Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 393

Reformat results as: short short into frame detailed detailed into frame

_id	d6d8
authors	Flemming, Ulrich and Woodbury, Robert
year	1995
title	Software Environment to Support Early Phases in Building Design (SEED): Overview
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 147-152
summary	This paper describes the overall goals of SEED, the approach taken by its developers to achieve these goals, and the subprojects that comprise the entire project. SEED aims at providing computational support forthe early design phase in all aspects that can benefit from such support. It addresses specifically architectural programming, schematic layout design, and the generation of a fully three-dimensional configuration ofphysical building components like structure and enclosure. These tasks are handled by three individual modules, SEED-Pro, SEED-Layout, and SEED-Config. A standards processor is under development tosupport standards and code checking in any module, as is an object database to store and retrieve different design versions, alternatives, and past designs that can be reused and adapted in different contexts(case-based design). Usability issues, especially the interfaces to the modules, receive special attention. Subsequent papers elaborate on these efforts in greater detail. The present paper provides an overview of theentire project and introduces shared concepts presumed known in subsequent papers.
series	journal paper
email
last changed	2003/05/15 21:45

_id	ac5e
authors	Hirschberg, Urs and Streilein, André
year	1995
title	CAAD Meets Digital Photogrammetry: Modeling "Weak Forms" for Computer Measurement
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 299-313
doi	https://doi.org/10.52842/conf.acadia.1995.299
summary	The integration of state-of-the-art photogrammetric methods with the capabilities of CAAD has great potential for a variety of architectural applications. This paper describes the current status of an ongoing research project which aims to develop an easy to use tool for the photogrammetric generation of accurate, reliable and well structured 3D CAAD models of architectural objects. The project adresses the whole range of issues that arise from the digital image acquisition to the data processing, the data integration between photogrammetry and CAAD and the architectural structuring of the geometric data. While also giving a brief overview of the project, the paper concentrates on one central aspect of the system: a method to model what we will define as "weak forms" as the basis for qualitatively controlled computer measurement.
keywords	Digital Architectural Photogrammetry, Constraint-Based Modelling
series	ACADIA
email
last changed	2022/06/07 07:50

_id	cc8b
authors	Koutamanis, Alexander
year	1995
title	Background Information Systems
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 231-242
doi	https://doi.org/10.52842/conf.ecaade.1995.231
summary	Information systems increasingly appear as core elements of computer-aided architectural design environments. They provide the input and accommodate the output of automated and interactive procedures. The paper proposes the development of architectural information systems as an unobstrusive multimedia infrastructure in the background of specialized programs used for performing specific design t.asks. Background multimedia systems facilitate communication between specialized programs by means of their compound representations. These combine different types of information and provide an overview of the overall system and of the processes implemented in it.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_29.htm
last changed	2022/06/07 07:51

_id	0c8e
authors	Ager, Mark Thomas and Sinclair, Brian R.
year	1995
title	StereoCAD: Three Dimensional Representation
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 343-355
summary	Concepts of stereoscopic vision have been around for more than two thousand years. Despite this long history, its application to the field to architecture and design seems relatively unexplored. Synthesis of two technologies, the stereoscope and the computer, was the focus of the present study. The goal of the research was to determine if computer-generated stereoscopic pairs hold value for architectural design. Using readily available computer technology (Apple Macintosh) the research team modelled and rendered an existing project to verify the degree of correlation between the physical construct, the computer 3D model and resultant correlation between the physical construct, the computer 3D model and resultant rendered stereo-paired representation. The experiments performed in this study have shown that producing stereo-paired images that highly correlate to reality is possible using technology that is readily available in the marketplace. Both the technology required to produce (i.e., personal computer and modelling/rendering software) and view (i.e., modified stereoscope) the images is unimposing. Both devices can easily fit in a studio or a boardroom and together can be utilized effectively to permit designers, clients and end-users to experience proposed spaces and projects. Furthermore, these technologies are familiar (clients and end-users have already experienced them in other applications and settings) and assume a fraction of the cost of more dynamic, immersive virtual reality systems. Working from this base, limitations of the process as well as future applications of computer-generated stereoscopic images are identified.
keywords	Stereovision, Representation, Computers, Architects, Design
series	CAAD Futures
last changed	2003/11/21 15:15

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
doi	https://doi.org/10.52842/conf.ecaade.1995.003
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	623e
authors	Arumi-Noe, Francisco
year	1995
title	Algorithm For The Automatic Design Of A Shading Device
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 233-242
doi	https://doi.org/10.52842/conf.acadia.1995.233
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
keywords	Energy Conscious Design, Green Architecture, Sustainable Architecture, Solar Design, Computer Aided Design
series	ACADIA
last changed	2022/06/07 07:54

_id	30d7
authors	Bartnicka, Malgorzata
year	1995
title	Childishly Honest Associate of the Trickery
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 209-219
summary	Perspective is a method of presentation of 3- dimensional space on the 2-dimensional surface. It can only approximately express the complexity of the authentic perception of reality. During the centuries canons of presentation varied in different epochs. It is quite possible that conventions of presentation considered today as exact expressions of reality may seem for the future generations as untrue as the ancient Egypt paintings seem for us. Our mind plays the major role in all kinds of presentation. During the whole life we learn to perceive the surrounding reality. We have formed also ability to ,see" the perspective. The linear perspective is not so easy in perception without factors of colour and light. These factors play a very important role in perception of the distance. The perception of perspective is not always unmistakable. Introduction of light and shadow is one of the measures to limit the ambiguity. Objects shown in perspective with appropriately chosen colouring and light-and-shade effects reveal impression of the distance inside the flat picture. Illusions of perspective are most astonishing when one can assume deep-rooted expectations and suppositions of the addressee. The computer monitor, like the picture, has only one plane on which our project can be presented. The major feature of architecture programs is both the possibility of creating various architecture spaces and the possibility to examine how (in our opinion) the created space would affect the addressee. By means of computer programs we are able to generate drawings and objects of two kinds: first - being the ideal projection of reality (at least in the same measure as the photograph), and the second - being the total negation of perspective rules. By means of CAD programs enabling 3-dimensional job we can check how all sorts of perspective tricks and artifices affect our imagination. The program cooperates with us trying to cheat the imperfect sense of sight. The trickeries can be of various type, starting from play of lights, through the elements changing the perception of perspective, and terminating with objects totally negating the rules of sound construction of solids. The knowledge contained in these programs is an encyclopaedic recapitulation of all sorts of achievements in the field of perspective and application of colour and light effects. All that remains to the users is to exploit this tremendous variety of capabilities.
series	plCAD
last changed	2000/01/24 10:08

_id	d7eb
authors	Bharwani, Seraj
year	1996
title	The MIT Design Studio of the Future: Virtual Design Review Video Program
source	Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary	The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series	other
last changed	2002/07/07 16:01

_id	276c
authors	Breen, Jack
year	1995
title	Dynamic Perspective: The Media Research Programme
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	This paper focuses on the Research Programme of the Media Sector at the Faculty of Architecture, Delft University of Technology. The media research objectives for the coming years have been brought together with an overall project: “Dynamic Perspective”. The “dynamic” quality may be interpreted both as movement (visual displacement and registration) and as change (the effects of different options). The four projects which together make up this research programme deal with perception (understanding) and conception (designing and imaging) of urban space: “the architecture of the city”. Specific aspects are the effects of primary and secondary spatial boundaries and the systematic structuring of simulation of visual information. The programme will further concentrate on the development and implementation of relevant techniques (besides “traditional” ones such as the drawing and the architectural model, on multimedia techniques such as endoscopy, computer visualization and development of virtual reality systems), both in education and in design practice. By means of analysis, the creation of visual models of choice and the setting up of experiments, the programme aims at the furthering of theoretical knowledge and at acquiring better insights into the effects of design decisions at an urban level, both for designers and for other participants in the design process. Further development of existing laboratory facilities towards a comprehensive Design Simulation Laboratory is an important aspect of the programme. Within the media research process the Aspern location master plan has been considered as a case study, the findings of which will be presented separately in the workshop sessions.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	4931
authors	Breen, Jack
year	1996
title	Learning from the (In)Visible City
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 65-78
doi	https://doi.org/10.52842/conf.ecaade.1996.065
summary	This paper focuses on results and findings of an educational project, in which the participating students had to develop a design strategy for an urban plan by using and combining endoscopic and computational design visualisation techniques. This educational experiment attempted to create a link between the Media research programme titled 'Dynamic Perspective' and an educational exercise in design composition. It was conceived as a pilot study, aimed at the investigation of emerging applications and possible combinations of different imaging techniques which might be of benefit in architectural and urban design education and potentially for the (future) design practice. The aim of this study was also to explore the relationship between spatial perception and design simulation. The point of departure for the student exercise was an urban masterplan which the Dynamic Perspective research team prepared for the workshop 'the (in)visible city' as part of the 1995 European Architectural Endoscopy Association Conference in Vienna, Austria. The students taking part in the exercise were asked to develop, discuss and evaluate proposals for a given part of this masterplan by creating images through different model configurations using optical and computer aided visualisation techniques besides more traditional design media.The results of this project indicate that an active and combined use of visualisation media at a design level, may facilitate communication and lead to a greater understanding of design choices, thus creating insights and contributing to design decision-making both for the designers and for the other participants in the design process.
series	eCAADe
email
more	http://www.bk.tudelft.nl/Media/
last changed	2022/06/07 07:54

_id	00f4
authors	Brown, Andre G.P. and Knight, Mike
year	1995
title	An Integrated Hypermedia Project
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 111-116
doi	https://doi.org/10.52842/conf.ecaade.1995.111
summary	This paper describes how Hypermedia can be used as unifying tool, marrying together many strands of work related to architectural design and CAD. The project which we describe was undertaken with fourth year students at the University of Liverpool and is entitled the Electronic City. It is founded on the premise of assembling a Hypermedia package which describes the city and its architecture to a lay person. There are two strands to the project, the Hypermedia strand and a graphics/CAD strand. At the end the task was then to stitch the strands together to produce a common, coherent Hypermedia package. At the end of the project we expect that the students will have developed skills and an appreciation of: (-) the architecture and history of the city (-) the design of Hypermedia interfaces (-) the design of Information structures (-) three dimensional modelling and rendering
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_15.htm
last changed	2022/06/07 07:54

_id	7555
authors	Brown, F., Cooper, G., Ford, S., Aouad, G., Brandon, P., Child, T., Kirkham, J., Oxman, R. and Young, B.
year	1995
title	An integrated approach to CAD: modelling concepts in building design and construction
source	Design Studies 16 (3) (1995) pp. 327-347
summary	The ICON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different 'perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
series	journal paper
last changed	2003/05/15 21:45

_id	940c
authors	Brown, F.E. (et. al.)
year	1995
title	An integrated approach to CAD: modelling concepts in building design and construction
source	Design Studies, vol. 16
summary	The ICON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different `perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
series	journal paper
last changed	2003/04/23 15:50

_id	bf5f
authors	Chen, Xiangping
year	1995
title	Representation, Evaluation and Edition of Feature-based and Constraint- based Design
source	Purdue University
summary	This thesis investigates a general and systematic approach to feature-based and constraint-based design. We combine feature-based design and constraint-based design by globally decomposing a design into a sequence of feature attachments and locally defining and positioning each feature by constraints. Analogous to the concept of high-level programming languages, we formalize a layered design model that eliminates the dependency of a design representation on a solid modeler. With this design model, design intent, such as feature descriptions and constraints, is stored in an unevaluated, modeler-independent design representation while the geometry to which it corresponds is stored in an evaluated, modeler-dependent design representation. The separation essentially relies on a naming and matching schema that converts between a geometric reference and a generic name, and a design compiler that automatically instantiates the unevaluated design representation to an evaluated design representation with respect to a solid modeler. The geometric references for defining feature attributes and constraints are recorded with their generic names in the unevaluated design representation. We propose several techniques for naming geometric entities unambiguously. The design compilation or instantiation involves remapping a generic name back to a geometric reference in the selected geometric modeler, solving constraints and implementing feature operations or attachments. Instead of developing a constraint solver for this design compiler, we use an independent and general solver. Feature attachment operations are different from classical Boolean operations in solid modeling. However, we provide a semantics for them that is based on existing operations in solid modeling. The layered design model allows users to edit archived conceptual designs to derive new designs quickly. We investigate the coordination of later features in the unevaluated and modeler-independent representation when a feature is edited and provide a method for editing feature-based and constraint-based design. We also discuss how to extend this work to a commercial feature-based and constraint-based CAD system.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	maver_076
id	maver_076
authors	Chen, Y., Fram, I. and Maver, T.W.
year	1995
title	On the Architecture of a Computer-Mediated Collaborative Product Design Environment
source	Intelligent Manufacturing Conference (Ed: S Yang et al) Wuhan, PRC
summary	This paper describes the development of a COmputer-Mediated Collaborative Product development Environment (COMCOPE) within the context of the construction industry, a collaborative project between Anglia Polytechnic University, the University of Strathclyde and some industrial partners. The most prominent feature about COMCOPE lies in the particular emphasis on supporting human-human interaction across time and space through computer mediation within a distributed and networked environment. Based on a review of related research areas, traditional computer integrated construction concepts have been extended within the framework of computer supported cooperative work, which results in the COMCOPE conceptual architecture. As the core of COMCOPE architecture an interaction model has been developed to help articulate collaborative activities. Implementation issues have been addressed, and a prototype system, based on an augmented client-server model, has been outlined.
series	other
type	normal paper
email
last changed	2015/02/20 11:15

_id	64bf
authors	Chuah, M.C., Roth, S.F., Mattis, J., and Kolojejchick, J.A.
year	1995
title	SDM: Selective Dynamic Manipulation of Visualizations
source	Proceedings of UIST‘95, ACM Symposium on User Interface Software and Technology, Pittsburg. 61-70
summary	In this paper we present a new set of interactive techniques for 2D and 3D visualizations. This set of techniques is called SDM (Selective Dynamic Manipulation). Selective, indicating our goal for providing a high degree of user control in selecting an object set, in selecting interactive techniques and the properties they affect, and in the degree to which a user action affects the visualization. Dynamic, indicating that the interactions all occur in real-time and that interactive animation is used to provide better contextual information to users in response to an action or operation. Manipulation, indicating the types of interactions we provide, where users can directly move objects and transform their appearance to perform different tasks. While many other approaches only provide interactive techniques in isolation, SDM supports a suite of techniques which users can combine to solve a wide variety of problems.
series	other
last changed	2003/04/23 15:14

_id	8991
authors	Danahy, John and Hoinkes, Rodney
year	1995
title	Polytrim: Collaborative Setting for Environmental Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 647-658
summary	This paper begins with a review of the structuring values and questions the Centre for Landscape Research (CLR) is interested in answering with its testbed software system Polytrim (and its derivatives; CLRview, CLRpaint, CLRmosaic available via anonymous ftp over the internet). The mid section of the paper serves as a guide to Polytrim's structure and implementation issues. Some of the most enduring and significant principles learned from Polytrim's use over the last six years of use in research, teaching and professional practice are introduced. The paper will end with an overview of characteristics that we believe our next generation of software should achieve. The CLR's digital library on the World-Wide Web provides an extensive Set of illustrations and detailed descriptions of the ideas and figures presented in this paper. Endnotes provide specific internet addresses for those that wish to read, see or use the system.
keywords	Dialogue, Interaction, Collaboration, Integration, Setting
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	27b5
authors	Dießenbacher, Claus and Rank, Ernst
year	1995
title	A Multimedia Archaeological Museum
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 13-20
doi	https://doi.org/10.52842/conf.ecaade.1995.013
summary	This paper will present a project, which was first initiated in 1994 as a graduate students seminar and is now being continued as a research project in a cooperation of computer scientists, architects and archaeologists. An ancient roman city (Colonia Ulpia Traiana near todays Xanten in Germany) has been reconstructed, using various levels of abstraction. On the coarsest level, a 3D-model of the whole city was established, distinguishing between different historical periods of the city. The second level picks places of special interest (temples, the forum, the amphitheater, the townbaths etc.) and reconstructs these buildings or groups of buildings. On the finest level important interior parts or functional details like the Hypocaustae in the town-baths are modelled. All reconstructions are oriented as close as possible to results from excavations or other available documents. All levels of the 3D-model have been visualized using photorealistic images and sequences of video animations. The 3D model is integrated into a multimedia environment, augmenting the visualization elements with plans of the city and individual buildings and with text documents. It is intended, that parts of the outlined system will be available at the site of the ancient city, where today a large public archaeological park is located.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_2.htm
last changed	2022/06/07 07:55

_id	2036
authors	Dzeng, R.J.
year	1995
title	Caseplan: A Case-based Planer and Scheduler for Construction Using Product Modeling
source	University of Michigan
summary	Construction planning and scheduling are important to contractors for estimating the cost and duration of a project they are to bid on and construct. Many projects specify incentive and disincentive clauses for completing projects early and late. The timely completion and success of a project rely on good planning and scheduling. Contractors who repeatedly build the same kind of facilities acquire experience in scheduling the needed construction work. When parts of a facility's design are copied from one project to the next, the previously developed schedules could possibly be reused to schedule future work. This dissertation presents a construction planner and scheduler, named CasePlan, that automates the planning and scheduling process through the use of experience encoded in cases. CasePlan enables a contractor to specify a facility design using a product model, describe the relationships between product components and parts of a schedule (e.g., activity subnetworks, construction crews), and store this information as a case. As a decision support tool, CasePlan enables the contractor to search for cases whose facility designs are similar to that of a new project. The similarity assessment is based on the relative importance values that the contractor assigns to the components and their attributes in the product model. As an automation tool, CasePlan creates the schedule of a new project by reusing parts of the schedules whose associated designs are most similar to that project's design. The result is a schedule in which construction alternatives are chosen from those used in previous cases based on the new project scheduling constraints. The contractor / system-user can interact with CasePlan during its operation or modify the resulting schedule to add detail needed for executing the schedule in the field. Two types of construction projects have been studied for the development of CasePlan. One is the Kit-of-Parts post offices, in which designs are made by reusing design modules defined as Parts. The other is the boiler erection for fossil-fueled power plants, in which the design process is standardized and component configurations are similar across designs. These projects were chosen because their schedules are similar within each project type, which suggested that practitioners had a high incentive and were likely to reuse schedules. CasePlan's similarity assessment for boiler erection projects was validated using a survey. CasePlan's schedules and usability was subjectively evaluated also by the interviewed professionals.
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: