Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 350

Reformat results as: short short into frame detailed detailed into frame

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
doi	https://doi.org/10.52842/conf.ecaade.1995.139
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	6cb2
authors	Af Klercker, Jonas
year	1995
title	Architects Early Sketching on Computer Using Multimedia
doi	https://doi.org/10.52842/conf.ecaade.1995.247
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 247-256
summary	This paper presents a development work which aims at practical applications of ideas built on experiences in practise and education and the theoretical development in the BAS.CAAD project. The important difference between BAS.CAAD and CAD programs of today is the possibility to handle user organisation, building design and site in the same program. This means that design today has to be done in at least 3 separate programs with different ways of defining objects. It is then a computer technical problem to mix and study the relations between objects of separate origin. In a recent project our method to overcome this difficulty in CAAD computing was using a Multimedia program making visual simulations to analyse consequences of form etc. As the process went on and forms where more concrete it was possible to make simulations worth showing and discussing to involve colleagues, clients and users.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_51.htm
last changed	2022/06/07 07:54

_id	0c8e
authors	Ager, Mark Thomas and Sinclair, Brian R.
year	1995
title	StereoCAD: Three Dimensional Representation
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 343-355
summary	Concepts of stereoscopic vision have been around for more than two thousand years. Despite this long history, its application to the field to architecture and design seems relatively unexplored. Synthesis of two technologies, the stereoscope and the computer, was the focus of the present study. The goal of the research was to determine if computer-generated stereoscopic pairs hold value for architectural design. Using readily available computer technology (Apple Macintosh) the research team modelled and rendered an existing project to verify the degree of correlation between the physical construct, the computer 3D model and resultant correlation between the physical construct, the computer 3D model and resultant rendered stereo-paired representation. The experiments performed in this study have shown that producing stereo-paired images that highly correlate to reality is possible using technology that is readily available in the marketplace. Both the technology required to produce (i.e., personal computer and modelling/rendering software) and view (i.e., modified stereoscope) the images is unimposing. Both devices can easily fit in a studio or a boardroom and together can be utilized effectively to permit designers, clients and end-users to experience proposed spaces and projects. Furthermore, these technologies are familiar (clients and end-users have already experienced them in other applications and settings) and assume a fraction of the cost of more dynamic, immersive virtual reality systems. Working from this base, limitations of the process as well as future applications of computer-generated stereoscopic images are identified.
keywords	Stereovision, Representation, Computers, Architects, Design
series	CAAD Futures
last changed	2003/11/21 15:15

_id	8a8a
authors	Akin, Ö., Sen, R., Donia,M. and Zhang, Y.
year	1995
title	SEED-Pro: Computer-Assisted Architectural Programming in SEED
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 153-161
summary	Computer-assisted architectural programming is in its infancy. What there is in terms of architectural programming theory often differs from practice. In the first half of this paper we define relevant terms, provide abrief review of the state of the art, and draw attention to the primacy of architectural programming in design. SEED-Pro is introduced as an intelligent assistant providing structure to the normally open-endedactivities of design. This includes the creation of an architectural program from scratch. In the second, more technical, part of the paper we emphasize three specific topics. The design problem specificationfunctionality is described. The generation and evaluation of the emerging architectural program is discussed. An approach to the decomposition of the architectural program into alternative hierarchies is provided.The paper concludes with a discussion of what is and remains to be accomplished.
series	journal paper
email
last changed	2003/05/15 21:27

_id	c078
authors	Allegra, M, Fulantelli, G. and Mangiarotti, G.
year	1995
title	A New Methodology to Develop Hypermedia Systems for Architecture History
doi	https://doi.org/10.52842/conf.ecaade.1995.043
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 43-52
summary	This paper illustrates a research project concerning the analysis of architectural works through a comparative study based on hypermedia tools; by exploring the hypermedia, users can find the main subjects relative to the "method " of architectural planning. The use of multimedia in architecture allows the integration in a single system of different types of information which are necessary for the description of a work. texts, designs, photos and sounds. In addition, the hypertext information structure allows the direct intervention on analyzed projects, by pointing out the more important themes and their relationships. Users have the opportunity to immerse themselves in hypermedia and choose the subject to navigate through on each occasion. Our research project aims at developing a prototype concerning two architects. I.L.Kahn and F.L. Wright. The development methodology is based on the key role played by the components of architectonic works, thus allowing users to compare them in a simple and correct way. The methodology used in this work can be extended to other architects or periods, by simply changing the possibility of navigation, i.e. by changing the reading keys.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_6.htm
last changed	2022/06/07 07:54

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1995.003
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	8378
authors	Arlati, Ezio
year	1995
title	Patriarch: A Hypermedia Environment for the Support of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1995.187
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 187-198
summary	This paper reports on current research in the field of architectural design and knowledge- based systems, through the conception and implementation of two software tools operating as a part of an integrated hypermedia environment denominated PatriArch. Main concern of this set of tools operating in PatriArch is the support of design since the very beginning, in that phase of not yet correctly explored or interpretated constraints and of scarcely specified goals, in which an initial solution model - provisionally composed of fragments of supposed fitting ideas - for the design theme has to take place. The creative activity of the designer is assumed as an 'intentional planning activity' that represents the acquired level of knowledge of the network of connections defining the nature, function, shape in the space etc. of the increasingly integrated solution-model: the final design will be an evolution of this - and other competitive and concurrent - models. PatriArch is meant to be the environment containing and allowing the representation of this evolution through its ability of linking the fragments of designers' knowledge, supported by an integrated relational data base: Sysinfo. These works were conceived inside an educational software development program for architecture students.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_25.htm
last changed	2022/06/07 07:54

_id	623e
authors	Arumi-Noe, Francisco
year	1995
title	Algorithm For The Automatic Design Of A Shading Device
doi	https://doi.org/10.52842/conf.acadia.1995.233
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 233-242
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
keywords	Energy Conscious Design, Green Architecture, Sustainable Architecture, Solar Design, Computer Aided Design
series	ACADIA
last changed	2022/06/07 07:54

_id	b914
authors	Asanowicz, Aleksander and Asanowicz, Katarzyna
year	1995
title	Designing, CAD and CAD
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 181-192
summary	The general aim of our discussion is to analyze what has been changed in design process according to introducing the computers technology. For the better understanding of the design process evolution, we should precisely define start point - the traditional design process.Let's treat it as an iteration game between a designer and user. If we assume that the designing base is a reductive strategy, we can define six stages of it: 1.) To define a need; 2.) To formulate a task; 3.) To synthesize a design proposals; 4.) To analyze and optimize; 5.) To make a presentation. // The last stage - the presentation of designing proposals is the main factor of using computers in design process and creating definition of CAD as Computer Aided Drafting. According to this interpretation CAD has included four groups of activities: A.) Geometrical modelling; B.) Analysis; C.) Revision and estimation of design proposals; D.) Technical drawing preparing. // Unfortunately it has no connections with another meaning of CAD - Computer Aided Design because concerns every stage of design process except of creation of architectural form. On the other hand, computer enables us to improve the design process by permanent perception of designing forms and dynamic control over the transforming structure. Nowadays thanks to full-function sketching workstation and software like Fractal Design Painter a computer can be useful from the moment when the first line is drawing. It is possible, that the new generation of CAD software - CAD with Personality which connects computer models with picture transformation will enable CAD to be Computer Aided Design.
series	plCAD
email
last changed	2000/01/24 10:08

_id	2a49
authors	Asanowicz, Aleksander
year	1995
title	Multimedia Versus Ugliness of the City
doi	https://doi.org/10.52842/conf.ecaade.1995.389
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 389-394
summary	This paper presents a method of using multimedia techniques in order to solve problems of visual pollution of city environment. It is our observation that human - inducted degradation of city environmental results not only from neglect and vandalism but also from well - intentioned but inappropriate preservation actions by uninformed designers and local administrations. Very often, a local municipality administration permit to erect an ugly, bad-fitting surroundings houses. It is usually connected with lack of informations about certain areas of a city, its features, characteristic and about present and earlier buildings. Therefore there was an experiment - a complex programme aiding the decision process as a part of the CAMUS system (Computer Aided Management of Urban Structure) which is created at Faculty of Architecture TUB. One of the integral parts of it is a block, which has been called "How would it be like to be nice around". One of the basic elements of that system is a town data base consisting of the independent knowledge - based systems, working together in a distributed computing environment. City administration will have access to each information from multimedia data-base. Multimedia is also having and impact on the effectiveness of decision process in urban planning and in our fight with ugliness of the city.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_46.htm
last changed	2022/06/07 07:54

_id	e72e
authors	Asaro, N., Corrao, R., Faconti, D., Fiandaca, O., Grifoni, P. and Silvani, A.
year	1995
title	Riesce: An Hypertextual Tool for Browsing Information Produced in the Building Sector by PFEd
doi	https://doi.org/10.52842/conf.ecaade.1995.401
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 401-408
summary	The structure of a set of documents allow for navigation inside single texts. Yet it is often also an obstacle to comparability between different parts and concepts. Even document formatting is only a partial answer to the problem, since it fails to develop the matter of relationships between enunciation and results. It was need to retrieve information about the scientific findings made by Research Units (Operating Units) during the first three year period of the "Progetto Finalizzato Edilizia" (PFEd) for assessment and transfer purposes which led us to design and develop a system to facilitate the retrieval of the relevant information. We chose the building sector for this application because of its relative lack of previous experience of this type, the variety and complexity of documentation available and, last but not least, the general underestimation of research topics and results vis-à-vis the development of the sector. By making the suggestion and information inherent in its findings more available, in terms of method and ambit, as well as more explicit, the research has already achieved a significant result. In view of the prototype character of the experiment, the information will probably be adopted to produce an hypertext on the final results.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_48.htm
last changed	2022/06/07 07:54

_id	00ae
id	00ae
authors	Ataman, Osman
year	1995
title	Building A Computer Aid for Teaching Architectural Design Concepts
doi	https://doi.org/10.52842/conf.acadia.1995.187
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 187-208
summary	Building an aid for teaching architectural design concepts is the process of elaborating topics, defining problems and suggesting to the students strategies for solving those problems. I believe students in Environment and Behavior (E&B) courses at Georgia Tech can benefit greatly from a computer based educational tool designed to provide them with experiences they currently do not possess. In particular, little time in the course (outside lectures) is devoted to applying concepts taught in the course to the studio projects. The tool I am proposing provides students with an opportunity to critique architectural environments (both simple examples and previous projects) using a single concept, "affordances". This paper describes my current progress toward realizing the goal of designing a tool that will help the students to understand particular concepts and to integrate them into their designs. It is my claim that an integrative and interactive approach - creating a learning environment and making both the students and the environment mutually supportive- is fundamentally more powerful than traditional educational methods.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
doi	https://doi.org/10.52842/conf.acadia.2000.163
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	f8f0
authors	Bakhtari, Shirin and Oertel, Wolfgang
year	1995
title	DOM: An Active Assistance System for Architectural and Engineering Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 153-162
summary	This article delineates an active design assistance system for conceptual design, called DOM which is the abbreviation for Domain Ontology Modelling. The intention of our work is to endorse the role of modelling a common and shared platform of design knowledge as well as to address the crucial task of representing design decisions and engineering judgements in order to evaluate design layouts and to support layout construction from scratch.The prerequisites and assumptions for an appropriate role of an active design assistance system are explained. The presented paper contains both a conceptual and a technical exploration of the DOM system.
keywords	Design Ontology, Decision Making, Analysis, Synthesis
series	CAAD Futures
last changed	2003/11/21 15:16

_id	c3fa
authors	Barnanente, A., Cuscito, A.P. and Maiellaro, N.
year	1995
title	Expert System and Hypertext for Development Control
doi	https://doi.org/10.52842/conf.ecaade.1995.347
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 347-354
summary	The paper deals with an interactive system based on expert system and hypertext interaction in order to meet the demands of support for local government officials' activity in building-application inspection. Also described are the planning departments context and the problem related to eliciting knowledge in building-inspection process.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_42.htm
last changed	2022/06/07 07:54

_id	30d7
authors	Bartnicka, Malgorzata
year	1995
title	Childishly Honest Associate of the Trickery
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 209-219
summary	Perspective is a method of presentation of 3- dimensional space on the 2-dimensional surface. It can only approximately express the complexity of the authentic perception of reality. During the centuries canons of presentation varied in different epochs. It is quite possible that conventions of presentation considered today as exact expressions of reality may seem for the future generations as untrue as the ancient Egypt paintings seem for us. Our mind plays the major role in all kinds of presentation. During the whole life we learn to perceive the surrounding reality. We have formed also ability to ,see" the perspective. The linear perspective is not so easy in perception without factors of colour and light. These factors play a very important role in perception of the distance. The perception of perspective is not always unmistakable. Introduction of light and shadow is one of the measures to limit the ambiguity. Objects shown in perspective with appropriately chosen colouring and light-and-shade effects reveal impression of the distance inside the flat picture. Illusions of perspective are most astonishing when one can assume deep-rooted expectations and suppositions of the addressee. The computer monitor, like the picture, has only one plane on which our project can be presented. The major feature of architecture programs is both the possibility of creating various architecture spaces and the possibility to examine how (in our opinion) the created space would affect the addressee. By means of computer programs we are able to generate drawings and objects of two kinds: first - being the ideal projection of reality (at least in the same measure as the photograph), and the second - being the total negation of perspective rules. By means of CAD programs enabling 3-dimensional job we can check how all sorts of perspective tricks and artifices affect our imagination. The program cooperates with us trying to cheat the imperfect sense of sight. The trickeries can be of various type, starting from play of lights, through the elements changing the perception of perspective, and terminating with objects totally negating the rules of sound construction of solids. The knowledge contained in these programs is an encyclopaedic recapitulation of all sorts of achievements in the field of perspective and application of colour and light effects. All that remains to the users is to exploit this tremendous variety of capabilities.
series	plCAD
last changed	2000/01/24 10:08

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
doi	https://doi.org/10.52842/conf.ecaade.1995.355
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	c2bd
authors	Belblidia, Salim and Perrin, Jean-Pierre
year	1995
title	Multi-Resolution Rendering of Architectural Models
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 231-239
summary	This paper presents a method for representing complex models with various levels of detail. It is based on a geometric simplification algorithm and is applied to a scene described by a rooted-tree structure. In order to control the restuting image quality and the computation time, we propose two algorithms which allow to choose one representation of the scene.
keywords	Computer Graphics, Image Synthesis, Realistic Rendering, Real-Time Rendering, Computer Aided Architectural Design
series	CAAD Futures
email
last changed	2003/11/21 15:16

For more results click below: