Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 356

Reformat results as: short short into frame detailed detailed into frame

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss9851
id	ddss9851
authors	Torre, Carmelo and Selicato, Francesco
year	1998
title	Consequences of Interdisciplinary Approaches in the Construction ofKnowledge-Bases
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The character of interdisciplinarity in planning approaches create a new, intriguing, emerging complexity (Funtowitcz and Ravetz, 1994) in problems and in knowledge-structuring of contexts of planning practices. The key-role played by information systems (IS) implicates a re-consideration ofcharacter of knowledge to be used in knowledge-bases. The necessity of considering knowledge domains coming from social, cultural, economical, technical, physical and naturalistic approaches means dealing with different scales of value, with non homogenous parameters. The necessity ofmanaging flexible knowledge rises on the fore as fundamental issue for future information system oriented to supporting decisions. Might information systems be useful in this interdisciplinary approach ? It is necessary to contain in a knowledge-base both quantitative and qualitativeinformation ? Three alternatives are available for a conceptual discussion :the possibility of identify new approaches, in order to develop information systems able in managing new knowledge; the necessity of adding new support systems oriented to manage soft knowledge, to traditionalgeographic information systems (GIS); the possibility of non using support systems coming from a technological vision of problem for nontechnical knowledge (Latouche 1996). The first two paragraphs are due to F. Selicato. The third and the fourth paragraph are due to C. Torre.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9480
id	ddss9480
authors	Schipper, Roel and Augenbroe, Godfried
year	1994
title	An Information Model of Energy Performance in Early Building Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design is a creative and dynamic process. The level to which a future generation of Intelligent Integrated Building Design Systems will be able to support this process depends on the power of the underlying conceptual models to cover the semantics of design. In the definition of generic building models, the concept of constraints appears to be a powerful means to formalize those semantics. Both design performance goals, and rules and relations in design composition can be described as constraints. The Engineering Data Model (EDM), recently developed at UCLA, acknowledges this fact. It allows the formal definition of object oriented building models, using constraints as the central concept for describing relations. This paper will discuss the development of an EDM building model for the integrated design for energy performance, and the implementa-tion of this model in a small prototype system. We will specifically deal with modelling informati-on in the early design stages. This information typically consists of multiple global design alternatives on one hand, and a wide range of conflicting design goals on the other hand. In the paper, it is demonstrated that integration of these conflicting views on building performance in one coherent model is the key to obtaining an optimal design result. Using the Dutch building codes for energy performance (NEN 2916) as an example of design goals, the concepts and relations of these building codes were translated to a formal EDM model. A small shell was built on top of this computer-interpretable model, to demonstrate the useability of the model during the solving of a concrete design problem. It is shown that the EDM building model is able to provide the designer with integrated information through combining different sets of performance constraints and design alternatives in one environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	051a
authors	Ng, Edward and Mori, Stefano
year	1994
title	The Electronic Hartlib Project
doi	https://doi.org/10.52842/conf.ecaade.1994.108
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 108-114
summary	One of the many criticisms of early efforts in multimedia based teaching, learning and information systems is that most of the development is focused on constructing closed systems, and that once they are completed, altering their content, especially by third party users, is next to impossible. This leads to two problems. Firstly, in the current funding environment, it is almost impossible to sustain the system. Secondly, the system thereby developed is not very flexible and hence can be difficult to use. In Sheffield, we are trying to address this problem by constructing an open system. Using an interface-less data structuring system, an object oriented technique has been developed to separate the interface from the generic files thereby allowing unlimited posthumous alteration and adaptation. A prototype has been developed in Hypercard and in Director, but the beauty of the system is that it can be adapted to run on almost anything.
series	eCAADe
last changed	2022/06/07 07:58

_id	ddss9474
id	ddss9474
authors	Pereira, A.G., Munda, G. and Paruccini, M.
year	1994
title	Generating Alternatives For Siting Using Genetic Algorithms and Multiple Criteria Decision Techniques
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is believed that a fundamental step in the structuring of a siting problem is generating alternati-ves. This task should occur at the beginning of a process for facility location, giving a preliminary insight into the feasibility of the project in the area of concern by identifying a manageable number of feasible alternatives for careful review and consideration. The purpose of this paper is to present a methodology aimed at generating alternatives for siting of facilities taking into account a number of criteria. These criteria comprise environmental, economical and the action's inherent technical aspects. The search is carried out by applying genetic algorithms (GA's) which are natural phenomena based algorithms for optimization and random search procedures. According to the GA's terminology, a fitness function measures the worth of each candidate alternative codified into a chromosome. It was thought that the merging of aspects of multiple criteria theory and genetic algorithms is essential for the problem of generating alternatives in location problems. The aim of this integration is the improvement of the theoretical principles upon which the fitness function is based, leading to the construction of a robust set of alternatives. The paper describes the integration of both multiple criteria theory and GA's and discusses the results.
series	DDSS
email
last changed	2003/08/07 16:36

_id	6637
authors	Ward, D., Brown, A.G.P. and Horton, F.F.
year	1994
title	A Design Assistant for Environmental Optimisation of Buildings
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u0s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 247
summary	The dual function of the Environmental Design Assistant which we have developed is to act firstly as a teaching aid and secondly as a design aid. In terms of it's role as a design assistant it is similar in nature to the application described by Papamichael, K, in Novitski, B. J. (1993). However, the work described here forms part of an overall strategy to develop a user friendly design assistant across the spectrum of Architectural design disciplines: this is one particular strand of the project. One aim embodied in the development of the environmental design assistant has been the pragmatic one of the production and refining of a tool to perform environmental assessments of buildings in accordance with the British recommendations made in BREEAM (Building Research Establishment Energy Assessment Method). In this respect the assistant allows for the consequences of design decisions to be readily assessed and then for those decisions to be modified. The Assistant has undergone a series of refinements to make it more user-friendly, efficient and appropriate as an Architectural design aid; and this has been the second aim of the project. The project has acted as a vehicle for the application of design principles applied to the presentation, information structuring and navigation associated with Hypermedia and Multimedia products. We are applying the kind of good design principles which have been summarised well by Schulmeister, R. (1994). These principles include Ariadne's Thread (paths for navigation), Lost in Hyperspace (backward navigation), More-than-browsing (interaction) and Tutoring (providing feedback to the user). Adoption of such principles is, we believe, essential in order to realise the potential of Hypermedia tools. The principal development tool for the work has been SuperCard. This has been used in conjunction with a range of other software including ArchiCad and Intellidraw and a range of image grabbing devices.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9425
id	ddss9425
authors	Deguchi, Atsushi and Hagishima, Satoshi
year	1994
title	Integration System for Urban Design from Planning Management to Visalization
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Advanced tools based on CAD or GIS systems and simulation methods have recently been introduced to support the many aspects of urban planning (design, analysis, evaluation, presentation). This research aims at constructing a system by integrating these support tools and linking GIS and simulation tools. The major purpose of this system are to manage the geographical data base of the target urban area, utilize the digital information of the area for planning and analysis,evaluate the impact of alternative proposals on the physical environment such as sunlight and daylight, visualize the results of analysis, and support the management of urban redevelopment /development projects. This paper shows some applications to illustrate usefulness of the system. These examples are concerned with a contemporary problem in urban planning of Tokyo: redevelopment of low-rise high-density residential districts and high-rise development in the central business districts. Urban redevelopment for the high-density urban areas in Japan requiresa evaluation of alternative plans by visualizing their environmental impact. This system enables the quantitative analysis of the environmental impact by using 3-dimensional geographical data andsimulation methods. In general, the merit and effect of planning support systems are recognized in terms of the "efficiency" of the planning process. The primary function of GIS is thought to bethe unification and management of various pieces of information. In addition, this research indicates the effectiveness of the integrated system in terms of utilizing the geographical information and visualizing the image of the future environment.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9434
id	ddss9434
authors	Grant, M.
year	1994
title	Urban Gis - The Application of the Information Technologies to Urban Management
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many cities in the UK and indeed throughout the developed world are characterised by the all too familiar symptoms of urban blight caused by insensitive intervention in the environment. The common denominator within this class of problem is the lack of a coordinated, integrated approach to the planning, design and maintenance of our cities. The cycle of development and redevelopment calls for input from a diverse range of disciplines relating to architecture, civilengineering, transport engineering, and the management of city utilities. This lack of a common up datable information base renders access to a global view of the city difficult, if not impossible.This problem has provided the motivation to move towards an integrated philosophy regarding information collection, collation and dissemination. The impetus is provided primarily through theincreasing complexity of urban management but also through central governments policy to progress towards decentralisation of services. Fiscal pressure to increase efficiency, lower manpower resources and arrive at speedier judgements all point to an increasing reliance on the information technologies. Current work at ABACUS within Strathclyde University addresses research whose objective is to identify, and then prototype, a relevant urban information system. It is proposed that by attributing a geometrical framework with those physical quantities thatare relevant to the formal and functional evaluation of the urban environment, the means of evaluating the qualities and quantities of the buildings aswell as the social and economic prospects may be realised.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9444
id	ddss9444
authors	Hill, Shauna and Streilein, André
year	1994
title	Architectural Photogrammetry & Knowledge-Base Systems Record & Redevelopment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In redevelopment projects, the purpose of heritage recording is part of an investigative process to achieve understanding about structures so that designers can make the appropriate design decisions. It is desirable to integrate the knowledge of the recording and documentation specialist, who has first-hand knowledge of the building, with the interpretative process of evaluating the building information and making design decisions. New developments in the fields of photogram-metric recording and computer science has led to improved "image understanding". This paper describes research that is the result of exploring the concept of integrating new digital photogram-metric recording processes with an automated expert evaluation tool. The goal of this research is to expedite the acquisition of heritage building information for use by a knowledge-based system capable of providing the designer with building performance evaluations. Photogrammetry records all data as a series of three-dimensional coordinates which make it a natural partner for today's three-dimensional CAD systems. Generating a three-dimensional model of architecturally significant physical forms and details can provide a basis for evaluation, understanding, education, and design. The purpose of knowledge-based systems in construction is to enhance the decision-making process with specialized knowledge and experience. The linkage of CAD databases with knowledge-based systems provides a source of input data, such as a three-dimensional model, significant to a particular problem. This research is a collaborative effort between two groups, the Swiss Federal Institute of Technology in Zurich Switzerland, and the University of Manitoba in Winnipeg, Canada.
series	DDSS
last changed	2003/08/07 16:36

_id	b9c4
authors	Kim, Inhan
year	1994
title	Data representations in an integrated architectural design environment
source	University of Strathclyde, Dept. of Architecture and Building Science
summary	The architectural design process is very complex and involves cross-disciplinary communication among many related fields. Given the further problems arising from the technological advances in building materials and construction methods, an integrated design environment becomes a central design issue. There have been many attempts to analyse and structure the design process as a uniform hierarchical framework. Most of the attempts resulted in a vague and inappropriate outcome due to the lack of understanding of architectural design complexity and inconsistent design data control sequence. A design problem cannot be comprehensively stated because the design problem has a multi-disciplinary nature and the design problem itself evolves as solutions are attempted by the designer. Therefore, an ideal CAAD system should have the capability to accommodate the multi-disciplinary nature of design and should not prescribe or restrict design concepts and design knowledge. A well designed integrated design environment provides more information and invokes creative imagination for each design stage, and therefore creative decision making by the designer can be achieved. This thesis proposes a prototype architectural design environment, Hybrid Integrated Design Environment [HIDE], which aims to integrate all applications for designing a building. Within the object-oriented design environment, a unified data model and a data management system have been implemented to seamlessly connect all applications. Development of the environment needs to consider the fundamental interaction between each module. Devising a data structure that is appropriate to an effective data communication among the various design stages is essential in a totally integrated CAAD system. The suggested unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. By means of the unified data model, integrated CAAD systems could represent and exchange design information at a semantic level, i.e. the user’s way of thinking, such as exchanging components and features of a building rather than graphical primitives. In consequence, the unified data model reduces the misunderstandings and communication problems among the multiple disciplines of architectural design. The suggested data management system supports the consistent and straight forward mechanisms for controlling the data representation through the inter-connected modules. It is responsible for creating, maintaining, and viewing a consistent database of the design description. It also helps to perform effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. To support inter-disciplinary communication of design concepts and decisions, the integrating of relevant CAAD tools is essential. In the environment, the integration of CAAD tools has been performed on the basis of how well computerized design tools can assist designers to develop better solutions, enabling them to manipulate and appraise varying solutions quickly and with a minimum of effort in an environment conducive to creative design. A well designed user interface system can also benefit the seamless working environment. The proposed user friendly interface system allows a user to explore the environment in a highly interactive manner. From the development of the early data model to the final design, a user could benefit from the prototypes and methods of the user interface system. The ultimate goal of the prototype environment is to suggest a future design environment which helps the architect to have minimum discontinuity in his creativity and make the design process similar to the natural design process with the help of a set of design assistance modules. A prototype version of HIDE has been implemented and a demonstration of the environment is part of this thesis.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ab3c
authors	Kramer, G.
year	1996
title	Mapping a Single Data Stream to Multiple Auditory Variables: A Subjective Approach to Creating a Compelling Design
source	Proceedings of the Third International Conferenceon Auditory Display, Santa FO Institute
summary	Representing a single data variable changing in time via sonification, or using that data to control a sound in some way appears to be a simple problem but actually involves a significant degree of subjectivity. This paper is a response to my own focus on specific sonification tasks (Kramer 1990, 1993) (Fitch & Kramer, 1994), on broad theoretical concerns in auditory display (Kramer 1994a, 1994b, 1995), and on the representation of high-dimensional data sets (Kramer 1991a & Kramer & Ellison, 1991b). The design focus of this paper is partly a response to the others who, like myself, have primarily employed single fundamental acoustic variables such as pitch or loudness to represent single data streams. These simple representations have framed three challenges: Behavioral and Cognitive Science-Can sonifications created with complex sounds changing simultaneously in several dimensions facilitate the formation of a stronger internal auditory image, or audiation, than would be produced by simpler sonifications? Human Factors and Applications-Would such a stronger internal image of the data prove to be more useful from the standpoint of conveying information? Technology and Design-How might these richer displays be constructed? This final question serves as a starting point for this paper. After years of cautious sonification research I wanted to explore the creation of more interesting and compelling representations.
series	other
last changed	2003/04/23 15:50

_id	2292
authors	Kühn, Christian and Herzog, Marcus
year	1994
title	On the Role of Hypermedia in Architectural Design Education
doi	https://doi.org/10.52842/conf.ecaade.1994.115
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 115-120
summary	Teaching architectural design is not primarily concerned with presenting a body of knowledge analytically, but rather with influencing the way students act in a design situation. Previous design cases play an important part in this process, as they provide students with sets of objectives and corresponding solution patterns. Nevertheless, one of the main problems with using precedents in the design studio is that students take them rather as models to be copied than as starting points for their own research. To overcome this problem, the representation of design cases has to be improved. Our thesis is that in architectural design the structure of a case base of design precedents relies to a large extent on the various, and often conflicting, interpretations of precedents that are provided by architectural theory and discourse. Within a theory of design where exploration is the dominant strategy, we propose a method of using design cases and design theories in an integrated way. Through the use of hypermedia as a medium for representation of design cases, the process of looking for information can be based on the same metaphor as the design process itself.
series	eCAADe
last changed	2022/06/07 07:52

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6b1d
authors	Porada, Mikhael
year	1994
title	Architectural Briefing Data Representation and Sketch Simulation Computer Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.055
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 55-59
summary	Reflection about the architectural programme starts with the analysis of its writing, its "style" which bears not only the "griffe" of the programmer but as well the structure, methodology, codes of reading, etc. particular to a programming approach. The programme structure corresponds in most cases to the different levels in the text's format and the composition modes of representing data and their relations. The choice made can either facilitate or impede the reading as interpretation of the programme. The programmer’s aim should be to open the text to reading towards a "synthetic schematic" summary, a sort of cognitive threshold which allows the reader to understand both the client's objectives and the designer's intentions enhanced by his experience. Articulating a designer's experience means focusing on his knowhow and memory. The designer's recollected knowledge and heuristic approaches to the solution of a basic design problem - types, his readings and spatial evaluations permanently feed the knowhow. It is important for the architect to have access to past examples, to the collective memory of his workplace, and a repertoire of readings, notes, sketches, influences and citations. It is therfore equally important that a computer environment also have a multimodal "architect's memory" or "project memory" module in which different forms of representation are classified, and made accessible as memory components. It is also necessary to have the possibility to access at any moment in an interactive manner to the recomposition, addition and adaptation of these mnemonic components. The information coming from the programme, classified as descriptive, prescriptive and quantitative types of data, must be able to be interrogated in different modes of representation : text, matrices, nets, diagrams, and so on, so that the pertinent information can be extraded at any given design process stage. Analysis of competition programmes show that often the description of an activity, for example, the Great Stadium competition in Paris, is described by several pages of text, a circulation diagram with arrows and legend, a topological proximity diagram with legend and as table activity - areas . These different representations, which are supposed to be complementary and give the most pertinent view of the client needs, show in fact after analysis, many description problems, incoherance, and which result in a reading difficulty.
series	eCAADe
last changed	2022/06/07 08:00

_id	ddss9477
id	ddss9477
authors	Reuter, Wolf
year	1994
title	Design As Argumentation and Power-Acting - Theory and Methods
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The process of design is seen as the generation, transformation and communication of knowledge in the brains of the professional designers and other persons and groups, who are interested in or concerned by the design output and who would or should participate in the design process. Only if it is known how these kinds of information and communication processes work, computer support is possible. Design thinking follows a microstructural scheme. A steady change of the understan-ding of the problem also changes the sight of the solution and also changes the need for knowled-ge contributing to the solution. In all stages of the design process alternatives or alternative ways of action are generated. The participants communicate about questions feasibility, the distribution of advantages and disadvantages, expected consequences, and other possibilities. They exchange positions and arguments, upon which finally they base their weighting of aspects and their personal judgement. The process of argumentation and evaluation is considered, it can be formalized and supported by formal methods. The decision about a design alternative by different people is not only based on explicit argumentation and/or formal evaluation procedures, but also on the use of power. Different means of power are stated. Some decision making procedures which control the misuse of power, are discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9483
id	ddss9483
authors	Shyi, Gary C.-W. and Huang, Tina S.-T.
year	1994
title	Constructing Three-Dimensional Mental Models from Two-Dimensional Displays
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the present study we adopted the tasks and the experimental procedures used in a recent series of study by Cooper (1990, 1991) for the purpose of examining how we utilized two-dimensional information in a line-drawing of visual objects to construct the corresponding three-dimensional mental structure represented by the 2-D displays. We expected that the stimulus materials we used avoided some of the problems that Cooper's stimuli had, and with that we examined the effect of complexity on the process of constructing 3-D models from 2-D displays. Such a manipulation helps to elucidate the difficulties of solving problems that require spatial abilities. We also investigated whether or not providing information representing an object viewed from different standpoints would affect the construction of the object's 3-D model. Some researchers have argued that 3-D models, once constructed, should be viewer-independent or viewpoint-invariant, while others have suggested that 3-D models are affected by the viewpoint of observation. Data pertinent to this issue are presented and discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	9779
authors	Smeltzer, G.T.A., Mantelers, J.M.M. and Roelen, W.A.H.
year	1994
title	The Application of Virtual Reality Systems in Architectural Design Processes
source	BIT Note Publication 95/1, Building Information Technology, Eindhoven
summary	This publication describes the development and the application of a Virtual Reality system for the architectural design process. It is based on the results of research into Virtual Reality technology and in particular into the possibilities of a natural interface between a designer and a design system. This description is also based on the development of a laboratory set up for a "full immersive" and a "partially immersive" Virtual Reality application. This application offers a designer the possibility of modifying and assessing a 3D design model in "Virtual Reality" and is used in the course of several case studies. One of these case studies was the making of a presentation of a house design to possibly interested parties. The other case study was the use of Virtual Reality in the course of a design process. Finally this publication includes the description of some future and anticipated developments. The research problem is mainly posed by the questions regarding the ways in which the design process changes under the influence of amongst other factors the Virtual Reality technology. Other questions concern the ways in which the interface between a designer and a design system can be made as natural as possible, the way in which a design model can behave as autonomous as possible, and the way in which a representation can be made as realistic as possible. With regard to these the starting points were respectively the use of sensors, the definition of behaviour characteristics and the use of illumination simulations.
series	other
last changed	2003/04/23 15:50

_id	ddss9488
id	ddss9488
authors	Solans, Joan Antoni and Fargas, Josep
year	1994
title	Towards Hybrid Technologies for Urban Design: Balancing Reliability, Power and Speed in Decision Support
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper constructs a theory of decision support system design, based on the three independent concepts of reliability, power and speed borrowed from epistemology. We say that a system is reliable if a large part of its performance is useful or correct, that it is powerful if it performs in a useful way in a variety of situations of interest, and that it is fast if its behaviour is consistently dynamic. An arithmetic calculator, for example, is more reliable than a mathematician, but the latter is more powerful. A programming language is as reliable as a calculator, but the calculator is faster. We use this framework to argue that a successful deployment of decision support technology must take into account the balance between reliability power and speed. We illustrate this approach with the case of a hybrid system for studying urban transportation issues in the Greater Barcelona Region based on land use, contrasting it with more conventional tools such as traditional geographic information systems or traffic analysis software. The hybrid system is shown to sacrifice the reliability and speed characteristic of commercially available software for a powerful set of computational tools developed specifically for the problem at hand. This tradeoff process is formalized using an analysis based on second-order reliability, power and speed concepts. We show that micro-level sacrifices of one of these properties are often inversely correlated with the same characteristics at the macro level. For example, the relatively slow performance of in-house software components on a given project can result in a high level of dynamism in addressing several related projects. We extend the design theory outlined above to a methodology for characterizing decision support systems in general, and argue that the hybrid technologies approach is more likely to result in systems reflecting the user's domain knowledge and skills.
series	DDSS
email
last changed	2003/08/07 16:36

For more results click below: