Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 364

Reformat results as: short short into frame detailed detailed into frame

_id	95b9
authors	Devernay, F. and Faugeras, O.
year	1995
title	Automatic Calibration and Removal of Distortion from scenes of structured environments
source	Proceedings of the SPIE Conference on Investigate and Trial Image Processing, 2567, SPIE, San Diego, CA, July 1995
summary	Most algorithms in 3-D Computer Vision rely on the pinhole camera model because of its simplicity, whereas video optics, especially low-cost wide-angle lens, generate a lot of non-linear distortion which can be critical. To ønd the distortion parameters of a camera, we use the following fundamental property: a camera follows the pinhole model if and only if the projection of every line in space onto the camera is a line. Consequently, if we ønd the transformation on the video image so that every line in space is viewed in the transformed image as a line, then we know how to remove the distortion from the image. The algorithm consists of ørst doing edge extraction on a possibly distorted video sequence, then doing polygonal approximation with a large tolerance on these edges to extract possible lines from the sequence, and then ønding the parameters of our distortion model that best transform these edges to segments. Results are presented on real video images, compared with distortion c...
series	other
last changed	2003/04/23 15:14

_id	47c7
authors	Fasse, Isabelle and Paul, Jean Claude
year	1995
title	Realistic Rendering and Computer-Aided Lighting Design in Architecture
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 241-255
summary	This paper presents an application of realistic rendering to computer aided design in architecture. The application concerns lighting design of buildings. We describe a library of algorithms which allows the simulation of the light sources emittance, surfaces reflectance/transmittance, and light propagation laws. Our general algorithm can compute a physically based simulation of illumination in complex geometric models and offers the capability to change the inputs without recalculating the entire global physical solution. Since the solution is view independent, hardware graphic accelerations are then used to generate the images. Two industrial experimentations have proved that our system can help designers to evaluate small iterations in the design, as well as compare global alternative solutions. Therefore, design quality improvement can be obtained while saving the costly full scale trials that are necessary when conventional methods are used.
keywords	Computer-Aided Design, Computer Graphics, Synthesis Images, Architectural Design, Lighting Engineering
series	CAAD Futures
last changed	1999/08/03 17:16

_id	a2fc
authors	Kappel, Michael R.
year	1995
title	Shading: fitting a smooth intensity surface
source	Computer-Aided Design, Vol. 27 (8) (1995) pp. 595-603
summary	Visual realism in computer-generated images is an important goal for many computer applications. However, a tradeoff exists between the degree of realism achieved and thetime required to generate an image. Thus efficient algorithms for generating realistic images are being actively investigated.Shading is one graphical technique for rendering more realistic images of 3D objects. However, the most widely used algorithm, Gouraud shading, suffers from the Machband effect, a perceptual phenomenon that reduces realism. Gouraud shading also handles specular reflection poorly. The next most popular algorithm, Phong shading,generally reduces Mach banding and captures specular highlights, though at great computational expense. Bishop and Weimer improved the efficiency of Phong shading, buttheir algorithm introduces approximation error and is still significantly slower than Gouraud shading.A new algorithm is proposed which takes an innovative approach to shading 3D objects. A smooth intensity surface is generated with a known surface-fitting technique,Powell-Sabin quadratic interpolation. The intensity surface is generated at a modest cost using the Cendes-Wong formulae and forward differencing. The C1 surface virtuallyeliminates Mach banding.
keywords	Shading
series	journal paper
last changed	2003/05/15 21:33

_id	7670
authors	Sawicki, Bogumil
year	1995
title	Ray Tracing – New Chances, Possibilities and Limitations in AutoCAD
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 121-136
summary	Realistic image synthesis is nowadays widely used in engineering applications. Some of these applications, such as architectural, interior, lighting and industrial design demand accurate visualization of non-existent scenes as they would look to us, when built in reality. This can only be archived by using physically based models of light interaction with surfaces, and simulating propagation of light through an environment. Ray tracing is one of the most powerful techniques used in computer graphics, which can produce such very realistic images. Ray tracing algorithm follows the paths of light rays backwards from observer into the scene. It is very time consuming process and as such one could not be developed until proper computers appeared, In recent years the technological improvements in computer industry brought more powerful machines with bigger storage capacities and better graphic devices. Owing to increasing these hardware capabilities successful implementation of ray tracing in different CAD software became possible also on PC machines. Ray tracing in AutoCAD r.12 - the most popular CAD package in the world - is the best of that example. AccuRender and AutoVision are an AutoCAD Development System (ADS) applications that use ray tracing to create photorealistic images from 3D AutoCAD models. These ,internal"' applications let users generate synthetic images of threedimensional models and scenes entirely within AutoCAD space and show effects directly on main AutoCAD screen. Ray tracing algorithm accurately calculates and displays shadows, transparency, diffusion, reflection, and refraction from surface qualities of user-defined materials. The accurate modelling of light lets produce sophisticated effects and high-quality images, which these ray tracers always generates at 24-bit pixel depth,"providing 16,7 million colours. That results can be quite impressive for some architects and are almost acceptable for others but that coloured virtual world, which is presented by ray tracing in AutoCAD space in such convincing way, is still not exactly the same as the real world. Main limitations of realism are due to the nature of ray tracing method Classical ray tracing technique takes into account the effects of light reflection from neighbouring surfaces but, leaves out of account the ambient and global illumination arising out of complex interreflections in an environment. So models generated by ray tracing belong to an "ideal" world where real materials and environment can't find their right place. We complain about that fact and say that ray tracing shows us "too specular world", but (...) (...) there is anything better on the horizon? It should be concluded, that typical abilities of today's graphics software and hardware are far from exploited. As was observed in literature there have been various works carried along with the explicit intention of overcoming all these ray tracing limitations, These researches seem to be very promising and let us hope that their results will be seen in CAD applications soon. As it happens with modelling, perhaps the answer will come from a variety of techniques that can be combined together with ray tracing depending on the case we are dealing with. Therefore from the point of view of an architects that try to keep alive some interest on the nature of materials and their interaction with form, "ray tracing" seems to be right path of research and development that we can still a long way follow, From the point of view of the school, a critical assimilation of "ray tracing" processes is required and one that might help to determinate exactly their distortions and to indicate the correct way of its development and right place in CAAD education. I trust that ray tracing will become standard not only in AutoCAD but in all architectural space modelling CAD applications and will be established as a powerful and real tool for experimental researches in architectural design process. Will be the technological progress so significant in the nearest future as it is anticipated?
series	plCAD
last changed	2000/01/24 10:08

_id	0c8e
authors	Ager, Mark Thomas and Sinclair, Brian R.
year	1995
title	StereoCAD: Three Dimensional Representation
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 343-355
summary	Concepts of stereoscopic vision have been around for more than two thousand years. Despite this long history, its application to the field to architecture and design seems relatively unexplored. Synthesis of two technologies, the stereoscope and the computer, was the focus of the present study. The goal of the research was to determine if computer-generated stereoscopic pairs hold value for architectural design. Using readily available computer technology (Apple Macintosh) the research team modelled and rendered an existing project to verify the degree of correlation between the physical construct, the computer 3D model and resultant correlation between the physical construct, the computer 3D model and resultant rendered stereo-paired representation. The experiments performed in this study have shown that producing stereo-paired images that highly correlate to reality is possible using technology that is readily available in the marketplace. Both the technology required to produce (i.e., personal computer and modelling/rendering software) and view (i.e., modified stereoscope) the images is unimposing. Both devices can easily fit in a studio or a boardroom and together can be utilized effectively to permit designers, clients and end-users to experience proposed spaces and projects. Furthermore, these technologies are familiar (clients and end-users have already experienced them in other applications and settings) and assume a fraction of the cost of more dynamic, immersive virtual reality systems. Working from this base, limitations of the process as well as future applications of computer-generated stereoscopic images are identified.
keywords	Stereovision, Representation, Computers, Architects, Design
series	CAAD Futures
last changed	2003/11/21 15:15

_id	30d7
authors	Bartnicka, Malgorzata
year	1995
title	Childishly Honest Associate of the Trickery
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 209-219
summary	Perspective is a method of presentation of 3- dimensional space on the 2-dimensional surface. It can only approximately express the complexity of the authentic perception of reality. During the centuries canons of presentation varied in different epochs. It is quite possible that conventions of presentation considered today as exact expressions of reality may seem for the future generations as untrue as the ancient Egypt paintings seem for us. Our mind plays the major role in all kinds of presentation. During the whole life we learn to perceive the surrounding reality. We have formed also ability to ,see" the perspective. The linear perspective is not so easy in perception without factors of colour and light. These factors play a very important role in perception of the distance. The perception of perspective is not always unmistakable. Introduction of light and shadow is one of the measures to limit the ambiguity. Objects shown in perspective with appropriately chosen colouring and light-and-shade effects reveal impression of the distance inside the flat picture. Illusions of perspective are most astonishing when one can assume deep-rooted expectations and suppositions of the addressee. The computer monitor, like the picture, has only one plane on which our project can be presented. The major feature of architecture programs is both the possibility of creating various architecture spaces and the possibility to examine how (in our opinion) the created space would affect the addressee. By means of computer programs we are able to generate drawings and objects of two kinds: first - being the ideal projection of reality (at least in the same measure as the photograph), and the second - being the total negation of perspective rules. By means of CAD programs enabling 3-dimensional job we can check how all sorts of perspective tricks and artifices affect our imagination. The program cooperates with us trying to cheat the imperfect sense of sight. The trickeries can be of various type, starting from play of lights, through the elements changing the perception of perspective, and terminating with objects totally negating the rules of sound construction of solids. The knowledge contained in these programs is an encyclopaedic recapitulation of all sorts of achievements in the field of perspective and application of colour and light effects. All that remains to the users is to exploit this tremendous variety of capabilities.
series	plCAD
last changed	2000/01/24 10:08

_id	cb18
authors	Belibani, R., Gadola, A. and Marinelli, A.
year	1995
title	Hypervisible Cities: Seville, Barcelona, Lisbon
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 161-168
doi	https://doi.org/10.52842/conf.ecaade.1995.161
summary	The Hypertext 'HYPERVISIBLE CITIES: SEVILLE, BARCELONA, LISBON" was realised within the interuniversity scientific research "La Prodazione dei circuiti multimediali didattici per l'architettura e l'urbanisticai (The production of multimedia didactic circuits for architecture and urban planning), co-ordinator Prof Paola Coppola Pignatelli - Dipartimento di Progettozione Architettonica e Urbana - Facolta di Architettura, Universita "La Sapienza", Roma, Italia. The aim of the research is the representation through the hypermedia tool of the significant of the cities, perceived through their images. The hypertext it has been attempted to make hypervisible three major cities - Seville, Barcelona, Lisbon - through a horizontal/vertical reading, according to three directions of probing, for comparisons purposes among different methods of growth of the city form.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_21.htm
last changed	2022/06/07 07:54

_id	4931
authors	Breen, Jack
year	1996
title	Learning from the (In)Visible City
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 65-78
doi	https://doi.org/10.52842/conf.ecaade.1996.065
summary	This paper focuses on results and findings of an educational project, in which the participating students had to develop a design strategy for an urban plan by using and combining endoscopic and computational design visualisation techniques. This educational experiment attempted to create a link between the Media research programme titled 'Dynamic Perspective' and an educational exercise in design composition. It was conceived as a pilot study, aimed at the investigation of emerging applications and possible combinations of different imaging techniques which might be of benefit in architectural and urban design education and potentially for the (future) design practice. The aim of this study was also to explore the relationship between spatial perception and design simulation. The point of departure for the student exercise was an urban masterplan which the Dynamic Perspective research team prepared for the workshop 'the (in)visible city' as part of the 1995 European Architectural Endoscopy Association Conference in Vienna, Austria. The students taking part in the exercise were asked to develop, discuss and evaluate proposals for a given part of this masterplan by creating images through different model configurations using optical and computer aided visualisation techniques besides more traditional design media.The results of this project indicate that an active and combined use of visualisation media at a design level, may facilitate communication and lead to a greater understanding of design choices, thus creating insights and contributing to design decision-making both for the designers and for the other participants in the design process.
series	eCAADe
email
more	http://www.bk.tudelft.nl/Media/
last changed	2022/06/07 07:54

_id	07de
authors	Cheng, Nancy Yen-wen
year	1995
title	Linking the Virtual to Reality: CAD & Physical Modeling
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 303-311
summary	Using both study models and digital models for schematic design allows us to take advantage of the strengths of each. Models constructed manually benefit from spontaneous juxtapositions and serendipitous interactions with light and gravity. Converting these models into the digital realm allows the computer to take over in areas that it does best: geometric transformation, rigorous analysis, elaboration and co-ordination of details and complexity. As a project develops, CAD/CAM methods can generate forms or components for verifying the virtual representation. The paradigm of porting data to appropriate software tools needs to be extended to exporting out of and into the physical realm. Connecting to models in real space allows us to use senses that are not yet completely addressed by digital models.
keywords	Modeling, Representation, Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	00ce
authors	Cicognani, Anna
year	1995
title	The New Challenge of Learning
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 37-42
doi	https://doi.org/10.52842/conf.ecaade.1995.037
summary	The World Wide Web offers us a new way of hunting for information. If we compare Internet to an ocean, "surfing" is perhaps the right word to use for describing this hunting process. The 'power" of the Web lies in its friendly interface and in its potential to provide users with high impact documents, pictures, animation and sound. The hypertext nature of the Web allows us to create an on-going set of links which refer to and connect sites all over the world. Researchers and students can use this tool not only for gathering information, but also for publishing their works and "peering" with the works of others. The challenge, then, is to generate new interest around getting information. Students seem to have more motivations in learning whilst experimenting. And the Web is a good place to start.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_5.htm
last changed	2022/06/07 07:56

_id	30ec
authors	Coates, Paul and Hall, Miles Robin
year	1995
title	The Use of CAAD to Generate Urban Form
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 599-616
summary	The paper describes a computer modelling process suitable for the generation of townscape elements using a statistical simulation based on aesthetic theory in mathematics. This approach is also used to analyse existing urban settings and thereby allow comparison with the generated output of the model indicating close agreement between the model and attractive historical townscape. This agreement depends closely upon the size of the unit chosen for measurement of the existing townscape thereby determining how the output from the model should be scaled for construction. An independent low-level designing ability appears inherent in the model and there is a discussion as to how this might be further developed.
keywords	Emergent Form, Generative Model, Power Laws, Townscape, Vernacular Style
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e420
authors	Colajanni, B., Pellitteri, G. and Giacchino, V.
year	1995
title	An Hypertext in Building Rehabilitation: A Case Study in Palermo
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 29-36
doi	https://doi.org/10.52842/conf.ecaade.1995.029
summary	Hypertext is an ideal tool to teach building design inasmuch as it allows both teacher driven and student self driven learning. It allows to link every type of informations (texts, sounds, images, films) with associative mechanisms much like those utilized by our brain. Hypertextes buikt up for teaching purposen can be usefully employed in professional occurrencies. An example is shown dealing with the rehabilitation of the Fiumetorto Palace in the historical centre of Palermo. It manages in a simple but efficient way the many complex interconnections between analysis of the state of decay, history, town planning rules and technology focusing all the information on the rehabilitation task.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_4.htm
last changed	2022/06/07 07:56

_id	80df
authors	Cook, Alan R.
year	1995
title	Stereopsis in the Design and Presentation of Architectural Works
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 113-137
doi	https://doi.org/10.52842/conf.acadia.1995.113
summary	This article presumes the primacy of spatial cognition in evaluating architectural designs and begins by describing key concepts involved in the perception of spatial form, focussing on parallax and stereoscopy. The ultimate emphasis is directed at presenting techniques which employ computers with modest hardware specifications and a basic three-dimensional modeling software application to produce sophisticated imaging tools. It is argued that these techniques are comparable to high end computer graphic products in their potentials for carrying information and in some ways are superior in their speed of generation and economies of dissemination. A camera analogy is considered in relation to controlling image variables. The ability to imply a temporal dimension is explored. An abbreviated summary of pertinent binocular techniques for viewing stereograms precedes a rationalization and initiation for using the cross-convergence technique. Ways to generate and view stereograms and other multiscopic views using 3-D computer models are described. Illustrations from sample projects show various levels of stereogram rendering including the theoretically 4-D wireframe stereogram. The translated perspective array autostereogram is presented as an economical and easily reproducible alternative to holography as well as being a substitute for stop action animation.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	1586
authors	Counsell, John A M
year	1995
title	GIS Software and Coordinated Project Information Systems - A Mechanism for Increasing the Effectiveness of 3D CAAD Models
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 389-397
summary	This paper reviews current 3D CAD building modelling by reference to a large ongoing case study, in which 3D building models and sites are used to generate coordinated drawing, schedule, and visualisation output. It focuses on barriers which current software interpose, preventing more complete use of 3D CAD to integrate building project information systems. Comparisons are made with tools and methodology developed in GIS, in which users make different selections as required from common databases, and it is argued that used in conjunction with 3D CAD building models, they could improve functionality and reduce barriers to effective deployment.
keywords	Building Model, Coordinated Information Systems
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c68b
authors	De Cola, S., La Franca, R., Latona, D. and Parlato, W.
year	1995
title	Hypa - An Hypertext System about the Urban Growth of the City of Palermo
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 21-28
doi	https://doi.org/10.52842/conf.ecaade.1995.021
summary	At the Department of Representation at the University of Palermo an hypertext about the evolution of the city of Palermo has been developed. The system told the events that marked the evolution of the city by images and text. The hypertetx structure allow the reader to paginate the story following different need and/or curiosity. The system is open so it is possible to maintain the data base and to update it with specific contribution (degree thesis or reseurch) or whit the addition of new data related to already developed themes.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_3.htm
last changed	2022/06/07 07:55

_id	27b5
authors	Dießenbacher, Claus and Rank, Ernst
year	1995
title	A Multimedia Archaeological Museum
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 13-20
doi	https://doi.org/10.52842/conf.ecaade.1995.013
summary	This paper will present a project, which was first initiated in 1994 as a graduate students seminar and is now being continued as a research project in a cooperation of computer scientists, architects and archaeologists. An ancient roman city (Colonia Ulpia Traiana near todays Xanten in Germany) has been reconstructed, using various levels of abstraction. On the coarsest level, a 3D-model of the whole city was established, distinguishing between different historical periods of the city. The second level picks places of special interest (temples, the forum, the amphitheater, the townbaths etc.) and reconstructs these buildings or groups of buildings. On the finest level important interior parts or functional details like the Hypocaustae in the town-baths are modelled. All reconstructions are oriented as close as possible to results from excavations or other available documents. All levels of the 3D-model have been visualized using photorealistic images and sequences of video animations. The 3D model is integrated into a multimedia environment, augmenting the visualization elements with plans of the city and individual buildings and with text documents. It is intended, that parts of the outlined system will be available at the site of the ancient city, where today a large public archaeological park is located.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_2.htm
last changed	2022/06/07 07:55

_id	683a
authors	Do, Ellen Yi-Luen and Gross, Mark D.
year	1995
title	Shape Based Reminding as an Aid to Creative Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 79-89
summary	This paper describes "Drawing Analogies", a shape based reminding program that uses freehand sketches to index and retrieve visual references for creative designing. Architects often employ reference images from books, magazines, and other visual collections to find forms they can adopt and adapt into their designs. We give examples of how designers use drawing and analogies and describe our approach to finding similar drawings. We argue that a graphical reminding scheme based on sketching can help designers find interesting references from various domains.
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	819d
authors	Eiteljorg, H.
year	1988
title	Computing Assisted Drafting and Design: new technologies for old problems
source	Center for the study of architecture, Bryn Mawr, Pennsylvania
summary	In past issues of the Newsletter, George Tressel and I have written about virtual reality and renderings. We have each discussed particular problems with the technology, and both of us mentioned how compelling computer visualizations can be. In my article ("Virtual Reality and Rendering," February, 1995, Vol. 7, no. 4), I indicated my concerns about the quality of the scholarship and the level of detail used in making renderings or virtual worlds. Mr. Tressel (in "Visualizing the Ancient World," November, 1996, Vol. IX, no. 3) wrote about the need to distinguish between real and hypothetical parts of a visualization, the need to differentiate materials, and the difficulties involved in creating the visualizations (some of which were included in the Newsletter in black-and-white and on the Web in color). I am returning to this topic now, in part because the quality of the images available to us is improving so fast and in part because it seems now that neither Mr. Tressel nor I treated all the issues raised by the use of high-quality visualizations. The quality may be illustrated by new images of the older propylon that were created by Mr. Tressel (Figs. 1 - 3); these images are significantly more realistic than the earlier ones, but they do not represent the ultimate in quality, since they were created on a personal computer.
series	other
last changed	2003/04/23 15:50

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: