Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 394

Reformat results as: short short into frame detailed detailed into frame

_id	25e6
authors	Potamianos, I., Turner, J. and Jabi, W.
year	1995
title	Exploring the Proportions of Middle-Byzantine Churches: A Parametric Approach
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 483-493
summary	This paper examines two theories regarding the design principles of Byzantine churches through the use of 3D computer models produced by a programming language that allows the manipulation of the models parametrically to derive several instantiations by varying key dimensions. This geometry-based programming language, which is part of a larger solids modeling program, proved to be an excellent tool for determining the scope and the limiting cases of each of the two theories and the degree of their interrelationship.
keywords	Parametric Solids Modeling, CSG, Byzantine Churches
series	CAAD Futures
email
last changed	2002/02/20 22:02

_id	858f
authors	Glanville, Ranulph
year	1995
title	Architecture and Computing: A medium approach
doi	https://doi.org/10.52842/conf.acadia.1995.005
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 5-20
summary	In this paper, the argument is presented that the way in which computers are used in Architectural Design is based on and limited by our imaginings. Typically, computing is used as a tool to automate a process formerly carried out by a human rather than to expand our range of options. It is held that this is a very restricted way of using the computer and that architects and designers would be better served treating the computer as a medium, allowing it to act as a partner in design. Only then will the radical possibilities of computing become apparent, so that we may benefit from true interaction with them. Some specific limitations in our uses of computers are highlighted and ways that allow the computer to be more of an interacting partner are indicated, as are ways of exploring computing to extend the possibilities.
series	ACADIA
last changed	2022/06/07 07:51

_id	700a
authors	Martini, Kirk
year	1995
title	Hierarchical geometric constraints for building design
source	Computer-Aided Design, Vol. 27 (3) (1995) pp. 181-191
summary	Research and applications in parametric manipulation of geometry through constraints has been applied to the description of individual parts, and to the configuration of rigidparts within an assembly. Manipulating the geometry of an assembly such as a building often requires accounting for interaction between constraints governing shape andthose governing location. Most approaches use a nonhierarchical organization of constraints which makes it difficult to account for interaction of shape and locationconstraints. The paper describes a hierarchical constraint approach and implementation which addresses these issues.
keywords	Geometric Constraints, Assembly Modelling, Building Design
series	journal paper
last changed	2003/05/15 21:33

_id	c078
authors	Allegra, M, Fulantelli, G. and Mangiarotti, G.
year	1995
title	A New Methodology to Develop Hypermedia Systems for Architecture History
doi	https://doi.org/10.52842/conf.ecaade.1995.043
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 43-52
summary	This paper illustrates a research project concerning the analysis of architectural works through a comparative study based on hypermedia tools; by exploring the hypermedia, users can find the main subjects relative to the "method " of architectural planning. The use of multimedia in architecture allows the integration in a single system of different types of information which are necessary for the description of a work. texts, designs, photos and sounds. In addition, the hypertext information structure allows the direct intervention on analyzed projects, by pointing out the more important themes and their relationships. Users have the opportunity to immerse themselves in hypermedia and choose the subject to navigate through on each occasion. Our research project aims at developing a prototype concerning two architects. I.L.Kahn and F.L. Wright. The development methodology is based on the key role played by the components of architectonic works, thus allowing users to compare them in a simple and correct way. The methodology used in this work can be extended to other architects or periods, by simply changing the possibility of navigation, i.e. by changing the reading keys.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_6.htm
last changed	2022/06/07 07:54

_id	c05a
authors	Bridges, Alan
year	1995
title	Design Precedents for Virtual Worlds
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 293-302
summary	The usual precedents cited in relation to Cyberspace are William Gibson's book "Neuromancer" and Ridley Scott's film. "Bladerunner". This paper argues that, whilst literature and film are appropriate precedents, there are more suitable sources to refer to when designing virtual worlds. The paper discusses the use of computer modelling in exploring architectonic concepts in three-dimensional space. In doing so it draws on the philosophy of simulation and gives examples from alternative film and literature sources but concludes that one of the most appropriate metaphors is widely available in the form of the television soap opera.
keywords	Design Simulation, Space, Time, Virtual Reality
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	600e
authors	Gavin, Lesley
year	1999
title	Architecture of the Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.1999.418
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 418-423
summary	The Bartlett School of Graduate Studies, University College London (UCL), set up the first MSc in Virtual Environments in the UK in 1995. The course aims to synthesise and build on research work undertaken in the arts, architecture, computing and biological sciences in exploring the realms of the creation of digital and virtual immersive spaces. The MSc is concerned primarily with equipping students from design backgrounds with the skills, techniques and theories necessary in the production of virtual environments. The course examines both virtual worlds as prototypes for real urban or built form and, over the last few years, has also developed an increasing interest in the the practice of architecture in purely virtual contexts. The MSc course is embedded in the UK government sponsored Virtual Reality Centre for the Built Environment which is hosted by the Bartlett School of Architecture. This centre involves the UCL departments of architecture, computer science and geography and includes industrial partners from a number of areas concerned with the built environment including architectural practice, surveying and estate management as well as some software companies and the telecoms industry. The first cohort of students graduated in 1997 and predominantly found work in companies working in the new market area of digital media. This paper aims to outline the nature of the course as it stands, examines the new and ever increasing market for designers within digital media and proposes possible future directions for the course.
keywords	Virtual Reality, Immersive Spaces, Digital Media, Education
series	eCAADe
email
more	http://www.bartlett.ucl.ac.uk/ve/
last changed	2022/06/07 07:51

_id	4248
authors	Kalay, Y.E. and Skibniewski, M.J.
year	1995
title	Automation in Construction: Fulfilling the promise
source	Automation in Construction 4 (1) (1995) pp. 1-3
summary	Three years ago, Elsevier Science B.V. has embarked on one of the most important endeavors for the A/E/C community, worldwide. With the help of three dedicated individuals, it has inaugurated a new refereed journal devoted to discussing, critically examining and disseminating the latest developments affecting the processes that lead to the design, construction and use of buildings and other facilities. Unlike other jour-nals in this field, Automation in Construction has been dedicated to exploring the processes and tools used by the A/E/C community, rather than its products. It has been dedicated to issues concerning the A/ E / C community specifically, and to methods, practices and tools that make use of computers in particular, thereby filling a void which existed, until its inauguration, within the A/E/C community's publications.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:30

_id	640d
authors	Koszewski, Krysztof
year	1995
title	Communication of Ideas in Architecture Versus Computer Techniques
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 171-180
summary	Computer as a tool in architects' work is an obvious thing for near all of us. Recent two - three years have shown that probably the most revolutionary feature of computers is their immense possibility of usage in today's communication techniques, the continuous flow of information. This fact makes us to think about computer techniques as an useful tool not only in designing, but also in extensive presenting of ideas - like communication between architects and all the others involved in the designing and building process. Presenting ideas requires prior process of gathering data and storing it in computers' memory. Incredible progress in ways of organizing information leads also to the idea of developing a sketch of a standard of the amount and structure of information gathered to make it an universal set of parameters describing the design - a multi - functional database. The first part (presenting ideas) is more to be used in Poland by now. Architects should appreciate benefits of an impressive presentation and they already started to. The universal database for use by everyone, or rather a file of the project, which presentation is a part of, is rather a theory by now. But exploring it’s potential and a real need to create one - is essential.
series	plCAD
email
last changed	2003/05/17 10:01

_id	3f92
authors	Saad, Milad and Maher, Mary Lou
year	1995
title	Exploring the Possibilities for Computer Support for Collaborative Designing
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 727-737
summary	Design projects require a collaboration of individuals and a coordination of information and tasks. Computer support for design, more specifically CAD systems, have been developed to support a single user through a graphical interface and project teams through distributed data. This paper considers recent developments in computer support for synchronous collaborative design. The possibilities for developing a support environment for synchronous collaborative design cover a broad range of technical and personal considerations. We explore these possibilities by presenting several perspectives of the technical considerations and options, followed by a discussion of how such environments have the potential to enable a shared understanding among people as they are designing.
keywords	Collaborative Design, Groupware, Shared CAD.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	21d7
authors	Siitonen, Petri
year	1995
title	Future of Endoscopy, Updated
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	This paper covers research based on a case study comparing CAD and Endoscopy in exploring, generating and illustrating architectural designs. Findings are compared to the former evaluation to study the trend how Endoscopy and CAD stand to each other.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	e320
authors	Stellingwerff, M. and Breen, J.
year	1995
title	Applications of Optical and Digital Endoscopy
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	The Media Research Group at the Faculty of Architecture is currently exploring the opportunities of visualization media such as optical endoscopy and computer aided simulation techniques. The research program focuses on the influence of such media in the design process on an architectural and urban level and on creative applications for the benefit of research and education. The Aspern case-study in the framework of the 2nd EAEA-Conference has been used as a pilot study for emerging applications for design simulation. This contribution compares the possible use of optical endoscopes and three types of computer programs which may be viewed as digital endoscopes.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
doi	https://doi.org/10.52842/conf.ecaade.1995.139
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	8a8a
authors	Akin, Ö., Sen, R., Donia,M. and Zhang, Y.
year	1995
title	SEED-Pro: Computer-Assisted Architectural Programming in SEED
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 153-161
summary	Computer-assisted architectural programming is in its infancy. What there is in terms of architectural programming theory often differs from practice. In the first half of this paper we define relevant terms, provide abrief review of the state of the art, and draw attention to the primacy of architectural programming in design. SEED-Pro is introduced as an intelligent assistant providing structure to the normally open-endedactivities of design. This includes the creation of an architectural program from scratch. In the second, more technical, part of the paper we emphasize three specific topics. The design problem specificationfunctionality is described. The generation and evaluation of the emerging architectural program is discussed. An approach to the decomposition of the architectural program into alternative hierarchies is provided.The paper concludes with a discussion of what is and remains to be accomplished.
series	journal paper
email
last changed	2003/05/15 21:27

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	00ae
id	00ae
authors	Ataman, Osman
year	1995
title	Building A Computer Aid for Teaching Architectural Design Concepts
doi	https://doi.org/10.52842/conf.acadia.1995.187
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 187-208
summary	Building an aid for teaching architectural design concepts is the process of elaborating topics, defining problems and suggesting to the students strategies for solving those problems. I believe students in Environment and Behavior (E&B) courses at Georgia Tech can benefit greatly from a computer based educational tool designed to provide them with experiences they currently do not possess. In particular, little time in the course (outside lectures) is devoted to applying concepts taught in the course to the studio projects. The tool I am proposing provides students with an opportunity to critique architectural environments (both simple examples and previous projects) using a single concept, "affordances". This paper describes my current progress toward realizing the goal of designing a tool that will help the students to understand particular concepts and to integrate them into their designs. It is my claim that an integrative and interactive approach - creating a learning environment and making both the students and the environment mutually supportive- is fundamentally more powerful than traditional educational methods.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	aab6
authors	Bermudez, Julio
year	1995
title	Designing Architectural Experiences: Using Computers to Construct Temporal 3D Narratives
doi	https://doi.org/10.52842/conf.acadia.1995.139
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 139-149
summary	Computers are launching us into a representational revolution that fundamentally challenges the way we have hitherto conceived and practiced architecture. This paper will explore one of its fronts: the simulation of architectural experiences. Today's off-the-shelf softwares (e.g. 3D modeling, animations, multimedia) allow us for first time in history to depict and thus approach architectural design and criticism truly experientially. What is so appealing about this is the possibility of shifting our attention from the object to the experience of the object and in so doing reconceptualizing architectural design as the design of architectural experiences. Carrying forward such a phenomenological proposition requires us to know (1) how to work with non-traditional and 'quasi-immersive' (or subject-centered) representational systems, and (2) how to construct temporal assemblages of experiential events that unfold not unlike 'architectural stories'. As our discipline lacks enough knowledge on this area, importing models from other fields appears as an appropriate starting point. In this sense, the narrative arts (especially those involved with the temporal representation of audio-visual narratives) offer us the best insights. For example, principles of cinema and storytelling give us an excellent guidance for designing architectural experiences that have a structuring theme (parti), a plot (order), unfolding episodes (rhythm), and special events (details). Approaching architecture as a temporal 3D narrative does transform the design process and, consequently, its results. For instance, (1) phenomenological issues enter the decision making process in an equal footing to functional, technological, or compositional considerations; (2) orthographic representations become secondary sources of information, mostly used for later accurate dimensioning or geometrization; (3) multi-sensory qualities beyond sight are seriously considered (particularly sound, texture, and kinesthetic); etc.
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: