Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 53

Reformat results as: short short into frame detailed detailed into frame

_id	b110
id	b110
authors	Abadi Abbo, Isaac and Cavallin Calanche, Humerto
year	1994
title	Ecological Validity of Real Scale Models
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 31-40
summary	Space simulation is a technique employed by architects, urban designers, environmental psychologists and other related specialists. It is used for academic and research purposes, as an aid to evaluate the impact that the built environment or that to be built would yield in potential or real users. Real Scale Model is organized as one of the models which represents more reliable spatial characteristics in space simulations. However, it is necessary to know the ecological validity of the simulations carried out, that is the degree in which laboratory results could be taken as reliable and representative of real situations. In order to discover which variables of the model used are relevant so that their perception results ecologically valid in respect to reality, a research has been designed in which simulations of specific spaces are appraised both in real space and in the real scale model. The results of both evaluations were statistically analyzed and it shows no significative differences in psychological impressions between the evaluation of real spaces and real scale model. These ecological validation of the real scale model could be of great use to estimate the validity of the results obtained in spaces simulated in the laboratory.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2006/06/24 09:29

_id	0574
authors	Alison Murison and James Gray
year	1994
title	Spatial Analysis for Museum Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 201-206
doi	https://doi.org/10.52842/conf.ecaade.1994.201
summary	The paper describes how a specially written customisation of AutoCAD enables students of Architecture to use the method of spatial analysis called Space Syntax developed by Professor Bill Hillier of the Bartlett School of Architecture, London, to examine a number of existing museums, to compare the findings against other criteria, and to draw conclusions about the strategy adopted in museum design. Simple interactive graphics enable plans to be entered and compared, so that they may be evaluated during the design process, with decisions supported by objective tests. This improves both design decisions and the learning process.
series	eCAADe
last changed	2022/06/07 07:54

_id	ddss9404
id	ddss9404
authors	Arima, Takafumi and Sato, Seiji
year	1994
title	Form Characteristics of Landscape Images: A Landscape Research by Computer Image Processing
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Landscape evaluation research examines how individuals perceive the landscape. Because the amount of the data to describe landscapes is huge, landscape research needs the technology of the computer. This paper describes a method to catch the amount of physical characteristics which were extracted from landscape images by using the technology of the computer image processing and verifies its effectiveness. To do this analysis, we took photographic slides of a landscape sample. Pictures were taken for three regions (the city centre area, the outskirts area, and the farm village area). The number of slides was 6 for each place hence 18 in total were used for theanalysis. Next, we stored these slides on a computer disk. Form characteristics of the landscape elements were extracted by using computer image processing. Borderlines were extracted usingthe algorithm of Robert and were converted into coordinates data by minute line processing and the vector processing. Other elements were extracted by label processing and were converted into the coordinates data by vector processing. These data thus are the vector data for two-dimensions of the image and not the data for a three-dimension space. The processing of these images enables the analysis of the form characteristics in the landscape images. We calculated the data such as appearing length, angle numbers of appearance of the vector data, and analyzed the characteristic of shape and the complexities of landscape applying fractal theory. We compared three districts and were able to find landscape characteristics of various places as a result.
series	DDSS
last changed	2003/08/07 16:36

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	7d6c
authors	Chapin, William L., Lacey, T. and Leifer, Larry
year	1994
title	DesignSpace: A Manual Interaction Environment for Computer Aided Design DEMONSTRATIONS: Virtual Reality Multimedia
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 33-34
summary	DesignSpace is a computer-aided-design (CAD) system that facilitates dexterous manipulation of mechanical design representations. The system consists of an interactive simulation programmed with a seamless extended model of the designer's physical environment and driven with continuous instrumentation of the designer's physical actions. The simulation displays consistent visual and aural images of the virtual environment without occluding the designer's sensation of the physical surroundings. Developed at Stanford University's Center for Design Research (CDR), DesignSpace serves as an experimental testbed for design theory and methodology research. DesignSpace includes significant contributions from recent CDR development projects: TalkingGlove, CutPlane, VirtualHand, TeleSign, and VirtualGrasp. The current DesignSpace prototype provides modeling facility for only crude conceptual design and assembly, but can network multiple systems to share a common virtual space and arbitrate the collaborative interaction. The DesignSpace prototype employs three head-tracked rear projection images, head-coupled binaural audio, hand instrumentation, and electromagnetic position tracking.
keywords	Virtual Environment; Dexterous Manipulation; Interactive Simulation; Presence; Spatial Acoustics; Manual and Gestural Communication; Teleconference; Collaboration
series	other
last changed	2002/07/07 16:01

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0df3
authors	Dam, Hanke van
year	1994
title	PLAN EVALUATION BY SIMULATION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 15-22
summary	The full-scale model in Wageningen was developed some 35 years ago and has been in use ever since. In a recent brochure about our mock-up system you will find four applications of our model: education, research, consultancy and information. In this paper some information about these four subjects will be presented in the sequence just mentioned. First some general information will be given about the system and about the methodological aspects of the use of our model, named 'the Structural Space Planning Method'.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:01

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	b81d
authors	Davies, C. and Harrison, J.
year	1996
title	Osmose: Towards Broadening the Aesthetics of Virtual Reality
source	ACM Computer Graphics: Virtual Reality Volume 30, Number 4
summary	Osmose is an immersive virtual environment, produced by Softimage in 1994/95. One of the primary goals of Osmose was to push the expressive capabilities of existing 3D tools, to demonstrate that an alternative aesthetic and interactive sensibility is possible for real-time, interactive, 3D computer graphics. Osmose was created under the direction of Char Davies, the Director of Visual Research at Softimage. A former painter, as well as a creator of 3D computer graphic stills, Davies has a particular artistic vision which has driven the project. Davies has been striving for years to represent space as a luminous enveloping medium. This has led her from painting to 3D computer graphics, and finally into creating immersive virtual spaces. One of Davies' intentions for Osmose was to create a space that is "psychically innovating," one in which, to quote Bachelard, participants do not change "place," but change their own nature. Osmose was therefore designed to explore the potential of immersive virtual space to allow participants to shed their habitual ways of looking at (and behaving in) the world. By doing this, we hoped they would then emerge from the virtual world to experience the real world in a fresh way, reawakening a fundamental sense of their own "being-in-the-world." We hoped that this could be accomplished through the visual, aural and interactive aesthetic of the work.
series	journal paper
last changed	2003/04/23 15:50

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
doi	https://doi.org/10.52842/conf.ecaade.1994.060
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

_id	4f23
authors	Dieberger, Andreas
year	1994
title	Navigation in Spatial Information Environments: User Interface Design Issues for Hypertext and VR Systems Posters
source	Proceedings of the ECHT'94 European Conference on Hypermedia Technologies 1994
summary	The Information City project (presented in a poster at Hypertext 93) uses the spatial user interface metaphor of a city to organize and navigate large collections of hypertextual information. As we are used to navigate real life cities the city metaphor -- enriched with magic features -- should help to navigate information structures. A first implementation of the Information City was started in a MUD system. MUDs are networked multi-user text-adventure games which usually make use of a house / city metaphor. MUDs are conceptually similar to hypertext systems and navigational findings in those systems are therefore relevant also to hypertext. While implementing the first parts of the city research into navigation in MUDs was found necessary. This poster presents some results of this navigational study and describes how knowledge in the domains of architecture and city-planning can be used to design an easy to navigate virtual city. Highlights of the results concern magic features and collaboration. Magic features extend the spatial metaphor beyond typical properties of space. An example is the hypertext link which allows tunneling through the spatial structure. Other results concern the richness of spaces (or space-descriptions) and communication between users. It seems the chief benefit of the spatial metaphor of the city is in communication about spatial relationships of information. The findings probably are valuable in designing any information system using spatial metaphors. They are especially useful for hypertext systems realized in some virtual environment -- be it a MUD or an immerse virtual reality system.
series	other
last changed	2002/07/07 16:01

_id	ddss9428
id	ddss9428
authors	Erturk, Scvinc and Erturk, Zafer
year	1994
title	Historical Background of the Visual Simulation Models in Architectural Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is well known that every sort of visualization model has its own capacity to represent the reality and designers' concepts of space. To the authors' knowledge, there are very few attempts to measure and compare their relative potential power of presentation. Given this lack of academic studies, it would be necessary to give a historical background on the use of visual models. Basically those tools could be divided into two main types : traditional visula techniques such as drawings , scale models and most advance technological tools ranging from basic slidesand films to recentlydeveloped techniquessuch as relatoscope, and computer aided simulation models. This paper covers the historical background of visual models .
series	DDSS
last changed	2003/08/07 16:36

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	2098
authors	Goldman, Glenn and Hoon, Michael
year	1994
title	Digital Design In Architecture: First Light, Then Motion, and Now Sound
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 27-38
doi	https://doi.org/10.52842/conf.acadia.1994.027
summary	If we restricted our idea of architecture to only the traditional and static description of visual space and form, we might not be considering significant characteristics of the places we are designing. If, however, we accepted even a limited definition, as stated by Le Corbusier, that "architecture is the masterly, correct, and magnificent play of masses brought together in light", we would at least be forced to consider the dimension of time as the ever-changing daylight modifies the way our creations are perceived. However, neither the built nor the natural environments are silent. Sound affects the way we feel about certain events and places, and in turn, places we create can modify or influence the way we hear sounds. As computers become more audio capable, we can expect changes in the ways that architects plan, design, and present their projects. Issues of both objective and nonobjective sound can become significant factors throughout the building delivery process. As the visual sophistication and acoustic expectations of society rise because of the ubiquitous power of electronic multimedia - as well as "cross-media" applications (film, video, television, and scientific visualization) it is inevitable that the architectural design and presentation processes reflect these changes.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	672c
authors	Hill, Pamela J. and Smeltzer, Geert T.A.
year	1994
title	Virtual Reality in the Architectural Design Studio
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 229-231
doi	https://doi.org/10.52842/conf.acadia.1994.229
summary	In 1994, students from Montana State University took part in a student exchange at the Eindhoven University of Technology in the Netherlands. The goal of this exchange was to investigate the pedagogical results of using Virtual Reality in the architectural design studio as a tool to create, understand, and describe three-dimensional space. At the conclusion of this project, it was discovered that through VR the students were able to understand the spatial qualities of their own designs much more comprehensively than with threedimensional computer models alone. It was also discovered that the understanding of peer students, design, and technical faculty was enhanced as well.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	ddss9445
id	ddss9445
authors	Hillier, B., Penn, A., Dalton, N., Chapman, D. and Redfern, F.
year	1994
title	Graphical Knowledge Interfaces: The Extensive and Intensive Useof Precedent Data Bases in Architecture and Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Space syntax' is a family of techniques for the analysis of architectural and urban space which can be used both in research and design mode. This means, for example, that a redevelopment area in an urban context can be researched using space syntax models which can then be turned round and used as the basis for design idea of a 'graphical knowledge interface' (GM) is a further development of this in feeding research into design. It starts from the important role that the analysis and comparison of 'precedents', that is, cases with some similarity of the design problem in hand, often play in design. In a GM, 'precedents' which have already been researched using the space syntax methodology and which are relevant to a particular design problem - say a set of urban areas or a set of housing estates - can be brought into the modelling technique, so that the designer has on hand not simply a space syntax model of the problem in hand but an intelligent 'precedent' in the form of graphical and statistical representations which can be manipulated and interrogated during the design process, in much the same way as discussion of precedent are currently brought into design but with much more complex data and much more powerful theoretical tools. GM can be used as intensive mode, in which many different kinds of data - say on land uses, rents, or crime rates - are added to the model of an area, or in extensive mode where the emphasis is on comparing, say, the structures of a large number of urban areas. The GM will be illustrated through a worked example of a recent major urban design project in which the team has participated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	f42b
id	f42b
authors	Hofmeyer, Herm
year	1994
title	KONSTRUKTIEF ONTWERPEN MET BEHULP VAN COMPUTERPROGRAMMATUUR (1) VERSLAG AFSTUDEERPROJECT (2) BIJLAGE GEBRUIKSAANWIJZING, CODE EN TOELICHTING BIJ PROGRAMMA
source	Technische Universiteit Eindhoven, Department of Architecture, Building and Planning, Structural Design Group
summary	This thesis presents the first basics of an expertsystem to transform a spatial into a structural design. The system thus relates space-allocation techniques and structural design software for stress-engineering. For the implementation Prolog-2 was used. Although in Dutch, the thesis provided background information for more recently written papers for eCAADe (2005) and CAADRIA (2006). The thesis was published as a paper in Design Studies (2006).
keywords	space-allocation; structural design; expert system
series	thesis:MSc
type	normal paper
email
last changed	2006/04/21 07:58

_id	ddss9446
id	ddss9446
authors	Horgen, Turid
year	1994
title	Post Occupancy Evaluation as a Strategy to Develop an Improved Work Environment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	A post-occupancy evaluation is a formal way of finding out whether a recently occupied, remodelled, or built environment is performing, as was intended in its programming or design, and a term which has been developed in the professional field in the United States over the last 20 years. The Scandinavian approach to the same question has emphasised surfacing the values of the users of the work environment as a tool for a more comprehensive approach to space planning and design. A recent case-study of the Taubman Building at Harvard University's John F. Kennedy School of Government was aimed at blending the two strategies for evaluation, defined postoccupancy evaluation as a dialogue with the client, as a process to help the client reflect on spatial and technological improvements, or alternate strategies for organisational locations in buildings, and offers an interesting example of a possible future direction for POE's. Sheila Sheridan, Director of Facilities and Services at the Kennedy School, commissioned the case-study, and has been using it result in her daily work. Jacqueline Vischer, who has developed a survey of seven key dimensions of work-place comfort for commercial office buildings throughout eastern North America, and Turid Horgen, who has developed tools for participatory environmental evaluation and programming, widely used in Scandinavia, carried out the study and facilitated the evaluation process. The study is also done in the context of the ongoing research on these issues in the design Inquiry Group at the School of Architecture and Planning at MIT, which is involved in a larger program for developing strategies and tools for more effective programming and management of corporate space. This research defines the workplace environment as the interaction between four dimensions: space, technology, organisation and finance. Our approach is to integrate programming and evaluation with organisational planning and organisational transformation.Post occupancy evaluation is seen as a way to inform the client about his organisational culture as he manages the fit between a facility and its uses, and as one of several tools to bridge the frameworks and viewpoints and the many "languages" which are brought into the decision making process of designing the built environment.
series	DDSS
last changed	2003/08/07 16:36

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: