Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 352

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9428
id	ddss9428
authors	Erturk, Scvinc and Erturk, Zafer
year	1994
title	Historical Background of the Visual Simulation Models in Architectural Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is well known that every sort of visualization model has its own capacity to represent the reality and designers' concepts of space. To the authors' knowledge, there are very few attempts to measure and compare their relative potential power of presentation. Given this lack of academic studies, it would be necessary to give a historical background on the use of visual models. Basically those tools could be divided into two main types : traditional visula techniques such as drawings , scale models and most advance technological tools ranging from basic slidesand films to recentlydeveloped techniquessuch as relatoscope, and computer aided simulation models. This paper covers the historical background of visual models .
series	DDSS
last changed	2003/08/07 16:36

_id	ga0009
id	ga0009
authors	Lewis, Matthew
year	2000
title	Aesthetic Evolutionary Design with Data Flow Networks
source	International Conference on Generative Art
summary	For a little over a decade, software has been created which allows for the design of visual content by aesthetic evolutionary design (AED) [3]. The great majority of these AED systems involve custom software intended for breeding entities within one fairly narrow problem domain, e.g., certain classes of buildings, cars, images, etc. [5]. Only a very few generic AED systems have been attempted, and extending them to a new design problem domain can require a significant amount of custom software development [6][8]. High end computer graphics software packages have in recent years become sufficiently robust to allow for flexible specification and construction of high level procedural models. These packages also provide extensibility, allowing for the creation of new software tools. One component of these systems which enables rapid development of new generative models and tools is the visual data flow network [1][2][7]. One of the first CG packages to employ this paradigm was Houdini. A system constructed within Houdini which allows for very fast generic specification of evolvable parametric prototypes is described [4]. The real-time nature of the software, when combined with the interlocking data networks, allows not only for vertical ancestor/child populations within the design space to be explored, but also allows for fast "horizontal" exploration of the potential population surface. Several example problem domains will be presented and discussed. References: [1] Alias \| Wavefront. Maya. 2000, http://www.aliaswavefront.com [2] Avid. SOFTIMAGE. 2000, http://www.softimage.com [3] Bentley, Peter J. Evolutionary Design by Computers. Morgan Kaufmann, 1999. [4] Lewis, Matthew. "Metavolve Home Page". 2000, http://www.cgrg.ohio-state.edu/~mlewis/AED/Metavolve/ [5] Lewis, Matthew. "Visual Aesthetic Evolutionary Design Links". 2000, http://www.cgrg.ohio-state.edu/~mlewis/aed.html [6] Rowley, Timothy. "A Toolkit for Visual Genetic Programming". Technical Report GCG-74, The Geometry Center, University of Minnesota, 1994. [7] Side Effects Software. Houdini. 2000, http://www.sidefx.com [8] Todd, Stephen and William Latham. "The Mutation and Growth of Art by Computers" in Evolutionary Design by Computers, Peter Bentley ed., pp. 221-250, Chapter 9, Morgan Kaufmann, 1999.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	99ec
authors	Woodruff, A. (et al.)
year	1994
title	Zooming and tunneling in Tioga: supporting navigation in multidimensional space
source	Techn. report UCE 94/48, University of California, Berkeley
summary	In [STON93] we proposed a visual programming system called Tioga. The Tioga system applies a boxes and arrows programming notation to allow nonexpert users to graphically construct database applications. Users connect database procedures using a dataflow model. Browsers are used to visualize the resulting data. This paper describes extensions to the Tioga browser protocol. These extensions allow sophisticated, flight- simulator navigation through a multidimensional data space. This design also incorporates wormholes to allow tunneling between different multidimensional spaces. Wormholes are shown to be substantial generalizations of hyperlinks in a hypertext system. These powerful mechanisms for relating data provide users with great flexibility. For example, users can create magnifying glasses that provide an enhanced view of the underlying data.
series	report
last changed	2003/04/23 15:14

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9488
id	ddss9488
authors	Solans, Joan Antoni and Fargas, Josep
year	1994
title	Towards Hybrid Technologies for Urban Design: Balancing Reliability, Power and Speed in Decision Support
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper constructs a theory of decision support system design, based on the three independent concepts of reliability, power and speed borrowed from epistemology. We say that a system is reliable if a large part of its performance is useful or correct, that it is powerful if it performs in a useful way in a variety of situations of interest, and that it is fast if its behaviour is consistently dynamic. An arithmetic calculator, for example, is more reliable than a mathematician, but the latter is more powerful. A programming language is as reliable as a calculator, but the calculator is faster. We use this framework to argue that a successful deployment of decision support technology must take into account the balance between reliability power and speed. We illustrate this approach with the case of a hybrid system for studying urban transportation issues in the Greater Barcelona Region based on land use, contrasting it with more conventional tools such as traditional geographic information systems or traffic analysis software. The hybrid system is shown to sacrifice the reliability and speed characteristic of commercially available software for a powerful set of computational tools developed specifically for the problem at hand. This tradeoff process is formalized using an analysis based on second-order reliability, power and speed concepts. We show that micro-level sacrifices of one of these properties are often inversely correlated with the same characteristics at the macro level. For example, the relatively slow performance of in-house software components on a given project can result in a high level of dynamism in addressing several related projects. We extend the design theory outlined above to a methodology for characterizing decision support systems in general, and argue that the hybrid technologies approach is more likely to result in systems reflecting the user's domain knowledge and skills.
series	DDSS
email
last changed	2003/08/07 16:36

_id	95b3
authors	Wernecke, J.
year	1994
title	The Inventor Mentor: programming Object-oriented 3D graphics with Open Inventor
source	Release 2 Addison Wesley
summary	The Inventor Mentor introduces graphics programmers and application developers to Open Inventor, an object-oriented 3D toolkit. Open Inventor is a library of objects and methods used for interactive 3D graphics. Although it is written in C++, Open Inventor also includes C bindings. For the sake of brevity, the examples included in this book are in C++. All C++ examples, as well as equivalent examples written in C, are available on-line. If you are new to the C++ language, see Appendix A, "An Introduction to Object-Oriented Programming for C Programmers," to help you understand the references to classes, subclasses, and other object-oriented concepts used throughout this book. If you are using the C application programming interface, also see Appendix B, "An Introduction to the C API." This book describes how to write applications using the Open Inventor toolkit. The Inventor Toolmaker, a companion book for the advanced programmer, describes how to create new Inventor classes and how to customize existing classes. The Inventor Mentor contains the following chapters: * Chapter 1, "Overview," provides a general description of Open Inventor concepts and classes and how Inventor relates to OpenGL and the X Window System. * Chapter 2, "An Inventor Sampler," presents a short program that creates a simple object. This program is then modified to show the use of important Inventor objects: engines, manipulators, and components. * Chapter 3, "Nodes and Groups," introduces the concept of a scene graph and shows how to create nodes and combine them into different kinds of groups. * Chapter 4, "Cameras and Lights," describes the camera nodes used to view a scene and the light nodes that provide illumination. * Chapter 5, "Shapes, Properties, and Binding," describes how to create both simple and complex shapes and how to use property nodes, including material, draw style, and lighting model nodes. Binding materials and surface normals to shape nodes is also explained. * Chapter 6, "Text," shows the use of 2D and 3D text nodes. * Chapter 7, "Textures," describes how to apply textures to the surfaces of objects in a scene. * Chapter 8, "Curves and Surfaces," explains how to use NURBS curves and surfaces. * Chapter 9, "Applying Actions," describes how operations are applied to an Inventor scene graph. Actions include OpenGL rendering, picking, calculating a bounding box, calculating a transformation matrix, writing to a file, and searching the scene graph for certain types of nodes. * Chapter 10, "Handling Events and Selection," explains how Inventor receives events from the window system. It also describes how the selection node manages a selection list and performs highlighting. * Chapter 11, "File Format," describes Inventor's interchange file format, used for reading files into Inventor, writing files out from Inventor, and data exchanges such as copy and paste. * Chapter 12, "Sensors," describes how Inventor sensors watch for certain types of events and invoke user-supplied callback functions when these events occur. * Chapter 13, "Engines," describes how you can use Inventor engines to animate parts of a scene graph, or to create interdependencies among the nodes in the graph. * Chapter 14, "Node Kits," introduces node kits, a convenient mechanism for creating groups of related Inventor nodes. Each node kit contains a catalog of nodes from which you select the desired nodes. * Chapter 15, "Draggers and Manipulators," describes how to use draggers and manipulators, which are special objects in the scene graph that respond to user events. Manipulators are nodes with field values that can be edited directly by the user. * Chapter 16, "Inventor Component Library," shows how to use Inventor's Xt components, which are program modules with a built-in user interface for changing the scene graph interactively. It also Chapter 17, "Using Inventor with OpenGL," discusses how to use Inventor with the OpenGL Library.
series	other
last changed	2003/04/23 15:14

_id	6838
authors	Berberidou-Kallivoka, Liana
year	1994
title	An Open Daylighting Simulation Environment
source	Carnegie Mellon University, Pittsburgh
summary	Various studies have shown that performance simulation tools have not been integrated effec- tively in the architectural design process. The conventional lighting simulation tools have been characterized as decision verification tools rather than design support tools. Particularly in the early design stage, when crucial and often irreversible decisions are made, this evident lack of appropriate lighting simulation environments represents a serious drawback. The "mono-directionality" of the conventional simulation tools can be identified as one of the factors responsi- ble for insufficient integration of computational lighting modeling tools in the design process. In response to this circumstance, this thesis presents the conceptual background and the proto- , typical realization of an "open" daylighting simulation environment (GESTALT) to support architectural lighting design and education. Open simulation environments aim at extension (and inversion) of the design-to-performance mapping mechanisms of the conventional build- ing performance simulation tools. Toward this end, two fully operational versions of GESTALT have been implemented. GESTALT-01 is an explicit implementation based on invertible "fast-response" computational modules. GESTALT-02 is an implicit version that uses a comprehensive computational daylight simulator and investigative projection technique for performance-driven design exploration. Concepts, implementations, case studies, contributions and future directions are presented.
series	thesis:PhD
last changed	2003/02/12 22:42

_id	c5a9
authors	Batty, M. and Longley, P.
year	1994
title	Fractal Cities - A Geometry of Form and Function
source	Academic Press, London
summary	Fractal Cities is a pioneering study of the development and use of fractal geometry for understanding and planning the physical form of cities, showing how this geometry enables cities to be simulated through computer graphics. It shows how cities evolve and grow in ways that at first sight appear irregular, but which, when understood in terms of fractals, illustrate an underlying order that reveals their complexity and diversity. The book contains sixteen pages of stunning computer graphics and explanations of how to construct them, as well as new insights into the complexity of social systems. The authors provide a gentle and intelligible introduction to fractal geometry as well as an exciting visual understanding of the form of cities, thus providing one of the best introductions to fractal geometry available for non-mathematicians and social scientists. Fractal Cities can be used as a text for courses on geographic information systems, urban geography, regional science and fractal geometry. Planners and architects will also find that there are many aspects of fractal geometry in this book relevant to their own interests. Furthermore, those involved in fractals and chaos, computer graphics, and systems theory will find important methods and examples that are germane to their work.
series	other
last changed	2003/04/23 15:14

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	adb0
authors	Bishop, I.
year	1994
title	The role of visual realism in communicating and understanding spatial change and process
source	Visualization in Geographical Information Systems. H. Hearnshaw and D. Unwin. Chichester, John Wiley & Sons, pp. 60-64
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	7d6c
authors	Chapin, William L., Lacey, T. and Leifer, Larry
year	1994
title	DesignSpace: A Manual Interaction Environment for Computer Aided Design DEMONSTRATIONS: Virtual Reality Multimedia
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 33-34
summary	DesignSpace is a computer-aided-design (CAD) system that facilitates dexterous manipulation of mechanical design representations. The system consists of an interactive simulation programmed with a seamless extended model of the designer's physical environment and driven with continuous instrumentation of the designer's physical actions. The simulation displays consistent visual and aural images of the virtual environment without occluding the designer's sensation of the physical surroundings. Developed at Stanford University's Center for Design Research (CDR), DesignSpace serves as an experimental testbed for design theory and methodology research. DesignSpace includes significant contributions from recent CDR development projects: TalkingGlove, CutPlane, VirtualHand, TeleSign, and VirtualGrasp. The current DesignSpace prototype provides modeling facility for only crude conceptual design and assembly, but can network multiple systems to share a common virtual space and arbitrate the collaborative interaction. The DesignSpace prototype employs three head-tracked rear projection images, head-coupled binaural audio, hand instrumentation, and electromagnetic position tracking.
keywords	Virtual Environment; Dexterous Manipulation; Interactive Simulation; Presence; Spatial Acoustics; Manual and Gestural Communication; Teleconference; Collaboration
series	other
last changed	2002/07/07 16:01

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	b81d
authors	Davies, C. and Harrison, J.
year	1996
title	Osmose: Towards Broadening the Aesthetics of Virtual Reality
source	ACM Computer Graphics: Virtual Reality Volume 30, Number 4
summary	Osmose is an immersive virtual environment, produced by Softimage in 1994/95. One of the primary goals of Osmose was to push the expressive capabilities of existing 3D tools, to demonstrate that an alternative aesthetic and interactive sensibility is possible for real-time, interactive, 3D computer graphics. Osmose was created under the direction of Char Davies, the Director of Visual Research at Softimage. A former painter, as well as a creator of 3D computer graphic stills, Davies has a particular artistic vision which has driven the project. Davies has been striving for years to represent space as a luminous enveloping medium. This has led her from painting to 3D computer graphics, and finally into creating immersive virtual spaces. One of Davies' intentions for Osmose was to create a space that is "psychically innovating," one in which, to quote Bachelard, participants do not change "place," but change their own nature. Osmose was therefore designed to explore the potential of immersive virtual space to allow participants to shed their habitual ways of looking at (and behaving in) the world. By doing this, we hoped they would then emerge from the virtual world to experience the real world in a fresh way, reawakening a fundamental sense of their own "being-in-the-world." We hoped that this could be accomplished through the visual, aural and interactive aesthetic of the work.
series	journal paper
last changed	2003/04/23 15:50

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
doi	https://doi.org/10.52842/conf.ecaade.1994.060
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_027
id	ecaadesigradi2019_027
authors	Erzetic, Catherine, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Enhancing User-Engagement in the Design Process through Augmented Reality Applications
doi	https://doi.org/10.52842/conf.ecaade.2019.2.423
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-432
summary	Augmented Reality (AR) technologies are often perceived as the most impactful method to enhance the communication between the designer and the client during the iterative design process. However, the significance of designing the User Interface (UI) and the User Experience (UX) are often underestimated. To intercede, this research aims to employ new and existing techniques to develop UI's, and comparatively assess "the accuracy and completeness with which specified users can achieve specified goals in particular environments" (Stone, 2005) - a notion this research delineates as 'effectiveness'. Prompted by the work of key scholars, the developed UI's were assessed through the lens of existing UI evaluation techniques, including: Usability Heuristics (Nielsen, 1994) and Visual and Cognitive Heuristics (Zuk and Carpendale, 2006). In partnership with PTW Architects, characteristics such as the rapidity and complexity of interactions, in conjunction with the interface's simplicity and intuitiveness, were extracted from 15 trials underwent by architectural practitioners. The outcomes of this research highlights strategies for the effective development of user interface design for mobile augmented reality applications.
keywords	User Interface; Human Centered Design; User Experience; Heuristics; Usability Inspection Method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	211f
authors	Giangrande, A., Marinelli, A.M. and Sansoni, C.
year	1994
title	A CAAD Based Method for Designing Industrial Plants in Sensitive Landscapes
doi	https://doi.org/10.52842/conf.ecaade.1994.075
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 75-83
summary	The protection and management of the visual landscape require new conceptual and operative tools to better link (integrate) the creative and the evaluation phases of the design process. These tools should aid the designer to take into account and evaluate the visual impact of a new project from the early steps of the process: that is the same as saying that we have to upset the logic of EIA (Environmental Impact Assessment), a procedure that usually is applied when the project is finished or is coming to an end. This paper illustrates the first results of a research that aims to produce a system to aid the designer of buildings or infrastructures — industry plants, transport systems, etc. — that could generate a strong impact on the surrounding landscape. To this end we applied some methods and techniques which was worked out in scientific fields that have developed a lot in the late years: MCDA (Multi-Criteria Decision Aid) and CAAD (Computer Aided Architectural Design). The paper describes a software prototype to aid design of industrial installations for the early design phases.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	2098
authors	Goldman, Glenn and Hoon, Michael
year	1994
title	Digital Design In Architecture: First Light, Then Motion, and Now Sound
doi	https://doi.org/10.52842/conf.acadia.1994.027
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 27-38
summary	If we restricted our idea of architecture to only the traditional and static description of visual space and form, we might not be considering significant characteristics of the places we are designing. If, however, we accepted even a limited definition, as stated by Le Corbusier, that "architecture is the masterly, correct, and magnificent play of masses brought together in light", we would at least be forced to consider the dimension of time as the ever-changing daylight modifies the way our creations are perceived. However, neither the built nor the natural environments are silent. Sound affects the way we feel about certain events and places, and in turn, places we create can modify or influence the way we hear sounds. As computers become more audio capable, we can expect changes in the ways that architects plan, design, and present their projects. Issues of both objective and nonobjective sound can become significant factors throughout the building delivery process. As the visual sophistication and acoustic expectations of society rise because of the ubiquitous power of electronic multimedia - as well as "cross-media" applications (film, video, television, and scientific visualization) it is inevitable that the architectural design and presentation processes reflect these changes.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddss9432
id	ddss9432
authors	Goldschmidt, G.
year	1994
title	Visual Reference for Design: Analogy, Transformation and the Act of Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	All designers know that it is impossible to infer a design solution from the givens of a task alone, no matter how complete and well presented they are. Therefore, designers seek to complementinformation they receive, and the material they bring into the task environment includes visual images. Images may be gathered from every imaginable source, from domain-specific images (in architecture they are usually classified and pertain to building type, location, period, technology, style or creator) through 'metaphoric' images (art, nature) to eclectic personal favourites. Inaddition, randomly encountered images may find their way into a database of references: a depository of potentially useful images. With the exception of factual information that fills in thetask givens, it is usually far from clear what purpose may be served by images in general, or to what use the specific images aligned for a particular task may be put. We propose that the singlemost significant 'on line' role of visual references during the process of designing is to suggest potential analogies to the entity that is being designed. The process of discovering and exploitingan analogy in design is complex; we shall explain it in terms of Gentner's structure mapping theory, which we adapt to visual structures. We further propose that the abstraction process thatmust take place for the successful identification and mapping from source (visual reference) onto target (designed entity) requires transformations of images, and such transformations are bestachieved through sketching. Sketching facilitates the two way process of movement from the pictorial to the diagrammatic and from the schematic to the figural. Such transformations musttake place to arrive at the match that allows conceptual transfer, mapping of structural relations and insight through analogy.
series	DDSS
email
last changed	2003/08/07 16:36

For more results click below: