CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 393

_id b04c
authors Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year 1996
title Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series other
last changed 2003/04/23 15:50

_id ddssar0206
id ddssar0206
authors Bax, M.F.Th. and Trum, H.M.G.J.
year 2002
title Faculties of Architecture
source Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series DDSS
last changed 2003/11/21 15:16

_id c7ef
authors Huang, Jeffrey
year 1995
title Dynamic Urban Information Model: Integrated Approach to Strategic Urban Redevelopment
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 399-408
summary This paper describes a prototype Dynamic Urban Information Model (DUIM) designed to facilitate strategic urban redevelopment, that is, the process of determining precise architectural interventions to set off, guide and condition redevelopment activities. The idea of the DUIM is based on the notion that in order to attain effective strategic redevelopment, an integrated approach addressing the complex interactions of the factors involved in urban life and growth is required. Accordingly, an urban model for this purpose must include not only spatial and formal considerations, but also social, political, economical and ecological aspects. Through a case-study involving the redevelopment of a post-industrial site, this paper explains the rationale of the DUIM in terms of its formal structure, its database, and its application.
keywords Geographic Information Systems, Urban Design, Integrated Environments, Simulation, Real-Time Animation
series CAAD Futures
last changed 1999/08/03 17:16

_id 4a1a
authors Laird, J.E.
year 2001
title Using Computer Game to Develop Advanced AI
source Computer, 34 (7), July pp. 70-75
summary Although computer and video games have existed for fewer than 40 years, they are already serious business. Entertainment software, the entertainment industry's fastest growing segment, currently generates sales surpassing the film industry's gross revenues. Computer games have significantly affected personal computer sales, providing the initial application for CD-ROMs, driving advancements in graphics technology, and motivating the purchase of ever faster machines. Next-generation computer game consoles are extending this trend, with Sony and Toshiba spending $2 billion to develop the Playstation 2 and Microsoft planning to spend more than $500 million just to market its Xbox console [1]. These investments have paid off. In the past five years, the quality and complexity of computer games have advanced significantly. Computer graphics have shown the most noticeable improvement, with the number of polygons rendered in a scene increasing almost exponentially each year, significantly enhancing the games' realism. For example, the original Playstation, released in 1995, renders 300,000 polygons per second, while Sega's Dreamcast, released in 1999, renders 3 million polygons per second. The Playstation 2 sets the current standard, rendering 66 million polygons per second, while projections indicate the Xbox will render more than lOO million polygons per second. Thus, the images on today's $300 game consoles rival or surpass those available on the previous decade's $50,000 computers. The impact of these improvements is evident in the complexity and realism of the environments underlying today's games, from detailed indoor rooms and corridors to vast outdoor landscapes. These games populate the environments with both human and computer controlled characters, making them a rich laboratory for artificial intelligence research into developing intelligent and social autonomous agents. Indeed, computer games offer a fitting subject for serious academic study, undergraduate education, and graduate student and faculty research. Creating and efficiently rendering these environments touches on every topic in a computer science curriculum. The "Teaching Game Design " sidebar describes the benefits and challenges of developing computer game design courses, an increasingly popular field of study
series journal paper
last changed 2003/04/23 15:50

_id 1bb0
authors Russell, S. and Norvig, P.
year 1995
title Artificial Intelligence: A Modern Approach
source Prentice Hall, Englewood Cliffs, NJ
summary Humankind has given itself the scientific name homo sapiens--man the wise--because our mental capacities are so important to our everyday lives and our sense of self. The field of artificial intelligence, or AI, attempts to understand intelligent entities. Thus, one reason to study it is to learn more about ourselves. But unlike philosophy and psychology, which are also concerned with AI strives to build intelligent entities as well as understand them. Another reason to study AI is that these constructed intelligent entities are interesting and useful in their own right. AI has produced many significant and impressive products even at this early stage in its development. Although no one can predict the future in detail, it is clear that computers with human-level intelligence (or better) would have a huge impact on our everyday lives and on the future course of civilization. AI addresses one of the ultimate puzzles. How is it possible for a slow, tiny brain{brain}, whether biological or electronic, to perceive, understand, predict, and manipulate a world far larger and more complicated than itself? How do we go about making something with those properties? These are hard questions, but unlike the search for faster-than-light travel or an antigravity device, the researcher in AI has solid evidence that the quest is possible. All the researcher has to do is look in the mirror to see an example of an intelligent system. AI is one of the newest disciplines. It was formally initiated in 1956, when the name was coined, although at that point work had been under way for about five years. Along with modern genetics, it is regularly cited as the ``field I would most like to be in'' by scientists in other disciplines. A student in physics might reasonably feel that all the good ideas have already been taken by Galileo, Newton, Einstein, and the rest, and that it takes many years of study before one can contribute new ideas. AI, on the other hand, still has openings for a full-time Einstein. The study of intelligence is also one of the oldest disciplines. For over 2000 years, philosophers have tried to understand how seeing, learning, remembering, and reasoning could, or should, be done. The advent of usable computers in the early 1950s turned the learned but armchair speculation concerning these mental faculties into a real experimental and theoretical discipline. Many felt that the new ``Electronic Super-Brains'' had unlimited potential for intelligence. ``Faster Than Einstein'' was a typical headline. But as well as providing a vehicle for creating artificially intelligent entities, the computer provides a tool for testing theories of intelligence, and many theories failed to withstand the test--a case of ``out of the armchair, into the fire.'' AI has turned out to be more difficult than many at first imagined, and modern ideas are much richer, more subtle, and more interesting as a result. AI currently encompasses a huge variety of subfields, from general-purpose areas such as perception and logical reasoning, to specific tasks such as playing chess, proving mathematical theorems, writing poetry{poetry}, and diagnosing diseases. Often, scientists in other fields move gradually into artificial intelligence, where they find the tools and vocabulary to systematize and automate the intellectual tasks on which they have been working all their lives. Similarly, workers in AI can choose to apply their methods to any area of human intellectual endeavor. In this sense, it is truly a universal field.
series other
last changed 2003/04/23 15:14

_id maver_090
id maver_090
authors Harrison C., Grant, M., Granat, M., Maver, T. and Conway, B.
year 2000
title Development of a Wheelchair Virtual
source 3rd International Conference on Disability, VR and Associated Technologies, Sardinia, (Ed. P Sharkey) ICDVRAT2000, 1-8
summary In the UK the Disability Discrimination Act 1995 aims to end discrimination against disabled people. Importantly the Act gives the disabled community new employment and access rights. Central to these rights will be an obligation for employers and organisations to provide premises which do not disadvantage disabled people. Many disabled people rely on wheelchairs for mobility. However, many buildings do not provide conditions suited to wheelchair users. This project aims to provide instrumentation allowing wheelchair navigation within virtual buildings. The provision of such instrumentation assists architects in identifying the needs of wheelchair users at the design stage. Central to this project is the need to provide a platform which can accommodate a range of wheelchair types, that will map intended wheelchair motion into a virtual world and that has the capacity to provide feedback to the user reflecting changes in floor surface characteristics and slope. The project represents a collaborative effort between architects, bioengineers and user groups and will be comprised of stages related to platform design, construction, interfacing, testing and user evaluation.
series other
email
last changed 2003/09/03 15:01

_id 4688
authors Woodbury, Robert and Chang, Teng-Wen
year 1995
title Building Enclosures using SEED-Config
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 49-54
summary We describe enclosure design for SEED-Config using an example from "Architectural Details for Insulated Buildings" (Brand 90). We develop enclosures for insulated buildings in terms of the functional units that specify them, the technologies that implement them and the design units that describe them. Brand gives details in eight series (A-H); in each series he describes a specific detailing system. We base our exposition on series A to E: these share the property of the wall fitting partially under the roof and floor slabs. In series F and G the wall stands clear of the slabs and this would require a different approach to detailing from a very high level. Series H is a compendium of special cases that we do not discuss here at all. We conclude with a discussion of what our enclosure design example implies for the representation and computational engine of SEED-Config. We chose insulated enclosures as our example for a specific reason: Brandís treatment of them is proximate to the fundamental approach we take in SEED. Brand wrote in clear, rule-like terms that progress from the abstract to the specific. He explicitly links each part of every detail to the function it fulfills.
keywords Generative Systems, Building Enclosures, CAD, SEED, Representation, Search
series CAAD Futures
email
last changed 2003/05/16 20:58

_id 41e5
authors Abendroth, M., Decock, J. and Mestaoui, N.
year 2000
title O_1:// the hypertextu(r)al matrix
source SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series SIGRADI
email
last changed 2016/03/10 09:47

_id 0bbb
authors Alshawi, Mustafa
year 1995
title Dynamic Generation of Design Plans at the Brief Stage
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series CAAD Futures
email
last changed 2003/11/21 15:15

_id a927
authors Amirante, Isabella and Bosco, Antonio
year 1995
title Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi https://doi.org/10.52842/conf.ecaade.1995.003
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed 2022/06/07 07:54

_id d79e
authors Boerner, Katy
year 1995
title Interactive, Adaptive, Computer-aided Design
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 627-634
summary A general framework of a system that supports building engineering is presented. It accounts for a set of desirable features. Among them are (1) graphical man-machine interaction, (2) high interactivity to facilitate the acquisition of the huge amount of knowledge necessary to support design, (3) incremental knowledge acquisition as the basis for incrementally increasing system support, and (4) adaptability to the tasks which are tackled, the distinctive features of the domain, and user preferences. This paper provides the underlying assumptions and basic approaches of the modules constituting this framework and sketches the current implementation.
keywords Graphical Interfaces, Incremental Knowledge Acquisition, Knowledge Organization, Case-Based Reasoning, Design Prototypes, Analogical Reasoning
series CAAD Futures
email
last changed 2003/11/21 15:16

_id c6bb
authors Bottelli, Valeria and Fogh, Christian
year 1995
title Galathea: A Case-Based Planning Tool for Knowledge Navigation in the Architectural Design Process
doi https://doi.org/10.52842/conf.ecaade.1995.427
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 427-436
summary We report on an on-going Ph.D. research aimed at the analysis of the nature of process knowledge in architectural design and the development of a conceptual model for a case-based navigation tool for its support. We describe architectural design from a process viewpoint and assume it as a form of intentional planning, leading from an initial state configuration toward a desired situation, by means of an incremental specification of goals, constraints and involved variables. We consider the very essence of design and of the specific professional skill characterising designers as the continual recursive transformation of the initial solution model, in order to map the desired state onto the enacted one and the capability to govern a number of continually changing variables in this direction. On the basis of this general concept of the design process, we describe the model of Galathea, a case-based planning tool, aimed at progressively representing the enlarging space of acquired knowledge, and at supporting the designer´s central role in the management of the design process.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_50.htm
last changed 2022/06/07 07:54

_id 276c
authors Breen, Jack
year 1995
title Dynamic Perspective: The Media Research Programme
source The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary This paper focuses on the Research Programme of the Media Sector at the Faculty of Architecture, Delft University of Technology. The media research objectives for the coming years have been brought together with an overall project: “Dynamic Perspective”. The “dynamic” quality may be interpreted both as movement (visual displacement and registration) and as change (the effects of different options).

The four projects which together make up this research programme deal with perception (understanding) and conception (designing and imaging) of urban space: “the architecture of the city”. Specific aspects are the effects of primary and secondary spatial boundaries and the systematic structuring of simulation of visual information. The programme will further concentrate on the development and implementation of relevant techniques (besides “traditional” ones such as the drawing and the architectural model, on multimedia techniques such as endoscopy, computer visualization and development of virtual reality systems), both in education and in design practice.

By means of analysis, the creation of visual models of choice and the setting up of experiments, the programme aims at the furthering of theoretical knowledge and at acquiring better insights into the effects of design decisions at an urban level, both for designers and for other participants in the design process. Further development of existing laboratory facilities towards a comprehensive Design Simulation Laboratory is an important aspect of the programme.

Within the media research process the Aspern location master plan has been considered as a case study, the findings of which will be presented separately in the workshop sessions.

keywords Architectural Endoscopy, Real Environments
series EAEA
email
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id e420
authors Colajanni, B., Pellitteri, G. and Giacchino, V.
year 1995
title An Hypertext in Building Rehabilitation: A Case Study in Palermo
doi https://doi.org/10.52842/conf.ecaade.1995.029
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 29-36
summary Hypertext is an ideal tool to teach building design inasmuch as it allows both teacher driven and student self driven learning. It allows to link every type of informations (texts, sounds, images, films) with associative mechanisms much like those utilized by our brain. Hypertextes buikt up for teaching purposen can be usefully employed in professional occurrencies. An example is shown dealing with the rehabilitation of the Fiumetorto Palace in the historical centre of Palermo. It manages in a simple but efficient way the many complex interconnections between analysis of the state of decay, history, town planning rules and technology focusing all the information on the rehabilitation task.
series eCAADe
email
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_4.htm
last changed 2022/06/07 07:56

_id 1586
authors Counsell, John A M
year 1995
title GIS Software and Coordinated Project Information Systems - A Mechanism for Increasing the Effectiveness of 3D CAAD Models
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 389-397
summary This paper reviews current 3D CAD building modelling by reference to a large ongoing case study, in which 3D building models and sites are used to generate coordinated drawing, schedule, and visualisation output. It focuses on barriers which current software interpose, preventing more complete use of 3D CAD to integrate building project information systems. Comparisons are made with tools and methodology developed in GIS, in which users make different selections as required from common databases, and it is argued that used in conjunction with 3D CAD building models, they could improve functionality and reduce barriers to effective deployment.
keywords Building Model, Coordinated Information Systems
series CAAD Futures
email
last changed 2003/05/16 20:58

_id 8cdd
authors Coyne, Richard
year 1995
title Multimedia Metaphors in the Design Studio
doi https://doi.org/10.52842/conf.ecaade.1995.129
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 129-138
summary In this paper I examine some of he ways that multimedia impacts upon the design studio. I show how multimedia affects design products and processes in so far as it is caught up in the metaphors we use in structuring design tasks. But this influence is far from deterministic. Metaphors entail various oppositions, the resolution of which sets the problems for the designer in the particular design situation. The article describes two cases of using multimedia in a design studio teaching situation. The first explores how multimedia brings to light the opposition between the design and the presentation of the design. I explore how students cope with the tensions that arise when using multimedia. The second case study looks at the conventional privileging of the visual over the other senses in architectural design. I describe a design studio in which we deliberately privileged the audile sense over the visual. This was established through the way we set the brief, hut also through the use of multimedia technology. Students used sound recorded from the site in conjunction with MIDI keyboard and sound processing technology to analyse and synthesise sound pertinent to the design of a pavilion at the Circular Quay area on the busy Sydney foreshore. We examine what difference this emphasis upon the audile made to the design process and to the design product, and how multimedia affects design.

series eCAADe
email
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_17.htm
last changed 2022/06/07 07:56

_id eb51
authors Coyne, Richard
year 1996
title CAAD, Curriculum and Controversy
doi https://doi.org/10.52842/conf.ecaade.1996.121
source Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
summary This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.

series eCAADe
email
more http://www.caad.ac.uk/~richard
last changed 2022/06/07 07:56

_id a84e
authors De Grassi, Mario and Giretti, Alberto
year 1995
title Applying Formal Methods to Multimedia Design Aid
doi https://doi.org/10.52842/conf.ecaade.1995.283
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 283-296
summary In the last decade we assisted at an evolution of computer aided design systems from drafting, calculation and simulation utilities toward systems able to support the conceptual phase of the design process. Systems supporting conceptual design use knowledge about the design domain and assume a will defined model of the design activity. Their computational framework is usually built by means of a set of representational schemata which lack a formal semantics. This aspect causes a limitation on the applicability of their computational framework to different domains. In this paper we propose a formal knowledge representation language, that has been defined in order to represent the structural relationships of domain knowledge. On the basis of language structure we propose a number of inferences tailored to case-based conceptual design aiding. Finally we apply the representational framework to the implementation of a computational architecture for conceptual design aiding that integrates multimedia representation of design cases with symbolic information processing. The architecture combines a knowledge representation server and a multimedia server. The knowledge representation server processes both domain knowledge and design experiences according to the Case Based Reasoning paradigm. The multimedia server produces the required case representation.

series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_34.htm
last changed 2022/06/07 07:55

_id a56e
authors Do, Ellen Yi-Luen
year 1995
title What's in a Diagram That a Computer Should Understand?
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 469-480
summary This paper reports on an experiment to test the feasibility of using a diagramming tool to access an architectural knowledge base. Our hypothesis is that designers only use a small set of conventional elements to make diagrams of architectural concepts. If this is true, then a scheme for retrieving information from computer knowledge bases using diagrams would work. Therefore we asked designers to make diagrams from texts, to interpret diagrams into texts, to pair diagrams and texts, and to comment on existing pairs from the case base. We found from the experiment that common features are shared between different designerís diagrams and texts.
keywords Architectural Diagrams, Graphic Interface, Knowledge Bases
series CAAD Futures
email
last changed 2004/10/04 07:49

_id 2036
authors Dzeng, R.J.
year 1995
title Caseplan: A Case-based Planer and Scheduler for Construction Using Product Modeling
source University of Michigan
summary Construction planning and scheduling are important to contractors for estimating the cost and duration of a project they are to bid on and construct. Many projects specify incentive and disincentive clauses for completing projects early and late. The timely completion and success of a project rely on good planning and scheduling. Contractors who repeatedly build the same kind of facilities acquire experience in scheduling the needed construction work. When parts of a facility's design are copied from one project to the next, the previously developed schedules could possibly be reused to schedule future work. This dissertation presents a construction planner and scheduler, named CasePlan, that automates the planning and scheduling process through the use of experience encoded in cases. CasePlan enables a contractor to specify a facility design using a product model, describe the relationships between product components and parts of a schedule (e.g., activity subnetworks, construction crews), and store this information as a case. As a decision support tool, CasePlan enables the contractor to search for cases whose facility designs are similar to that of a new project. The similarity assessment is based on the relative importance values that the contractor assigns to the components and their attributes in the product model. As an automation tool, CasePlan creates the schedule of a new project by reusing parts of the schedules whose associated designs are most similar to that project's design. The result is a schedule in which construction alternatives are chosen from those used in previous cases based on the new project scheduling constraints. The contractor / system-user can interact with CasePlan during its operation or modify the resulting schedule to add detail needed for executing the schedule in the field. Two types of construction projects have been studied for the development of CasePlan. One is the Kit-of-Parts post offices, in which designs are made by reusing design modules defined as Parts. The other is the boiler erection for fossil-fueled power plants, in which the design process is standardized and component configurations are similar across designs. These projects were chosen because their schedules are similar within each project type, which suggested that practitioners had a high incentive and were likely to reuse schedules. CasePlan's similarity assessment for boiler erection projects was validated using a survey. CasePlan's schedules and usability was subjectively evaluated also by the interviewed professionals.
series thesis:PhD
email
last changed 2003/02/12 22:37

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 19HOMELOGIN (you are user _anon_146805 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002