Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 384

Reformat results as: short short into frame detailed detailed into frame

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	2068
authors	Frazer, John
year	1995
title	AN EVOLUTIONARY ARCHITECTURE
source	London: Architectural Association
summary	In "An Evolutionary Architecture", John Frazer presents an overview of his work for the past 30 years. Attempting to develop a theoretical basis for architecture using analogies with nature's processes of evolution and morphogenesis. Frazer's vision of the future of architecture is to construct organic buildings. Thermodynamically open systems which are more environmentally aware and sustainable physically, sociologically and economically. The range of topics which Frazer discusses is a good illustration of the breadth and depth of the evolutionary design problem. Environmental Modelling One of the first topics dealt with is the importance of environmental modelling within the design process. Frazer shows how environmental modelling is often misused or misinterpreted by architects with particular reference to solar modelling. From the discussion given it would seem that simplifications of the environmental models is the prime culprit resulting in misinterpretation and misuse. The simplifications are understandable given the amount of information needed for accurate modelling. By simplifying the model of the environmental conditions the architect is able to make informed judgments within reasonable amounts of time and effort. Unfortunately the simplications result in errors which compound and cause the resulting structures to fall short of their anticipated performance. Frazer obviously believes that the computer can be a great aid in the harnessing of environmental modelling data, providing that the same simplifying assumptions are not made and that better models and interfaces are possible. Physical Modelling Physical modelling has played an important role in Frazer's research. Leading to the construction of several novel machine readable interactive models, ranging from lego-like building blocks to beermat cellular automata and wall partitioning systems. Ultimately this line of research has led to the Universal Constructor and the Universal Interactor. The Universal Constructor The Universal Constructor features on the cover of the book. It consists of a base plug-board, called the "landscape", on top of which "smart" blocks, or cells, can be stacked vertically. The cells are individually identified and can communicate with neighbours above and below. Cells communicate with users through a bank of LEDs displaying the current state of the cell. The whole structure is machine readable and so can be interpreted by a computer. The computer can interpret the states of the cells as either colour or geometrical transformations allowing a wide range of possible interpretations. The user interacts with the computer display through direct manipulation of the cells. The computer can communicate and even direct the actions of the user through feedback with the cells to display various states. The direct manipulation of the cells encourages experimentation by the user and demonstrates basic concepts of the system. The Universal Interactor The Universal Interactor is a whole series of experimental projects investigating novel input and output devices. All of the devices speak a common binary language and so can communicate through a mediating central hub. The result is that input, from say a body-suit, can be used to drive the out of a sound system or vice versa. The Universal Interactor opens up many possibilities for expression when using a CAD system that may at first seem very strange.However, some of these feedback systems may prove superior in the hands of skilled technicians than more standard devices. Imagine how a musician might be able to devise structures by playing melodies which express the character. Of course the interpretation of input in this form poses a difficult problem which will take a great deal of research to achieve. The Universal Interactor has been used to provide environmental feedback to affect the development of evolving genetic codes. The feedback given by the Universal Interactor has been used to guide selection of individuals from a population. Adaptive Computing Frazer completes his introduction to the range of tools used in his research by giving a brief tour of adaptive computing techniques. Covering topics including cellular automata, genetic algorithms, classifier systems and artificial evolution. Cellular Automata As previously mentioned Frazer has done some work using cellular automata in both physical and simulated environments. Frazer discusses how surprisingly complex behaviour can result from the simple local rules executed by cellular automata. Cellular automata are also capable of computation, in fact able to perform any computation possible by a finite state machine. Note that this does not mean that cellular automata are capable of any general computation as this would require the construction of a Turing machine which is beyond the capabilities of a finite state machine. Genetic Algorithms Genetic algorithms were first presented by Holland and since have become a important tool for many researchers in various areas.Originally developed for problem-solving and optimization problems with clearly stated criteria and goals. Frazer fails to mention one of the most important differences between genetic algorithms and other adaptive problem-solving techniques, ie. neural networks. Genetic algorithms have the advantage that criteria can be clearly stated and controlled within the fitness function. The learning by example which neural networks rely upon does not afford this level of control over what is to be learned. Classifier Systems Holland went on to develop genetic algorithms into classifier systems. Classifier systems are more focussed upon the problem of learning appropriate responses to stimuli, than searching for solutions to problems. Classifier systems receive information from the environment and respond according to rules, or classifiers. Successful classifiers are rewarded, creating a reinforcement learning environment. Obviously, the mapping between classifier systems and the cybernetic view of organisms sensing, processing and responding to environmental stimuli is strong. It would seem that a central process similar to a classifier system would be appropriate at the core of an organic building. Learning appropriate responses to environmental conditions over time. Artificial Evolution Artificial evolution traces it's roots back to the Biomorph program which was described by Dawkins in his book "The Blind Watchmaker". Essentially, artificial evolution requires that a user supplements the standard fitness function in genetic algorithms to guide evolution. The user may provide selection pressures which are unquantifiable in a stated problem and thus provide a means for dealing ill-defined criteria. Frazer notes that solving problems with ill-defined criteria using artificial evolution seriously limits the scope of problems that can be tackled. The reliance upon user interaction in artificial evolution reduces the practical size of populations and the duration of evolutionary runs. Coding Schemes Frazer goes on to discuss the encoding of architectural designs and their subsequent evolution. Introducing two major systems, the Reptile system and the Universal State Space Modeller. Blueprint vs. Recipe Frazer points out the inadequacies of using standard "blueprint" design techniques in developing organic structures. Using a "recipe" to describe the process of constructing a building is presented as an alternative. Recipes for construction are discussed with reference to the analogous process description given by DNA to construct an organism. The Reptile System The Reptile System is an ingenious construction set capable of producing a wide range of structures using just two simple components. Frazer saw the advantages of this system for rule-based and evolutionary systems in the compactness of structure descriptions. Compactness was essential for the early computational work when computer memory and storage space was scarce. However, compact representations such as those described form very rugged fitness landscapes which are not well suited to evolutionary search techniques. Structures are created from an initial "seed" or minimal construction, for example a compact spherical structure. The seed is then manipulated using a series of processes or transformations, for example stretching, shearing or bending. The structure would grow according to the transformations applied to it. Obviously, the transformations could be a predetermined sequence of actions which would always yield the same final structure given the same initial seed. Alternatively, the series of transformations applied could be environmentally sensitive resulting in forms which were also sensitive to their location. The idea of taking a geometrical form as a seed and transforming it using a series of processes to create complex structures is similar in many ways to the early work of Latham creating large morphological charts. Latham went on to develop his ideas into the "Mutator" system which he used to create organic artworks. Generalising the Reptile System Frazer has proposed a generalised version of the Reptile System to tackle more realistic building problems. Generating the seed or minimal configuration from design requirements automatically. From this starting point (or set of starting points) solutions could be evolved using artificial evolution. Quantifiable and specific aspects of the design brief define the formal criteria which are used as a standard fitness function. Non-quantifiable criteria, including aesthetic judgments, are evaluated by the user. The proposed system would be able to learn successful strategies for satisfying both formal and user criteria. In doing so the system would become a personalised tool of the designer. A personal assistant which would be able to anticipate aesthetic judgements and other criteria by employing previously successful strategies. Ultimately, this is a similar concept to Negroponte's "Architecture Machine" which he proposed would be computer system so personalised so as to be almost unusable by other people. The Universal State Space Modeller The Universal State Space Modeller is the basis of Frazer's current work. It is a system which can be used to model any structure, hence the universal claim in it's title. The datastructure underlying the modeller is a state space of scaleless logical points, called motes. Motes are arranged in a close-packing sphere arrangement, which makes each one equidistant from it's twelve neighbours. Any point can be broken down into a self-similar tetrahedral structure of logical points. Giving the state space a fractal nature which allows modelling at many different levels at once. Each mote can be thought of as analogous to a cell in a biological organism. Every mote carries a copy of the architectural genetic code in the same way that each cell within a organism carries a copy of it's DNA. The genetic code of a mote is stored as a sequence of binary "morons" which are grouped together into spatial configurations which are interpreted as the state of the mote. The developmental process begins with a seed. The seed develops through cellular duplication according to the rules of the genetic code. In the beginning the seed develops mainly in response to the internal genetic code, but as the development progresses the environment plays a greater role. Cells communicate by passing messages to their immediate twelve neighbours. However, it can send messages directed at remote cells, without knowledge of it's spatial relationship. During the development cells take on specialised functions, including environmental sensors or producers of raw materials. The resulting system is process driven, without presupposing the existence of a construction set to use. The datastructure can be interpreted in many ways to derive various phenotypes. The resulting structure is a by-product of the cellular activity during development and in response to the environment. As such the resulting structures have much in common with living organisms which are also the emergent result or by-product of local cellular activity. Primordial Architectural Soups To conclude, Frazer presents some of the most recent work done, evolving fundamental structures using limited raw materials, an initial seed and massive feedback. Frazer proposes to go further and do away with the need for initial seed and start with a primordial soup of basic architectural concepts. The research is attempting to evolve the starting conditions and evolutionary processes without any preconditions. Is there enough time to evolve a complex system from the basic building blocks which Frazer proposes? The computational complexity of the task being embarked upon is not discussed. There is an implicit assumption that the "superb tactics" of natural selection are enough to cut through the complexity of the task. However, Kauffman has shown how self-organisation plays a major role in the early development of replicating systems which we may call alive. Natural selection requires a solid basis upon which it can act. Is the primordial soup which Frazer proposes of the correct constitution to support self-organisation? Kauffman suggests that one of the most important attributes of a primordial soup to be capable of self-organisation is the need for a complex network of catalysts and the controlling mechanisms to stop the reactions from going supracritical. Can such a network be provided of primitive architectural concepts? What does it mean to have a catalyst in this domain? Conclusion Frazer shows some interesting work both in the areas of evolutionary design and self-organising systems. It is obvious from his work that he sympathizes with the opinions put forward by Kauffman that the order found in living organisms comes from both external evolutionary pressure and internal self-organisation. His final remarks underly this by paraphrasing the words of Kauffman, that life is always to found on the edge of chaos. By the "edge of chaos" Kauffman is referring to the area within the ordered regime of a system close to the "phase transition" to chaotic behaviour. Unfortunately, Frazer does not demonstrate that the systems he has presented have the necessary qualities to derive useful order at the edge of chaos. He does not demonstrate, as Kauffman does repeatedly, that there exists a "phase transition" between ordered and chaotic regimes of his systems. He also does not make any studies of the relationship of useful forms generated by his work to phase transition regions of his systems should they exist. If we are to find an organic architecture, in more than name alone, it is surely to reside close to the phase transition of the construction system of which is it built. Only there, if we are to believe Kauffman, are we to find useful order together with environmentally sensitive and thermodynamically open systems which can approach the utility of living organisms.
series	other
type	normal paper
last changed	2004/05/22 14:12

_id	e613
authors	Kardos, Peter
year	1995
title	The Role of Spatial Experience Anticipation in Architectural Education and Urban Design
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	Space and its matter substance are the main subjects of urban design, in which an architect, by setting in order the functional-operating relationships and the matter-dimensional manifestations of the formed structure, operates with the aim to achieve general harmony, functional and expressive complexity. Demanding a process, which coordinates relationships in all space dimensions, requires flexible openness of the work documentation during the conception period. Experience proved that such requirements are satisfactorily accomplished by the method of space-modeling, where the creative process happens on the working model. The reality, though diminished in a simplified form, is in advance, i.e. in an anticipated way. By adapted periscope the endoscopic method develops the method of spatial modeling in new media dimension and enriches it towards creativeness by enabling the simulated space to be percepted on a traditional artificial model in natural horizon of a man. To secure the anticipation by visual simulation of spatial experience on the monitor in a trustworthy manner with respect to real reality, according to relevant aspects of the conception, the visual simulation must respect the rules of sensory perception of a man in real environment. From the procedural point of view of perception the most significant fact for the psyche is the sequence dynamics of the subject and the movement of the perceiver in space. This means that in the mind of the perceiver the most emotionally reflected is the dynamic spatial experience. Despite the known disadvantages and technical circumstances of model building the method of spatial endoscopy proved itself in didactics, mainly in the approval phase of the aims of urbanistic composition and shaping of an urban space, especially because it enables to carry out by interactive means the sequence research and evaluation of the simulated space on the working model, directly in the studio or in laboratory conditions with relatively low expenses, and with the possibility of immediate correction and subsequent evaluation of the effect. Similarly, its audiovisually elaborated media outputs may simultaneously complete the identical model presentation within evaluating and approving continuations in professional gremiums or in making the results of urban and architectonic solutions popular in the layman public. According to an informal public opinion research on the effect of both CAD and endoscopy simulations, the later one is more popular. Is is, however, a matter of subjective evaluation and experience or a matter of commercial application.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	maver_075
id	maver_075
authors	Chen, Y.Z. and Maver, T.W.
year	1995
title	Some Experiments on Implementing Collaborative Building Design Environments
source	Building Simulation 95 Conference (Ed: J Mitchell et al) Madison, USA
summary	A collaborative building design environment has been proposed to integrate together both the heterogeneous applications and the dispersed project participants. Based on the functional requirements identified, the conventional building product models have been extended to incorporate high-level concepts such as activity and organisation, which are essential for coordination, and a generic human- human interaction model has been developed, which could not only make the building domain models interaction-aware, but also serve as a base model for developing general interaction utilities. Collaborative design environment prototyping has been described, covering the common project workspace, general interaction utilities and multiuser interfaces. Three distribution schemes for implementing the common project workspace within a distributed environment have also been discussed.
series	other
type	normal paper
email
last changed	2015/02/20 14:46

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
doi	https://doi.org/10.52842/conf.ecaade.1995.355
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	7555
authors	Brown, F., Cooper, G., Ford, S., Aouad, G., Brandon, P., Child, T., Kirkham, J., Oxman, R. and Young, B.
year	1995
title	An integrated approach to CAD: modelling concepts in building design and construction
source	Design Studies 16 (3) (1995) pp. 327-347
summary	The ICON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different 'perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
series	journal paper
last changed	2003/05/15 21:45

_id	940c
authors	Brown, F.E. (et. al.)
year	1995
title	An integrated approach to CAD: modelling concepts in building design and construction
source	Design Studies, vol. 16
summary	The ICON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different `perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
series	journal paper
last changed	2003/04/23 15:50

_id	6378
authors	Burry, M., Prentice, R. and Wood, P.
year	1995
title	Walking Before Running: A Prelude to Multimedia Construction Information
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 257-266
doi	https://doi.org/10.52842/conf.ecaade.1995.257
summary	An inherent problem with creating a multimedia application is generating the mass of information needed in order for it to be comprehensively useful. This is especially true when the subject is building construction for which any informative resource must cover the whole range of the material within its scope from the outset rather than merely be a sampler. Construction studies involve a large and diverse range of ´generic´ or ´model solutions´ which, in an ideal learning situation, are placed in context with historical and contemporary examples to aid a sense of critical evaluation. An obstacle, then, against creating resources dealing with detailed design is the risk that if it is not completed in its entirely there is no useful outcome. This paper also describes the problems and solutions involved in treating this material as data in a generic format so that its future usefulness is not compromised by current needs. It also outlines the programmes written to streamline an otherwise unwieldy process and deal with the inevitable non-conforming output from the participants.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_31.htm
last changed	2022/06/07 07:54

_id	ff05
authors	Butelski, Kazimierz
year	1995
title	A Brief Note on Virtual Space
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 83-92
summary	In its efforts to represent space, and then create architecture on the basis of this representation, humanity has taken three major steps. STEP 1. Representation of space in the form of a drawing or model; representations compared to the mental vision and then redrawn or remodelled, until the vision takes the shape of a finished building. This technology of design" followed different conventions, depending on the epoch. In the Middle Ages the method of approximation by triangles was introduced. The Renaissance used Projection, Elevation and Cross-Section. In order to construct a building, a flat, abstract representation is used, supplemented by a model showing spatial relations and a verbal description, impossible to convey graphically. STEP 2. Methods as in Step 1, but, beginning in the 1970s, with the use of computers, which allows also for the gradual integration of these methods in one program. Theoretically speaking, all necessary data can be now recorded, visualized, animated, etc., on a PC class computer. The design-aid software is based on the method of creating a 3D model of the whole building, and then generating the rest (projections, cross-sections) from it. STEP 3. The above step have - brought us to near- perfection in photorealistic representation of space, which remains, however only a 2D abstraction from 3D space. The next step, which is now taking place before (and in?) our very eyes, is to use systems which bring us directly into 3D space.
series	plCAD
last changed	2000/01/24 10:08

_id	aa01
authors	Butelski, Kazimierz
year	1995
title	On Similarities between the Conventions of Computer Modelling and the Creation of Architectural Form
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 71-74
doi	https://doi.org/10.52842/conf.ecaade.1995.071
summary	The following remarks relate to the creation of a geometric representation, which determines the future form of a building. I also discuss the relation between the three main conventions of computer modelling: Constructive Solid Geometry, Boundary Representation, Metagraphics and the currently design methods. For the sake of comparison, I selected three contemporary architects, Zaha Hadid, Arata Isozaki and Rob Krier represent mutually opposed, and also strongly ideological currents in today´s architecture, Arata Isozaki occupies the middle ground.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_9.htm
last changed	2022/06/07 07:54

_id	05f7
authors	Carrara, G., Confessore, G., Fioravanti, A. and Novembri, G.
year	1995
title	Multimedia and Knowledge-Based Computer-Aided Architectural Design
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 323-330
doi	https://doi.org/10.52842/conf.ecaade.1995.323
summary	It appears by now fairly accepted to many researchers in the field of the Computer Aided Architectural Design that the way to realize support tools for these aims is by means of the realization of Knowledge Based Assistants. This kind of computer programs, based on the knowledge engineering, finds their power and efficaciousness by their knowledge base. Nowadays this kind of tools is leaving the research world and it appears evident that the common graphic interfaces and the modalities of dialogue between the architect and the computer, are inadequate to support the exchange of information that the use of these tools requires. The use of the knowledge bases furthermore, presupposes that the conceptual model of the building realized by others, must be made entirely understandable to the architect. The CAAD Laboratory has carried out a system software prototype based on Knowledge Engineering in the field of hospital buildings. In order to overcome the limit of software systems based on usual Knowledge Engineering, by improving architect-computer interaction, at CAAD Lab it is refining building model introducing into the knowledge base two complementary each other methodologies: the conceptual clustering and multimedia technics. This research will make it possible for architects navigate consciously through the domain of the knowledge base already implemented.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_39.htm
last changed	2022/06/07 07:55

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	30ec
authors	Coates, Paul and Hall, Miles Robin
year	1995
title	The Use of CAAD to Generate Urban Form
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 599-616
summary	The paper describes a computer modelling process suitable for the generation of townscape elements using a statistical simulation based on aesthetic theory in mathematics. This approach is also used to analyse existing urban settings and thereby allow comparison with the generated output of the model indicating close agreement between the model and attractive historical townscape. This agreement depends closely upon the size of the unit chosen for measurement of the existing townscape thereby determining how the output from the model should be scaled for construction. An independent low-level designing ability appears inherent in the model and there is a discussion as to how this might be further developed.
keywords	Emergent Form, Generative Model, Power Laws, Townscape, Vernacular Style
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	1586
authors	Counsell, John A M
year	1995
title	GIS Software and Coordinated Project Information Systems - A Mechanism for Increasing the Effectiveness of 3D CAAD Models
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 389-397
summary	This paper reviews current 3D CAD building modelling by reference to a large ongoing case study, in which 3D building models and sites are used to generate coordinated drawing, schedule, and visualisation output. It focuses on barriers which current software interpose, preventing more complete use of 3D CAD to integrate building project information systems. Comparisons are made with tools and methodology developed in GIS, in which users make different selections as required from common databases, and it is argued that used in conjunction with 3D CAD building models, they could improve functionality and reduce barriers to effective deployment.
keywords	Building Model, Coordinated Information Systems
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	95b9
authors	Devernay, F. and Faugeras, O.
year	1995
title	Automatic Calibration and Removal of Distortion from scenes of structured environments
source	Proceedings of the SPIE Conference on Investigate and Trial Image Processing, 2567, SPIE, San Diego, CA, July 1995
summary	Most algorithms in 3-D Computer Vision rely on the pinhole camera model because of its simplicity, whereas video optics, especially low-cost wide-angle lens, generate a lot of non-linear distortion which can be critical. To ønd the distortion parameters of a camera, we use the following fundamental property: a camera follows the pinhole model if and only if the projection of every line in space onto the camera is a line. Consequently, if we ønd the transformation on the video image so that every line in space is viewed in the transformed image as a line, then we know how to remove the distortion from the image. The algorithm consists of ørst doing edge extraction on a possibly distorted video sequence, then doing polygonal approximation with a large tolerance on these edges to extract possible lines from the sequence, and then ønding the parameters of our distortion model that best transform these edges to segments. Results are presented on real video images, compared with distortion c...
series	other
last changed	2003/04/23 15:14

_id	6a3a
authors	Ekholm, A., Fridqvist, S. and Af Klercker, J.
year	1995
title	BAS.CAAD - Building and User Activity Systems Modelling for Computer-Aided Architectural Design
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 217-230
doi	https://doi.org/10.52842/conf.ecaade.1995.217
summary	In the early stages of the building design process not only building and site but also user activities and experiences are formed. This paper presents a development programme for CAAD where conceptual models of some fundamental characteristics of building, site and user organisation will be developed and implemented in a prototype CAAD-programme. The models are based both on empirical studies and an ontological Framework which is also used for organising the basic object structure of the prototype CAD program. The architectural design process has several characteristics which a CAAD-programme must support, e.g incremental determination of properties, change of scale and shift of focus. The research investigates how the design object and the user interface can be formed to serve this working method. One important field is to study the usefulness of the user organisation model for the brief and building management stages. The programming work for the prototypes is done with Smalltalk on Macintosh computers. The tests of the prototype includes spatial co-ordination of the three systems.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_28.htm
last changed	2022/06/07 07:55

_id	c6b2
authors	Fenves, S.J., Garrett, J.H., Kiliccote, H., Law, K.H. and Reed, K.A.
year	1995
title	Computer representations of design standards and building codes: a U.S. perspective
source	The Int. Journal of Construction IT3(1), pp.13-34
summary	Standards representation and processing in the United States has had a long and interesting history of development. The work in the past has focused primarily on representing a standard, evaluating the intrinsic properties of that represented standard, and evaluating designs for conformance to that standard. To date, for a variety of reasons, standards writing organizations and computer-aided design software vendors have not adopted much of the results of this research. The failure of the approach so far in the U.S. can be traced to two distinct areas. One major cluster of causes is methodological: the initial concepts were not backed up by usable, persistent computer tools; and the initial application and model were not representative. The second cluster of causes of failure is professional, and has a lot to do with the dynamics of interaction of individuals and organizations. Future research must address the inadequacies of the current representations and create models that are able to represent all, or almost all, of the different types of provisions in any given standard; investigate and deliver a much richer set of processing functionality's, such as more support for use of design standards in earlier phases of design; support the treatment of multiple, heterogeneous standards available from distributed sources; and determine what type of support is needed to go from the textual versions of design standards to the formal models that can support sophisticated computation.
series	journal paper
last changed	2003/05/15 21:45

_id	c681
authors	Gero, J.S. and Kazakov, V.
year	1995
title	Evolving building blocks for design using genetic engineering: A formal approach
source	J.S. Gero and F. Sudweeks (eds), Advances in Formal Design Methods for CAD , IFIP-University of Sydney, Sydney, pp. 29-48
summary	This paper presents a formal approach to the evolution of a representation for use in a design process. The approach adopted is based on concepts associated with genetic engineering. An initial set of genes representing elementary building blocks is evolved into a set of complex genes representing targeted building blocks. These targeted building blocks have been evolved because they are more likely to produce designs which exhibit desired characteristics than the commencing elementary building blocks. The targeted building blocks can then be used in a design process. The paper presents a formal evolutionary model of design representations based on genetic algorithms and uses pattern recognition techniques to execute aspects of the genetic engineering. The paper describes how the state space of possible designs changes over time and illustrates the model with an example from the domain of two-dimensional layouts. It concludes with a discussion of style in design.
series	other
email
last changed	2003/04/06 07:29

_id	2a99
authors	Keul, A. and Martens, B.
year	1996
title	SIMULATION - HOW DOES IT SHAPE THE MESSAGE?
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4], pp. 47-54
summary	Architectural simulation techniques - CAD, video montage, endoscopy, full-scale or smaller models, stereoscopy, holography etc. - are common visualizations in planning. A subjective theory of planners says "experts are able to distinguish between 'pure design' in their heads and visualized design details and contexts like color, texture, material, brightness, eye level or perspective." If this is right, simulation details should be compensated mentally by trained people, but act as distractors to the lay mind. Environmental psychologists specializing in architectural psychology offer "user needs' assessments" and "post occupancy evaluations" to facilitate communication between users and experts. To compare the efficiency of building descriptions, building walkthroughs, regular plans, simulation, and direct, long-time exposition, evaluation has to be evaluated. Computer visualizations and virtual realities grow more important, but studies on the effects of simulation techniques upon experts and users are rare. As a contribution to the field of architectural simulation, an expert - user comparison of CAD versus endoscopy/model simulations of a Vienna city project was realized in 1995. The Department for Spatial Simulation at the Vienna University of Technology provided diaslides of the planned city development at Aspern showing a) CAD and b) endoscopy photos of small-scale polystyrol models. In an experimental design, they were presented uncommented as images of "PROJECT A" versus "PROJECT B" to student groups of architects and non-architects at Vienna and Salzburg (n= 95) and assessed by semantic differentials. Two contradictory hypotheses were tested: 1. The "selective framing hypothesis" (SFH) as the subjective theory of planners, postulating different judgement effects (measured by item means of the semantic differential) through selective attention of the planners versus material- and context-bound perception of the untrained users. 2. The "general framing hypothesis" (GFH) postulates typical framing and distraction effects of all simulation techniques affecting experts as well as non-experts. The experiment showed that -counter-intuitive to expert opinions- framing and distraction were prominent both for experts and lay people (= GFH). A position effect (assessment interaction of CAD and endoscopy) was present with experts and non-experts, too. With empirical evidence for "the medium is the message", a more cautious attitude has to be adopted towards simulation products as powerful framing (i.e. perception- and opinion-shaping) devices.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

For more results click below: