Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 385

Reformat results as: short short into frame detailed detailed into frame

_id	1a52
authors	Amor, R., Augenbroe, G., Hosking, J., Rombouts and W., Grundy, J.
year	1995
title	Directions in modelling environments
source	Automation in Construction 4 (3) (1995) pp. 173-187
summary	Schema definition is a vital component in the computerised A/E/C projects. existing tools to manage this task are limited both in terms of the scope Of problems they can tackle and their integration with each other. This paper describes a global modellling and development environment for large modelling projects. This environment provides a total solution from initial design of schemas to validation, manipulation arid navigation through final models. A major benefit of the described system is the ability to provide multiple views of evolving schemas (or models) in both graphical and textual forms This allows modellers to visualise their schemas and instance models either textually or graphically as desired. The system automatically maintains the Conisistency of the informalion in these views even when modifications are made in other views. Simple and intuitive view navigation methods allow required information to he rapidly accessed. The environment supports strict checking of model instances and schemas in one of the major ISO-standardised modelling languages no used in product data technology. Ill this paper we show how such a modelling environment has been constructed for evaluation in the JOULE founded COMBINE project.
keywords	Modelling Environment; Consistency; Multiple Views: Views; Building Models; Information Management; Integrated System; Product Modelling
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:33

_id	913a
authors	Brutzman, D.P., Macedonia, M.R. and Zyda, M.J.
year	1995
title	Internetwork Infrastructure Requirements for Virtual Environments
source	NIl 2000 Forum of the Computer Science and Telecommunications Board, National Research Council, Washington, D.C., May 1995
summary	Virtual environments (VEs) are a broad multidisciplinary research area that includes all aspects of computer science, virtual reality, virtual worlds, teleoperation and telepresence. A variety of network elements are required to scale up virtual environments to arbitrarily large sizes, simultaneously connecting thousands of interacting players and all kinds of information objects. Four key communications components for virtual environments are found within the Internet Protocol (IP) suite: light-weight messages, network pointers, heavy-weight objects and real-time streams. Software and hardware shortfalls and successes for internetworked virtual environments provide specific research conclusions and recommendations. Since large-scale networked are intended to include all possible types of content and interaction, they are expected to enable new classes of interdisciplinary research and sophisticated applications that are particularly suitable for implementation using the Virtual Reality Modeling Language (VRML).
series	other
last changed	2003/04/23 15:50

_id	6378
authors	Burry, M., Prentice, R. and Wood, P.
year	1995
title	Walking Before Running: A Prelude to Multimedia Construction Information
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 257-266
doi	https://doi.org/10.52842/conf.ecaade.1995.257
summary	An inherent problem with creating a multimedia application is generating the mass of information needed in order for it to be comprehensively useful. This is especially true when the subject is building construction for which any informative resource must cover the whole range of the material within its scope from the outset rather than merely be a sampler. Construction studies involve a large and diverse range of ´generic´ or ´model solutions´ which, in an ideal learning situation, are placed in context with historical and contemporary examples to aid a sense of critical evaluation. An obstacle, then, against creating resources dealing with detailed design is the risk that if it is not completed in its entirely there is no useful outcome. This paper also describes the problems and solutions involved in treating this material as data in a generic format so that its future usefulness is not compromised by current needs. It also outlines the programmes written to streamline an otherwise unwieldy process and deal with the inevitable non-conforming output from the participants.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_31.htm
last changed	2022/06/07 07:54

_id	b72a
authors	Ford, S., Aouad, G., Kirkham, J., Brandon, P., Brown, F., Child, T., Cooper, G., Oxman, R. and Young, B.
year	1995
title	An information engineering approach to modelling building design
source	Automation in Construction 4 (1) (1995) pp. 5-15
summary	This paper highlights potential problems in the construction industry concerning the large quantities of information produced and the lack of an adequate information structure within which to coordinate this information. The Information Engineering Method (IEM) and Information Engineering Facility (IEF) CASE tool are described and put forward as a means of establishing an information structure at a strategic level thus providing a framework for the implementation of lower level applications systems. The paper describes how the ICON (Integration/Information for Construction) project at Salford University is establishing and modelling the information requirements for the construction industry at the strategic level. The IEM and IEF are demonstrated using activity, data and interaction models with particular attention being paid to the function of building design within the broader context of design, procurement and the management of construction. Implications for future practice are also discussed.
keywords	Information engineering; CASE tools; Modelling; Integration; Design
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:32

_id	2068
authors	Frazer, John
year	1995
title	AN EVOLUTIONARY ARCHITECTURE
source	London: Architectural Association
summary	In "An Evolutionary Architecture", John Frazer presents an overview of his work for the past 30 years. Attempting to develop a theoretical basis for architecture using analogies with nature's processes of evolution and morphogenesis. Frazer's vision of the future of architecture is to construct organic buildings. Thermodynamically open systems which are more environmentally aware and sustainable physically, sociologically and economically. The range of topics which Frazer discusses is a good illustration of the breadth and depth of the evolutionary design problem. Environmental Modelling One of the first topics dealt with is the importance of environmental modelling within the design process. Frazer shows how environmental modelling is often misused or misinterpreted by architects with particular reference to solar modelling. From the discussion given it would seem that simplifications of the environmental models is the prime culprit resulting in misinterpretation and misuse. The simplifications are understandable given the amount of information needed for accurate modelling. By simplifying the model of the environmental conditions the architect is able to make informed judgments within reasonable amounts of time and effort. Unfortunately the simplications result in errors which compound and cause the resulting structures to fall short of their anticipated performance. Frazer obviously believes that the computer can be a great aid in the harnessing of environmental modelling data, providing that the same simplifying assumptions are not made and that better models and interfaces are possible. Physical Modelling Physical modelling has played an important role in Frazer's research. Leading to the construction of several novel machine readable interactive models, ranging from lego-like building blocks to beermat cellular automata and wall partitioning systems. Ultimately this line of research has led to the Universal Constructor and the Universal Interactor. The Universal Constructor The Universal Constructor features on the cover of the book. It consists of a base plug-board, called the "landscape", on top of which "smart" blocks, or cells, can be stacked vertically. The cells are individually identified and can communicate with neighbours above and below. Cells communicate with users through a bank of LEDs displaying the current state of the cell. The whole structure is machine readable and so can be interpreted by a computer. The computer can interpret the states of the cells as either colour or geometrical transformations allowing a wide range of possible interpretations. The user interacts with the computer display through direct manipulation of the cells. The computer can communicate and even direct the actions of the user through feedback with the cells to display various states. The direct manipulation of the cells encourages experimentation by the user and demonstrates basic concepts of the system. The Universal Interactor The Universal Interactor is a whole series of experimental projects investigating novel input and output devices. All of the devices speak a common binary language and so can communicate through a mediating central hub. The result is that input, from say a body-suit, can be used to drive the out of a sound system or vice versa. The Universal Interactor opens up many possibilities for expression when using a CAD system that may at first seem very strange.However, some of these feedback systems may prove superior in the hands of skilled technicians than more standard devices. Imagine how a musician might be able to devise structures by playing melodies which express the character. Of course the interpretation of input in this form poses a difficult problem which will take a great deal of research to achieve. The Universal Interactor has been used to provide environmental feedback to affect the development of evolving genetic codes. The feedback given by the Universal Interactor has been used to guide selection of individuals from a population. Adaptive Computing Frazer completes his introduction to the range of tools used in his research by giving a brief tour of adaptive computing techniques. Covering topics including cellular automata, genetic algorithms, classifier systems and artificial evolution. Cellular Automata As previously mentioned Frazer has done some work using cellular automata in both physical and simulated environments. Frazer discusses how surprisingly complex behaviour can result from the simple local rules executed by cellular automata. Cellular automata are also capable of computation, in fact able to perform any computation possible by a finite state machine. Note that this does not mean that cellular automata are capable of any general computation as this would require the construction of a Turing machine which is beyond the capabilities of a finite state machine. Genetic Algorithms Genetic algorithms were first presented by Holland and since have become a important tool for many researchers in various areas.Originally developed for problem-solving and optimization problems with clearly stated criteria and goals. Frazer fails to mention one of the most important differences between genetic algorithms and other adaptive problem-solving techniques, ie. neural networks. Genetic algorithms have the advantage that criteria can be clearly stated and controlled within the fitness function. The learning by example which neural networks rely upon does not afford this level of control over what is to be learned. Classifier Systems Holland went on to develop genetic algorithms into classifier systems. Classifier systems are more focussed upon the problem of learning appropriate responses to stimuli, than searching for solutions to problems. Classifier systems receive information from the environment and respond according to rules, or classifiers. Successful classifiers are rewarded, creating a reinforcement learning environment. Obviously, the mapping between classifier systems and the cybernetic view of organisms sensing, processing and responding to environmental stimuli is strong. It would seem that a central process similar to a classifier system would be appropriate at the core of an organic building. Learning appropriate responses to environmental conditions over time. Artificial Evolution Artificial evolution traces it's roots back to the Biomorph program which was described by Dawkins in his book "The Blind Watchmaker". Essentially, artificial evolution requires that a user supplements the standard fitness function in genetic algorithms to guide evolution. The user may provide selection pressures which are unquantifiable in a stated problem and thus provide a means for dealing ill-defined criteria. Frazer notes that solving problems with ill-defined criteria using artificial evolution seriously limits the scope of problems that can be tackled. The reliance upon user interaction in artificial evolution reduces the practical size of populations and the duration of evolutionary runs. Coding Schemes Frazer goes on to discuss the encoding of architectural designs and their subsequent evolution. Introducing two major systems, the Reptile system and the Universal State Space Modeller. Blueprint vs. Recipe Frazer points out the inadequacies of using standard "blueprint" design techniques in developing organic structures. Using a "recipe" to describe the process of constructing a building is presented as an alternative. Recipes for construction are discussed with reference to the analogous process description given by DNA to construct an organism. The Reptile System The Reptile System is an ingenious construction set capable of producing a wide range of structures using just two simple components. Frazer saw the advantages of this system for rule-based and evolutionary systems in the compactness of structure descriptions. Compactness was essential for the early computational work when computer memory and storage space was scarce. However, compact representations such as those described form very rugged fitness landscapes which are not well suited to evolutionary search techniques. Structures are created from an initial "seed" or minimal construction, for example a compact spherical structure. The seed is then manipulated using a series of processes or transformations, for example stretching, shearing or bending. The structure would grow according to the transformations applied to it. Obviously, the transformations could be a predetermined sequence of actions which would always yield the same final structure given the same initial seed. Alternatively, the series of transformations applied could be environmentally sensitive resulting in forms which were also sensitive to their location. The idea of taking a geometrical form as a seed and transforming it using a series of processes to create complex structures is similar in many ways to the early work of Latham creating large morphological charts. Latham went on to develop his ideas into the "Mutator" system which he used to create organic artworks. Generalising the Reptile System Frazer has proposed a generalised version of the Reptile System to tackle more realistic building problems. Generating the seed or minimal configuration from design requirements automatically. From this starting point (or set of starting points) solutions could be evolved using artificial evolution. Quantifiable and specific aspects of the design brief define the formal criteria which are used as a standard fitness function. Non-quantifiable criteria, including aesthetic judgments, are evaluated by the user. The proposed system would be able to learn successful strategies for satisfying both formal and user criteria. In doing so the system would become a personalised tool of the designer. A personal assistant which would be able to anticipate aesthetic judgements and other criteria by employing previously successful strategies. Ultimately, this is a similar concept to Negroponte's "Architecture Machine" which he proposed would be computer system so personalised so as to be almost unusable by other people. The Universal State Space Modeller The Universal State Space Modeller is the basis of Frazer's current work. It is a system which can be used to model any structure, hence the universal claim in it's title. The datastructure underlying the modeller is a state space of scaleless logical points, called motes. Motes are arranged in a close-packing sphere arrangement, which makes each one equidistant from it's twelve neighbours. Any point can be broken down into a self-similar tetrahedral structure of logical points. Giving the state space a fractal nature which allows modelling at many different levels at once. Each mote can be thought of as analogous to a cell in a biological organism. Every mote carries a copy of the architectural genetic code in the same way that each cell within a organism carries a copy of it's DNA. The genetic code of a mote is stored as a sequence of binary "morons" which are grouped together into spatial configurations which are interpreted as the state of the mote. The developmental process begins with a seed. The seed develops through cellular duplication according to the rules of the genetic code. In the beginning the seed develops mainly in response to the internal genetic code, but as the development progresses the environment plays a greater role. Cells communicate by passing messages to their immediate twelve neighbours. However, it can send messages directed at remote cells, without knowledge of it's spatial relationship. During the development cells take on specialised functions, including environmental sensors or producers of raw materials. The resulting system is process driven, without presupposing the existence of a construction set to use. The datastructure can be interpreted in many ways to derive various phenotypes. The resulting structure is a by-product of the cellular activity during development and in response to the environment. As such the resulting structures have much in common with living organisms which are also the emergent result or by-product of local cellular activity. Primordial Architectural Soups To conclude, Frazer presents some of the most recent work done, evolving fundamental structures using limited raw materials, an initial seed and massive feedback. Frazer proposes to go further and do away with the need for initial seed and start with a primordial soup of basic architectural concepts. The research is attempting to evolve the starting conditions and evolutionary processes without any preconditions. Is there enough time to evolve a complex system from the basic building blocks which Frazer proposes? The computational complexity of the task being embarked upon is not discussed. There is an implicit assumption that the "superb tactics" of natural selection are enough to cut through the complexity of the task. However, Kauffman has shown how self-organisation plays a major role in the early development of replicating systems which we may call alive. Natural selection requires a solid basis upon which it can act. Is the primordial soup which Frazer proposes of the correct constitution to support self-organisation? Kauffman suggests that one of the most important attributes of a primordial soup to be capable of self-organisation is the need for a complex network of catalysts and the controlling mechanisms to stop the reactions from going supracritical. Can such a network be provided of primitive architectural concepts? What does it mean to have a catalyst in this domain? Conclusion Frazer shows some interesting work both in the areas of evolutionary design and self-organising systems. It is obvious from his work that he sympathizes with the opinions put forward by Kauffman that the order found in living organisms comes from both external evolutionary pressure and internal self-organisation. His final remarks underly this by paraphrasing the words of Kauffman, that life is always to found on the edge of chaos. By the "edge of chaos" Kauffman is referring to the area within the ordered regime of a system close to the "phase transition" to chaotic behaviour. Unfortunately, Frazer does not demonstrate that the systems he has presented have the necessary qualities to derive useful order at the edge of chaos. He does not demonstrate, as Kauffman does repeatedly, that there exists a "phase transition" between ordered and chaotic regimes of his systems. He also does not make any studies of the relationship of useful forms generated by his work to phase transition regions of his systems should they exist. If we are to find an organic architecture, in more than name alone, it is surely to reside close to the phase transition of the construction system of which is it built. Only there, if we are to believe Kauffman, are we to find useful order together with environmentally sensitive and thermodynamically open systems which can approach the utility of living organisms.
series	other
type	normal paper
last changed	2004/05/22 14:12

_id	2a99
authors	Keul, A. and Martens, B.
year	1996
title	SIMULATION - HOW DOES IT SHAPE THE MESSAGE?
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4], pp. 47-54
summary	Architectural simulation techniques - CAD, video montage, endoscopy, full-scale or smaller models, stereoscopy, holography etc. - are common visualizations in planning. A subjective theory of planners says "experts are able to distinguish between 'pure design' in their heads and visualized design details and contexts like color, texture, material, brightness, eye level or perspective." If this is right, simulation details should be compensated mentally by trained people, but act as distractors to the lay mind. Environmental psychologists specializing in architectural psychology offer "user needs' assessments" and "post occupancy evaluations" to facilitate communication between users and experts. To compare the efficiency of building descriptions, building walkthroughs, regular plans, simulation, and direct, long-time exposition, evaluation has to be evaluated. Computer visualizations and virtual realities grow more important, but studies on the effects of simulation techniques upon experts and users are rare. As a contribution to the field of architectural simulation, an expert - user comparison of CAD versus endoscopy/model simulations of a Vienna city project was realized in 1995. The Department for Spatial Simulation at the Vienna University of Technology provided diaslides of the planned city development at Aspern showing a) CAD and b) endoscopy photos of small-scale polystyrol models. In an experimental design, they were presented uncommented as images of "PROJECT A" versus "PROJECT B" to student groups of architects and non-architects at Vienna and Salzburg (n= 95) and assessed by semantic differentials. Two contradictory hypotheses were tested: 1. The "selective framing hypothesis" (SFH) as the subjective theory of planners, postulating different judgement effects (measured by item means of the semantic differential) through selective attention of the planners versus material- and context-bound perception of the untrained users. 2. The "general framing hypothesis" (GFH) postulates typical framing and distraction effects of all simulation techniques affecting experts as well as non-experts. The experiment showed that -counter-intuitive to expert opinions- framing and distraction were prominent both for experts and lay people (= GFH). A position effect (assessment interaction of CAD and endoscopy) was present with experts and non-experts, too. With empirical evidence for "the medium is the message", a more cautious attitude has to be adopted towards simulation products as powerful framing (i.e. perception- and opinion-shaping) devices.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	9577
authors	Matalasov, Michail E.
year	1995
title	About Videocomputer Technologies at the Moscow Architectural Institute
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 303-308
summary	Historically mock-up projecting turned out to be one of the bases of architectural education in the Moscow Architectural Institute. In spite of the fact, that technical progress did not pass over this Institute, introducing elements of computer techniques into the process of education, traditional methods do still prevail. In some sense it is a positive phenomenon, which does not allow this Institute to become ,one of the many typical ones", though in the epoch of global scientific and technical progress here this situation is forced. Under the economic conditions, established in this country, it is impossible to ensure such computer equipment, which would make the process of teaching students up-to-date methods of computer-aided design possible and really general, and make frontal employment of computers for solving complex design problems quite real. Now we can speak only about selective - optional teaching students mastering computer methods on the modern level. At the same time it was noted repeatedly, that essential defects are common to the traditional designing, especially when it concerns education; these defects are connected with a great degree of abstracting the model of the projected object (by the way this concerns also computer models), realized in the form of a small-scale mock-up. This is due to the representation of the projected object separated from the real environment as well as difference in the scales of the observer and the observed object. Mistakes in perception and appreciation caused in this way affect the efficiency of training disastrously. Luckily the available variety of sufficiently simple and cheap technical devices allows to overcome the mentioned defects to a considerable degree and combining these devices with personal computers makes it possible to enlarge their possibilities considerably. And at the same time due to the specific character of the employment it becomes unnecessary to have a lot of computers and the employed technologies turn out to be more "friendly" to the architect practically not demanding him to have complicated special knowledge. We mean special videocomputer technologies ("multimedia"), including the employment of periscope devices (environmental simulator or "telemaketoscope").
series	plCAD
last changed	2000/01/24 10:08

_id	maver_086
id	maver_086
authors	Maver, T.W.
year	1996
title	A Tale of Three Cities
source	VR News. Proceedings of Virtual Heritage Conference 1995 (Bath [UK], Nov 22)
summary	The ABACUS Group has been active for some years in the use of computer graphics and multimedia to represent past, present and future buildings in both urban and rural settings. The three cities discussed during the presentation are Split, in former Yugoslavia - a graphical account of the development of Split from its origin in the Diocletian Palace of the Venetian Empire up to the present day; Edinburgh - a multimedia interface to a large-scale three dimensional computer model of Edinburgh Old Town; and Glasgow - Virtual City developments in the run up to the City of Architecture and Design celebrations in 1999. The presentation concludes with a report on the IMAGEA project - an international initiative to construct an Interactive Multimedia Archive of Great European Architecture.
series	other
type	normal paper
email
last changed	2006/09/11 07:29

_id	ebbf
authors	Ohno, Ryozo
year	1995
title	Street-scape and Way-finding Performance
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	In this study, it was hypothesized that people’s performance of way-finding depends on the characteristics of street-scapes, i.e., the more visual information exists the easier people find their own ways. This relationship was investigated by an experiment using an environmental simulator and analysis of the subject’s behavioral data recorded by the simulation system. Three scale models (1/150) of identical maze patterns (300m x 300m) which have different street-scapes were created and set in the simulator, in which an endoscope connected to CCD color TV camera controlled by a system operated by a personal computer. Three types of streets are: (1) having no characteristics with monotonous surface, (2) having characteristics on each corner with different buildings, (3) having characteristics along the streets with trees, columns or fences. The simulator allows a subject to move through the scale models and looking around, using a “joy-stick“ for viewing the scene as projected on 100-inch CCTV screen. The control system of the simulator records all signals generated by the “joy-stick“ every 0.01 second, and thus exact position within the model space and the viewing direction at given moment can be stored in the computer memory, which can be used to analyze the subject’s behavior. The task of a subject was to find the way which was previously shown by the screen. Three male and three female subjects for each of three street types, for a total of eighteen subjects participated in the experiment. An analysis of the trace of movements and viewing directions generally supported the hypothesis that the street with visual characteristics were easier to memorize the route although there was a large difference in performance among subjects. It was also noted that there were three different strategies of way-finding according to the subject: one group of subjects seemed to rely on well structured knowledge of the route, i.e., the cognitive map, and the other group seemed to rely on incoming visual information of the changing scenes, and the last group seemed to find the way using both the cognitive map and visual information depending on the situations.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ascaad2022_099
id	ascaad2022_099
authors	Sencan, Inanc
year	2022
title	Progeny: A Grasshopper Plug-in that Augments Cellular Automata Algorithms for 3D Form Explorations
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 377-391
summary	Cellular automata (CA) is a well-known computation method introduced by John von Neumann and Stanislaw Ulam in the 1940s. Since then, it has been studied in various fields such as computer science, biology, physics, chemistry, and art. The Classic CA algorithm is a calculation of a grid of cells' binary states based on neighboring cells and a set of rules. With the variation of these parameters, the CA algorithm has evolved into alternative versions such as 3D CA, Multiple neighborhood CA, Multiple rules CA, and Stochastic CA (Url-1). As a rule-based generative algorithm, CA has been used as a bottom-up design approach in the architectural design process in the search for form (Frazer,1995; Dinçer et al., 2014), in simulating the displacement of individuals in space, and in revealing complex relations at the urban scale (Güzelci, 2013). There are implementations of CA tools in 3D design software for designers as additional scripts or plug-ins. However, these often have limited ability to create customized CA algorithms by the designer. This study aims to create a customizable framework for 3D CA algorithms to be used in 3D form explorations by designers. Grasshopper3D, which is a visual scripting environment in Rhinoceros 3D, is used to implement the framework. The main difference between this work and the current Grasshopper3D plug-ins for CA simulation is the customizability and the real-time control of the framework. The parameters that allow the CA algorithm to be customized are; the initial state of the 3D grid, neighborhood conditions, cell states and rules. CA algorithms are created for each customizable parameter using the framework. Those algorithms are evaluated based on the ability to generate form. A voxel-based approach is used to generate geometry from the points created by the 3D cellular automata. In future, forms generated using this framework can be used as a form generating tool for digital environments.
series	ASCAAD
email
last changed	2024/02/16 13:38

_id	0611
authors	Ward, Gregory J.
year	1995
title	Making global illumination user-friendly
source	Eurographics Workshop on Rendering
summary	Global illumination researchers tend to think in terms of mesh density and sampling frequency, and their software reflects this in its user interface. Advanced rendering systems are rife with long command lines and parameters for tuning the sample densities, thresholds and other algorithm-specific variables, and the novice user is quickly lost in a sea of possibilities. This paper details a successful effort of making one such global illumination system usable by people who understand their problems, even if they do not understand the methods needed to solve them, through an assisted oracle approach. A single program is introduced to map a small set of intuitive control variables to the rendering commands and parameter settings needed to produce the desired output in a reasonable time. This new executive program then serves as the basis for a graphical user interface that is both friendly in its appearance and reliable in its performance. Finally, we conclude with some future directions for improving this interface.
series	other
last changed	2003/04/23 15:50

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	5236
authors	Arciszewski, T., Michalski, R.S. and Dybala, T.
year	1995
title	STAR methodology-based learning about construction accidents and their prevention
source	Automation in Construction 4 (1) (1995) pp. 75-85
summary	This paper presents the results of a feasibility study concerning the application of STAR-methodology-basedmachine learning to construction accidents and their prevention. A ten-stage knowledge acquisition process is presented and its individual stages described. Knowledge about construction accidents was acquired using a collection of 225 examples, based on actual accidents records. Inductive learning with a system based on the STAR-methodology was employed. This system was used in both the generalization and specialization modes of operation. The decision rules obtained are complex, but their interpretation is clear and they seem to be consistent with the present understanding of causal relationships between accident results and various factors affecting them. Also, the rules were verified using average overall and omission empirical error rates, which were calculated as average for three randomly determined sequences of examples. These error rates were calculated for all seven steps in the machine learning process, and were used to construct learning curves for both error rates. The relationships between error rates and the number of examples used for learning are analyzed, and coefficients of linear regression given and discussed. The 225 examples used were found to be grossly insufficient to produce reliable knowledge about accidents and therefore a large study is postulated which would involve the collection of a larger number of construction accident records. In general, our study demonstrated the feasibility of machine learning in acquiring knowledge about construction accidents.
keywords	Construction accidents and their prevention; Knowledge acquisition; Machine learning; Multi-stepmachine learning process
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:31

_id	623e
authors	Arumi-Noe, Francisco
year	1995
title	Algorithm For The Automatic Design Of A Shading Device
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 233-242
doi	https://doi.org/10.52842/conf.acadia.1995.233
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
keywords	Energy Conscious Design, Green Architecture, Sustainable Architecture, Solar Design, Computer Aided Design
series	ACADIA
last changed	2022/06/07 07:54

_id	00ae
id	00ae
authors	Ataman, Osman
year	1995
title	Building A Computer Aid for Teaching Architectural Design Concepts
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 187-208
doi	https://doi.org/10.52842/conf.acadia.1995.187
summary	Building an aid for teaching architectural design concepts is the process of elaborating topics, defining problems and suggesting to the students strategies for solving those problems. I believe students in Environment and Behavior (E&B) courses at Georgia Tech can benefit greatly from a computer based educational tool designed to provide them with experiences they currently do not possess. In particular, little time in the course (outside lectures) is devoted to applying concepts taught in the course to the studio projects. The tool I am proposing provides students with an opportunity to critique architectural environments (both simple examples and previous projects) using a single concept, "affordances". This paper describes my current progress toward realizing the goal of designing a tool that will help the students to understand particular concepts and to integrate them into their designs. It is my claim that an integrative and interactive approach - creating a learning environment and making both the students and the environment mutually supportive- is fundamentally more powerful than traditional educational methods.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	c2bd
authors	Belblidia, Salim and Perrin, Jean-Pierre
year	1995
title	Multi-Resolution Rendering of Architectural Models
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 231-239
summary	This paper presents a method for representing complex models with various levels of detail. It is based on a geometric simplification algorithm and is applied to a scene described by a rooted-tree structure. In order to control the restuting image quality and the computation time, we propose two algorithms which allow to choose one representation of the scene.
keywords	Computer Graphics, Image Synthesis, Realistic Rendering, Real-Time Rendering, Computer Aided Architectural Design
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	d7eb
authors	Bharwani, Seraj
year	1996
title	The MIT Design Studio of the Future: Virtual Design Review Video Program
source	Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary	The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series	other
last changed	2002/07/07 16:01

For more results click below: