Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 385

Reformat results as: short short into frame detailed detailed into frame

_id	858f
authors	Glanville, Ranulph
year	1995
title	Architecture and Computing: A medium approach
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 5-20
doi	https://doi.org/10.52842/conf.acadia.1995.005
summary	In this paper, the argument is presented that the way in which computers are used in Architectural Design is based on and limited by our imaginings. Typically, computing is used as a tool to automate a process formerly carried out by a human rather than to expand our range of options. It is held that this is a very restricted way of using the computer and that architects and designers would be better served treating the computer as a medium, allowing it to act as a partner in design. Only then will the radical possibilities of computing become apparent, so that we may benefit from true interaction with them. Some specific limitations in our uses of computers are highlighted and ways that allow the computer to be more of an interacting partner are indicated, as are ways of exploring computing to extend the possibilities.
series	ACADIA
last changed	2022/06/07 07:51

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	aab6
authors	Bermudez, Julio
year	1995
title	Designing Architectural Experiences: Using Computers to Construct Temporal 3D Narratives
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 139-149
doi	https://doi.org/10.52842/conf.acadia.1995.139
summary	Computers are launching us into a representational revolution that fundamentally challenges the way we have hitherto conceived and practiced architecture. This paper will explore one of its fronts: the simulation of architectural experiences. Today's off-the-shelf softwares (e.g. 3D modeling, animations, multimedia) allow us for first time in history to depict and thus approach architectural design and criticism truly experientially. What is so appealing about this is the possibility of shifting our attention from the object to the experience of the object and in so doing reconceptualizing architectural design as the design of architectural experiences. Carrying forward such a phenomenological proposition requires us to know (1) how to work with non-traditional and 'quasi-immersive' (or subject-centered) representational systems, and (2) how to construct temporal assemblages of experiential events that unfold not unlike 'architectural stories'. As our discipline lacks enough knowledge on this area, importing models from other fields appears as an appropriate starting point. In this sense, the narrative arts (especially those involved with the temporal representation of audio-visual narratives) offer us the best insights. For example, principles of cinema and storytelling give us an excellent guidance for designing architectural experiences that have a structuring theme (parti), a plot (order), unfolding episodes (rhythm), and special events (details). Approaching architecture as a temporal 3D narrative does transform the design process and, consequently, its results. For instance, (1) phenomenological issues enter the decision making process in an equal footing to functional, technological, or compositional considerations; (2) orthographic representations become secondary sources of information, mostly used for later accurate dimensioning or geometrization; (3) multi-sensory qualities beyond sight are seriously considered (particularly sound, texture, and kinesthetic); etc.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2068
authors	Frazer, John
year	1995
title	AN EVOLUTIONARY ARCHITECTURE
source	London: Architectural Association
summary	In "An Evolutionary Architecture", John Frazer presents an overview of his work for the past 30 years. Attempting to develop a theoretical basis for architecture using analogies with nature's processes of evolution and morphogenesis. Frazer's vision of the future of architecture is to construct organic buildings. Thermodynamically open systems which are more environmentally aware and sustainable physically, sociologically and economically. The range of topics which Frazer discusses is a good illustration of the breadth and depth of the evolutionary design problem. Environmental Modelling One of the first topics dealt with is the importance of environmental modelling within the design process. Frazer shows how environmental modelling is often misused or misinterpreted by architects with particular reference to solar modelling. From the discussion given it would seem that simplifications of the environmental models is the prime culprit resulting in misinterpretation and misuse. The simplifications are understandable given the amount of information needed for accurate modelling. By simplifying the model of the environmental conditions the architect is able to make informed judgments within reasonable amounts of time and effort. Unfortunately the simplications result in errors which compound and cause the resulting structures to fall short of their anticipated performance. Frazer obviously believes that the computer can be a great aid in the harnessing of environmental modelling data, providing that the same simplifying assumptions are not made and that better models and interfaces are possible. Physical Modelling Physical modelling has played an important role in Frazer's research. Leading to the construction of several novel machine readable interactive models, ranging from lego-like building blocks to beermat cellular automata and wall partitioning systems. Ultimately this line of research has led to the Universal Constructor and the Universal Interactor. The Universal Constructor The Universal Constructor features on the cover of the book. It consists of a base plug-board, called the "landscape", on top of which "smart" blocks, or cells, can be stacked vertically. The cells are individually identified and can communicate with neighbours above and below. Cells communicate with users through a bank of LEDs displaying the current state of the cell. The whole structure is machine readable and so can be interpreted by a computer. The computer can interpret the states of the cells as either colour or geometrical transformations allowing a wide range of possible interpretations. The user interacts with the computer display through direct manipulation of the cells. The computer can communicate and even direct the actions of the user through feedback with the cells to display various states. The direct manipulation of the cells encourages experimentation by the user and demonstrates basic concepts of the system. The Universal Interactor The Universal Interactor is a whole series of experimental projects investigating novel input and output devices. All of the devices speak a common binary language and so can communicate through a mediating central hub. The result is that input, from say a body-suit, can be used to drive the out of a sound system or vice versa. The Universal Interactor opens up many possibilities for expression when using a CAD system that may at first seem very strange.However, some of these feedback systems may prove superior in the hands of skilled technicians than more standard devices. Imagine how a musician might be able to devise structures by playing melodies which express the character. Of course the interpretation of input in this form poses a difficult problem which will take a great deal of research to achieve. The Universal Interactor has been used to provide environmental feedback to affect the development of evolving genetic codes. The feedback given by the Universal Interactor has been used to guide selection of individuals from a population. Adaptive Computing Frazer completes his introduction to the range of tools used in his research by giving a brief tour of adaptive computing techniques. Covering topics including cellular automata, genetic algorithms, classifier systems and artificial evolution. Cellular Automata As previously mentioned Frazer has done some work using cellular automata in both physical and simulated environments. Frazer discusses how surprisingly complex behaviour can result from the simple local rules executed by cellular automata. Cellular automata are also capable of computation, in fact able to perform any computation possible by a finite state machine. Note that this does not mean that cellular automata are capable of any general computation as this would require the construction of a Turing machine which is beyond the capabilities of a finite state machine. Genetic Algorithms Genetic algorithms were first presented by Holland and since have become a important tool for many researchers in various areas.Originally developed for problem-solving and optimization problems with clearly stated criteria and goals. Frazer fails to mention one of the most important differences between genetic algorithms and other adaptive problem-solving techniques, ie. neural networks. Genetic algorithms have the advantage that criteria can be clearly stated and controlled within the fitness function. The learning by example which neural networks rely upon does not afford this level of control over what is to be learned. Classifier Systems Holland went on to develop genetic algorithms into classifier systems. Classifier systems are more focussed upon the problem of learning appropriate responses to stimuli, than searching for solutions to problems. Classifier systems receive information from the environment and respond according to rules, or classifiers. Successful classifiers are rewarded, creating a reinforcement learning environment. Obviously, the mapping between classifier systems and the cybernetic view of organisms sensing, processing and responding to environmental stimuli is strong. It would seem that a central process similar to a classifier system would be appropriate at the core of an organic building. Learning appropriate responses to environmental conditions over time. Artificial Evolution Artificial evolution traces it's roots back to the Biomorph program which was described by Dawkins in his book "The Blind Watchmaker". Essentially, artificial evolution requires that a user supplements the standard fitness function in genetic algorithms to guide evolution. The user may provide selection pressures which are unquantifiable in a stated problem and thus provide a means for dealing ill-defined criteria. Frazer notes that solving problems with ill-defined criteria using artificial evolution seriously limits the scope of problems that can be tackled. The reliance upon user interaction in artificial evolution reduces the practical size of populations and the duration of evolutionary runs. Coding Schemes Frazer goes on to discuss the encoding of architectural designs and their subsequent evolution. Introducing two major systems, the Reptile system and the Universal State Space Modeller. Blueprint vs. Recipe Frazer points out the inadequacies of using standard "blueprint" design techniques in developing organic structures. Using a "recipe" to describe the process of constructing a building is presented as an alternative. Recipes for construction are discussed with reference to the analogous process description given by DNA to construct an organism. The Reptile System The Reptile System is an ingenious construction set capable of producing a wide range of structures using just two simple components. Frazer saw the advantages of this system for rule-based and evolutionary systems in the compactness of structure descriptions. Compactness was essential for the early computational work when computer memory and storage space was scarce. However, compact representations such as those described form very rugged fitness landscapes which are not well suited to evolutionary search techniques. Structures are created from an initial "seed" or minimal construction, for example a compact spherical structure. The seed is then manipulated using a series of processes or transformations, for example stretching, shearing or bending. The structure would grow according to the transformations applied to it. Obviously, the transformations could be a predetermined sequence of actions which would always yield the same final structure given the same initial seed. Alternatively, the series of transformations applied could be environmentally sensitive resulting in forms which were also sensitive to their location. The idea of taking a geometrical form as a seed and transforming it using a series of processes to create complex structures is similar in many ways to the early work of Latham creating large morphological charts. Latham went on to develop his ideas into the "Mutator" system which he used to create organic artworks. Generalising the Reptile System Frazer has proposed a generalised version of the Reptile System to tackle more realistic building problems. Generating the seed or minimal configuration from design requirements automatically. From this starting point (or set of starting points) solutions could be evolved using artificial evolution. Quantifiable and specific aspects of the design brief define the formal criteria which are used as a standard fitness function. Non-quantifiable criteria, including aesthetic judgments, are evaluated by the user. The proposed system would be able to learn successful strategies for satisfying both formal and user criteria. In doing so the system would become a personalised tool of the designer. A personal assistant which would be able to anticipate aesthetic judgements and other criteria by employing previously successful strategies. Ultimately, this is a similar concept to Negroponte's "Architecture Machine" which he proposed would be computer system so personalised so as to be almost unusable by other people. The Universal State Space Modeller The Universal State Space Modeller is the basis of Frazer's current work. It is a system which can be used to model any structure, hence the universal claim in it's title. The datastructure underlying the modeller is a state space of scaleless logical points, called motes. Motes are arranged in a close-packing sphere arrangement, which makes each one equidistant from it's twelve neighbours. Any point can be broken down into a self-similar tetrahedral structure of logical points. Giving the state space a fractal nature which allows modelling at many different levels at once. Each mote can be thought of as analogous to a cell in a biological organism. Every mote carries a copy of the architectural genetic code in the same way that each cell within a organism carries a copy of it's DNA. The genetic code of a mote is stored as a sequence of binary "morons" which are grouped together into spatial configurations which are interpreted as the state of the mote. The developmental process begins with a seed. The seed develops through cellular duplication according to the rules of the genetic code. In the beginning the seed develops mainly in response to the internal genetic code, but as the development progresses the environment plays a greater role. Cells communicate by passing messages to their immediate twelve neighbours. However, it can send messages directed at remote cells, without knowledge of it's spatial relationship. During the development cells take on specialised functions, including environmental sensors or producers of raw materials. The resulting system is process driven, without presupposing the existence of a construction set to use. The datastructure can be interpreted in many ways to derive various phenotypes. The resulting structure is a by-product of the cellular activity during development and in response to the environment. As such the resulting structures have much in common with living organisms which are also the emergent result or by-product of local cellular activity. Primordial Architectural Soups To conclude, Frazer presents some of the most recent work done, evolving fundamental structures using limited raw materials, an initial seed and massive feedback. Frazer proposes to go further and do away with the need for initial seed and start with a primordial soup of basic architectural concepts. The research is attempting to evolve the starting conditions and evolutionary processes without any preconditions. Is there enough time to evolve a complex system from the basic building blocks which Frazer proposes? The computational complexity of the task being embarked upon is not discussed. There is an implicit assumption that the "superb tactics" of natural selection are enough to cut through the complexity of the task. However, Kauffman has shown how self-organisation plays a major role in the early development of replicating systems which we may call alive. Natural selection requires a solid basis upon which it can act. Is the primordial soup which Frazer proposes of the correct constitution to support self-organisation? Kauffman suggests that one of the most important attributes of a primordial soup to be capable of self-organisation is the need for a complex network of catalysts and the controlling mechanisms to stop the reactions from going supracritical. Can such a network be provided of primitive architectural concepts? What does it mean to have a catalyst in this domain? Conclusion Frazer shows some interesting work both in the areas of evolutionary design and self-organising systems. It is obvious from his work that he sympathizes with the opinions put forward by Kauffman that the order found in living organisms comes from both external evolutionary pressure and internal self-organisation. His final remarks underly this by paraphrasing the words of Kauffman, that life is always to found on the edge of chaos. By the "edge of chaos" Kauffman is referring to the area within the ordered regime of a system close to the "phase transition" to chaotic behaviour. Unfortunately, Frazer does not demonstrate that the systems he has presented have the necessary qualities to derive useful order at the edge of chaos. He does not demonstrate, as Kauffman does repeatedly, that there exists a "phase transition" between ordered and chaotic regimes of his systems. He also does not make any studies of the relationship of useful forms generated by his work to phase transition regions of his systems should they exist. If we are to find an organic architecture, in more than name alone, it is surely to reside close to the phase transition of the construction system of which is it built. Only there, if we are to believe Kauffman, are we to find useful order together with environmentally sensitive and thermodynamically open systems which can approach the utility of living organisms.
series	other
type	normal paper
last changed	2004/05/22 14:12

_id	8c8d
authors	Li, Andrew I Kang and Tsou, Jin Yeu
year	1996
title	Using Virtual Models to Teach Traditional Chinese Wood Construction
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 119-130
doi	https://doi.org/10.52842/conf.caadria.1996.119
summary	In this paper we discuss our experience in using virtual models to teach traditional Chinese wood construction. Although our approach is technically simple – we use a kit of model parts made with the Solid Modeler of AutoCAD, Release 12 (now Release 13), and customized commands in AutoLISP – we have had excellent results. This is because of the remarkable match between the modelling medium and the highly systematized nature of traditional Chinese wood construction. It is this crucial – and interesting – characteristic that we want students to understand and appreciate. In our first teaching experience, in the fall term, 1994-95, despite unexpected drawbacks, our approach succeeded. In fact, our students, all Hong Kong Chinese, were surprisingly enthusiastic and even took pride in the sophistication of this uniquely Chinese construction system. In 1995-96, we have used the same kit of parts in two courses: an introduction to Chinese architecture (spring term) and an advanced course in Song dynasty wood construction (fall term). We first discuss briefly the theoretical basis for our approach. We then describe the assignments, the kit of parts, and supporting materials used in our teaching experiences. Finally, we discuss our findings and consider directions for the future development and improvement of our approach.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2006_paper2
id	ascaad2006_paper2
authors	Sharji, Elyna and Ahmed Rafi
year	2006
title	The Significant Role of an Electronic Gallery to the Education Experience and Learning Environment
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Multimedia has brought new paradigms to education where users are able to use the technology to create compelling content that truly represents a new archetype in media experience. According to Burger (1995), the synergy of digital media is becoming a way of life where new paradigms for interactive audio-visual experiences of all communicative arts to date are mandatory. It potentially mixes technology and disciplines of architecture and art. Students can learn on their own pace and they can be tested in a non-linear way while interactivity allows the curious to easily explore related topics and concepts. Fundamental assumptions, theories and practices of conventional design paradigm are constantly being challenged by digital technology and this is the current scenario in architecture and art and design schools globally. Thus schools are enhancing the methods and improvising the technology of imparting knowledge to be in consistent with recent findings and knowledge. To be able to cater the use of digital media and information technology on architectural and art design education, four criteria are required, which are; the SPACE and place to accommodate the educational activities, the TOOLS that assist imparting of knowledge, the CONTENT of syllabus and information and the acceptance and culture of the receiving end users and HUMAN PERCEPTION. There is a need for the research of realization and activating the architectural space that has been equipped with multimedia tools and upgraded with recent technology to facilitate and support the community of learners and users. Spaces are now more interactive, multi functional, flexible and intelligent to suit the trend of computing in normal everyday life of the education sector, business and management, art and leisure, corporate and technological area. While the new concept of computing in education is still in the earlier phase, the conventional analogue paradigm still dominates the architectural design discourse which acts as a barrier to the development of digital designs and architectural education. A suitable approach is in need to bridge the gap between what theory has been explored and the practice of knowledge. A digital support environment with intelligent design and planning tools is envisioned to bridge the gap and to cater for the current scenario.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:34

_id	2005_787
id	2005_787
authors	Veikos, Cathrine
year	2005
title	The Post-Medium Condition
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 787-794
doi	https://doi.org/10.52842/conf.ecaade.2005.787
summary	Theorists in art, architecture and visual media have described the digital world as a world of mediumlessness and proclaimed that the medium of a work, once the ontological determinant for the classification of the arts, is rendered meaningless by recent technological and cultural developments (Krauss, 2000; Negroponte, 1995; Manovich, 2001). Although indebted to specific media-based techniques and their attendant ideologies, software removes the material reality of techniques to an immaterial condition where the effects of material operations are reproduced abstractly. This paper asserts that a productive approach for digital design can be found in the acknowledgement that the importance of the digital format is not that it de-materializes media, but that it allows for the maximum intermingling of media. A re-conceptualization of media follows from this, defined now as, a set of conventions derived from the material conditions of a given technical support, conventions out of which to develop a form of expressiveness that can be both projective and mnemonic (Krauss, 2000). The paper will focus on the identification of these conventions towards the development of new forms of expressiveness in architecture. Further demonstration of the intermingling of materially-based conventions is carried out in the paper through a comparative analysis of contemporary works of art and architecture, taking installation art as a particular example. A new design approach based on the maximum intermingling of media takes account of integrative strategies towards the digital and the material and sees them as inextricably linked. In the digital “medium” different sets of conventions derived from different material conditions transfer their informational assets producing fully formed, material-digital ingenuity.
keywords	Expanded Architecture, Art Practice, Material, Information, ParametricTechniques, Evolutionary Logics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	623e
authors	Arumi-Noe, Francisco
year	1995
title	Algorithm For The Automatic Design Of A Shading Device
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 233-242
doi	https://doi.org/10.52842/conf.acadia.1995.233
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
keywords	Energy Conscious Design, Green Architecture, Sustainable Architecture, Solar Design, Computer Aided Design
series	ACADIA
last changed	2022/06/07 07:54

_id	2a49
authors	Asanowicz, Aleksander
year	1995
title	Multimedia Versus Ugliness of the City
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 389-394
doi	https://doi.org/10.52842/conf.ecaade.1995.389
summary	This paper presents a method of using multimedia techniques in order to solve problems of visual pollution of city environment. It is our observation that human - inducted degradation of city environmental results not only from neglect and vandalism but also from well - intentioned but inappropriate preservation actions by uninformed designers and local administrations. Very often, a local municipality administration permit to erect an ugly, bad-fitting surroundings houses. It is usually connected with lack of informations about certain areas of a city, its features, characteristic and about present and earlier buildings. Therefore there was an experiment - a complex programme aiding the decision process as a part of the CAMUS system (Computer Aided Management of Urban Structure) which is created at Faculty of Architecture TUB. One of the integral parts of it is a block, which has been called "How would it be like to be nice around". One of the basic elements of that system is a town data base consisting of the independent knowledge - based systems, working together in a distributed computing environment. City administration will have access to each information from multimedia data-base. Multimedia is also having and impact on the effectiveness of decision process in urban planning and in our fight with ugliness of the city.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_46.htm
last changed	2022/06/07 07:54

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
doi	https://doi.org/10.52842/conf.acadia.2000.163
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	e100
authors	Bermudez, Julio and King, Kevin
year	1995
title	Architecture in Digital Space: Actual and Potential Markets
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 405-423
doi	https://doi.org/10.52842/conf.acadia.1995.405
summary	As both the skepticism and 'hype' surrounding electronic environments vanish under the weight of ever increasing power, knowledge, and use of information technologies, the architectural profession must prepare for significant expansion of its professional services. To address the issue, this paper offers a survey of the professional services architects and designers do and may provide in digital space, and who the potential clients are. The survey was conducted by interviews with software developers, gaming companies, programmers, investigators, practicing architects, faculty, etc. It also included reviews of actual software products and literary research of conference proceedings, journals, books and newspapers (i.e. articles, classified ads, etc.). The actual and potential markets include gaming and entertainment developments, art installations, educational applications, and research. These markets provide architects the opportunity to participate in the design of 3D gaming environments, educational software, architecture for public experience and entertainment, data representation, cyberspace and virtual reality studies, and other digital services which will be required for this new world. We will demonstrate that although the rapidly growing digital market may be seen by some to be non-architectural and thus irrelevant to our profession, it actually represents great opportunities for growth and development. Digital environments will not replace the built environment as a major architectural market, but they will significantly complement it, thus strengthening the entire architectural profession.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	44f6
authors	Colajanni, Benedetto and Pellitteri, Giuseppe (Eds.)
year	1995
title	Multimedia and Architectural Disciplines [Conference Proceedings]
source	Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4 / Palermo (Italy) 16-18 November 1995, 436 p.
doi	https://doi.org/10.52842/conf.ecaade.1995
summary	The rapid development of the potentialities of multimedia imposes a reflection about its use in teaching architecture. Multimedia is multifaceted and each facet deserves a particular attention inasmuch as it can change the traditional approach to learning. A direct experience of an architectural work can be simulated with a impact far stronger than an experience trough photographs, drawings and books can do. But, as every positive fact can have in certain cases also some negative consequences. the intensity of the participation to an experience structured by someone else can leave less space to a personal approach to the object of the presentation. The same problem is posed if we consider the structure of an hypertext. The essence of the hypertext lies in the net of relationships between very different kinds of documents that it is able to manage in order to express the complexity of its theme. But who has to create the net, the teacher choosing the relationship that he thinks important or the learner to build a personal image of the hypertext matter. It is an old question about the two faces of teaching: transmitting knowledge or giving the learner the instruments to build by oneself his store of knowledge. Easy and trivial answer that both approaches can be useful. The accomplishment of a multimedial sequence of average complexity requires at present a lot of time. Hence, to be convenient, it is to be used many times, then by many students. The effectiveness of the tool partly depends on the rapidity with which it can be constructed. Speeding it up would allow to use this kind of tools with the same easiness than mare traditional means of representation. Besides those general considerations a check is to do on the peculiarities, if any, of the use of multimedia in the different disciplines of the formative curriculum of an architect. This is theme of our thirteenth conference. The programme has been articulated into sessions, dealing separately with history teaching, design teaching and research. Of course the sessions dealing with design are more numerous than the other, since design is the axis of teaching architecture. The presented paper cover a large arc of arguments, dealing with many facets of the proposed themes with plenty of examples and documentation on practical experiences. constituting a corpus of great usefulness for any operator in the field of architectural teaching.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Home.htm
last changed	2022/06/07 07:49

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
doi	https://doi.org/10.52842/conf.ecaade.1996.121
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	4538
authors	Dobson, A., Dokonal, W. and Kosco, I.
year	1995
title	World Wide Web Presentation of Collaborative Student Design Work
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 105-110
doi	https://doi.org/10.52842/conf.ecaade.1995.105
summary	Inspired by presentations made at the last eCAADe conference of collaborative work by students at a number of schools of architecture who were using the Internet as a form of virtual studio, a network for a collaborative design project was set up between the schools of architecture in Bratislava, Graz and Luton. This paper takes the form of a multi-media presentation of the results of this collaborative project, carried out on-line via the World Wide Web site at the University of Technology in Graz. In addition to presenting the design solutions produced during the project, the paper analyses the technical difficulties encountered with file transfers, assesses the participants' experience of using the Internet as a medium for collaboration, evaluates the educational validity of the project and outlines proposals for the future development of collaborative activities by the group.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	819d
authors	Eiteljorg, H.
year	1988
title	Computing Assisted Drafting and Design: new technologies for old problems
source	Center for the study of architecture, Bryn Mawr, Pennsylvania
summary	In past issues of the Newsletter, George Tressel and I have written about virtual reality and renderings. We have each discussed particular problems with the technology, and both of us mentioned how compelling computer visualizations can be. In my article ("Virtual Reality and Rendering," February, 1995, Vol. 7, no. 4), I indicated my concerns about the quality of the scholarship and the level of detail used in making renderings or virtual worlds. Mr. Tressel (in "Visualizing the Ancient World," November, 1996, Vol. IX, no. 3) wrote about the need to distinguish between real and hypothetical parts of a visualization, the need to differentiate materials, and the difficulties involved in creating the visualizations (some of which were included in the Newsletter in black-and-white and on the Web in color). I am returning to this topic now, in part because the quality of the images available to us is improving so fast and in part because it seems now that neither Mr. Tressel nor I treated all the issues raised by the use of high-quality visualizations. The quality may be illustrated by new images of the older propylon that were created by Mr. Tressel (Figs. 1 - 3); these images are significantly more realistic than the earlier ones, but they do not represent the ultimate in quality, since they were created on a personal computer.
series	other
last changed	2003/04/23 15:50

_id	600e
authors	Gavin, Lesley
year	1999
title	Architecture of the Virtual Place
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 418-423
doi	https://doi.org/10.52842/conf.ecaade.1999.418
summary	The Bartlett School of Graduate Studies, University College London (UCL), set up the first MSc in Virtual Environments in the UK in 1995. The course aims to synthesise and build on research work undertaken in the arts, architecture, computing and biological sciences in exploring the realms of the creation of digital and virtual immersive spaces. The MSc is concerned primarily with equipping students from design backgrounds with the skills, techniques and theories necessary in the production of virtual environments. The course examines both virtual worlds as prototypes for real urban or built form and, over the last few years, has also developed an increasing interest in the the practice of architecture in purely virtual contexts. The MSc course is embedded in the UK government sponsored Virtual Reality Centre for the Built Environment which is hosted by the Bartlett School of Architecture. This centre involves the UCL departments of architecture, computer science and geography and includes industrial partners from a number of areas concerned with the built environment including architectural practice, surveying and estate management as well as some software companies and the telecoms industry. The first cohort of students graduated in 1997 and predominantly found work in companies working in the new market area of digital media. This paper aims to outline the nature of the course as it stands, examines the new and ever increasing market for designers within digital media and proposes possible future directions for the course.
keywords	Virtual Reality, Immersive Spaces, Digital Media, Education
series	eCAADe
email
more	http://www.bartlett.ucl.ac.uk/ve/
last changed	2022/06/07 07:51

_id	890b
authors	Jakimowicz, Adam
year	1995
title	Architecture not Aided – Architecture Transformed
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 193-207
summary	Permeating of new technologies (computer aided design) into architectural design causes essential changes in its structure. It is the process, set of mutually interrelated different social, political, cultural occurrences, which happen in the present time. Everything what is new, brings either fear or unreliable expectations. The reflection is needed to name what we will have to deal with in architecture. Architecture is not a stable sphere, and as other disciplines is subject to processes of change, which result from the specificity of the time. We need to be aware of the consequences these processes could cause. I located them in six general fields: 1.) Transformation of the tool traditional tools - set of singular, autonomous, mono-functional devices, which together make the environment; computer - one tool consisting of non-autonomous internal and external units, multifunctional; itself it is the environment, system; 2.) Transformation of the medium. As the medium is the message (M.McLuhan), so the essence of media is transmission. Traditional transmission in architectural design is direct (transmission is equivalent to recording, notation), computer based transmission is indirect (transmission is not equivalent to recording); 3.) Transformation of perception, imagination and thinking. Perception - in the process of design directly relates to media Indirect transmission - causes also rupture in direct relation between record and perception (mainly in modelling); simulated object is a stage in the process. Imagination, thinking - influenced with perception, with data transmitted from the medium - can be seen as inspiration; 4.) Transformation of cooperation and communication. It is to be done by elimination of some of intermediate stages in the design process and use of multimedial communication systems (Internet); 5.) Transformation of methodology. Same as in 4 with the possibility of simultaneous shifting in the hierarchy of design stages - almost full reversal of the process possible (regardless of individual methodology) - if needed of course; 6. Transformation of architecture itself. This concerns very deeply point 3 - and it rooms that natural consequences of the changes in perception, imagination and thinking should result in the new understanding of architecture - not as electronic methaphone, but as a sphere relevant (?!) to the vision of the world, which, as we see, is dramatically changing. The basic issue to accept is that this vision of the world should be interpreted individually. Personally.
series	plCAD
email
last changed	2000/01/24 10:08

_id	8dfc
authors	Jakimowicz, Adam and Kadysz, Andrzej
year	1995
title	Architecture of Many Media (Architecture is Many Media)
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 395-400
doi	https://doi.org/10.52842/conf.ecaade.1995.395
summary	Basis issues concerning media need redefining, because new media should not be perceived and approached according to traditional conventions. Present understanding of a medium as a mean of linear transmission, with the primary role of sender is no more sufficient, is too simple. The possibility of mutual and multidirectional communication in the real time makes the distinction between sender and receiver not so clear. The roles are effacing, but actions, processes are not. When receiver becomes sender, the process of receiving is always distinct from sending. The importance of the process, the attention must move towards a temporal process of transmitting of the receiving. When the process changes, the message (even when ´only´ its form) changes, receiving changes because it is an active action. This paper is the collection of ideas for discussion.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_47.htm
last changed	2022/06/07 07:52

_id	ca47
authors	Lee, Shu Wan
year	1996
title	A Cognitive Approach to Architectural Style Several Characteristics of Design Thinking in Architecture
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 223-226
doi	https://doi.org/10.52842/conf.caadria.1996.223
summary	Designing is a complicated human behaviour and method, and is often treated as a mysterious "black box” operation in human mind. In the early period as for theory-studying of design thinking, the way of thinking that the researchers took were mostly descriptive discussions. Therefore, they lacked direct and empirical evidence although those studies provided significant exploration of design thinking (Wang, 1995). In recent years as for the study of cognitive science, they have tried to make design "glass box”. That is to try to make the thinking processes embedded in designers publicized. That is also to externalize the design procedure which provided the design studies another theoretical basis of more accurate and deeply researched procedure (Jones, 1992). Hence the studying of design thinking has become more important and the method of designing has also progressed a lot. For example, the classification of the nature of design problem such as ill-defined and well-defined (Newell, Shaw, and Simon, 1967), and different theoretical procedure modes for different disciplines, such as viewing architectural models as conjecture-analysis models and viewing engineering models as analysis-synthesis (Cross, 1991).
series	CAADRIA
last changed	2022/06/07 07:52

For more results click below: