Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 358

Reformat results as: short short into frame detailed detailed into frame

_id	0574
authors	Alison Murison and James Gray
year	1994
title	Spatial Analysis for Museum Design
doi	https://doi.org/10.52842/conf.ecaade.1994.201
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 201-206
summary	The paper describes how a specially written customisation of AutoCAD enables students of Architecture to use the method of spatial analysis called Space Syntax developed by Professor Bill Hillier of the Bartlett School of Architecture, London, to examine a number of existing museums, to compare the findings against other criteria, and to draw conclusions about the strategy adopted in museum design. Simple interactive graphics enable plans to be entered and compared, so that they may be evaluated during the design process, with decisions supported by objective tests. This improves both design decisions and the learning process.
series	eCAADe
last changed	2022/06/07 07:54

_id	ddss9416
id	ddss9416
authors	Campbell, Noel and O'Reilly, Thomas
year	1994
title	GIS: Science or Tool - The Built Environment Perspective
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper attempts to locate GIS in the context of the built environment professions, rather than in the context of computer science, recognizing the integrated but limiting approach of viewingGIS from a strictly computer / spatial science perspective. The paper reviews the conflicts and tensions appearing in the GIS debate seeing them as reflecting the differences between the perceptions and interests of software developers and those of the professions. The "spatial science versus professional tool" dilemma is therefore critically assessed. Science is identified as the dominant paradigm within which GIS development has taken place. This encompasses the emphasis on GIS as spatial science; the interest in particular forms of spatial analysis; a narrow approach to the idea of information; the debate about the appropriate emphasis on the location for GIS in undergraduate education. The interests and activities of the professions cannot be encompassed within the pre-existing science paradigm. The paper identifies the interest the professions have had in broad geographical issues (as distinct from narrow spatial issues). It recognizes the different conventions and procedures used in recording and using geographical information, not all of them objective or scientific. It views the computer, not as a "scientific engine", but as a modern medium for representing and analyzing information. This includes storage and analysis, both internally (algorithmic manipulation) and outside (qualitative manipulation, beyond formal -"computer"- logic). This approach suggests a framework for research of a nature more sympathetic to the needs of the built environment professions in particular and an agenda which would include an examination of: (i) the conventions and procedures used in the professions to collect, store and process information and how these translate to computer technology; (ii) the types of software used and the way procedures may be accommodated by combining and integrating packages; (iii) the dynamism of GIS development (terms such as "dedicated", "mainframe", "PC-based", "distributed", "pseudo-", etc. are identified as indicativeof the need for professions-based approaches to GIS development); (iv) a critique of "information" (modelling of information flows within the professions, may yield valuable insights into the (modelling of information flows within the professions , may yield valuable insights into the similarity of requirements for a variety of "workplace scenarios").
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9422
id	ddss9422
authors	Daru, Roel and Snijder, Philip
year	1994
title	Sketch-Trigger: A Specification for a Form Generator and Design Analysis Toolbox for Architectural Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In order to develop design and decision support techniques in the early sketch design phases, weshould (1) experience and (2) observe real behaviour in practice, (3) transform observations intoideas for improvement, (4) develop behaviour models to explain the sketch design activities and(5) to evaluate between the proposals, (6) decide between the alternatives, (7) implement theselected option in a supporting tool. Our paper reports about the results of step 3 in particular inthe first phase of a Ph D project, started this year. Our main objective is to amplify the effects ofthe sketch as a very effective instrument to generate original forms and to stimulate the mind to discover new shapes and meanings in the roughly sketched patterns. Instead of considering the sketch only as a representation of what the designer has in mind as is usually assumed in CAD systems, we see sketching as form activation. Thus, we want also to offer triggering images to spark off the imagination of the designer while generating images which are practically impossibleto create by hand and certainly not at short notice. The main improvement proposed is the use of an evolutionary form breeding system: one or more sketched parent images (either ready-made'partis' or basic schemes drafted by the designer) presented in the centre of the screen, will generate surrounding mutated children as defined at random but constrained by default or customization of the available transformations. By selecting one or more children a next generation will be produced in the same way. At all times the designer can introduce or reduce constraints. To complete the usually offered 'classical' symmetrical, spatial and logical operations,we want to introduce dis-functional operations like dislocation, explosion, deformation, anti-logic etc, in short all kinds of antagonistic operations, among them the transformations applied indeconstructionist and post-modern design. Our expectation is that these operations will correspond roughly to the 'move' pertaining to a design entity as the operational unit most appropriate for design behaviour research, in particular the analysis of the chunking and parsing behaviour of the designer. The applicability of the 'move' approach has been shown experimentally by Habraken and others. Goldschmidt has abandoned the usual typology approach of protocolanalysis based on moves and concentrated on the linking of moves, but has been hampered by the lack of a good representational instrument. This brings us to the representation of moves and linkages as a research instrument. The 'linkograph' approach as proposed by Goldschmidt is a first step towards a graphical representation of the designers associative reasoning mode, necessary for tracking the heuristics of designers at the most basic level, but its practical implementation remained as yet incredibly laborious. What is proposed here is an instrument and approach which makes such registration and analysis possible within a structured software environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9427
id	ddss9427
authors	Engelen, Guy and White, Roger
year	1994
title	A Strategic Planning and Policy Decision Support Tool for Urban Regions
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper we present a Decision Support System developed to assist urban designers, planners and policy makers to explore and evaluate possible urban layouts and their growth patterns. Thecore of the system consists of a modelling shell allowing the user to specify cellular automata based models of urban and regional systems. These models capture the effect of local spatial processes in which the use, or desired use of each parcel or cell of land is determined partly by institutional and environmental factors, and partly by the activities present in its neighbourhood. Since each cell affects every other cell within its neighbourhood, a complex dynamic emerges. Unlike conventional cellular automata, the models are defined with a large neighbourhood --over a hundred cells-- a relatively large number of states --more than a dozen in some applications-- representing socio-economic and natural land-uses. The approach permits the straightforward integration of detailed physical, environmental, and institutional constraints, as well as including the effects of the transportation and communication infrastructure. These models thus permit a very detailed representation of evolving spatial systems. The current version of the system represents urban areas as consisting of up to 10.000 interacting zones, each roughly the size of an individual city block. These models are easy to build and apply, yet empirical tests show that they produce realistic simulations of urban land use dynamics. Consequently, they are well suited to form the heart of the DSS, which provides the user with a number of tools for exploration,analysis and evaluation of alternative futures of the system as they result from policy interventions that are imposed by means of what-if experiments and scenario analysis. For example, the DSS isable to identify areas in which pressure for change in land use restrictions may become critical under particular development strategies. In the DSS, the modelling shell is coupled to a simple,custom-built GIS. In the stand-alone application of the DSS, this stores the detailed geographical qualities of the area being modelled, and allows basic overlay manipulations. It also displays theresults of the model while the simulation proceeds. Alternatively, the GIS can serve as aninterface to more elaborate, commercial GIS systems.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ecaade2021_103
id	ecaade2021_103
authors	Hussein, Hussein E. M., Agkathidis, Asterios and Kronenburg, Robert
year	2021
title	Towards a Free-form Transformable Structure - A critical review for the attempts of developing reconfigurable structures that can deliver variable free-form geometries
doi	https://doi.org/10.52842/conf.ecaade.2021.2.381
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 381-390
summary	In continuation of our previous research (Hussein, et al., 2017), this paper examines the kinetic transformable spatial-bar structures that can alter their forms from any free-form geometry to another, which can be named as Free-form transformable structures (FFTS). Since 1994, some precedents have been proposed FFTS for many applications such as controlling solar gain, providing interactive kinetic forms, and control the users' movement within architectural/urban spaces. This research includes a comparative analysis and a critical review of eight FFTS precedents, which revealed some design and technical considerations, issues, and design and evaluation challenges due to the FFTS ability to deliver infinite unpredictable form variations. Additionally, this research presents our novel algorithmic framework to design and evaluate the infinite form variations of FFTS and an actuated prototype that achieved the required movement. The findings of this study revealed some significant design and technical challenges and limitations that require further research work.
keywords	Kinetic transformable structures; finite element analysis; form-finding; deployable structures; Grasshopper 3D; Karamba 3D
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a887
authors	Kaplan, Nancy and Moulthrop, Stuart
year	1994
title	Where No Mind Has Gone Before: Ontological Design for Virtual Spaces Papers
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994 pp. 206-216
summary	Hypermedia designers have tried to move beyond the directed graph concept, which defines hypermedia structures as aggregations of nodes and links. A substantial body of work attempts to describe hypertexts in terms of extended or global spaces. According to this approach, nodes and links acquire meaning in relation to the space in which they are deployed. Some theory of space thus becomes essential for any advance in hypermedia design; but the type of space implied by electronic information systems, from hyperdocuments to "consensual hallucinations," requires careful analysis. Familiar metaphors drawn from physics, architecture, and everyday experience have only limited descriptive or explanatory value for this type of space. As theorists of virtual reality point out, new information systems demand an internal rather than an external perspective. This shift demands a more sophisticated approach to hypermedia space, one that accounts both for stable design properties (architectonic space) and for unforeseen outcomes, or what Winograd and Flores call "breakdowns." Following Wexelblat in cyberspace theory and Dillon, McKnight, and Richardson in hypermedia theory, we call the domain of these outcomes semantic space. In two thought experiments, or brief exercises in interface design, we attempt to reconcile these divergent notions of space within the conceptual system of hypermedia.
keywords	Spatial Hypertext; Interface Design; Information Mapping; Navigation
series	other
last changed	2002/07/07 16:01

_id	ddss9450
id	ddss9450
authors	Kohsaka, Hiroyuki
year	1994
title	Spatial Decision Support System for Retail Activity
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This presentation proposes an architecture of Spatial Support System (SDSS) for retail activity. This SDSS is made up of four key modules: data, monitoring, spatial analysis/modelling, and map and report generators. In the data module, spatial shopping data are gathered from Point of Sales (POS) Systems as well as trade area surveys. Two examples will be presented to collect spatial shopping data. One is from an ordinal trade area survey and the other is from point IC cards. The monitoring module can represent retail trade areas as three-dimensional surfaces as well as contour maps by using a colour graphics display after a cartographic analysis which consists of gridding and interpolation of these data. As an application example of monitoring module, retail trade area for a store or a shopping street will be shown as a three-dimensional surface. In addition, themonitoring module can describe a retail structure consisting of the trade area of several retail stores to analyze the spatial competition of them. In the spatial analysis/modelling module, optimization methods search for an optimal location of a new store and an impact analysis assesses the locational impacts of the store upon the existing stores. An optimal location of new supermarket will be solved as an example for this module.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9456
id	ddss9456
authors	Kubiak, Bernard and Korowicki, Antoni
year	1994
title	Identification And Analysis of the Recreational Behaviour Forms and the Needed Recreational Space Using the Integrated Spatial and Object-Oriented Gis: Concepts and Statements
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper is concerned with how to measure and investigate changes in the recreational behaviour and the required recreational space in Polish seaside recreational areas in last few years. Spatial information is an integral part of the identification and analysis of recreational behaviour and required recreational space. We postulate, therefore, that spatial information should be fully incorporated in integrated object-oriented GIS and Decision Support Technology. We argue in this paper that the existing theoretical approaches with their descriptive and technical basis do not offer directions for its application and evaluation. They do not seek to explain the processes undergone by spatial information, nor define appropriate data models. New approaches to GIS use object-oriented structures and expert systems concepts, and they will become increasingly helpful in understanding GIS. It is not unreasonable to expect that the most important issue is to use a data model or object-oriented models which closely represent the user's concept of the geographic object for representing spatial phenomena. We have discovered that most Polish users in this field are unable to collect the data they require directly. Thus they have to use methods and techniques, which cannot be found in GIS such as SWOT analysis. According to our experiences, the identification and analysis of the recreational behaviour and the required recreational space should be defined as a system approach where: (i) recreational space requires an object, (ii) state of recreational space is defined by the set of values of recreational space features, and (iii) the utility of the recreational space is defined by a set of features. The identification and analysis of the recreational behaviour in the presented approach are based on the features/utilities matrix of the recreational space and the computer map. The development of such a system needs many organizational changes. It is shown that in many applications organizational rather than the technical aspects of GIS determine their future and open the way to new spatial analytical techniques.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9458
id	ddss9458
authors	Kurose, Shigeyuki and Hagishima, Satoshi
year	1994
title	A Comparative Analysis of the Road Networks of Premodern Citiesby Using the First Eigenvector of the Transition Matrix
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to propose and test a method for comparing road networks from the view point of pedestrian flows. We constructed a type of spatial interaction model where the shopping trip distributions were determined using a partially doubly-constrained type of model. The method for comparing the road networks is based on this model. The method is as follows. The road networks are represented by nodes and links. Then, P, the probability for a pedestrian to move from node i to nodej is expressed by the following equation: Pij = Wj exp (- ßcij) / Wj exp (-ß Cij)where Cij is the distance between node i and j, W, is a measure of attraction of node), and beta is the distance-decay parameter. We proved that V., the first eigenvector of transition matrix, (Pij), indicates the ratio of pedestrian flows at node i at a steady-state condition. By using the first eigenvector of the transition matrix, road networks can be compared. In this paper, a general method for calculating the first eigenvectors of transition matrices will be described and several road networks of premodern cities in Europe, Middle East and Japan will be compared. The results indicate that the method of comparing pedestrian road networks by using the first eigenvector of the transition matrix is useful.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9467
id	ddss9467
authors	Murison, Alison
year	1994
title	A CAD Interface to Objective Assessment of Design to Support Decision Making in Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The Department of Architecture at Edinburgh College of Art, Heriot Watt University, has an on-going project to create useful implementations of the method of spatial analysis called Space Syntax developed by Prof Bill Hillier at the Bartlett School of Architecture, London. Space Syntax can predict the potential usage of each route through an urban space or large building; some routes will be avoided by most traffic (pedestrian or vehicular), while other routes will become busy thoroughfares. It has been used by Architects and Urban Designers to support proposed developments, whether to show that potential commercial activity ought to be concentrated in an area of high traffic, or to change routes through troubled housing estates, bringing the protection of added traffic to areas previously avoided for fear of mugging. The paper describes how a specially written customized version of AutoCAD enables Post Graduate students of Urban Design and Undergraduate Architecture students to test their designs against the Space Syntax Measures. Simple interactive graphics enable plans to be entered and compared, so that plans may be evaluated during the design process, and decisions supported by objective tests. This improves both design decisions and the learning process, and should be useful to many professionals in urban planning.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9473
id	ddss9473
authors	Peckham, Robert J.
year	1994
title	Geographical Information Systems and Decision Support for Envi-ronmental Management
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The growing requirement for spatial decision support systems in Urban and Regional Management is pointed out. This has come about due to the increasing complexity of modern human activities, the increase in awareness of the negative consequences of mankind's technological development on the environment, and also due to the need to respect new regulations and legislation regarding environmental impacts. Such spatial decision support systems need to manipulate and analyze a wide variety of spatially referenced information, frequently in large quantities. Geographical Information Systems are now the chosen means for supporting such information, but in order to arrive at decisions further analysis modules and decision aids frequently need to be linked to them, or integrated with them. Linking multicriteria decision aid with spatial analysis is one way in which spatially referenced information can be used to arrive at decisions in situations where there are many and conflicting criteria. Examples of applications of these ideas to real management problems, including waste management, river management and site management are used to show how spatial information can now be manipulated to aid decisions, and to arrive at some of the design requirements for more flexible and applicable decision support systems. The merits and disadvantages of several different approaches to design and implementation of decision support systems, especially from the users point of view, are discussed.
series	DDSS
email
last changed	2003/08/07 16:36

_id	6b1d
authors	Porada, Mikhael
year	1994
title	Architectural Briefing Data Representation and Sketch Simulation Computer Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.055
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 55-59
summary	Reflection about the architectural programme starts with the analysis of its writing, its "style" which bears not only the "griffe" of the programmer but as well the structure, methodology, codes of reading, etc. particular to a programming approach. The programme structure corresponds in most cases to the different levels in the text's format and the composition modes of representing data and their relations. The choice made can either facilitate or impede the reading as interpretation of the programme. The programmer’s aim should be to open the text to reading towards a "synthetic schematic" summary, a sort of cognitive threshold which allows the reader to understand both the client's objectives and the designer's intentions enhanced by his experience. Articulating a designer's experience means focusing on his knowhow and memory. The designer's recollected knowledge and heuristic approaches to the solution of a basic design problem - types, his readings and spatial evaluations permanently feed the knowhow. It is important for the architect to have access to past examples, to the collective memory of his workplace, and a repertoire of readings, notes, sketches, influences and citations. It is therfore equally important that a computer environment also have a multimodal "architect's memory" or "project memory" module in which different forms of representation are classified, and made accessible as memory components. It is also necessary to have the possibility to access at any moment in an interactive manner to the recomposition, addition and adaptation of these mnemonic components. The information coming from the programme, classified as descriptive, prescriptive and quantitative types of data, must be able to be interrogated in different modes of representation : text, matrices, nets, diagrams, and so on, so that the pertinent information can be extraded at any given design process stage. Analysis of competition programmes show that often the description of an activity, for example, the Great Stadium competition in Paris, is described by several pages of text, a circulation diagram with arrows and legend, a topological proximity diagram with legend and as table activity - areas . These different representations, which are supposed to be complementary and give the most pertinent view of the client needs, show in fact after analysis, many description problems, incoherance, and which result in a reading difficulty.
series	eCAADe
last changed	2022/06/07 08:00

_id	ddss9497
id	ddss9497
authors	Venemans, P., Daru, R. and Wagenberg, A. van
year	1994
title	Orientation in and Around Large Buildings: Guidelines and Architects
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Wayfinding and orientation problems for visitors of large buildings such as hospitals and offices are still prevalent in spite of a long tradition of research on spatial cognition. Analysis of suchproblems indicates that the characteristics of the building mainly cause these problems. These problems can be prevented by a design tool that aims at improving the orientation of users in large buildings, as changing a building afterwards is often expensive and impractical. As a base for such a design tool, guidelines are derived from the research on wayfinding and orientation. However, guidelines are only part of the solution. This design tool should be structured and presented in a form useful to architectural designers. In order to enhance its usefulness, architects of large public buildings studied a draft version of the tool and were interviewed about: (i) presentation form preferred for the tool and the guidelines, as well as the guideline contents; (ii) the function of the design tool with regard to the architects' design style; (iii) typical design solutions which specifically support or conflict with the guidelines; (iv) possible conflicts resulting from the guideline suggestions, in relation to other goals of the client or the architect. In the paper we discuss the results of the interviews and present our conclusions. We also demonstrate a prototype of the design tool.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9503
id	ddss9503
authors	Wineman, Jean and Serrato, Margaret
year	1994
title	Visual and Spatial Analysis in Office Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The demands for rapid response to complex problems, flexibility, and other characteristics of today's workplace, such as a highly trained work force, have led many organizations to move from strict hierarchical structures to a more flexible project team organization. The organizational structure is broader and flatter, with greater independence given to organizational units, in this case the project teams. To understand the relationship between project team communication patterns and the design and layout of team space, a study was conducted of an architectural office before and after a move to new space. The study involved three project teams. Information was collected on individual communication patterns; perceptions of the ease of communication; and the effectiveness of the design and layout of physical space to support these communications. In order to provide guidance for critical decision-making in design, these communication data were correlated with a series of measures for the specification of team space enclosure and layout. These group/team space measures were adaptations of existing measures of individual work space, and included an enclosure measure, based on an enclosure measure developed by Stokols (1990); a measure of visual field, based on the "isovist" fields of Benedikt (1979); and an "integration" measure, based on the work of Hillier and Hanson (1984). Results indicate both linear and non-linear relationships between interaction patterns and physical space measures. This work is the initial stage of a research program to define a set of specific physical measures to guide the design of supportive work space for project teams and work groups within various types of organizations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	7d6c
authors	Chapin, William L., Lacey, T. and Leifer, Larry
year	1994
title	DesignSpace: A Manual Interaction Environment for Computer Aided Design DEMONSTRATIONS: Virtual Reality Multimedia
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 33-34
summary	DesignSpace is a computer-aided-design (CAD) system that facilitates dexterous manipulation of mechanical design representations. The system consists of an interactive simulation programmed with a seamless extended model of the designer's physical environment and driven with continuous instrumentation of the designer's physical actions. The simulation displays consistent visual and aural images of the virtual environment without occluding the designer's sensation of the physical surroundings. Developed at Stanford University's Center for Design Research (CDR), DesignSpace serves as an experimental testbed for design theory and methodology research. DesignSpace includes significant contributions from recent CDR development projects: TalkingGlove, CutPlane, VirtualHand, TeleSign, and VirtualGrasp. The current DesignSpace prototype provides modeling facility for only crude conceptual design and assembly, but can network multiple systems to share a common virtual space and arbitrate the collaborative interaction. The DesignSpace prototype employs three head-tracked rear projection images, head-coupled binaural audio, hand instrumentation, and electromagnetic position tracking.
keywords	Virtual Environment; Dexterous Manipulation; Interactive Simulation; Presence; Spatial Acoustics; Manual and Gestural Communication; Teleconference; Collaboration
series	other
last changed	2002/07/07 16:01

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9424
id	ddss9424
authors	Dave, Bharat and Schmitt, Gerhard
year	1994
title	Information Systems for Spatial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes a continuing research project aimed at the development of a prototype information system to represent and manipulate models of urban settlements. This inter-disciplinaryproject involves researchers and teachers in the fields of urban design, photogrammetry and CAD. Based upon the requirements identified by the urban design team, the photogrammetry teamused aerial imagery to produce accurate digital models of various features of urban settlements. The models comprise natural features like terrain data, water and vegetation systems, and man made features like transportation networks, land parcels, and built-up volumes. These data are represented in the three dimensions, and they are further linked with nongraphic attributes stored in an external database schemata. The architecture of the system under development has been described previously. In this paper, we focus on the generation of thematic abstractions. The working hypothesis for our current work is that (i) to enable reliable decision-making in urbandesign contexts, we require digital models that are complete and accurate at a certain degree of resolution, and (ii) during various stages in the decision-making, we need useful abstractionswhich encode only the salient information and no more. In more specific terms, we are interested in finding computational means to automatically generate schematic generalizations of data that succinctly represent some information without recomputing or displaying all the vectrs and other details. In this papar we present some of the strategies that we employ to support such operations in our system and also present graphic examples that demonstrate the potential andlimitations of our approach.
series	DDSS
email
last changed	2003/08/07 16:36

_id	4f23
authors	Dieberger, Andreas
year	1994
title	Navigation in Spatial Information Environments: User Interface Design Issues for Hypertext and VR Systems Posters
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994
summary	The Information City project (presented in a poster at Hypertext 93) uses the spatial user interface metaphor of a city to organize and navigate large collections of hypertextual information. As we are used to navigate real life cities the city metaphor -- enriched with magic features -- should help to navigate information structures. A first implementation of the Information City was started in a MUD system. MUDs are networked multi-user text-adventure games which usually make use of a house / city metaphor. MUDs are conceptually similar to hypertext systems and navigational findings in those systems are therefore relevant also to hypertext. While implementing the first parts of the city research into navigation in MUDs was found necessary. This poster presents some results of this navigational study and describes how knowledge in the domains of architecture and city-planning can be used to design an easy to navigate virtual city. Highlights of the results concern magic features and collaboration. Magic features extend the spatial metaphor beyond typical properties of space. An example is the hypertext link which allows tunneling through the spatial structure. Other results concern the richness of spaces (or space-descriptions) and communication between users. It seems the chief benefit of the spatial metaphor of the city is in communication about spatial relationships of information. The findings probably are valuable in designing any information system using spatial metaphors. They are especially useful for hypertext systems realized in some virtual environment -- be it a MUD or an immerse virtual reality system.
series	other
last changed	2002/07/07 16:01

For more results click below: