CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 398

_id 6dc4
authors Moeck, Martin and Selkowitz, Steven
year 1995
title A Computer-Based Daylight Systems Design Tool
source Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 261-279
doi https://doi.org/10.52842/conf.acadia.1995.261
summary Currently numbers like illuminance or glare index are used for the evaluation of daylight system designs. We propose to use photorealistic pictures in addition to numbers as a way to assess the quality of a design solution. This is necessary since numbers-based performance criteria, that are currently in use, are either not sufficient to evaluate performance, or they require expert knowledge for interpretation. The paper discusses the implications and ramifications of this approach.
keywords interactive Simulation, Non-numerical Performance Criteria, Photorealism, Visual Comfort, Performance Based Visualization, Indirect Evaluation of Performance
series ACADIA
last changed 2022/06/07 07:58

_id aa01
authors Butelski, Kazimierz
year 1995
title On Similarities between the Conventions of Computer Modelling and the Creation of Architectural Form
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 71-74
doi https://doi.org/10.52842/conf.ecaade.1995.071
summary The following remarks relate to the creation of a geometric representation, which determines the future form of a building. I also discuss the relation between the three main conventions of computer modelling: Constructive Solid Geometry, Boundary Representation, Metagraphics and the currently design methods. For the sake of comparison, I selected three contemporary architects, Zaha Hadid, Arata Isozaki and Rob Krier represent mutually opposed, and also strongly ideological currents in today´s architecture, Arata Isozaki occupies the middle ground.
series eCAADe
email
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_9.htm
last changed 2022/06/07 07:54

_id bf5f
authors Chen, Xiangping
year 1995
title Representation, Evaluation and Edition of Feature-based and Constraint- based Design
source Purdue University
summary This thesis investigates a general and systematic approach to feature-based and constraint-based design. We combine feature-based design and constraint-based design by globally decomposing a design into a sequence of feature attachments and locally defining and positioning each feature by constraints. Analogous to the concept of high-level programming languages, we formalize a layered design model that eliminates the dependency of a design representation on a solid modeler. With this design model, design intent, such as feature descriptions and constraints, is stored in an unevaluated, modeler-independent design representation while the geometry to which it corresponds is stored in an evaluated, modeler-dependent design representation. The separation essentially relies on a naming and matching schema that converts between a geometric reference and a generic name, and a design compiler that automatically instantiates the unevaluated design representation to an evaluated design representation with respect to a solid modeler. The geometric references for defining feature attributes and constraints are recorded with their generic names in the unevaluated design representation. We propose several techniques for naming geometric entities unambiguously. The design compilation or instantiation involves remapping a generic name back to a geometric reference in the selected geometric modeler, solving constraints and implementing feature operations or attachments. Instead of developing a constraint solver for this design compiler, we use an independent and general solver. Feature attachment operations are different from classical Boolean operations in solid modeling. However, we provide a semantics for them that is based on existing operations in solid modeling. The layered design model allows users to edit archived conceptual designs to derive new designs quickly. We investigate the coordination of later features in the unevaluated and modeler-independent representation when a feature is edited and provide a method for editing feature-based and constraint-based design. We also discuss how to extend this work to a commercial feature-based and constraint-based CAD system.  
series thesis:PhD
last changed 2003/02/12 22:37

_id ecaade2022_398
id ecaade2022_398
authors Dzurilla, Dalibor and Achten, Henri
year 2022
title What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
source Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
doi https://doi.org/10.52842/conf.ecaade.2022.1.389
summary The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords Architectural Sketch, Digital Sketch, Effective Visual Communication
series eCAADe
email
last changed 2024/04/22 07:10

_id da78
authors Hajduk, Piotr
year 1995
title Spirit 5.6
source CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 105-119
summary SPIRIT is an independent, technical program which aids an architecture design. It has been created for architects and specialists of related trades. This program is divided into three functional parts: threedimensional functions, two-dimensional functions and a module part. The communication between these parts is devoid of problems. Rich and light to develop data bases which include information about walls, windows, doors, furnitures and others elements are the integral part of this program. Elements are connected to libraries of symbols. A two-dimensional drawing does not stray to methods knowing from other CAD-programs. An interesting set of functions helping by drawing views is ARCH2D. It lets drawing walls with selected thickness and inserting openings like windows and doors. Three dimensional elements are made from simple masses like a plate, a sphere, a cylinder, a torus. Every object can be seen from whichever perspective you like. Most helpful is there a shader function which creates coloured view including light and shadow. Every three-dimensional object can be converted to vectorial, two-dimensional drawing which can be plotted or enlarged.
series plCAD
last changed 2000/01/24 10:08

_id 1fbd
authors Kelly, J.G., Aouad, G., Rezgui, Y.and Crofts, J.
year 1997
title Information systems developments in the UK construction industry
source Automation in Construction 6 (1) (1997) pp. 17-22
summary The paper is based on a synopsis of work completed in 1995 as part of the 'Building IT 2005' project in the UK (J.G. Kelly, Procurement information systems, Building IT 2005, Construction IT Forum, Cambridge, 1995). Selected current UK research is reported and a revised view of the future is offered on the basis of this new work.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 647a
authors Kirschner, Ursula
year 1996
title Teaching Experimental Design with CAAD
source Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 221-226
doi https://doi.org/10.52842/conf.ecaade.1996.221
summary 2-D CAAD is the standard tool in architectural work and education. whereas 3-dimensional CAAD is still used to present a finished design. This paper demonstrates that experimental design in 3-D allows students to deal with new methods of design. At North East Lower Saxony Polytechnic, 1995 saw the beginning of development of didactic methods for teaching design with the interactive use of common 3-D CAAD tools. Six exercises were devised, the first two being 2-D exercises in urban and layout design. Subsequent steps introduced three styles of architectural designing with 3-D tools. The students selected one of these styles for their three-day exercise in urban planning. Based on the results, three main ways were developed: the "digital toolkit", the "additive design approach" and the "lighting simulation".
series eCAADe
last changed 2022/06/07 07:52

_id eff2
authors Sinclair, Brian
year 1995
title Architecture in the Environment: A Technology-Centered Model for Priomary, Secondary & Post-Secondary Educational Partnership
source Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 357-370
doi https://doi.org/10.52842/conf.acadia.1995.357
summary Societal appreciation of architecture, the environment and the role of design & planning professionals should begin early in the educational stream. Working from this premise, a model was developed which relied on a combination of learning strategies: Cognitive, Psychomotor and Affective. The project’s primary goal was to build knowledge of architecture and the environment in K-12 children, with particular emphasis on primary levels. More specifically, the ARCH was selected thematically as a strong architectonic element through which to promote a better connection with and responsibility for the environment. The educational experience comprised three sequential forms: visual history of the ARCH, physical construction using foam blocks, and finally "construction” in the computer using a multi-media interactive three-dimensionally focused program. Pedagogically the sequencing provided explanation and context, built awareness through making, and finally reinforced the lessons of the previous steps while highlighting the potential of information technology. To deliver the curriculum an installation was built at a local museum, with primary grade children arriving on field trips. Architecture faculty and students designed the curriculum and installation, including the computer modules. Secondary school students were trained, with the intention that they would in turn educate primary school students at the installation. In disseminating knowledge downwards through the various educational levels, awareness was promoted concerning the architects role, architectural elements, and the broader built environment. Using the ARCH as the theme, realization of the inter-connectedness of the environment was advanced. Through linking and learning, participants came to better understand the value of their individual contributions and the critical need for collaboration.

series ACADIA
email
last changed 2022/06/07 07:56

_id b633
authors Tan, Milton and Teh, Robert (Eds.)
year 1995
title The Global Design Studio [Conference Proceedings]
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, 779 p.
summary 1995 marks the 10th anniversary of the CAAD Futures series of international conferences which is dedicated to "promoting (...) the advancement of computer-aided architectural design in the service of those concerned with the quality of the built environment". It also marks the first time this important forum is held in Asia; hosted by the School of Architecture, National University of Singapore. This proceedings is a compilation of the sixty nine papers which were selected by an International Review Committee and presented at the conference in Singapore on 24-26 September 1995. The Chapters are organised according to the themes covered by the conference -Electronic Design Media, Environmental Simulation & Decision Support, Generative Systems, Scene and Product Modelling, Virtual Reality, Information Delivery Systems & Geographic Information Systems, Shape Grammar, Recognition & Emergence, Precedence & Prototypes, Case-based Reasoning, and Cooperative Design.
series CAAD Futures
email
last changed 2003/05/16 20:58

_id 0c8e
authors Ager, Mark Thomas and Sinclair, Brian R.
year 1995
title StereoCAD: Three Dimensional Representation
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 343-355
summary Concepts of stereoscopic vision have been around for more than two thousand years. Despite this long history, its application to the field to architecture and design seems relatively unexplored. Synthesis of two technologies, the stereoscope and the computer, was the focus of the present study. The goal of the research was to determine if computer-generated stereoscopic pairs hold value for architectural design. Using readily available computer technology (Apple Macintosh) the research team modelled and rendered an existing project to verify the degree of correlation between the physical construct, the computer 3D model and resultant correlation between the physical construct, the computer 3D model and resultant rendered stereo-paired representation. The experiments performed in this study have shown that producing stereo-paired images that highly correlate to reality is possible using technology that is readily available in the marketplace. Both the technology required to produce (i.e., personal computer and modelling/rendering software) and view (i.e., modified stereoscope) the images is unimposing. Both devices can easily fit in a studio or a boardroom and together can be utilized effectively to permit designers, clients and end-users to experience proposed spaces and projects. Furthermore, these technologies are familiar (clients and end-users have already experienced them in other applications and settings) and assume a fraction of the cost of more dynamic, immersive virtual reality systems. Working from this base, limitations of the process as well as future applications of computer-generated stereoscopic images are identified.
keywords Stereovision, Representation, Computers, Architects, Design
series CAAD Futures
last changed 2003/11/21 15:15

_id c078
authors Allegra, M, Fulantelli, G. and Mangiarotti, G.
year 1995
title A New Methodology to Develop Hypermedia Systems for Architecture History
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 43-52
doi https://doi.org/10.52842/conf.ecaade.1995.043
summary This paper illustrates a research project concerning the analysis of architectural works through a comparative study based on hypermedia tools; by exploring the hypermedia, users can find the main subjects relative to the "method " of architectural planning. The use of multimedia in architecture allows the integration in a single system of different types of information which are necessary for the description of a work. texts, designs, photos and sounds. In addition, the hypertext information structure allows the direct intervention on analyzed projects, by pointing out the more important themes and their relationships. Users have the opportunity to immerse themselves in hypermedia and choose the subject to navigate through on each occasion. Our research project aims at developing a prototype concerning two architects. I.L.Kahn and F.L. Wright. The development methodology is based on the key role played by the components of architectonic works, thus allowing users to compare them in a simple and correct way. The methodology used in this work can be extended to other architects or periods, by simply changing the possibility of navigation, i.e. by changing the reading keys.

series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_6.htm
last changed 2022/06/07 07:54

_id 0bbb
authors Alshawi, Mustafa
year 1995
title Dynamic Generation of Design Plans at the Brief Stage
source Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series CAAD Futures
email
last changed 2003/11/21 15:15

_id 1a52
authors Amor, R., Augenbroe, G., Hosking, J., Rombouts and W., Grundy, J.
year 1995
title Directions in modelling environments
source Automation in Construction 4 (3) (1995) pp. 173-187
summary Schema definition is a vital component in the computerised A/E/C projects. existing tools to manage this task are limited both in terms of the scope Of problems they can tackle and their integration with each other. This paper describes a global modellling and development environment for large modelling projects. This environment provides a total solution from initial design of schemas to validation, manipulation arid navigation through final models. A major benefit of the described system is the ability to provide multiple views of evolving schemas (or models) in both graphical and textual forms This allows modellers to visualise their schemas and instance models either textually or graphically as desired. The system automatically maintains the Conisistency of the informalion in these views even when modifications are made in other views. Simple and intuitive view navigation methods allow required information to he rapidly accessed. The environment supports strict checking of model instances and schemas in one of the major ISO-standardised modelling languages no used in product data technology. Ill this paper we show how such a modelling environment has been constructed for evaluation in the JOULE founded COMBINE project.
keywords Modelling Environment; Consistency; Multiple Views: Views; Building Models; Information Management; Integrated System; Product Modelling
series journal paper
email
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 14:33

_id 00ae
id 00ae
authors Ataman, Osman
year 1995
title Building A Computer Aid for Teaching Architectural Design Concepts
source Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 187-208
doi https://doi.org/10.52842/conf.acadia.1995.187
summary Building an aid for teaching architectural design concepts is the process of elaborating topics, defining problems and suggesting to the students strategies for solving those problems. I believe students in Environment and Behavior (E&B) courses at Georgia Tech can benefit greatly from a computer based educational tool designed to provide them with experiences they currently do not possess. In particular, little time in the course (outside lectures) is devoted to applying concepts taught in the course to the studio projects. The tool I am proposing provides students with an opportunity to critique architectural environments (both simple examples and previous projects) using a single concept, "affordances". This paper describes my current progress toward realizing the goal of designing a tool that will help the students to understand particular concepts and to integrate them into their designs. It is my claim that an integrative and interactive approach - creating a learning environment and making both the students and the environment mutually supportive- is fundamentally more powerful than traditional educational methods.

series ACADIA
email
last changed 2022/06/07 07:54

_id 276c
authors Breen, Jack
year 1995
title Dynamic Perspective: The Media Research Programme
source The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary This paper focuses on the Research Programme of the Media Sector at the Faculty of Architecture, Delft University of Technology. The media research objectives for the coming years have been brought together with an overall project: “Dynamic Perspective”. The “dynamic” quality may be interpreted both as movement (visual displacement and registration) and as change (the effects of different options).

The four projects which together make up this research programme deal with perception (understanding) and conception (designing and imaging) of urban space: “the architecture of the city”. Specific aspects are the effects of primary and secondary spatial boundaries and the systematic structuring of simulation of visual information. The programme will further concentrate on the development and implementation of relevant techniques (besides “traditional” ones such as the drawing and the architectural model, on multimedia techniques such as endoscopy, computer visualization and development of virtual reality systems), both in education and in design practice.

By means of analysis, the creation of visual models of choice and the setting up of experiments, the programme aims at the furthering of theoretical knowledge and at acquiring better insights into the effects of design decisions at an urban level, both for designers and for other participants in the design process. Further development of existing laboratory facilities towards a comprehensive Design Simulation Laboratory is an important aspect of the programme.

Within the media research process the Aspern location master plan has been considered as a case study, the findings of which will be presented separately in the workshop sessions.

keywords Architectural Endoscopy, Real Environments
series EAEA
email
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id cf51
authors Cheng, Nancy Yen-wen
year 1995
title By All Means: Multiple Media In Design Education
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 117-128
doi https://doi.org/10.52842/conf.ecaade.1995.117
summary This paper describes how to combine media to maximize understanding in CAD education. Advantages such as synergistic communication, clarification of common concepts and awareness of media characteristics are illuminated through digital and traditional projects. Learning computer media through communication exercises is discussed with examples from networked collaborations using the World Wide Web. Language teaching shows how to use these exercises to encourage critical thinking in a CAD curriculum.

series eCAADe
email
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_16.htm
last changed 2022/06/07 07:55

_id 80df
authors Cook, Alan R.
year 1995
title Stereopsis in the Design and Presentation of Architectural Works
source Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 113-137
doi https://doi.org/10.52842/conf.acadia.1995.113
summary This article presumes the primacy of spatial cognition in evaluating architectural designs and begins by describing key concepts involved in the perception of spatial form, focussing on parallax and stereoscopy. The ultimate emphasis is directed at presenting techniques which employ computers with modest hardware specifications and a basic three-dimensional modeling software application to produce sophisticated imaging tools. It is argued that these techniques are comparable to high end computer graphic products in their potentials for carrying information and in some ways are superior in their speed of generation and economies of dissemination. A camera analogy is considered in relation to controlling image variables. The ability to imply a temporal dimension is explored. An abbreviated summary of pertinent binocular techniques for viewing stereograms precedes a rationalization and initiation for using the cross-convergence technique. Ways to generate and view stereograms and other multiscopic views using 3-D computer models are described. Illustrations from sample projects show various levels of stereogram rendering including the theoretically 4-D wireframe stereogram. The translated perspective array autostereogram is presented as an economical and easily reproducible alternative to holography as well as being a substitute for stop action animation.

series ACADIA
email
last changed 2022/06/07 07:56

_id 2036
authors Dzeng, R.J.
year 1995
title Caseplan: A Case-based Planer and Scheduler for Construction Using Product Modeling
source University of Michigan
summary Construction planning and scheduling are important to contractors for estimating the cost and duration of a project they are to bid on and construct. Many projects specify incentive and disincentive clauses for completing projects early and late. The timely completion and success of a project rely on good planning and scheduling. Contractors who repeatedly build the same kind of facilities acquire experience in scheduling the needed construction work. When parts of a facility's design are copied from one project to the next, the previously developed schedules could possibly be reused to schedule future work. This dissertation presents a construction planner and scheduler, named CasePlan, that automates the planning and scheduling process through the use of experience encoded in cases. CasePlan enables a contractor to specify a facility design using a product model, describe the relationships between product components and parts of a schedule (e.g., activity subnetworks, construction crews), and store this information as a case. As a decision support tool, CasePlan enables the contractor to search for cases whose facility designs are similar to that of a new project. The similarity assessment is based on the relative importance values that the contractor assigns to the components and their attributes in the product model. As an automation tool, CasePlan creates the schedule of a new project by reusing parts of the schedules whose associated designs are most similar to that project's design. The result is a schedule in which construction alternatives are chosen from those used in previous cases based on the new project scheduling constraints. The contractor / system-user can interact with CasePlan during its operation or modify the resulting schedule to add detail needed for executing the schedule in the field. Two types of construction projects have been studied for the development of CasePlan. One is the Kit-of-Parts post offices, in which designs are made by reusing design modules defined as Parts. The other is the boiler erection for fossil-fueled power plants, in which the design process is standardized and component configurations are similar across designs. These projects were chosen because their schedules are similar within each project type, which suggested that practitioners had a high incentive and were likely to reuse schedules. CasePlan's similarity assessment for boiler erection projects was validated using a survey. CasePlan's schedules and usability was subjectively evaluated also by the interviewed professionals.
series thesis:PhD
email
last changed 2003/02/12 22:37

_id db00
authors Espina, Jane J.B.
year 2002
title Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords database, digital format, modern architecture, model, mapping
series SIGRADI
email
last changed 2016/03/10 09:51

_id 2068
authors Frazer, John
year 1995
title AN EVOLUTIONARY ARCHITECTURE
source London: Architectural Association
summary In "An Evolutionary Architecture", John Frazer presents an overview of his work for the past 30 years. Attempting to develop a theoretical basis for architecture using analogies with nature's processes of evolution and morphogenesis. Frazer's vision of the future of architecture is to construct organic buildings. Thermodynamically open systems which are more environmentally aware and sustainable physically, sociologically and economically. The range of topics which Frazer discusses is a good illustration of the breadth and depth of the evolutionary design problem. Environmental Modelling One of the first topics dealt with is the importance of environmental modelling within the design process. Frazer shows how environmental modelling is often misused or misinterpreted by architects with particular reference to solar modelling. From the discussion given it would seem that simplifications of the environmental models is the prime culprit resulting in misinterpretation and misuse. The simplifications are understandable given the amount of information needed for accurate modelling. By simplifying the model of the environmental conditions the architect is able to make informed judgments within reasonable amounts of time and effort. Unfortunately the simplications result in errors which compound and cause the resulting structures to fall short of their anticipated performance. Frazer obviously believes that the computer can be a great aid in the harnessing of environmental modelling data, providing that the same simplifying assumptions are not made and that better models and interfaces are possible. Physical Modelling Physical modelling has played an important role in Frazer's research. Leading to the construction of several novel machine readable interactive models, ranging from lego-like building blocks to beermat cellular automata and wall partitioning systems. Ultimately this line of research has led to the Universal Constructor and the Universal Interactor. The Universal Constructor The Universal Constructor features on the cover of the book. It consists of a base plug-board, called the "landscape", on top of which "smart" blocks, or cells, can be stacked vertically. The cells are individually identified and can communicate with neighbours above and below. Cells communicate with users through a bank of LEDs displaying the current state of the cell. The whole structure is machine readable and so can be interpreted by a computer. The computer can interpret the states of the cells as either colour or geometrical transformations allowing a wide range of possible interpretations. The user interacts with the computer display through direct manipulation of the cells. The computer can communicate and even direct the actions of the user through feedback with the cells to display various states. The direct manipulation of the cells encourages experimentation by the user and demonstrates basic concepts of the system. The Universal Interactor The Universal Interactor is a whole series of experimental projects investigating novel input and output devices. All of the devices speak a common binary language and so can communicate through a mediating central hub. The result is that input, from say a body-suit, can be used to drive the out of a sound system or vice versa. The Universal Interactor opens up many possibilities for expression when using a CAD system that may at first seem very strange.However, some of these feedback systems may prove superior in the hands of skilled technicians than more standard devices. Imagine how a musician might be able to devise structures by playing melodies which express the character. Of course the interpretation of input in this form poses a difficult problem which will take a great deal of research to achieve. The Universal Interactor has been used to provide environmental feedback to affect the development of evolving genetic codes. The feedback given by the Universal Interactor has been used to guide selection of individuals from a population. Adaptive Computing Frazer completes his introduction to the range of tools used in his research by giving a brief tour of adaptive computing techniques. Covering topics including cellular automata, genetic algorithms, classifier systems and artificial evolution. Cellular Automata As previously mentioned Frazer has done some work using cellular automata in both physical and simulated environments. Frazer discusses how surprisingly complex behaviour can result from the simple local rules executed by cellular automata. Cellular automata are also capable of computation, in fact able to perform any computation possible by a finite state machine. Note that this does not mean that cellular automata are capable of any general computation as this would require the construction of a Turing machine which is beyond the capabilities of a finite state machine. Genetic Algorithms Genetic algorithms were first presented by Holland and since have become a important tool for many researchers in various areas.Originally developed for problem-solving and optimization problems with clearly stated criteria and goals. Frazer fails to mention one of the most important differences between genetic algorithms and other adaptive problem-solving techniques, ie. neural networks. Genetic algorithms have the advantage that criteria can be clearly stated and controlled within the fitness function. The learning by example which neural networks rely upon does not afford this level of control over what is to be learned. Classifier Systems Holland went on to develop genetic algorithms into classifier systems. Classifier systems are more focussed upon the problem of learning appropriate responses to stimuli, than searching for solutions to problems. Classifier systems receive information from the environment and respond according to rules, or classifiers. Successful classifiers are rewarded, creating a reinforcement learning environment. Obviously, the mapping between classifier systems and the cybernetic view of organisms sensing, processing and responding to environmental stimuli is strong. It would seem that a central process similar to a classifier system would be appropriate at the core of an organic building. Learning appropriate responses to environmental conditions over time. Artificial Evolution Artificial evolution traces it's roots back to the Biomorph program which was described by Dawkins in his book "The Blind Watchmaker". Essentially, artificial evolution requires that a user supplements the standard fitness function in genetic algorithms to guide evolution. The user may provide selection pressures which are unquantifiable in a stated problem and thus provide a means for dealing ill-defined criteria. Frazer notes that solving problems with ill-defined criteria using artificial evolution seriously limits the scope of problems that can be tackled. The reliance upon user interaction in artificial evolution reduces the practical size of populations and the duration of evolutionary runs. Coding Schemes Frazer goes on to discuss the encoding of architectural designs and their subsequent evolution. Introducing two major systems, the Reptile system and the Universal State Space Modeller. Blueprint vs. Recipe Frazer points out the inadequacies of using standard "blueprint" design techniques in developing organic structures. Using a "recipe" to describe the process of constructing a building is presented as an alternative. Recipes for construction are discussed with reference to the analogous process description given by DNA to construct an organism. The Reptile System The Reptile System is an ingenious construction set capable of producing a wide range of structures using just two simple components. Frazer saw the advantages of this system for rule-based and evolutionary systems in the compactness of structure descriptions. Compactness was essential for the early computational work when computer memory and storage space was scarce. However, compact representations such as those described form very rugged fitness landscapes which are not well suited to evolutionary search techniques. Structures are created from an initial "seed" or minimal construction, for example a compact spherical structure. The seed is then manipulated using a series of processes or transformations, for example stretching, shearing or bending. The structure would grow according to the transformations applied to it. Obviously, the transformations could be a predetermined sequence of actions which would always yield the same final structure given the same initial seed. Alternatively, the series of transformations applied could be environmentally sensitive resulting in forms which were also sensitive to their location. The idea of taking a geometrical form as a seed and transforming it using a series of processes to create complex structures is similar in many ways to the early work of Latham creating large morphological charts. Latham went on to develop his ideas into the "Mutator" system which he used to create organic artworks. Generalising the Reptile System Frazer has proposed a generalised version of the Reptile System to tackle more realistic building problems. Generating the seed or minimal configuration from design requirements automatically. From this starting point (or set of starting points) solutions could be evolved using artificial evolution. Quantifiable and specific aspects of the design brief define the formal criteria which are used as a standard fitness function. Non-quantifiable criteria, including aesthetic judgments, are evaluated by the user. The proposed system would be able to learn successful strategies for satisfying both formal and user criteria. In doing so the system would become a personalised tool of the designer. A personal assistant which would be able to anticipate aesthetic judgements and other criteria by employing previously successful strategies. Ultimately, this is a similar concept to Negroponte's "Architecture Machine" which he proposed would be computer system so personalised so as to be almost unusable by other people. The Universal State Space Modeller The Universal State Space Modeller is the basis of Frazer's current work. It is a system which can be used to model any structure, hence the universal claim in it's title. The datastructure underlying the modeller is a state space of scaleless logical points, called motes. Motes are arranged in a close-packing sphere arrangement, which makes each one equidistant from it's twelve neighbours. Any point can be broken down into a self-similar tetrahedral structure of logical points. Giving the state space a fractal nature which allows modelling at many different levels at once. Each mote can be thought of as analogous to a cell in a biological organism. Every mote carries a copy of the architectural genetic code in the same way that each cell within a organism carries a copy of it's DNA. The genetic code of a mote is stored as a sequence of binary "morons" which are grouped together into spatial configurations which are interpreted as the state of the mote. The developmental process begins with a seed. The seed develops through cellular duplication according to the rules of the genetic code. In the beginning the seed develops mainly in response to the internal genetic code, but as the development progresses the environment plays a greater role. Cells communicate by passing messages to their immediate twelve neighbours. However, it can send messages directed at remote cells, without knowledge of it's spatial relationship. During the development cells take on specialised functions, including environmental sensors or producers of raw materials. The resulting system is process driven, without presupposing the existence of a construction set to use. The datastructure can be interpreted in many ways to derive various phenotypes. The resulting structure is a by-product of the cellular activity during development and in response to the environment. As such the resulting structures have much in common with living organisms which are also the emergent result or by-product of local cellular activity. Primordial Architectural Soups To conclude, Frazer presents some of the most recent work done, evolving fundamental structures using limited raw materials, an initial seed and massive feedback. Frazer proposes to go further and do away with the need for initial seed and start with a primordial soup of basic architectural concepts. The research is attempting to evolve the starting conditions and evolutionary processes without any preconditions. Is there enough time to evolve a complex system from the basic building blocks which Frazer proposes? The computational complexity of the task being embarked upon is not discussed. There is an implicit assumption that the "superb tactics" of natural selection are enough to cut through the complexity of the task. However, Kauffman has shown how self-organisation plays a major role in the early development of replicating systems which we may call alive. Natural selection requires a solid basis upon which it can act. Is the primordial soup which Frazer proposes of the correct constitution to support self-organisation? Kauffman suggests that one of the most important attributes of a primordial soup to be capable of self-organisation is the need for a complex network of catalysts and the controlling mechanisms to stop the reactions from going supracritical. Can such a network be provided of primitive architectural concepts? What does it mean to have a catalyst in this domain? Conclusion Frazer shows some interesting work both in the areas of evolutionary design and self-organising systems. It is obvious from his work that he sympathizes with the opinions put forward by Kauffman that the order found in living organisms comes from both external evolutionary pressure and internal self-organisation. His final remarks underly this by paraphrasing the words of Kauffman, that life is always to found on the edge of chaos. By the "edge of chaos" Kauffman is referring to the area within the ordered regime of a system close to the "phase transition" to chaotic behaviour. Unfortunately, Frazer does not demonstrate that the systems he has presented have the necessary qualities to derive useful order at the edge of chaos. He does not demonstrate, as Kauffman does repeatedly, that there exists a "phase transition" between ordered and chaotic regimes of his systems. He also does not make any studies of the relationship of useful forms generated by his work to phase transition regions of his systems should they exist. If we are to find an organic architecture, in more than name alone, it is surely to reside close to the phase transition of the construction system of which is it built. Only there, if we are to believe Kauffman, are we to find useful order together with environmentally sensitive and thermodynamically open systems which can approach the utility of living organisms.
series other
type normal paper
last changed 2004/05/22 14:12

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 19HOMELOGIN (you are user _anon_409612 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002