Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 313

Reformat results as: short short into frame detailed detailed into frame

_id	00e7
authors	Bushby, S.T.
year	1997
title	BACnetTM: a standard communication infrastructure for intelligent buildings
source	Automation in Construction 6 (5-6) (1997) pp. 529-540
summary	Intelligent buildings require integration of a variety of computer-based building automation and control system products that are usually made by different manufacturers. The exchange of information among these devices is critical to the successful operation of the building systems. Proprietary approaches to providing this communication have created great challenges for system integrators and hampered the development of intelligent building technology. Even though digital automation and control technology has been widely available for more than a decade and islands of automation are common, intelligent buildings with integrated building services are still more of a promise than a reality. BACnetTM is a standard communication protocol for building automation and control networks developed by the American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE, Standard 135-1995: BACnetTM--A Data Communication Protocol for Building Automation and Control Networks. American Society of Heating, Refrigerating, and Air-conditioning Engineers. Atlanta, Georgia, USA, 1995). BACnetTM provides the communication infrastructure needed to integrate products made by different vendors and to integrate building services that are now independent. This paper describes the main features of the BACnetTM protocol and early experience implementing it.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	9a5c
authors	Dave, B. and Schmitt, G.
year	1995
title	Information systems for spatial data
source	Automation in Construction 4 (1) (1995) pp. 17-28
summary	This paper describes the development of a prototype information system aimed at supporting representation and manipulation of models of urban areas. As a first step, we used aerial imagery to produce accurate digital models of various features of urban areas. The models comprise natural features like terrain data, water and vegetation systems, and man-made features like transportation network, land parcels, and built-up volumes. These data are represented in three dimensions, and they can be further linked with nongraphic attributes stored in an external database schemata. In this paper, we describe the architecture of the prototype system with a particular emphasis on the database aspects, various multimedia data types supported in the system, and operations to query and retrieve the represented data.
keywords	Spatial Systems; Multimedia Data; Integrated Environments
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:36

_id	27
authors	De Gregorio, R., Carmena, S., Morelli, R.D., AvendaÒo, C. and Lioi, C.
year	1998
title	La Construccion del Espacio del Poder. Museo de la Casa Rosada (The Construction of the Space of Power. Museum of the "Casa Rosada" (Argentinean Presidential House))
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 212-217
summary	The present work is part of the exposition "Francesco Tamburini, La ConstrucciÛn del Espacio del Poder I", exhibited in Rivadavia Cultural Center ( Rosario city), and in Casa Rosada Museum during 1997. The Exposition is based on an investigation program of the space that involves Casa Rosada, determining this space as the first piece of its collection. In 1995, when a group of argentines where visiting the picture gallery Pianetti (Jesi, Italy) there have been found some watercolours of Francesco Tamburini (1846-1890), planner of the main faÁades of the Government and author of many works. These watercolours have great value for architecture, and unknown by public, they have been the starting point of the Exposition. Among these argentines was Roberto De Gregorio architect, historian teacher of this school of architecture, and in charge of the historical investigation. C.I.A.D.'s specific work consists in converting in digital data Casa Rosada's faÁades. The two first stages, already completed, finished on the digital data conversion of facades, in front of Plaza de Mayo and Rivadavia street, with presidential access esplanade. Actually the work is centred on the two facades left and on the elaboration of an electronic model for the edition of a CD-ROM containing the information of the exposition.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	b5d9
authors	González, Guillermo and Gutiérrez, Liliana
year	1999
title	El TDE-AC: tecnología digital y estrategia pedagógica (The Tde-ac: Digital Technology and Pedagogical Strategy)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 269-271
summary	In 1995 the programming of a specialized, expert graphic software CA-TSD, began. The TSD acronym designates a graphic language derived from the theory of spatial delimitation, it systematizes all possibilities of selection and combination of flat and volumetric figures. It establishes necessary and sufficient morphic and tactic dimensions to account for all possible relationships of selection and combination. TSD proposes a syntactic reading of those formal, pure design operations underlying traditional representations. Tracings and complex configurations described by tree-hierarchical structures of simple configurations allow for a coherent syntactic analysis of the design structure of any object this will allow the construction of a pure design formula for the conscious and unconscious prefiguration operations of an artist or style in this presentation, we will use our proprietary CA-TSD software that will allow for fast verification of what's stated, including architecture and graphic design examples.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	5aec
authors	Heng, Chye-Kiang
year	1995
title	Digital Reconstruction of Medieval Chinese Cities
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 529-540
summary	The study and teaching of Chinese urban planning particularly of the earlier periods is heavily handicapped by the lack of pictorial or physical evidence. This is mainly due to the perishable nature of Chinese traditional construction which depended heavily on timber for both its structure and infill. Large architectural complexes were torched during wars and entire cities destroyed during dynastic upheavals. The Tang (618-906) capital of Chang'an is a classic example. Perhaps the foremost city in the world during the seventh and eighth centuries, it was reduced to wasteland by the beginning of the tenth century. The city now lies a little below the modem city of Xi'an, which occupies only a fraction of the Tang capital. The Northern Song (961-1127) capital, Kaifeng, also suffered similar fate when warfare and natural disasters eradicated the Song city. The ruins are buried five to twelve meters beneath present day Kaifeng. The earliest surviving imperial city is Ming (1368-1644) Beijing. By comparison, there are still substantial ruins from Athens and Rome in the Western world. The study of Chinese urban planning and the understanding of past urban structures are important as the influence of these urban structures are still discernible in historic Chinese cities today. While traditional Chinese architecture is perishable, traditional urban planning principles leaves their imprints much longer despite the frequent replacement of the physical urban fabric.
series	CAAD Futures
last changed	1999/08/03 17:16

_id	4cb3
authors	Kwartler, Michael
year	1995
title	Beyond the Adversial: Conflict Resolution, Simulation and Community Design
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	Fundamentally, the design of communities in the United States is grounded in the Constitution’s evolving definition of property and the rights and obligations attendant to the ownership and use of real property. The rearticulation of Jefferson’s dictum in the Declaration of Independence; “that individuals have certain inalienable rights, among these are life, liberty, and the pursuit of happiness” to the Constitution’s “life, liberty and property” represents a pragmatic understanding of the relationship between property and the actualization of the individual in society. In terms of community design, this means extensive public involvement and participation in not only the formulation of rules and regulations but of individual projects as well. Since the 1960’s as planning and community design decision making has become increasingly contentious, the American legal system’s adversial approach to conflict resolution has become the dominant model for public decision making. The legal system’s adversial approach to adjudication is essentially a zero-sum game of winners and losers, and as most land-use lawyers will agree, is not a good model for the design of cities. While the adversial approach does not resolve disputes it rarely creates a positive and constructive consensus for change. Because physical planning and community design issues are not only value based, community design through consensus building has emerged as a new paradigm for physical planning and design. The Environmental Simulation Center employs a broad range of complementary simulation and visualization techniques including 3-D vector based computer models, endoscopy, and verifiable digital photomontages to provide objective and verifiable information for projects and regulations under study. In this context, a number of recent projects will be discussed which have explored the use of various simulation and visualization techniques in community design. Among them are projects involved with changes in the City’s Zoning Regulations, the community design of a major public open space in one of the region’s mid-size cities, and the design of a new village center for a suburban community, with the last project employing the Center’s userfriendly and interactive 3-D computer kit of parts. The kit - a kind of computer “pattern book” is comprised of site planning, urban and landscape design and architectural conventions - is part of the Center’s continuing effort to support a consensus based, rather than adversial based, public planning and design process.
keywords	Architectural Simulation, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	24
authors	PayssÈ, M., Piperno, P., Grompone, J. and Somma, P.
year	1998
title	ReconstrucciÛn Virtual de la Colonia del Sacramento de 1762 (Virtual Reconstruction of "Colonia del Sacramento" of 1762)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 192-197
summary	Colonia del Sacramento (capital of Colonia department, in Uruguay) has been registered in the list of the Convention Heritage concerning the protection of worldwide cultural and natural heritage. The registration on this list (December 6th 1995) confirms the exceptional and universal value of a cultural or natural places which deserves protection for the whole humanity. The ancient Colonia del Sacramento founded in 1680 by Portugal, was a commercial and military site leading role of the historical controversy between Spain and Portugal. Main place of wars and treaties during a century, it keeps an urban design, unique in the area and valuable architectonical testimonies of different periods of this rich past, with a simple, popular profile. This work has been effected within the Clemente Estable Found 1996, which is promoted by National Council of Scientific and Technical Research (CONICYT). Through virtual reality techniques, a three-dimensional model of Colonia del Sacramento city was built as it was in its period of prosperity (around 1762). For the achievement of this digital maquette, a great deal of written and graphic information was compiled and processed. This information was organized in an inventory way (with numerous readings and searches). The inventory and the digital maquette were joined in a multimedia application (CD-ROM) which allows potential users to move through virtual city and friendly and interactively consult images, graphics and texts.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ecaade2024_361
id	ecaade2024_361
authors	Sochùrková, Petra; Devyatkina, Svetlana; Kordová, Sára; Vaško, Imrich; Tsikoliya, Shota
year	2024
title	Bioreceptive Parameters for Additive Manufacturing of Clay based Composites
doi	https://doi.org/10.52842/conf.ecaade.2024.1.045
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 45–54
summary	Due to climate change and the problematic amount of waste and CO2 emissions in the construction industry, non-human organisms and sustainable solutions are key motivators of the study. This paper focuses on developing a bioreceptive (Guillitte, 1995) composite suitable for additive manufacturing, composed to support growth of various organisms. It investigates key properties which have shown to be beneficial for promoting biological growth, such as water absorption, water permeability, humidity, and surface texture. The study evaluates the effect of two groups of clay-based waste additives, wooden sawdust (Arslan, et al., 2021) and sediment material sourced from local tunnel excavation in Prague. Simultaneously the need for intelligent reintegration and waste use is prevalent. Additive fabrication offers the ability to test a variety of composites and (re-)integrate them into the manufacturing processes. Current approach explores how to design artificial environments/skins for greenery and small life with the potential to improve both diversity and survivability while maintaining a better climate in its immediate surroundings. Bioreceptive design has the potential to improve the quality of the urban environment and bring new aesthetic influences into it (Cruz and Beckett 2016, p. 51-64).
keywords	Digital Design, Material Research, Bioreceptive Design, Robotic Fabrication, Additive Manufacturing, Experimental Pastes, Bio compatibility, Waste Materials, Clay Composites
series	eCAADe
email
last changed	2024/11/17 22:05

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	c3d0
authors	Cotton, John
year	1995
title	Solid Modeling as a Tool for Constructing Solar Envelopes
doi	https://doi.org/10.52842/conf.acadia.1995.253
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 253-260
summary	This paper presents a method for constructing solar envelopes in site planning using a 3D solid-modeling program as the tool. The solar envelope for a building site is a mechanism for ensuring that planning regulations on the solar access rights of other sites are observed. In this application, solid modeling offers the practical advantage of being a general-purpose tool having the capability to handle sets of site conditions that are quite complex. The paper reviews the concept of solar envelopes and demonstrates the method of application of solar-envelope construction to a site defined to avoid overly simplifying conditions. Techniques for displaying the constraints on building sections imposed by a solar envelope are presented as well.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	09b4
authors	Ismail, Ashraf and McCartney, Kevin
year	1993
title	A Tool for Conceptual Design Evaluation Based on Compliance with Site-Development Briefs and Related Planning Regulations
doi	https://doi.org/10.52842/conf.ecaade.1993.x.c6i
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are to check design compliance with the requirements of local planning authorities; characteristics evaluated will include building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. In addition to the common graphical output; i.c. plans, elevations and three dimensional models, it will generate textual analysis in report format to use as part of the Environmental Impact Analysis of proposed development. The tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out with architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of data for environmental statements. Second, field observation and participation will be carried out to observe decision-makers behaviour during assessment of building design proposals. A prototype is currently under development and will be tested against the expectations of the tool designer, Ashraf Ismail, and a team of professionals to be involved in the field studies. A critical analysis of the prototype design methodology and the study findings will be documented in the research thesis to be presented in June 1995.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9464
id	ddss9464
authors	McCartney, Kevin and Ismail, Ashraf Lotfy R. M.
year	1994
title	A Tool for Conceptual Design Evaluation Based on Compliance with Supplementary Planning Guidance and Local Planning Policies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are being designed in order to check design compliance with the requirements of local planning authorities; with regards to building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. The measures to determine proper evaluation will be based upon site-development briefs, and design guides produced by the local planning authorities. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. It will also provide many functions for editing two and three dimensional drawings specifically for the environmental analysis tasks. In addition to the common graphical output of Aut0CAD; i.e. plans, elevations and three dimensional models, the tool will generate textual analysis of the design in report format to use as part of the Environmental Impact Statement of proposed development. The speculative tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out tailor-made for architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of materials for environmental statements. Second, field observation will be carried out to observe the concerned professionals as decision-makers while assessing building design proposals. A prototype will be designed and then tested against the expectations of the tool designer, then the tool performance will be evaluated by a team of professionals participated in the field studies. A critical analysis of the prototype design methodology and the concluding study findings will be documented as part of a postgraduate research thesis to be completed in June 1995.
series	DDSS
last changed	2003/08/07 16:36

_id	23bd
authors	Oloufa, A.A. and Ikeda, M.
year	1995
title	An automated environment for soils- and terrain-dependent applications
source	Automation in Construction 4 (2) (1995) pp. 139-146
summary	This paper explains the development of an integrated information environment that is designed specifically for applications dependent on information related to soil types and terrain of the project site. This covers a wide variety of applications such as shallow and deep foundations, trenching, earthmoving and tunneling. The design of this environment takes into consideration the typical requirements of the project team with an emphasis on integrating requirements for both design and construction. The environment reported here is comprised of three main modules, a relational database for the storage and display of soil borelog information, a geographic information system that displays the geographical locations of soil studies, and a module that is used to develop a three-dimensional profile of the soil layers between any number of borelogs. The user may also develop cross sections of soil layers in any direction. This paper reports on the hardware and software used and concludes with a discussion of future extensions to the system.
keywords	Soil Database; GIS; Three-dimensional Soil Layers; Visualization; Integrated Environment; Terrain-Depen-dent Applications
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:42

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e100
authors	Bermudez, Julio and King, Kevin
year	1995
title	Architecture in Digital Space: Actual and Potential Markets
doi	https://doi.org/10.52842/conf.acadia.1995.405
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 405-423
summary	As both the skepticism and 'hype' surrounding electronic environments vanish under the weight of ever increasing power, knowledge, and use of information technologies, the architectural profession must prepare for significant expansion of its professional services. To address the issue, this paper offers a survey of the professional services architects and designers do and may provide in digital space, and who the potential clients are. The survey was conducted by interviews with software developers, gaming companies, programmers, investigators, practicing architects, faculty, etc. It also included reviews of actual software products and literary research of conference proceedings, journals, books and newspapers (i.e. articles, classified ads, etc.). The actual and potential markets include gaming and entertainment developments, art installations, educational applications, and research. These markets provide architects the opportunity to participate in the design of 3D gaming environments, educational software, architecture for public experience and entertainment, data representation, cyberspace and virtual reality studies, and other digital services which will be required for this new world. We will demonstrate that although the rapidly growing digital market may be seen by some to be non-architectural and thus irrelevant to our profession, it actually represents great opportunities for growth and development. Digital environments will not replace the built environment as a major architectural market, but they will significantly complement it, thus strengthening the entire architectural profession.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	07de
authors	Cheng, Nancy Yen-wen
year	1995
title	Linking the Virtual to Reality: CAD & Physical Modeling
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 303-311
summary	Using both study models and digital models for schematic design allows us to take advantage of the strengths of each. Models constructed manually benefit from spontaneous juxtapositions and serendipitous interactions with light and gravity. Converting these models into the digital realm allows the computer to take over in areas that it does best: geometric transformation, rigorous analysis, elaboration and co-ordination of details and complexity. As a project develops, CAD/CAM methods can generate forms or components for verifying the virtual representation. The paradigm of porting data to appropriate software tools needs to be extended to exporting out of and into the physical realm. Connecting to models in real space allows us to use senses that are not yet completely addressed by digital models.
keywords	Modeling, Representation, Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

For more results click below: