Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 354

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	4f13
authors	Ronchi, Alfredo M.
year	1994
title	A Brief History of CAAD in Italy
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 227
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f3n
summary	Twenty years of revolution, from the middle '70 to the middle '90. Many things have changed since the origins of computer graphics and computer aided design in architecture. We started teaching drafting on terminals which connected to mini computers, complex procedures or sets of graphics libraries working with keywords, vectors and storage screens. The next step was devoted to the discovery of workstations in the early '80's, where the user sat face on to the whole power of a multitasking system. At that time to use up to 16 time sharing processes running on the same work station seemed to have no practical use at all. Fortunately someone (ie Xerox PARC laboratories) at the same time started to develop the so-called GUI. Graphical user interface started a revolution in human/machine interface (ie Smalltalk). The desktop metaphor, the use of multiple windows and dialogues joined with icons and pop up menus let the user manage more applications and, even more important, created a standard in application/user interface (CUA). In the meantime focus had moved from hardware to software, systems being chosen from the software running. The true revolution we have seen starting from that base and involving an ever increasing number of users was the birth of PC based applications for CAAD. Generally speaking nowadays there are three main technologies concerning teaching: communication, multimedia and virtual reality. The first is the real base for future revolution. In the recent past we have started to learn how to manage information by computers. Now we can start to communicate and share information all over the world in real time. The new age opened by fax, followed by personal communication systems and networks is the entry point for a real revolution. We can work in the virtual office, meet in virtual space and cooperate in workgroups. ATM and ISDN based teleconferencing will provide a real working tool for many. The ever increasing number of e-mail addresses and network connections is carrying us towards the so called 'global village'. The future merger between personal digital assistant and personal communication will be fascinating. Multi & HyperMedia technology is, like a part of VR, a powerful way to share and transfer information in a structured form. We do not need to put things in a serial form removing links because we can transfer knowledge as is. Another interesting and fundamental aspect typical of VR applications is the capability to change cognitive processes from secondary (symbolic - reconstructive) to primary (perceptive - motory). In this way we can learn by direct experience, by experiment as opposed to reading books. All these things will affect not only ways of working but also ways of studying and teaching. Digital communications, multimedia and VR will help students, multimedia titles will provide different kinds of information directly at home using text, images, video clips and sounds. Obviously all those things will not substitute human relationship as a multimedia title does not compete against a book but it helps.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9479
id	ddss9479
authors	Schaefer, Wim F.
year	1994
title	The Management of Knowledge in Architectural Companies by Reconstruction of Problem Solving Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a theory for 'knowledge management' in architectural firms. This theory is based upon the premise that knowledge as well as employees (..the designer as a knowledge worker..) are regarded as means of production and that for both of these resources economic values exist during a limited period of time. Similar to the management efforts to optimize the use of labour and 'material' equipment the use of knowledge should be optimized by adequate management. The presented theory for the management of knowledge introduces a new profession in the organization of an architectural firm: the knowledge manager. And within this context a knowledge base is regarded as a tool to help to perform one of the tasks of this professional. The central part of this theory consists of a cognitive reconstruction of problem solving systems. This reconstruction provides a layout for a knowledge base as well as a 'road map' to guide the discussions on 'what knowledge is used', 'who learned what' and 'to whom must experience be transferred'. Employees as the most 'cognitive actors' in problem-solving in design processes can be traced. The management can decide on wether to emphasise the concentration of knowledge by these persons or to emphasize the transfer of their knowledge to others. The use and meaning of knowledge bases for each of these management approaches are completely different.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9403
id	ddss9403
authors	Arentze, T., Borgers, A., Dellaert, B. and Timmermans, H.
year	1994
title	A Multi-Purpose Multi-Stop Model Describing Consumers' Choices of Shopping Centres
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Recently, a number of interesting extensions to traditional decompositional and discrete choice models has been introduced that allow one to combine parameters estimated in different phases ofcomplex choice processes. These extensions offer new possibilities to model combinations of choices consumers make if they select shopping centres to visit. This paper will introduce a modelling approach that describes consumer choices of shopping centres involving multiple shopping functions (multi purpose) as well as locations (multi stop). The approach extends traditional decompositional models of single choices to a model of combinations of choices. It uses a recursive scaling procedure that combines attributes related to different shopping functions and to shopping centres at different locations. The model will be tested on data collected on shopping behaviour in Maastricht, the Netherlands.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss9419
id	ddss9419
authors	Choukry, Maha
year	1994
title	Knowledge Acquisition by Measurement: The Domain of Building Change
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper presents a study that is aimed at finding a basis for systematic knowledge acquisition. More specifically, it attempts to introduce, knowledge acquisition by measurement: a method thatallows objective evaluation of empirical observations. Measurement has proven to be a significant tool to acquire, evaluate, and upgrade knowledge in some knowledge domains. In other domains,such as the domain of building change, measurement is barely subject of study. Building change knowledge acquisition by measurement seems to become a significant subject of study for several reasons: (i) increase our objective knowledge of previous building changes, (ii) allow systematic monitoring of present changes, and (iii) assist decisions planning for change in new buildings. In current studies, questions such as what were required changes, what were the building elements that fulfilled a change, how often did a building change, and what were the costs related to a change, often get no systematic or objective answers. Hence, to overcome that, I am concerned with finding a method that is to answer the following questions: 1) What is the domain of building change; 2) Is a method of knowledge acquisition by measurement adequate to represent buildingchanges; 3) Can empirical observations of building change be systematically represented and objectively evaluated using this method; and 4) How can this method be applied to assist theunderstanding of previous changes, the control of present changes, and assist planning for building change. The method introduced is based on three modules: (i) domain of building change; (ii) modelling this domain; and (iii) measurement. These three modules enable the formulation of the measurement of building change, namely the change indicator. Multiple change indicators, such as cost change indicator, or occurrence change indicator can measure empirical observations ofbuilding change. Sequential steps that lead to the development of this method start by section 1, where the domain of building change is specified. In section 2 this domain is modelled, and in section 3, knowledge acquisition by measurement method is introduced. A case study, shows how empirical building changes can be measured is explained in section 4. In section 5, three possible applications are introduced, and in section 6, I explain how a computerized prototype would enhance the efficiency of using such applications. Findings and conclusions resulting from this study are summarized in section 7.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9427
id	ddss9427
authors	Engelen, Guy and White, Roger
year	1994
title	A Strategic Planning and Policy Decision Support Tool for Urban Regions
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper we present a Decision Support System developed to assist urban designers, planners and policy makers to explore and evaluate possible urban layouts and their growth patterns. Thecore of the system consists of a modelling shell allowing the user to specify cellular automata based models of urban and regional systems. These models capture the effect of local spatial processes in which the use, or desired use of each parcel or cell of land is determined partly by institutional and environmental factors, and partly by the activities present in its neighbourhood. Since each cell affects every other cell within its neighbourhood, a complex dynamic emerges. Unlike conventional cellular automata, the models are defined with a large neighbourhood --over a hundred cells-- a relatively large number of states --more than a dozen in some applications-- representing socio-economic and natural land-uses. The approach permits the straightforward integration of detailed physical, environmental, and institutional constraints, as well as including the effects of the transportation and communication infrastructure. These models thus permit a very detailed representation of evolving spatial systems. The current version of the system represents urban areas as consisting of up to 10.000 interacting zones, each roughly the size of an individual city block. These models are easy to build and apply, yet empirical tests show that they produce realistic simulations of urban land use dynamics. Consequently, they are well suited to form the heart of the DSS, which provides the user with a number of tools for exploration,analysis and evaluation of alternative futures of the system as they result from policy interventions that are imposed by means of what-if experiments and scenario analysis. For example, the DSS isable to identify areas in which pressure for change in land use restrictions may become critical under particular development strategies. In the DSS, the modelling shell is coupled to a simple,custom-built GIS. In the stand-alone application of the DSS, this stores the detailed geographical qualities of the area being modelled, and allows basic overlay manipulations. It also displays theresults of the model while the simulation proceeds. Alternatively, the GIS can serve as aninterface to more elaborate, commercial GIS systems.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ecaadesigradi2019_027
id	ecaadesigradi2019_027
authors	Erzetic, Catherine, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Enhancing User-Engagement in the Design Process through Augmented Reality Applications
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-432
doi	https://doi.org/10.52842/conf.ecaade.2019.2.423
summary	Augmented Reality (AR) technologies are often perceived as the most impactful method to enhance the communication between the designer and the client during the iterative design process. However, the significance of designing the User Interface (UI) and the User Experience (UX) are often underestimated. To intercede, this research aims to employ new and existing techniques to develop UI's, and comparatively assess "the accuracy and completeness with which specified users can achieve specified goals in particular environments" (Stone, 2005) - a notion this research delineates as 'effectiveness'. Prompted by the work of key scholars, the developed UI's were assessed through the lens of existing UI evaluation techniques, including: Usability Heuristics (Nielsen, 1994) and Visual and Cognitive Heuristics (Zuk and Carpendale, 2006). In partnership with PTW Architects, characteristics such as the rapidity and complexity of interactions, in conjunction with the interface's simplicity and intuitiveness, were extracted from 15 trials underwent by architectural practitioners. The outcomes of this research highlights strategies for the effective development of user interface design for mobile augmented reality applications.
keywords	User Interface; Human Centered Design; User Experience; Heuristics; Usability Inspection Method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	f586
authors	Gabriel, G. and Maher, M.L.
year	2000
title	Analysis of design communication with and without computer mediation
source	Proceedings of Co-designing 2000, pp. 329-337
summary	With recent developments in CAD and communication technologies, the way we visualise and communicate design representations is changing. A matter of great interest to architects, practitioners and researchers alike, is how computer technology might affect the way they think and work. The concern is not about the notion of 'support' alone, but about ensuring that computers do not disrupt the design process and collaborative activity already going on (Bannon and Schmidt, 1991). Designing new collaborative tools will then have to be guided by a better understanding of how collaborative work is accomplished and by understanding what resources the collaborators use and what hindrances they encounter in their work (Finholt et al., 1990). Designing, as a more abstract notion, is different than having a business meeting using video conferencing. In design it is more important to 'see' what is being discussed rather than 'watch' the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the method with which it is communicated (See Kvan, 1994). Similarly, we believe that by using text instead of audio as a medium for verbal communication, verbal representations can then be recorded alongside graphical representations for later retrieval and use. In this paper we present the results of a study on collaborative design in three different environments: face-to-face (FTF), computer-mediated using video conferencing (CMCD-a), and computer-mediated using "talk by typing" (CMCD-b). The underlying aim is to establish a clearer notion of the collaborative needs of architects using computer-mediation. In turn this has the potential in assisting developers when designing new collaborative tools and in assisting designers when selecting an environment for a collaborative session.
series	other
last changed	2003/04/23 15:50

_id	caadria2007_549
id	caadria2007_549
authors	Huang, Chuang-Yu
year	2007
title	The Role of Physical Models in Digital Design Processes
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.d1s
summary	In recent years, designers have used digital media at various points of the design process, which helps expand architectural possibilities. Digital media has changed not only the architectural style, but also the design process (Lynn, 1999). In earlier times, some researchers of design thinking have looked at how the role of physical models played in traditional design processes (Millon, 1994). However, the design process has been changed when media designers used to adjust from traditional to digital. Therefore, visual thinking and cognitive behavior of designers also change while using physical models in design processes. From the synthesis of the two aforementioned disciplines, we can find that there exists a point of deficiency. That is the cognitive research about designers who use physical models in digital design processes is absent. This is discussed in the current paper.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	e8b9
authors	Kesler, Beatrice
year	1994
title	PROGRAMME OF HABITAT WISHES - A TOOL FOR COMMUNICATION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 23-30
summary	How to develop an attractive built environment with the desired housing and well kept outdoor conditions? As long as experts do not ask lay-people for their needs and wants, we must not be surprised that people are not interested in their environment and show a lack of care. The contribution of (future) inhabitants in the planning process can have a material and a social impact on building, improving and maintaining a neighbourhood. One of the problems that have to be solved is the question how to improve the communication between non-professionals and professionals, between inhabitants and designers (architects). Inhabitants express themselves in a simple language about the number of rooms, cupboards, size of the garden and parking place. Architects communicate in drawings of designs and talk in a technical language about functions, forms, spacial structures, light and expression. It can be helpful - is the fundamental idea in Wageningen - to develop a shared language, to start talking about activities and to use scale models in a structured process. The participation process is a sort of exploratory expedition. Good communication is a must for a successful participation process. A clear expression of the 'programme of habitat wishes' is the first step in the dialogue between inhabitants and architect. The Structural Space Planning Method is a structured process to develop a 'programme of habitat wishes' for the built environment. It can be related to all sorts of objects: houses, co-housing projects, institutions, playgrounds, streets or neighbourhoods. Full scale and scale models are part of the Structural Space Planning Method, as described by Van Dam (these proceedings). This contribution describes some practical experiences with the development of the 'programme of habitat wishes' and the effects on the participation process.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 10:59

_id	diss_kuo
id	diss_kuo
authors	Kuo, C.J.
year	1999
title	Unsupervised Dynamic Concurrent Computer-Aided Design Assistant
source	Los Angeles: UCLA
summary	The increasing capability of computer-aided architectural design systems has strengthened the role that the computer plays in the workplace. Due to the complexity of developing new techniques and research, these systems are undertaken mostly by scientists and engineers without significant architectural input (Willey, 1991). The design concept of these systems may be based on a well-defined and well-understood process, which is not yet realized in architectural design (Galle, 1994). The output of such research may not be easily adapted into the design process. Most of the techniques assume a complete understanding of the design space (Gero and Maher, 1987) (Willey, 1991). The description or construction of the design space is always time and space consuming, and the result can never be complete due to the ever-changing nature of architectural design. This research intends to initiate a solution for the above problems. The proposed system is an unsupervised-dynamic-concurrent-computer-aided-design assistant. The “unsupervised” means the learning process is not supervised by the user because it is against the designer's nature to “think-aloud” in the design studio and it also increases the work load. It is dynamic because the size of the knowledge base is constantly changing. Concurrent means that there are multiple procedures active simultaneously. This research focuses on learning the operational knowledge from an individual designer and reapplying it in future designs. A computer system for this experiment is constructed. It is capable of The preliminary result shows a positive feedback from test subjects. The purpose of this research is to suggest a potent computational frame within which future developments may flourish.
series	thesis:PhD
last changed	2003/11/28 07:37

_id	a9f0
authors	Lentz, Uffe
year	1994
title	New Tools: New Architecture
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 217
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f7f
summary	Our young students have no strong bindings to the tools and methods of our profession. With their open-minded access to the media, they often try to do things, which are surprising and new. Things which would have been impossible to think of without a computer. They are inspired of apparently unknown design-options, which they find in CAD-tools, or they are exploring possibilities in 'strange' combinations of media, not unknown from Television-commercials and music-videos. This Blitz-session will show some students' projects in a very short while. The common thing is, that the students have broken rules, that the teacher never realised were rules, because of his (my) traditional education. One student uses a solid modelling -tool for inspiration, - another uses an auto-tracing tool to generate the concept - and a group of students used a combination of video, grabbing and 3D-modelling to generate new architecture.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9463
id	ddss9463
authors	Lucardie, Larry
year	1994
title	A Functional Framework For Conceptual Modelling
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	A conceptual model is not only indispensable for the design and implementation of knowledge based systems, but also for their validation, modification, maintenance and enhancement. Experience indicates, however, that in many cases reality is not well reflected in a full-fledged conceptual model. What is systematically lacking in the prevailing conceptualization methods is a well-developed theory of knowledge that underlies conceptualization methods: a theory that precedes the process of forming meaningful classifications and that precedes the specification of a conceptual model. To date, conceptualization methods are based on the probabilistic assumption that, in essence, all conditions necessary for creating a classification, are provided initially and can easily be revealed by utilizing mathematical measures of similarity. Another frequently occurring prototypical assumption is that for creating a classification, necessary conditions are sufficient. Furthermore, it is assumed that the categories of conditions are a priori fixed and unconditional. That conceptualizing takes place without any explicit background knowledge about goals of classifications and without contextual influences and that categorizations have an unconditional status are not viewed as problems. In contrast to these approaches, the functional view states that relevant descriptive attributes are not necessarily a priori given but should be acquired through knowledge about goals of classifications and about contexts. It is also asserted that an explicit concern for necessary conditions will not suffice for capturing the dynamics of reality. Furthermore, the functional view puts forward that a goal- and context-oriented strategy leads to the reconstruction of new attributes and categorizations with a dynamic status. The aim of this paper is to discuss the theoretic and practical merits of the functional view compared to the probabilistic and prototype approaches. Conceptual models developed in the Computer Integrated Manufacturing-Project will serve as illustrations for the main ideas.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9466
id	ddss9466
authors	Moore, Kathryn
year	1994
title	Abstract Into Reality
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Skills associated with the art of design, imagination, intuition, visual, spatial and perceptual thinking, have generally been ignored by the educational system. These imaginal skills have been considered insignificant within a predominately positivist culture, disregarded as a valid measure of intelligence. Culturally, therefore, they remain relatively underdeveloped. A narrowly defined type of logic, reason and rationality has been regarded as the preferred form of knowledge, and as a consequence, significant and complementary ways of understanding and thinking have been neglected. This affects how we regard design, design processes and design theory. It is suggested that it also explains the divergence between design theory and design practice. This paper explores the relationship between the imaginal skills and design. Whereas the imaginal skills are often regarded as subjective and elusive, it is argued that the imaginal skills are cognitive abilities that can be taught, and that in doing so confidence is developed in different ways of thinking. This encourages qualitative or sensory understanding of space and place, a more comprehensive understanding of the vocabulary of design, and the ability to make connections between design expression and conceptual thinking. It considers the pedagogical programme of the undergraduate course in landscape architecture UCE, which aims to develop understanding of different ways of thinking as an integral, complementary part of the design process.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9471
id	ddss9471
authors	Oxman, Robert
year	1994
title	The Reflective Eye: Visual Reasoning in the Sketch
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Despite recent advances in our understanding of design thinking, we still lack a comprehensive theoretical approach to cognitive processes in design and particularly to visual reasoning. Of scientific interest in its own right, understanding non-verbal reasoning is also relevant to a wide range of subjects in the area of visual data resources for designers. This paper presents research into visual reasoning through the study of cognitive acts and processes associated with design drawing. Employing case studies in the design sketch, a vocabulary is defined for describing phenomena of visual reasoning in design as they are revealed in the sketch. Classes of reasoning processes are proposed as strings of graphic acts of state transformation. A theoretical schema is developed which relates the individual act of visual reasoning manifested in the sketch, of sketch sequences, with larger global cognitive phenomena such as analogical or associative reasoning in design. Based upon this schema, a symbol system for these acts and processes is proposed as a coding technique in the observation, analysis and recording of non-verbal processes in design.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9481
id	ddss9481
authors	Schmid, Peter
year	1994
title	MHP: Method Holistic Participation, Research and Experience During the Decades
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design Decision Support Systems always are closely related to the cooperation of more (than single) people and mostly even of several groups of people. Hence teamwork is an important part inorder to support (design) decisions or systematical and methodical collaboration and cooperation or participation. A system(atic) approach towards these participatory processes will be given in this paper. The MHP can get a place and meaning in the fields of the most urgent problems and within the discussions concerning SBS and ecological disaster (as significantly pointed out in already so many scientific reports and conferences). Collaboration and cooperation is needed more than ever before - although we can find examples and models already long ago. Two main problems can be answered by using the method - as already proofed in several cases: the facing of the environmental demands for building activities, because of the ecological crisis - worldwide combined with the SBS and the necessity for the different (power) groups to come together in order to reach some consensus for our common survival. The paper presentation will be enriched by many illustrations.
series	DDSS
last changed	2003/08/07 16:36

_id	a8c0
authors	VoB, A.
year	1994
title	Case-based Reasoning in Building Design: Problems of Case Elicitation and Retrieval
source	The Int. Journal of Construction IT 2(4), pp. 49-62
summary	This article deals with a set of problems that arose in the course of the FABEL project in order to build a system assisting in the design of complex buildings: Task analysis indicated a case-based approach with the subtasks of retrieval, assessment and adaptation of layouts. The idea of first choosing a retrieval method which would then guide the further knowledge elicitation process did not work, because there was no single suitable method. We investigated retrieval methods based on keywords, on vectors, bitmaps, gestalten and on topological structures. As it turned out, each method imposes a particular interpretation on a layout and serves different retrieval purposes. Using multiple methods required an open software architecture providing case management facilities for the various methods. Last not least, the extraction of relevant cases from integrated building models is not trivial at all. Both automatic routines of standard cases and manual extraction of special cases should be available.
series	journal paper
last changed	2003/05/15 21:45

For more results click below: