Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 392

Reformat results as: short short into frame detailed detailed into frame

_id	bf5f
authors	Chen, Xiangping
year	1995
title	Representation, Evaluation and Edition of Feature-based and Constraint- based Design
source	Purdue University
summary	This thesis investigates a general and systematic approach to feature-based and constraint-based design. We combine feature-based design and constraint-based design by globally decomposing a design into a sequence of feature attachments and locally defining and positioning each feature by constraints. Analogous to the concept of high-level programming languages, we formalize a layered design model that eliminates the dependency of a design representation on a solid modeler. With this design model, design intent, such as feature descriptions and constraints, is stored in an unevaluated, modeler-independent design representation while the geometry to which it corresponds is stored in an evaluated, modeler-dependent design representation. The separation essentially relies on a naming and matching schema that converts between a geometric reference and a generic name, and a design compiler that automatically instantiates the unevaluated design representation to an evaluated design representation with respect to a solid modeler. The geometric references for defining feature attributes and constraints are recorded with their generic names in the unevaluated design representation. We propose several techniques for naming geometric entities unambiguously. The design compilation or instantiation involves remapping a generic name back to a geometric reference in the selected geometric modeler, solving constraints and implementing feature operations or attachments. Instead of developing a constraint solver for this design compiler, we use an independent and general solver. Feature attachment operations are different from classical Boolean operations in solid modeling. However, we provide a semantics for them that is based on existing operations in solid modeling. The layered design model allows users to edit archived conceptual designs to derive new designs quickly. We investigate the coordination of later features in the unevaluated and modeler-independent representation when a feature is edited and provide a method for editing feature-based and constraint-based design. We also discuss how to extend this work to a commercial feature-based and constraint-based CAD system.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	2508
authors	Eggli, L. and Bruderlin, B.D. (et al.)
year	1995
title	Sketching as a Solid Modeling Tool
source	Third Symposium on Solid Modeling and Applications. C. Hoffmann and J. Rossignac. Salt Lake City, ACM: 313-321
summary	This paper describes 'Quick-sketch', a 2d and 3d modeling tool for pen based computers. Users of this system define a model by simple pen strokes drawn directly on the screen of a pen-based PC. Lines, circles, arcs, or B-spline curves are automatically distinguished, and interpreted from these strokes. The system also automatically determines relations, such as right angles, tangencies, symmetry, and parallelism, from the sketch input, These relationships are then used to clean up the drawing by making the approximate relationships exact. Constraints are established to maintain the relationships in further editing. A constraint maintenance system, which is based on gestural manipulation and soft constraints, is employed in this system. Several techniques for sketch based definitions of solid objects are provided as well, including extrusion, surface of revolution, ruled surfaces and sweep. Feat ures can be sketched on the surfaces of 3d objects, using the same 2d- and 3d techniques. This way, objects of medium complexity can be sketched in seconds. The system can be used as a front-end to more sophisticated modeling, rendering or animation environments, serving as a hand sketching tool in the preliminary design phase.
series	other
last changed	2003/04/23 15:50

_id	980c
authors	Gougoudilis, Vasileios
year	1995
title	Hyperwalls or an Application of a Non-deterministic Rule-based System in Interactive Architectural Modelling
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 173-179
summary	This paper presents the architectural modeling as a process of augmenting spatial information; a chain of actions that leads from a sketched idea to the elaborated model. A symbolic constraint solver tool is connected to traditional CAD techniques, as well as to a data representation scheme efficient for architectural elements. The orchestration of the available and added tools allows the designer to ìedit ideasî fast, keeping in mind that different design profiles require adaptive tools to support the varying methodologies. Until the moment that automated design will be both possible and desirable, machines can really shorten the time needed to visualize design ideas in the sense of a handy but non-decisive ìcalculatorî. The discussion is built around illustrated examples from the implemented constraint based modeler.
keywords	Non-Deterministic, Rule-Based System, Architectural Modelling
series	CAAD Futures
last changed	1999/08/03 17:16

_id	ac5e
authors	Hirschberg, Urs and Streilein, André
year	1995
title	CAAD Meets Digital Photogrammetry: Modeling "Weak Forms" for Computer Measurement
doi	https://doi.org/10.52842/conf.acadia.1995.299
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 299-313
summary	The integration of state-of-the-art photogrammetric methods with the capabilities of CAAD has great potential for a variety of architectural applications. This paper describes the current status of an ongoing research project which aims to develop an easy to use tool for the photogrammetric generation of accurate, reliable and well structured 3D CAAD models of architectural objects. The project adresses the whole range of issues that arise from the digital image acquisition to the data processing, the data integration between photogrammetry and CAAD and the architectural structuring of the geometric data. While also giving a brief overview of the project, the paper concentrates on one central aspect of the system: a method to model what we will define as "weak forms" as the basis for qualitatively controlled computer measurement.
keywords	Digital Architectural Photogrammetry, Constraint-Based Modelling
series	ACADIA
email
last changed	2022/06/07 07:50

_id	07de
authors	Cheng, Nancy Yen-wen
year	1995
title	Linking the Virtual to Reality: CAD & Physical Modeling
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 303-311
summary	Using both study models and digital models for schematic design allows us to take advantage of the strengths of each. Models constructed manually benefit from spontaneous juxtapositions and serendipitous interactions with light and gravity. Converting these models into the digital realm allows the computer to take over in areas that it does best: geometric transformation, rigorous analysis, elaboration and co-ordination of details and complexity. As a project develops, CAD/CAM methods can generate forms or components for verifying the virtual representation. The paradigm of porting data to appropriate software tools needs to be extended to exporting out of and into the physical realm. Connecting to models in real space allows us to use senses that are not yet completely addressed by digital models.
keywords	Modeling, Representation, Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	80df
authors	Cook, Alan R.
year	1995
title	Stereopsis in the Design and Presentation of Architectural Works
doi	https://doi.org/10.52842/conf.acadia.1995.113
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 113-137
summary	This article presumes the primacy of spatial cognition in evaluating architectural designs and begins by describing key concepts involved in the perception of spatial form, focussing on parallax and stereoscopy. The ultimate emphasis is directed at presenting techniques which employ computers with modest hardware specifications and a basic three-dimensional modeling software application to produce sophisticated imaging tools. It is argued that these techniques are comparable to high end computer graphic products in their potentials for carrying information and in some ways are superior in their speed of generation and economies of dissemination. A camera analogy is considered in relation to controlling image variables. The ability to imply a temporal dimension is explored. An abbreviated summary of pertinent binocular techniques for viewing stereograms precedes a rationalization and initiation for using the cross-convergence technique. Ways to generate and view stereograms and other multiscopic views using 3-D computer models are described. Illustrations from sample projects show various levels of stereogram rendering including the theoretically 4-D wireframe stereogram. The translated perspective array autostereogram is presented as an economical and easily reproducible alternative to holography as well as being a substitute for stop action animation.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	c3d0
authors	Cotton, John
year	1995
title	Solid Modeling as a Tool for Constructing Solar Envelopes
doi	https://doi.org/10.52842/conf.acadia.1995.253
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 253-260
summary	This paper presents a method for constructing solar envelopes in site planning using a 3D solid-modeling program as the tool. The solar envelope for a building site is a mechanism for ensuring that planning regulations on the solar access rights of other sites are observed. In this application, solid modeling offers the practical advantage of being a general-purpose tool having the capability to handle sets of site conditions that are quite complex. The paper reviews the concept of solar envelopes and demonstrates the method of application of solar-envelope construction to a site defined to avoid overly simplifying conditions. Techniques for displaying the constraints on building sections imposed by a solar envelope are presented as well.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	2036
authors	Dzeng, R.J.
year	1995
title	Caseplan: A Case-based Planer and Scheduler for Construction Using Product Modeling
source	University of Michigan
summary	Construction planning and scheduling are important to contractors for estimating the cost and duration of a project they are to bid on and construct. Many projects specify incentive and disincentive clauses for completing projects early and late. The timely completion and success of a project rely on good planning and scheduling. Contractors who repeatedly build the same kind of facilities acquire experience in scheduling the needed construction work. When parts of a facility's design are copied from one project to the next, the previously developed schedules could possibly be reused to schedule future work. This dissertation presents a construction planner and scheduler, named CasePlan, that automates the planning and scheduling process through the use of experience encoded in cases. CasePlan enables a contractor to specify a facility design using a product model, describe the relationships between product components and parts of a schedule (e.g., activity subnetworks, construction crews), and store this information as a case. As a decision support tool, CasePlan enables the contractor to search for cases whose facility designs are similar to that of a new project. The similarity assessment is based on the relative importance values that the contractor assigns to the components and their attributes in the product model. As an automation tool, CasePlan creates the schedule of a new project by reusing parts of the schedules whose associated designs are most similar to that project's design. The result is a schedule in which construction alternatives are chosen from those used in previous cases based on the new project scheduling constraints. The contractor / system-user can interact with CasePlan during its operation or modify the resulting schedule to add detail needed for executing the schedule in the field. Two types of construction projects have been studied for the development of CasePlan. One is the Kit-of-Parts post offices, in which designs are made by reusing design modules defined as Parts. The other is the boiler erection for fossil-fueled power plants, in which the design process is standardized and component configurations are similar across designs. These projects were chosen because their schedules are similar within each project type, which suggested that practitioners had a high incentive and were likely to reuse schedules. CasePlan's similarity assessment for boiler erection projects was validated using a survey. CasePlan's schedules and usability was subjectively evaluated also by the interviewed professionals.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	695f
authors	Galle, P.
year	1995
title	Towards integrated, intelligent, and compliant computer modeling of buildings
source	Automation in Construction 4 (3) (1995) pp. 189-211
summary	This paper is a survey of current research into computer modeling of buildings. Just as much, however, it is a contribution to a debate on the future of this field of research (and as such expresses the author's opinions, rather than mere facts). It is suggested that more research should be conducted in a top-down "'problem-driven" (rather than in a bottom-up. "technology-driven") manner. As the goal of future research, ten desirable system properties are proposed and grouped together under three headings: integration. intelligence", and compliance. A critical survey of the current state-of-the-art of computer modeling of buildings is given, to assess how far we are from systems with such properties. On that background problems are discussed which are major obstacles to the proposed kind of systems (hence good starting points lot problem-driven research and some ways of approaching these problems are briefly evaluated.
keywords	Computer Modeling of Buildings; Product Modeling: Computer Aided Building Design; Critical Survey; Goal-Setting Debate; Concurrency Control: Integrity Constraint Management; Representation; Complexity of Representations
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:47

_id	7c32
authors	Hovestadt,V., Gramberg, O. and Deussen, O.
year	1995
title	Hyperbolic User Interfaces for Computer Aided Architectural Design Short Papers: Drawing, Painting and Sketching
source	Proceedings of ACM CHI'95 Conference on HumanFactors in Cmputing Systems 1995 v.2 pp. 304-305
summary	We present basic ideas and a prototypical implementation of a graphical user interface intended for the architectural design process. The interface integrates CAD-like object manipulation and navigation through large data sets. Navigation and working area are not separated as done in prior work. Geometric transformations produce a deformed but controllable display of the data in the border area of the working window while normal working is possible in the untransformed center. The arrangement allows the user to shift directly from construction tasks to navigation tasks. Data reduction techniques have been implemented in order to reduce the cost of transformation and display.
keywords	Information Visualization; Fisheye Technique; Focus+Context Technique, Interaction
series	other
last changed	2002/07/07 16:01

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	700a
authors	Martini, Kirk
year	1995
title	Hierarchical geometric constraints for building design
source	Computer-Aided Design, Vol. 27 (3) (1995) pp. 181-191
summary	Research and applications in parametric manipulation of geometry through constraints has been applied to the description of individual parts, and to the configuration of rigidparts within an assembly. Manipulating the geometry of an assembly such as a building often requires accounting for interaction between constraints governing shape andthose governing location. Most approaches use a nonhierarchical organization of constraints which makes it difficult to account for interaction of shape and locationconstraints. The paper describes a hierarchical constraint approach and implementation which addresses these issues.
keywords	Geometric Constraints, Assembly Modelling, Building Design
series	journal paper
last changed	2003/05/15 21:33

_id	e655
authors	Paoluzzi, A., Pascucci, V. and Vicentino, M.
year	1995
title	Geometric programming: A programming approach to geometric design
source	ACM Transactions on Graphics
summary	This article presents a functional programming approach to geometric design with embedded polyhedral complexes. Its main goals are to show the expressive power of the language as well as its usefulness for geometric design. The language, named PLASM (the Programming LAnguage for Solid Modeling), introduces a very high level approach to "constructive" or "generative" modeling. Geometrical objects are generated by evaluating some suitable language expressions. Because generating expressions can be easily combined, the language also extends the standard variational geometry approach by supporting classes of geometric objects with varying topology and shape. The design language PLASM can be roughly considered as a geometry-oriented extension of a subset of the functional language FL. The language takes a dimension-independent approach to geometry representation and algorithms. In particular it implements an algebraic calculus over embedded polyhedra of any dimension. The generated objects are always geometrically consistent because the validity of geometry is guaranteed at a syntactical level. Such an approach allows one to use a representation scheme which is weaker than those usually adopted in solid modelers, thus encompassing a broader geometric domain, which contains solids, surfaces, and wire-frames, as well as higher-dimensional objects.
series	journal paper
last changed	2003/04/23 15:50

_id	ff2e
authors	Paoluzzi, Alberto and Pascucci, Valerio and Sansoni, Claudio
year	1995
title	Prototype Shape Modeling with a Design Language
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 59-75
summary	A programming approach to the rapid prototyping of architectural design is discussed in this paper. This is done with particular reference to the early steps of design development, where a number of preliminary design alternatives should be generated and evaluated. At this purpose we show that the generation of the 3D shape of each design alternative can be automated starting from the 2D layout of plans, sections and elevations. Each such geometric object can be symbolically defined with few lines of code using design variables and constraint operators. The 3D models generated by evaluation of program scripts may then be used as input to standard engineering evaluation methods concerning costs, heat exchanges and structural behaviour.
series	CAAD Futures
last changed	1999/08/03 17:16

_id	d935
authors	Pasko, A.A., Adzhiev, V.D., Sourin, A.I. and Savchenko, V.V.
year	1995
title	Function representation in geometric modeling: concepts, implementation and applications
source	The Visual Computer, 11 (8) 429-446
summary	Geometric modeling using continuous real functions of several variables is discussed. Modeling concepts include sets of objects, operations and relations. An object is a closed point set of n-dimensional Euclidean space with a defining inequality f x x xn ( , ,..., ) 1 2 0 °Ÿ . Transformations of a defining function are described for the set-theoretic operations, blending, offsetting, bijective mapping, projection, Cartesian product and metamorphosis. Inclusion, point membership and intersection relations are described. In the implemented interactive modeling system, we use highlevel geometric language that provides extendibility of the modeling system by input symbolic descriptions of primitives, operations and predicates. This approach supports combinations of representational styles, including constructive geometry, sweeping, soft objects, voxel-based objects, deformable and other animated objects. Application examples of aesthetic design, collisions simulation, NC machining, range data processing, and 3D texture generation are given.
series	journal paper
last changed	2003/04/23 15:50

_id	623e
authors	Arumi-Noe, Francisco
year	1995
title	Algorithm For The Automatic Design Of A Shading Device
doi	https://doi.org/10.52842/conf.acadia.1995.233
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 233-242
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
keywords	Energy Conscious Design, Green Architecture, Sustainable Architecture, Solar Design, Computer Aided Design
series	ACADIA
last changed	2022/06/07 07:54

_id	c2bd
authors	Belblidia, Salim and Perrin, Jean-Pierre
year	1995
title	Multi-Resolution Rendering of Architectural Models
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 231-239
summary	This paper presents a method for representing complex models with various levels of detail. It is based on a geometric simplification algorithm and is applied to a scene described by a rooted-tree structure. In order to control the restuting image quality and the computation time, we propose two algorithms which allow to choose one representation of the scene.
keywords	Computer Graphics, Image Synthesis, Realistic Rendering, Real-Time Rendering, Computer Aided Architectural Design
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e100
authors	Bermudez, Julio and King, Kevin
year	1995
title	Architecture in Digital Space: Actual and Potential Markets
doi	https://doi.org/10.52842/conf.acadia.1995.405
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 405-423
summary	As both the skepticism and 'hype' surrounding electronic environments vanish under the weight of ever increasing power, knowledge, and use of information technologies, the architectural profession must prepare for significant expansion of its professional services. To address the issue, this paper offers a survey of the professional services architects and designers do and may provide in digital space, and who the potential clients are. The survey was conducted by interviews with software developers, gaming companies, programmers, investigators, practicing architects, faculty, etc. It also included reviews of actual software products and literary research of conference proceedings, journals, books and newspapers (i.e. articles, classified ads, etc.). The actual and potential markets include gaming and entertainment developments, art installations, educational applications, and research. These markets provide architects the opportunity to participate in the design of 3D gaming environments, educational software, architecture for public experience and entertainment, data representation, cyberspace and virtual reality studies, and other digital services which will be required for this new world. We will demonstrate that although the rapidly growing digital market may be seen by some to be non-architectural and thus irrelevant to our profession, it actually represents great opportunities for growth and development. Digital environments will not replace the built environment as a major architectural market, but they will significantly complement it, thus strengthening the entire architectural profession.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	aab6
authors	Bermudez, Julio
year	1995
title	Designing Architectural Experiences: Using Computers to Construct Temporal 3D Narratives
doi	https://doi.org/10.52842/conf.acadia.1995.139
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 139-149
summary	Computers are launching us into a representational revolution that fundamentally challenges the way we have hitherto conceived and practiced architecture. This paper will explore one of its fronts: the simulation of architectural experiences. Today's off-the-shelf softwares (e.g. 3D modeling, animations, multimedia) allow us for first time in history to depict and thus approach architectural design and criticism truly experientially. What is so appealing about this is the possibility of shifting our attention from the object to the experience of the object and in so doing reconceptualizing architectural design as the design of architectural experiences. Carrying forward such a phenomenological proposition requires us to know (1) how to work with non-traditional and 'quasi-immersive' (or subject-centered) representational systems, and (2) how to construct temporal assemblages of experiential events that unfold not unlike 'architectural stories'. As our discipline lacks enough knowledge on this area, importing models from other fields appears as an appropriate starting point. In this sense, the narrative arts (especially those involved with the temporal representation of audio-visual narratives) offer us the best insights. For example, principles of cinema and storytelling give us an excellent guidance for designing architectural experiences that have a structuring theme (parti), a plot (order), unfolding episodes (rhythm), and special events (details). Approaching architecture as a temporal 3D narrative does transform the design process and, consequently, its results. For instance, (1) phenomenological issues enter the decision making process in an equal footing to functional, technological, or compositional considerations; (2) orthographic representations become secondary sources of information, mostly used for later accurate dimensioning or geometrization; (3) multi-sensory qualities beyond sight are seriously considered (particularly sound, texture, and kinesthetic); etc.
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: