Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 394

Reformat results as: short short into frame detailed detailed into frame

_id	cbe2
authors	Fenves, S., Rivard, H., Gomez, N. and Chiou S.
year	1995
title	Conceptual Structural Design in SEED
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 179-186
summary	Although there are many computer-based tools for analyzing structures whose geometry, topology, and member properties have already been determined, there are very few general-purpose tools to assiststructural designers in synthesizing structural configurations to be subsequently sized, analyzed, and detailed. The comceptual-structural-design submodule of the Software Environment to Support the EarlyPhases in Building Design (SEED-Config) is intended to fill this void. The process starts with a geometric model of the building's massing, a set of functional requirements to be satisfied, and a toolkit oftechnologies capable of generating potential structural system and subsystem alternatives. Structural alternatives can be rapidly generated under designer control to the level of detail desired and evaluated against arange of criteria. Provisions are made to store design cases as well as to retrieve and adapt these to meet new requirements.
series	journal paper
last changed	2003/05/15 21:45

_id	4688
authors	Woodbury, Robert and Chang, Teng-Wen
year	1995
title	Building Enclosures using SEED-Config
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 49-54
summary	We describe enclosure design for SEED-Config using an example from "Architectural Details for Insulated Buildings" (Brand 90). We develop enclosures for insulated buildings in terms of the functional units that specify them, the technologies that implement them and the design units that describe them. Brand gives details in eight series (A-H); in each series he describes a specific detailing system. We base our exposition on series A to E: these share the property of the wall fitting partially under the roof and floor slabs. In series F and G the wall stands clear of the slabs and this would require a different approach to detailing from a very high level. Series H is a compendium of special cases that we do not discuss here at all. We conclude with a discussion of what our enclosure design example implies for the representation and computational engine of SEED-Config. We chose insulated enclosures as our example for a specific reason: Brandís treatment of them is proximate to the fundamental approach we take in SEED. Brand wrote in clear, rule-like terms that progress from the abstract to the specific. He explicitly links each part of every detail to the function it fulfills.
keywords	Generative Systems, Building Enclosures, CAD, SEED, Representation, Search
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	d6d8
authors	Flemming, Ulrich and Woodbury, Robert
year	1995
title	Software Environment to Support Early Phases in Building Design (SEED): Overview
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 147-152
summary	This paper describes the overall goals of SEED, the approach taken by its developers to achieve these goals, and the subprojects that comprise the entire project. SEED aims at providing computational support forthe early design phase in all aspects that can benefit from such support. It addresses specifically architectural programming, schematic layout design, and the generation of a fully three-dimensional configuration ofphysical building components like structure and enclosure. These tasks are handled by three individual modules, SEED-Pro, SEED-Layout, and SEED-Config. A standards processor is under development tosupport standards and code checking in any module, as is an object database to store and retrieve different design versions, alternatives, and past designs that can be reused and adapted in different contexts(case-based design). Usability issues, especially the interfaces to the modules, receive special attention. Subsequent papers elaborate on these efforts in greater detail. The present paper provides an overview of theentire project and introduces shared concepts presumed known in subsequent papers.
series	journal paper
email
last changed	2003/05/15 21:45

_id	fa87
authors	Kurmann, David
year	1995
title	Sculptor - A Tool for Intuitive Architectural Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 323-330
summary	To manage the complexity in three-dimensional modelling and design in architecture, new approaches and methods are needed in computer based design tools. This paper identifies key factors in designing with computers and presents a computer program called 'Sculptor' for intuitive and direct virtual modelling in architecture. The program focuses on new methods for design in the early stages such as conceptual and abstract designs for massing studies.
keywords	Architectural Design., User Interface, Virtual Reality, Distributed Modelling, Intelligent Agents
series	CAAD Futures
last changed	1999/08/03 17:16

_id	8a8a
authors	Akin, Ö., Sen, R., Donia,M. and Zhang, Y.
year	1995
title	SEED-Pro: Computer-Assisted Architectural Programming in SEED
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 153-161
summary	Computer-assisted architectural programming is in its infancy. What there is in terms of architectural programming theory often differs from practice. In the first half of this paper we define relevant terms, provide abrief review of the state of the art, and draw attention to the primacy of architectural programming in design. SEED-Pro is introduced as an intelligent assistant providing structure to the normally open-endedactivities of design. This includes the creation of an architectural program from scratch. In the second, more technical, part of the paper we emphasize three specific topics. The design problem specificationfunctionality is described. The generation and evaluation of the emerging architectural program is discussed. An approach to the decomposition of the architectural program into alternative hierarchies is provided.The paper concludes with a discussion of what is and remains to be accomplished.
series	journal paper
email
last changed	2003/05/15 21:27

_id	d637
authors	Flemming, Ulrich and Sheng-Fen , Chien
year	1995
title	Schematic Layout Design in SEED Environment
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 162-169
summary	This paper describes SEED-Layout, a module of SEED that supports the generation of schematic layouts of the functional units specified in an architectural program. SEED-Layout provides capabilities that allowdesigners to generate and evaluate rapidly different layout alternatives and versions; to explore the trade-offs involved; and to engage generally in an iterative, highly explorative design process. The resulting"design space" is complex, and the paper describes current efforts to provide designers with intelligent "navigation" aids that encourage them to explore interesting portions of this space without "getting lost."The paper concludes with a brief description of the current implementation and directions for future work.
series	journal paper
email
last changed	2003/05/15 21:45

_id	2068
authors	Frazer, John
year	1995
title	AN EVOLUTIONARY ARCHITECTURE
source	London: Architectural Association
summary	In "An Evolutionary Architecture", John Frazer presents an overview of his work for the past 30 years. Attempting to develop a theoretical basis for architecture using analogies with nature's processes of evolution and morphogenesis. Frazer's vision of the future of architecture is to construct organic buildings. Thermodynamically open systems which are more environmentally aware and sustainable physically, sociologically and economically. The range of topics which Frazer discusses is a good illustration of the breadth and depth of the evolutionary design problem. Environmental Modelling One of the first topics dealt with is the importance of environmental modelling within the design process. Frazer shows how environmental modelling is often misused or misinterpreted by architects with particular reference to solar modelling. From the discussion given it would seem that simplifications of the environmental models is the prime culprit resulting in misinterpretation and misuse. The simplifications are understandable given the amount of information needed for accurate modelling. By simplifying the model of the environmental conditions the architect is able to make informed judgments within reasonable amounts of time and effort. Unfortunately the simplications result in errors which compound and cause the resulting structures to fall short of their anticipated performance. Frazer obviously believes that the computer can be a great aid in the harnessing of environmental modelling data, providing that the same simplifying assumptions are not made and that better models and interfaces are possible. Physical Modelling Physical modelling has played an important role in Frazer's research. Leading to the construction of several novel machine readable interactive models, ranging from lego-like building blocks to beermat cellular automata and wall partitioning systems. Ultimately this line of research has led to the Universal Constructor and the Universal Interactor. The Universal Constructor The Universal Constructor features on the cover of the book. It consists of a base plug-board, called the "landscape", on top of which "smart" blocks, or cells, can be stacked vertically. The cells are individually identified and can communicate with neighbours above and below. Cells communicate with users through a bank of LEDs displaying the current state of the cell. The whole structure is machine readable and so can be interpreted by a computer. The computer can interpret the states of the cells as either colour or geometrical transformations allowing a wide range of possible interpretations. The user interacts with the computer display through direct manipulation of the cells. The computer can communicate and even direct the actions of the user through feedback with the cells to display various states. The direct manipulation of the cells encourages experimentation by the user and demonstrates basic concepts of the system. The Universal Interactor The Universal Interactor is a whole series of experimental projects investigating novel input and output devices. All of the devices speak a common binary language and so can communicate through a mediating central hub. The result is that input, from say a body-suit, can be used to drive the out of a sound system or vice versa. The Universal Interactor opens up many possibilities for expression when using a CAD system that may at first seem very strange.However, some of these feedback systems may prove superior in the hands of skilled technicians than more standard devices. Imagine how a musician might be able to devise structures by playing melodies which express the character. Of course the interpretation of input in this form poses a difficult problem which will take a great deal of research to achieve. The Universal Interactor has been used to provide environmental feedback to affect the development of evolving genetic codes. The feedback given by the Universal Interactor has been used to guide selection of individuals from a population. Adaptive Computing Frazer completes his introduction to the range of tools used in his research by giving a brief tour of adaptive computing techniques. Covering topics including cellular automata, genetic algorithms, classifier systems and artificial evolution. Cellular Automata As previously mentioned Frazer has done some work using cellular automata in both physical and simulated environments. Frazer discusses how surprisingly complex behaviour can result from the simple local rules executed by cellular automata. Cellular automata are also capable of computation, in fact able to perform any computation possible by a finite state machine. Note that this does not mean that cellular automata are capable of any general computation as this would require the construction of a Turing machine which is beyond the capabilities of a finite state machine. Genetic Algorithms Genetic algorithms were first presented by Holland and since have become a important tool for many researchers in various areas.Originally developed for problem-solving and optimization problems with clearly stated criteria and goals. Frazer fails to mention one of the most important differences between genetic algorithms and other adaptive problem-solving techniques, ie. neural networks. Genetic algorithms have the advantage that criteria can be clearly stated and controlled within the fitness function. The learning by example which neural networks rely upon does not afford this level of control over what is to be learned. Classifier Systems Holland went on to develop genetic algorithms into classifier systems. Classifier systems are more focussed upon the problem of learning appropriate responses to stimuli, than searching for solutions to problems. Classifier systems receive information from the environment and respond according to rules, or classifiers. Successful classifiers are rewarded, creating a reinforcement learning environment. Obviously, the mapping between classifier systems and the cybernetic view of organisms sensing, processing and responding to environmental stimuli is strong. It would seem that a central process similar to a classifier system would be appropriate at the core of an organic building. Learning appropriate responses to environmental conditions over time. Artificial Evolution Artificial evolution traces it's roots back to the Biomorph program which was described by Dawkins in his book "The Blind Watchmaker". Essentially, artificial evolution requires that a user supplements the standard fitness function in genetic algorithms to guide evolution. The user may provide selection pressures which are unquantifiable in a stated problem and thus provide a means for dealing ill-defined criteria. Frazer notes that solving problems with ill-defined criteria using artificial evolution seriously limits the scope of problems that can be tackled. The reliance upon user interaction in artificial evolution reduces the practical size of populations and the duration of evolutionary runs. Coding Schemes Frazer goes on to discuss the encoding of architectural designs and their subsequent evolution. Introducing two major systems, the Reptile system and the Universal State Space Modeller. Blueprint vs. Recipe Frazer points out the inadequacies of using standard "blueprint" design techniques in developing organic structures. Using a "recipe" to describe the process of constructing a building is presented as an alternative. Recipes for construction are discussed with reference to the analogous process description given by DNA to construct an organism. The Reptile System The Reptile System is an ingenious construction set capable of producing a wide range of structures using just two simple components. Frazer saw the advantages of this system for rule-based and evolutionary systems in the compactness of structure descriptions. Compactness was essential for the early computational work when computer memory and storage space was scarce. However, compact representations such as those described form very rugged fitness landscapes which are not well suited to evolutionary search techniques. Structures are created from an initial "seed" or minimal construction, for example a compact spherical structure. The seed is then manipulated using a series of processes or transformations, for example stretching, shearing or bending. The structure would grow according to the transformations applied to it. Obviously, the transformations could be a predetermined sequence of actions which would always yield the same final structure given the same initial seed. Alternatively, the series of transformations applied could be environmentally sensitive resulting in forms which were also sensitive to their location. The idea of taking a geometrical form as a seed and transforming it using a series of processes to create complex structures is similar in many ways to the early work of Latham creating large morphological charts. Latham went on to develop his ideas into the "Mutator" system which he used to create organic artworks. Generalising the Reptile System Frazer has proposed a generalised version of the Reptile System to tackle more realistic building problems. Generating the seed or minimal configuration from design requirements automatically. From this starting point (or set of starting points) solutions could be evolved using artificial evolution. Quantifiable and specific aspects of the design brief define the formal criteria which are used as a standard fitness function. Non-quantifiable criteria, including aesthetic judgments, are evaluated by the user. The proposed system would be able to learn successful strategies for satisfying both formal and user criteria. In doing so the system would become a personalised tool of the designer. A personal assistant which would be able to anticipate aesthetic judgements and other criteria by employing previously successful strategies. Ultimately, this is a similar concept to Negroponte's "Architecture Machine" which he proposed would be computer system so personalised so as to be almost unusable by other people. The Universal State Space Modeller The Universal State Space Modeller is the basis of Frazer's current work. It is a system which can be used to model any structure, hence the universal claim in it's title. The datastructure underlying the modeller is a state space of scaleless logical points, called motes. Motes are arranged in a close-packing sphere arrangement, which makes each one equidistant from it's twelve neighbours. Any point can be broken down into a self-similar tetrahedral structure of logical points. Giving the state space a fractal nature which allows modelling at many different levels at once. Each mote can be thought of as analogous to a cell in a biological organism. Every mote carries a copy of the architectural genetic code in the same way that each cell within a organism carries a copy of it's DNA. The genetic code of a mote is stored as a sequence of binary "morons" which are grouped together into spatial configurations which are interpreted as the state of the mote. The developmental process begins with a seed. The seed develops through cellular duplication according to the rules of the genetic code. In the beginning the seed develops mainly in response to the internal genetic code, but as the development progresses the environment plays a greater role. Cells communicate by passing messages to their immediate twelve neighbours. However, it can send messages directed at remote cells, without knowledge of it's spatial relationship. During the development cells take on specialised functions, including environmental sensors or producers of raw materials. The resulting system is process driven, without presupposing the existence of a construction set to use. The datastructure can be interpreted in many ways to derive various phenotypes. The resulting structure is a by-product of the cellular activity during development and in response to the environment. As such the resulting structures have much in common with living organisms which are also the emergent result or by-product of local cellular activity. Primordial Architectural Soups To conclude, Frazer presents some of the most recent work done, evolving fundamental structures using limited raw materials, an initial seed and massive feedback. Frazer proposes to go further and do away with the need for initial seed and start with a primordial soup of basic architectural concepts. The research is attempting to evolve the starting conditions and evolutionary processes without any preconditions. Is there enough time to evolve a complex system from the basic building blocks which Frazer proposes? The computational complexity of the task being embarked upon is not discussed. There is an implicit assumption that the "superb tactics" of natural selection are enough to cut through the complexity of the task. However, Kauffman has shown how self-organisation plays a major role in the early development of replicating systems which we may call alive. Natural selection requires a solid basis upon which it can act. Is the primordial soup which Frazer proposes of the correct constitution to support self-organisation? Kauffman suggests that one of the most important attributes of a primordial soup to be capable of self-organisation is the need for a complex network of catalysts and the controlling mechanisms to stop the reactions from going supracritical. Can such a network be provided of primitive architectural concepts? What does it mean to have a catalyst in this domain? Conclusion Frazer shows some interesting work both in the areas of evolutionary design and self-organising systems. It is obvious from his work that he sympathizes with the opinions put forward by Kauffman that the order found in living organisms comes from both external evolutionary pressure and internal self-organisation. His final remarks underly this by paraphrasing the words of Kauffman, that life is always to found on the edge of chaos. By the "edge of chaos" Kauffman is referring to the area within the ordered regime of a system close to the "phase transition" to chaotic behaviour. Unfortunately, Frazer does not demonstrate that the systems he has presented have the necessary qualities to derive useful order at the edge of chaos. He does not demonstrate, as Kauffman does repeatedly, that there exists a "phase transition" between ordered and chaotic regimes of his systems. He also does not make any studies of the relationship of useful forms generated by his work to phase transition regions of his systems should they exist. If we are to find an organic architecture, in more than name alone, it is surely to reside close to the phase transition of the construction system of which is it built. Only there, if we are to believe Kauffman, are we to find useful order together with environmentally sensitive and thermodynamically open systems which can approach the utility of living organisms.
series	other
type	normal paper
last changed	2004/05/22 14:12

_id	02f7
authors	Liebich, Thomas and Kim, Inhan
year	1995
title	ID'EST: An Integrated Modelling Framework for Management of Architectural Data
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 377-387
summary	An Integrated Design Environment, IDE, facilitates cooperation between different disciplines. The paper investigates the data modelling framework, distinguishes between homogeneous and heterogeneous model worlds, discusses the formal mapping mechanisms available to establish a heterogeneous model world, and introduces a way to incorporate CAD systems into IDE A prototype IDE has been developed to prove these methods. The ID'EST prototype comprises its own core data model, different schemas to cope with several design views, and interfaces to incorporate external CAD systems. A prototype architectural data model has been defined, that includes core data models and aspect models for enclosure system and spatial system. Conventional CAD systems can be integrated into ID'EST, if they are able to map data from the aspect models into their own data structure, and vice versa, on a high semantic level. The inherent methods of classifying data in CAD, layers, macros and attached attributes, have been used to retrieve product data from CAD data files. The usability of conventional CAD systems as data instantiation tools for IDE has been proved and a path has been shown, by which existing tools can be integrated into new technology solutions.
keywords	Product Modelling, Formal Mapping Specification, Computer-Aided Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.1995.139
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	6cb2
authors	Af Klercker, Jonas
year	1995
title	Architects Early Sketching on Computer Using Multimedia
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 247-256
doi	https://doi.org/10.52842/conf.ecaade.1995.247
summary	This paper presents a development work which aims at practical applications of ideas built on experiences in practise and education and the theoretical development in the BAS.CAAD project. The important difference between BAS.CAAD and CAD programs of today is the possibility to handle user organisation, building design and site in the same program. This means that design today has to be done in at least 3 separate programs with different ways of defining objects. It is then a computer technical problem to mix and study the relations between objects of separate origin. In a recent project our method to overcome this difficulty in CAAD computing was using a Multimedia program making visual simulations to analyse consequences of form etc. As the process went on and forms where more concrete it was possible to make simulations worth showing and discussing to involve colleagues, clients and users.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_51.htm
last changed	2022/06/07 07:54

_id	4bf6
authors	Akin, O. and Lin, C.
year	1995
title	Design Protocol data and novel design decisions
source	Design Studies, 16 (#2, April), 211-236
summary	This work is a part of The Delft Protocols Workshop which is an international gathering of experts on design research. The objective is to study the behaviours of designers using techniques of cognitive psychology in general and protocol analysis in particular. The purpose of this paper is to explore the relationship between visual-graphic data processing and novel design ideas. Several analyses dealing with verbal-conceptual and visual-graphic data have been conducted; and the relationships between design activities and design decisions have been explored. The findings indicate that phases of the design process and the activities correlate with key design decisions.
series	journal paper
email
last changed	2003/04/23 15:14

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
doi	https://doi.org/10.52842/conf.ecaade.1995.003
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	1a52
authors	Amor, R., Augenbroe, G., Hosking, J., Rombouts and W., Grundy, J.
year	1995
title	Directions in modelling environments
source	Automation in Construction 4 (3) (1995) pp. 173-187
summary	Schema definition is a vital component in the computerised A/E/C projects. existing tools to manage this task are limited both in terms of the scope Of problems they can tackle and their integration with each other. This paper describes a global modellling and development environment for large modelling projects. This environment provides a total solution from initial design of schemas to validation, manipulation arid navigation through final models. A major benefit of the described system is the ability to provide multiple views of evolving schemas (or models) in both graphical and textual forms This allows modellers to visualise their schemas and instance models either textually or graphically as desired. The system automatically maintains the Conisistency of the informalion in these views even when modifications are made in other views. Simple and intuitive view navigation methods allow required information to he rapidly accessed. The environment supports strict checking of model instances and schemas in one of the major ISO-standardised modelling languages no used in product data technology. Ill this paper we show how such a modelling environment has been constructed for evaluation in the JOULE founded COMBINE project.
keywords	Modelling Environment; Consistency; Multiple Views: Views; Building Models; Information Management; Integrated System; Product Modelling
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:33

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	623e
authors	Arumi-Noe, Francisco
year	1995
title	Algorithm For The Automatic Design Of A Shading Device
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 233-242
doi	https://doi.org/10.52842/conf.acadia.1995.233
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
keywords	Energy Conscious Design, Green Architecture, Sustainable Architecture, Solar Design, Computer Aided Design
series	ACADIA
last changed	2022/06/07 07:54

_id	b914
authors	Asanowicz, Aleksander and Asanowicz, Katarzyna
year	1995
title	Designing, CAD and CAD
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 181-192
summary	The general aim of our discussion is to analyze what has been changed in design process according to introducing the computers technology. For the better understanding of the design process evolution, we should precisely define start point - the traditional design process.Let's treat it as an iteration game between a designer and user. If we assume that the designing base is a reductive strategy, we can define six stages of it: 1.) To define a need; 2.) To formulate a task; 3.) To synthesize a design proposals; 4.) To analyze and optimize; 5.) To make a presentation. // The last stage - the presentation of designing proposals is the main factor of using computers in design process and creating definition of CAD as Computer Aided Drafting. According to this interpretation CAD has included four groups of activities: A.) Geometrical modelling; B.) Analysis; C.) Revision and estimation of design proposals; D.) Technical drawing preparing. // Unfortunately it has no connections with another meaning of CAD - Computer Aided Design because concerns every stage of design process except of creation of architectural form. On the other hand, computer enables us to improve the design process by permanent perception of designing forms and dynamic control over the transforming structure. Nowadays thanks to full-function sketching workstation and software like Fractal Design Painter a computer can be useful from the moment when the first line is drawing. It is possible, that the new generation of CAD software - CAD with Personality which connects computer models with picture transformation will enable CAD to be Computer Aided Design.
series	plCAD
email
last changed	2000/01/24 10:08

_id	2a49
authors	Asanowicz, Aleksander
year	1995
title	Multimedia Versus Ugliness of the City
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 389-394
doi	https://doi.org/10.52842/conf.ecaade.1995.389
summary	This paper presents a method of using multimedia techniques in order to solve problems of visual pollution of city environment. It is our observation that human - inducted degradation of city environmental results not only from neglect and vandalism but also from well - intentioned but inappropriate preservation actions by uninformed designers and local administrations. Very often, a local municipality administration permit to erect an ugly, bad-fitting surroundings houses. It is usually connected with lack of informations about certain areas of a city, its features, characteristic and about present and earlier buildings. Therefore there was an experiment - a complex programme aiding the decision process as a part of the CAMUS system (Computer Aided Management of Urban Structure) which is created at Faculty of Architecture TUB. One of the integral parts of it is a block, which has been called "How would it be like to be nice around". One of the basic elements of that system is a town data base consisting of the independent knowledge - based systems, working together in a distributed computing environment. City administration will have access to each information from multimedia data-base. Multimedia is also having and impact on the effectiveness of decision process in urban planning and in our fight with ugliness of the city.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_46.htm
last changed	2022/06/07 07:54

_id	00ae
id	00ae
authors	Ataman, Osman
year	1995
title	Building A Computer Aid for Teaching Architectural Design Concepts
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 187-208
doi	https://doi.org/10.52842/conf.acadia.1995.187
summary	Building an aid for teaching architectural design concepts is the process of elaborating topics, defining problems and suggesting to the students strategies for solving those problems. I believe students in Environment and Behavior (E&B) courses at Georgia Tech can benefit greatly from a computer based educational tool designed to provide them with experiences they currently do not possess. In particular, little time in the course (outside lectures) is devoted to applying concepts taught in the course to the studio projects. The tool I am proposing provides students with an opportunity to critique architectural environments (both simple examples and previous projects) using a single concept, "affordances". This paper describes my current progress toward realizing the goal of designing a tool that will help the students to understand particular concepts and to integrate them into their designs. It is my claim that an integrative and interactive approach - creating a learning environment and making both the students and the environment mutually supportive- is fundamentally more powerful than traditional educational methods.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
doi	https://doi.org/10.52842/conf.acadia.2000.163
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: