster images, video and sound. The database management enables persistent storage and interlinking of large collections of text, images, video, sound and vector graphics, i.e., thousands of vector graphic objects and drawings in a single database. Retrieval is provided both through use of "associative indexing" based on hyperlinks and through use of an advanced query language. The knowledge- based computation includes both inference and knowledgebased critiquing. A highly unusual feature of PHIDIAS II is that it implements all of its functions using only hypermedia mechanisms. Complex vector graphic drawings and objects are represented as composite hypermedia nodes. Inference and critiquing are implemented through use of what are known as virtual structures [Halasz 1988], including virtual links and virtual nodes. These nodes and links are dynamic (computed) rather than static (constant). They are defined as expressions in the same language used for queries and are computed at display time. The implementation of different kinds of functions using a common set of mechanisms makes it easy to use them in combination, thus further augmenting the system's functionality. PHIDIAS supports design by informing architects as they develop a solution's form. The idea is thus not to make the design process faster or cheaper but rather to improve the quality of the things designed. We believe that architects can create better buildings for their users if they have better information. This includes information about buildings of given types, user populations, historical and modern precedents, local site and climate conditions, the urban and natural context and its historical development, as well as local, state and federal regulations.
series	ACADIA
last changed	2022/06/07 07:59

_id	4604
authors	Laveau, S. and Faugeras, O.
year	1994
title	3D Scene Representation as a Collection of Images and Fundamental Matrices
source	INRIA Report
summary	The problem we solve in this paper is the following. Suppose we are given N views of a static scene obtained from different viewpoints, perhaps with different cameras. These viewpoints we call reference viewpoints since they are all we know of the scene. We would like to decide if it is possible to predict ano- ther view of the scene taken by a camera from a viewpoint which is arbitrary and a priori di erent from all the reference viewpoints. One method for doing this would be to use these viewpoints to construct a three-dimensional repre- sentation of the scene and reproject this representation on the retinal plane of the virtual camera. In order to achieve this goal, we would have to establish some sort of calibration of our system of cameras, fuse the three-dimensional representations obtained from, say, pairs of cameras thereby obtaining a set of 3-D points, the scene. We would then have to approximate this set of points by surfaces, a segmentation problem which is still mostly unsolved, and then intersect the optical rays from the virtual camera with these sur- faces. This is the most straightforward way of going from a set of images to a new image using the current computer vision paradigm of rst building a three-dimensional representation of the environment from which the rest is derived. We do not claim that there does not exist any simpler way of using the three-dimensional representation than the one we just sketched, but this is just simply not our point. Our point is that it is possible to avoid entirely the explicit three-dimensional reconstruction process: the scene is represented by its images and by some ba- sically linear relations that govern the way points can be put in correspondence between views when they are the images of the same scene-point. These images and their algebraic relations are all we need for predicting a new image. This approach is similar in spirit to the one that has been used in trinocular stereo. Hypotheses of correspondences between two of the images are used to predict features in the third. These predictions can then be checked to validate or inva- lidate the initial correspondence. This approach has proved to be quite e cient and accurate. Related to these ideas are those develo- ped in the photogrammetric community under the name of transfer methods which nd for one or more image points in a given image set, the corresponding points in some new image set.
series	report
last changed	2003/04/23 15:50

_id	7475
authors	Laurel, B., Strickland, R. and Tow, R.
year	1994
title	Placeholder: Landscape and Narrative In Virtual Environments
source	ACM Computer Graphics Quarterly Volume 28 Number 2 May
summary	The idea of using virtual reality for entertainment purposes is actually quite recent in the history of VR technology. Early VR entertainment applications, appearing in the late 1980s, were extensions of the existing "serious" application of flight simulation training. The other branch of flight - simulator technology - motion platforms used in synchronization with motion video or animation - was much more amenable to the theme park environment. These systems, of which Star Tours is the best known, trade off individual viewpoint control and the sense of agency for thrilling, finely calibrated effects and the optimization of "throughput" - that is, getting the most people through the ride in the least time. Second to motion-platform rides in this regard are networked pods, as used in Virtual World Entertainment systems (previously Battletech). "Classic" virtual reality, with head-mounted displays and various forms of body tracking, are especially problematic in theme park environments for several reasons. It takes time to get the gear onto the participants. Only a handful of people can experience the attraction simultaneously (although a much larger audience might watch what the people "inside" the VR are doing). A hard-driving plot with distinct beginning, middle, and end is a great way to control how long an experience takes, but "classic" VR is inimical to this kind of authorial control - it works best when people can move about and do things in virtual environments in a relatively unconstrained way.
series	journal paper
last changed	2003/04/23 15:50

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4f23
authors	Dieberger, Andreas
year	1994
title	Navigation in Spatial Information Environments: User Interface Design Issues for Hypertext and VR Systems Posters
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994
summary	The Information City project (presented in a poster at Hypertext 93) uses the spatial user interface metaphor of a city to organize and navigate large collections of hypertextual information. As we are used to navigate real life cities the city metaphor -- enriched with magic features -- should help to navigate information structures. A first implementation of the Information City was started in a MUD system. MUDs are networked multi-user text-adventure games which usually make use of a house / city metaphor. MUDs are conceptually similar to hypertext systems and navigational findings in those systems are therefore relevant also to hypertext. While implementing the first parts of the city research into navigation in MUDs was found necessary. This poster presents some results of this navigational study and describes how knowledge in the domains of architecture and city-planning can be used to design an easy to navigate virtual city. Highlights of the results concern magic features and collaboration. Magic features extend the spatial metaphor beyond typical properties of space. An example is the hypertext link which allows tunneling through the spatial structure. Other results concern the richness of spaces (or space-descriptions) and communication between users. It seems the chief benefit of the spatial metaphor of the city is in communication about spatial relationships of information. The findings probably are valuable in designing any information system using spatial metaphors. They are especially useful for hypertext systems realized in some virtual environment -- be it a MUD or an immerse virtual reality system.
series	other
last changed	2002/07/07 16:01

_id	cf2009_585
id	cf2009_585
authors	E. Swarts, Matthew; A. Sheward, Hugo
year	2009
title	Using multi-level virtual environments as a medium for conducting design review through a shared IFC dataset
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 585- 597
summary	For a long time the Architecture-Engineering-Construction (AEC) community has had difficulty in communicating the content of their work, not only the various specialties involved, but also to their clients. Studies (Doorst and Cross 2001; Bakhtin 1994) suggest the importance of multi-role collaborative environments in supporting design processes. We are developing a Multi Level Design Review Tool for the AEC industry which allows multiple actors to congregate and interact as agents around a central Building Model. It merges real-time virtual 3D visualization technologies with Industry Foundation Classes (IFC) to support both high levels of semantic content and seamless interoperability.
keywords	Design review, virtual environment, interoperability
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9442
id	ddss9442
authors	Hensen, Jan
year	1994
title	Energy Related Design Decisions Deserve Simulation Approach
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Building energy consumption and indoor climate result from complex dynamic thermal interactions between outdoor environment, building structure, heating, ventilating and air-conditioning (HVAC) system and occupants. Apart from a few trivial relations, this reality is too complicated to be casted in simple expressions, rules or graphs. As shown in a previous paper, there are now tools available - in the form of computer simulation systems - which treat the building and plant as an integrated, dynamic system. It is argued that these can and should be used in the context of design decision support and design evaluation related to thermal energy. The paper will give ageneral overview of building energy design tools which range from simplified design tools (SDT's) to comprehensive modelling and simulation systems. It will be demonstrated why SDT's are very limited in scope and range of applicability. With respect to building energy simulation the paper will compare simplified models with comprehensive models in terms of ressource needs, applicability etc. In view of the risk involved when using SDT´s or simplified models, the paper strongly promotes the use of comprehensive tools in combination with emerging intelligent front ends. The message ofthe paper will be: let the machine do the work.
series	DDSS
email
last changed	2003/08/07 16:36

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	c4ae
id	c4ae
authors	Knapp, Robert W. and McCall, Raymond
year	1996
title	PHIDIAS II - In Support of Collaborative Design
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 147-154
doi	https://doi.org/10.52842/conf.acadia.1996.147
summary	The World Wide Web in combination with Java and Virtual Reality Modeling Language (VRML) create great opportunities for collaboration by distributed design teams. To take advantage of these opportunities, we have begun to create a version of the PHIDIAS hyperCAD system (McCall, Bennett and Johnson 1994) that will support communication and collaboration among designers over the Word Wide Web. PHIDIAS is an intelligent, hypermedia-based system for computer-aided design. Our strategy is to divide PHIDIAS into two parts: 1) a client-side user interface and 2) a server-side hyperCAD database engine. The client-side interface is being implemented using Java and VRML. Implementing the PHIDIAS front-end with Java enables program code distribution via the World Wide Web. VRML provides PHIDIAS with client-side computation and display of 3D graphics.
series	ACADIA
last changed	2022/06/07 07:51

_id	2647
authors	Koutamanis, Alexander
year	1994
title	Sun and Time in the Built Environment
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 248
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f4j
summary	At a time when requirements on the quality of the built environment are increasingly becoming explicit and specific, computer technology promises the ability to analyse and evaluate buildings during the design process. The computer can extract the necessary information from conventional geometric representations, generate comprehensive descriptions of the aspects to be analysed and use these to arrive at precise and accurate results that can be represented visually. Visual representations facilitate comprehension of the analyses and of their results because of their agreement with our predominantly visual perception of the built environment. The consequent close correspondences between geometric design representations and the visual representation of analyses and evaluations allow direct correlation of the results with the design as a whole. Such correlation is instrumental for imposing explicit and justifiable constraints on the further development of a design. One good example of visual analyses is daylighting. In many drafting and modelling programs a viewing point can be set on the basis the sun’s height and azimuth. The projection returned reveals the surfaces that are directly lit by the sun. In other programs the sun’s height and azimuth can be used to position a light source with parallel rays. This source gives rise to shading and shadows that correspond to the ones produced by the sun. In addition, several programs can calculate the position of the sun and hence the viewing point or the light source on the basis of the date, the time and the geographic coordinates of the place. The availability of computer-aided daylighting analysis has obvious advantages for practice. Efficiency and reliability of the analysis increase, while flexibility is superior to analog simulations. Unfortunately automation of daylighting analysis may also impede understanding of underlying principles, that is, of the issues at the focus of architectural education. Explaining how the analysis is performed and why becomes thus a necessity for computer-aided design education. Exercises that aim at more than just learning and using a computer program can enrich the student’s understanding of the analysis and its results. The efficiency and flexibility of the computer facilitate the study of aspects such as the comparison of local apparent time, local mean time, standard time and daylight saving time and their significance for daylighting, solar heating and cooling patterns and possibilities. Sundials with their explicit correspondence to solar movement can be instrumental in this respect. The efficiency and flexibility of the computer also support the investigation of the techniques by which the daylighting analysis is performed and explain the relationships between projective theory, sciagraphy and computer graphics. A better understanding of the principles and techniques for daylighting analysis has a generally positive influence on the students’ learning of the daylighting analysis software and more significantly on their correlation of daylighting constraints with their designs. This leads in turn to increased flexibility and adaptability of the designs with respect to daylighting and to a conscious and meaningful exploration of variations and alternative solutions.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	051a
authors	Ng, Edward and Mori, Stefano
year	1994
title	The Electronic Hartlib Project
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 108-114
doi	https://doi.org/10.52842/conf.ecaade.1994.108
summary	One of the many criticisms of early efforts in multimedia based teaching, learning and information systems is that most of the development is focused on constructing closed systems, and that once they are completed, altering their content, especially by third party users, is next to impossible. This leads to two problems. Firstly, in the current funding environment, it is almost impossible to sustain the system. Secondly, the system thereby developed is not very flexible and hence can be difficult to use. In Sheffield, we are trying to address this problem by constructing an open system. Using an interface-less data structuring system, an object oriented technique has been developed to separate the interface from the generic files thereby allowing unlimited posthumous alteration and adaptation. A prototype has been developed in Hypercard and in Director, but the beauty of the system is that it can be adapted to run on almost anything.
series	eCAADe
last changed	2022/06/07 07:58

_id	ddss9480
id	ddss9480
authors	Schipper, Roel and Augenbroe, Godfried
year	1994
title	An Information Model of Energy Performance in Early Building Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design is a creative and dynamic process. The level to which a future generation of Intelligent Integrated Building Design Systems will be able to support this process depends on the power of the underlying conceptual models to cover the semantics of design. In the definition of generic building models, the concept of constraints appears to be a powerful means to formalize those semantics. Both design performance goals, and rules and relations in design composition can be described as constraints. The Engineering Data Model (EDM), recently developed at UCLA, acknowledges this fact. It allows the formal definition of object oriented building models, using constraints as the central concept for describing relations. This paper will discuss the development of an EDM building model for the integrated design for energy performance, and the implementa-tion of this model in a small prototype system. We will specifically deal with modelling informati-on in the early design stages. This information typically consists of multiple global design alternatives on one hand, and a wide range of conflicting design goals on the other hand. In the paper, it is demonstrated that integration of these conflicting views on building performance in one coherent model is the key to obtaining an optimal design result. Using the Dutch building codes for energy performance (NEN 2916) as an example of design goals, the concepts and relations of these building codes were translated to a formal EDM model. A small shell was built on top of this computer-interpretable model, to demonstrate the useability of the model during the solving of a concrete design problem. It is shown that the EDM building model is able to provide the designer with integrated information through combining different sets of performance constraints and design alternatives in one environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9482
id	ddss9482
authors	Schmitt, Gerhard N.
year	1994
title	Interaction with Architectural Cases in a Virtual Design Environment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The prime business of architecture is change through design. While most architects will welcome any tool which supports this activity with minimal effort, they will not embrace a tool which either seems to automate design or requires major efforts to understand and use. Conventional databases - be it in the form of books or computer applications - are normally in a serving function to support the activity of design and to provide reference. Visual databases have a long history in architecture in the form of drawings, photographs and, more recently, computer-captu-red or computer-generated images. Whereas the first computer-based image libraries closely followed the existing paradigm of existing paper-based libraries, new developments both in software and in computing media offer different opportunities. Knowledge-based and case-based descriptions of architectural features increasingly replace the traditional, passive representations. While in the past these images were subject to more or less random interpretations, the new computer-based images are only one representation of a model which includes many other aspects. The visual aspects of a building are thus no longer restricted to the finished drawing, but new representations of the abstractions of a building become possible. True and direct interaction with visually presented objects thus becomes a reality. The paper presents a prototype of a visual database in a virtual design environment in its critical aspects: (i) the architectural content and representation of such a database and the criteria for the cases in it, (ii) the enabling computing and software environment, and (iii) three practical applications. The prototype is presently being implemented in the Architectural Space Laboratory (ASL) in the Department of Architecture at ETh Zurich.
series	DDSS
email
last changed	2003/08/07 16:36

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
doi	https://doi.org/10.52842/conf.ecaade.1994.060
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

_id	95b3
authors	Wernecke, J.
year	1994
title	The Inventor Mentor: programming Object-oriented 3D graphics with Open Inventor
source	Release 2 Addison Wesley
summary	The Inventor Mentor introduces graphics programmers and application developers to Open Inventor, an object-oriented 3D toolkit. Open Inventor is a library of objects and methods used for interactive 3D graphics. Although it is written in C++, Open Inventor also includes C bindings. For the sake of brevity, the examples included in this book are in C++. All C++ examples, as well as equivalent examples written in C, are available on-line. If you are new to the C++ language, see Appendix A, "An Introduction to Object-Oriented Programming for C Programmers," to help you understand the references to classes, subclasses, and other object-oriented concepts used throughout this book. If you are using the C application programming interface, also see Appendix B, "An Introduction to the C API." This book describes how to write applications using the Open Inventor toolkit. The Inventor Toolmaker, a companion book for the advanced programmer, describes how to create new Inventor classes and how to customize existing classes. The Inventor Mentor contains the following chapters: * Chapter 1, "Overview," provides a general description of Open Inventor concepts and classes and how Inventor relates to OpenGL and the X Window System. * Chapter 2, "An Inventor Sampler," presents a short program that creates a simple object. This program is then modified to show the use of important Inventor objects: engines, manipulators, and components. * Chapter 3, "Nodes and Groups," introduces the concept of a scene graph and shows how to create nodes and combine them into different kinds of groups. * Chapter 4, "Cameras and Lights," describes the camera nodes used to view a scene and the light nodes that provide illumination. * Chapter 5, "Shapes, Properties, and Binding," describes how to create both simple and complex shapes and how to use property nodes, including material, draw style, and lighting model nodes. Binding materials and surface normals to shape nodes is also explained. * Chapter 6, "Text," shows the use of 2D and 3D text nodes. * Chapter 7, "Textures," describes how to apply textures to the surfaces of objects in a scene. * Chapter 8, "Curves and Surfaces," explains how to use NURBS curves and surfaces. * Chapter 9, "Applying Actions," describes how operations are applied to an Inventor scene graph. Actions include OpenGL rendering, picking, calculating a bounding box, calculating a transformation matrix, writing to a file, and searching the scene graph for certain types of nodes. * Chapter 10, "Handling Events and Selection," explains how Inventor receives events from the window system. It also describes how the selection node manages a selection list and performs highlighting. * Chapter 11, "File Format," describes Inventor's interchange file format, used for reading files into Inventor, writing files out from Inventor, and data exchanges such as copy and paste. * Chapter 12, "Sensors," describes how Inventor sensors watch for certain types of events and invoke user-supplied callback functions when these events occur. * Chapter 13, "Engines," describes how you can use Inventor engines to animate parts of a scene graph, or to create interdependencies among the nodes in the graph. * Chapter 14, "Node Kits," introduces node kits, a convenient mechanism for creating groups of related Inventor nodes. Each node kit contains a catalog of nodes from which you select the desired nodes. * Chapter 15, "Draggers and Manipulators," describes how to use draggers and manipulators, which are special objects in the scene graph that respond to user events. Manipulators are nodes with field values that can be edited directly by the user. * Chapter 16, "Inventor Component Library," shows how to use Inventor's Xt components, which are program modules with a built-in user interface for changing the scene graph interactively. It also Chapter 17, "Using Inventor with OpenGL," discusses how to use Inventor with the OpenGL Library.
series	other
last changed	2003/04/23 15:14

_id	2638
authors	Choi, Jin Won
year	1994
title	ArchiWAIS: A Multimedia-Based Architectural Information System for Teaching and Learning Architectural History and Theory
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 161-169
doi	https://doi.org/10.52842/conf.acadia.1994.161
summary	Currently, there is a debate among architectural educators regarding the use of computers in the curricula. At present, computers are used for design purposes, and there is limited use in other areas of the curricula. This paper explores an instructional tool developed specifically for the teaching and learning of architectural history and theory, and since these courses are main components of any architectural curricula, using this tool can have a great impact on architectural education in general. The tool, called ArchiWAIS, is a multimedia-based architectural information system that utilizes emerging computer technologies such as multimedia, hypermedia, and telecommunications. As a multimedia system ArchiWAIS provides effective ways of handling various architectural media-text, images, architectural drawings and diagrams, three-dimensional models, animation and sound. ArchiWAIS as a distributed hypermedia system also provides multiple ways to search multimedia databases and browse through multimedia. ArchiWAIS is a WAIS (Wide-Area Information Server) client and has access to architectural databases specially constructed for this experimental project as well as general WAIS databases. ArchiWAIS is one of two subsystems of ArchiTOUR, an educational system currently under development. While ArchiWAIS searches and collects a variety of architectural information, HyperTOUR, the other subsystem of ArchiTOUR, can be used for presenting and learning a specific subject in architectural history and theory. A future extension of ArchiTOUR will be the integration of other curricula into the system, in essence, creating a common ground among architectural courses.
series	ACADIA
last changed	2022/06/07 07:56

_id	6f6a
authors	Lyons, Arthur and Doidge, Charles
year	1994
title	The Animation of Dynamic Architecture
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 233
doi	https://doi.org/10.52842/conf.ecaade.1994.x.q6a
summary	The most valuable resource in education is student time and the greatest asset is the ingenuity of student minds. CAD technology now offers enormous potential to education, but limitations in time and funding, prevent its use to the extent possible within practice. Therefore, after dealing with 'awareness', 'attitude' and 'limited applications', our most important role in education is to encourage innovation. The third year of the honours option course at De Montfort University takes this as its theme and challenges students to explore and exploit innovative applications. One particular area of development has been exploring the dynamic aspects of architectural design which go much further than the well-established 'fly-through' sequences. A great deal of architectural design and design development depends upon dynamic issues which range from movement joints to construction sequence. A visual understanding of these dynamic issues drawn from appropriate computer animations can now be an effective factor in design.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: