Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 185

Reformat results as: short short into frame detailed detailed into frame

_id	ead7
authors	Gero, J.S. and Schnier, T.
year	1995
title	Evolving representations of design cases and their use in creative design
source	J.S. Gero, M.L. Maher and F. Sudweeks (eds), Preprints Computational Models of Creative Design , Key Centre of Design Computing, University of Sydney, pp. 343-368
summary	In case-based design, the adaptation of a design case to new design requirements plays an important role. If it is sufficient to adapt a predefined set of design parameters, the task is easily automated. If, however, more far-reaching, creative changes are required, current systems provide only limited success. This paper describes an approach to creative design adaptation based on the notion of creativity as 'goal oriented shift of focus of a search process'. An evolving representation is used to restructure the search space so that designs similar to the example case lie in the focus of the search. This focus is than used as a starting point to generate new designs.
series	other
email
last changed	2003/04/06 15:22

_id	2d1a
authors	Gero, John S. and Jun, Han J.
year	1995
title	Visual semantic emergence to support creative design: A computational view
source	J.S. Gero, M. L. Maher and F. Sudweeks (eds), Preprints Computational Models of Creative Design , University of Sydney, pp. 87-117
summary	One computational model of creative designing involves the introduction of new variables or schemas into the designing process. This paper describes and elaborates an approach where an emergence process is used to emerge visual semantics features in a design as it proceeds. In particular visual symmetry, visual rhythm, visual movement and visual balance are emerged. The processes of emergence introduce new variables into the design process. Emergence becomes one of the computational processes capable of playing a role in creative designing.
series	other
email
last changed	2003/04/06 15:34

_id	aa38
authors	Tan, M., Gan, J., Indorf, P., Man, D., Teh, R., Datta, S., Serra, L. and Loo, J.
year	1995
title	Multivalent Architectural Case Information for Creative Reasoning
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 543-554
summary	The theoretical underpinnings, practical and technical implementation of a multimedia database to support creative designing is presented through a prototype system which would go on-line in the near future. At the heart of the system is the notion that architectural knowledge is multivalent ñ requiring the means for recombination in new and different ways to support design thinking. The system also attempts to deal with the practical issues of case building, 3D modelling, interface design and technical clarity.
keywords	Creativity, Multimedia, Case-Based Reasoning, Computer-Aided Architectural Design, Architectural Database, Visual Database, Virtual Reality.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c777
authors	Bach, Fr.-W., Rachkov, M., Seevers, J. and Hahn, M.
year	1995
title	High tractive power wall-climbing robot
source	Automation in Construction 4 (3) (1995) pp. 213-224
summary	There are a lot of tasks in building construction and maintenance which demand either the carriage of heavy technological equipment along vertical and sloping surfaces and/or provision for force technological operations on such surfaces For example, surface cleaning or grinding by automatic equipment, the mounting of expansion bolts and anchors by drilling or by driving in. Additionally surface inspection by heavy measuring devices and the painting of big construction areas are difficult and expensive to perform manually. It is therefore expedient to apply climbing robots to automate these tractive power operations. The climbing robot was developed for such purposes. The design of the robot with increased load capacity and improved gripper system was carefully considered. The robot has a video camera for orientation and for the monitoring of processes. A sensor-based computer control system is used. This paper contains a brief overview of the technical parameters and experimental characteristics of the robot's transport module, control system with video camera unit, and the different schemes of the robot's application.
keywords	Climbing robot; Two-staged gripper system Monitoring Sensor-based computer control system; Automatic Technological equipment
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:36

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	6966
authors	Chuah, M.C., Roth, S.F., Kolojejchick, J., Mattis, J. and Juarez, O.
year	1995
title	SageBook: Searching data-graphics by content
source	Proceedings of CHI , ACM Press
summary	Currently, there are many hypertext-like tools and database retrieval systems that use keyword search as a means of navigation. While useful for certain tasks, keyword search is insufficient for browsing databases of data-graphics. SageBook is a system that searches among existing data-graphics, so that they can be reused with new data. In order to fulfill the needs of retrieval and reuse, it provides: 1) a direct manipulation, graphical query interface; 2) a content description language that can express important relationships for retrieving data-graphics; 3) automatic description of stored data-graphics based on their content; 4) search techniques sensitive to the structure and similarity among data-graphics; 5) manual and automatic adaptation tools for altering data-graphics so that they can be reused with new data.
series	other
last changed	2003/04/23 15:50

_id	64bf
authors	Chuah, M.C., Roth, S.F., Mattis, J., and Kolojejchick, J.A.
year	1995
title	SDM: Selective Dynamic Manipulation of Visualizations
source	Proceedings of UIST‘95, ACM Symposium on User Interface Software and Technology, Pittsburg. 61-70
summary	In this paper we present a new set of interactive techniques for 2D and 3D visualizations. This set of techniques is called SDM (Selective Dynamic Manipulation). Selective, indicating our goal for providing a high degree of user control in selecting an object set, in selecting interactive techniques and the properties they affect, and in the degree to which a user action affects the visualization. Dynamic, indicating that the interactions all occur in real-time and that interactive animation is used to provide better contextual information to users in response to an action or operation. Manipulation, indicating the types of interactions we provide, where users can directly move objects and transform their appearance to perform different tasks. While many other approaches only provide interactive techniques in isolation, SDM supports a suite of techniques which users can combine to solve a wide variety of problems.
series	other
last changed	2003/04/23 15:14

_id	262e
authors	Does, Jan van der
year	1995
title	A Student’s Project: Choices in Media for Communication and Presentation
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	The Delft Faculty of Architecture is currently working with a new educational method called “Problem Based Learning”. After teaching basic principles in free-hand drawing and theory of form in the new block system, the sector Media takes also part in the third and fourth year, mostly in the design disciplines. Communication and presentation techniques, so important for the future, that architects and townplanners were organized for further discussions in close cooperation between the three sections of the Media sector. It resulted in the creation of a media module. Finally a short video production about the Faculty of Architecture resp. the sector Media at Delft University of Technology will be presented.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	b378
authors	Ervin, S.M.
year	1995
title	New GIS Resources for Landscape Architects
source	Landscape Architecture
summary	This article discusses and illustrates the convergence of 'GIS' and 'CAD' technologies, especially from the point of view of landscape architecture and planning.
series	other
email
last changed	2003/04/23 15:50

_id	d2ba
authors	Friedman, S. A.
year	1995
title	Urban visualization and simulation. Thesis
source	M. Arch. [UCLA], 1995
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	acadia21_100
id	acadia21_100
authors	Ghandi, Mona; Ismail, Mohamed; Blaisdell, Marcus
year	2021
title	Parasympathy
doi	https://doi.org/10.52842/conf.acadia.2021.100
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 100-109.
summary	Parasympathy is an interactive spatial experience operating as an extension of visitors’ minds. By integrating Artificial Intelligence (AI), wearable technologies, affective computing (Picard 1995; Picard 2003), and neuroscience, this project blurs the lines between the physical, digital, and biological spheres and empowers users’ brains to solicit positive changes from their spaces based on their real-time biophysical reactions and emotions. The objective is to deploy these technologies in support of the wellbeing of the community especially when related to social matters such as inclusion and social justice in our built environment. Consequently, this project places the users’ emotions at the very center of its space by performing real-time responses to the emotional state of the individuals within the space.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	eccf
authors	Herbert, Daniel M.
year	1995
title	Models, Scanners, Pencils, and CAD: Interactions Between Manual and Digital Media
doi	https://doi.org/10.52842/conf.acadia.1995.021
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 21-34
summary	This paper discusses new approaches to the relation between handmade and computer aided media in design. The discussion focuses on two advanced studio projects in which graduate student designers incorporated interactions between physical models, a digital scanner, handmade drawings, and the manipulation of images in the computer. These interactions provide a valuable supplement to traditional means -- both manual and digital -- for generating, developing, and representing architectural form. Features of the student’s work that other designers will find significant are its focus on multiple interactions, its setting within a realistic design process, and its use of low levels of computer technology. After describing details of the designer’s media techniques, the paper discusses the practical and theoretical implications of the work.
series	ACADIA
last changed	2022/06/07 07:49

_id	4248
authors	Kalay, Y.E. and Skibniewski, M.J.
year	1995
title	Automation in Construction: Fulfilling the promise
source	Automation in Construction 4 (1) (1995) pp. 1-3
summary	Three years ago, Elsevier Science B.V. has embarked on one of the most important endeavors for the A/E/C community, worldwide. With the help of three dedicated individuals, it has inaugurated a new refereed journal devoted to discussing, critically examining and disseminating the latest developments affecting the processes that lead to the design, construction and use of buildings and other facilities. Unlike other jour-nals in this field, Automation in Construction has been dedicated to exploring the processes and tools used by the A/E/C community, rather than its products. It has been dedicated to issues concerning the A/ E / C community specifically, and to methods, practices and tools that make use of computers in particular, thereby filling a void which existed, until its inauguration, within the A/E/C community's publications.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:30

_id	0b30
authors	Matalasov, M.
year	1995
title	Optimal Choice of the Equipment Depending on the Requirements of Educational Projecting
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	The means of architectural endoscopy play an important role in teaching architects, making it possible to form effectively spatial perception. However, the high price of the up-to-date equipment requires its optimal implementation. On the early stages of training architectural students it is reasonable to use sufficiently simple devices: telemaketoscope connected with a 386DX-computer and printer to get static video series. More complicated educational projects demand studying the object in movement, so a VHS or S-VHS VCR is added to the system. And at last one most employ complex system, comprising minimum 486DX-computer, videostudio and special modernized camcorder is intended for real architectural projects. Such systems make it possible to combine the projected object with the real environment, executing the object itself either in the form of a computer 3D-model or in the form of scale model. The examples of training and real works, mentioned in the paper, illustrate the efficiency of employing proposed system in various fields of architectural designing.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ddss9464
id	ddss9464
authors	McCartney, Kevin and Ismail, Ashraf Lotfy R. M.
year	1994
title	A Tool for Conceptual Design Evaluation Based on Compliance with Supplementary Planning Guidance and Local Planning Policies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are being designed in order to check design compliance with the requirements of local planning authorities; with regards to building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. The measures to determine proper evaluation will be based upon site-development briefs, and design guides produced by the local planning authorities. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. It will also provide many functions for editing two and three dimensional drawings specifically for the environmental analysis tasks. In addition to the common graphical output of Aut0CAD; i.e. plans, elevations and three dimensional models, the tool will generate textual analysis of the design in report format to use as part of the Environmental Impact Statement of proposed development. The speculative tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out tailor-made for architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of materials for environmental statements. Second, field observation will be carried out to observe the concerned professionals as decision-makers while assessing building design proposals. A prototype will be designed and then tested against the expectations of the tool designer, then the tool performance will be evaluated by a team of professionals participated in the field studies. A critical analysis of the prototype design methodology and the concluding study findings will be documented as part of a postgraduate research thesis to be completed in June 1995.
series	DDSS
last changed	2003/08/07 16:36

_id	3b58
authors	Morozumi, M., Murakami, Y. and Iki, K.
year	1995
title	Network Based Group Work CAD for UNIX Workstation
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 637-646
summary	This paper discusses a model of collaborative process of architectural design and a network based group work CAD to support them. In the first part, the authors introduce a prototype system they developed to improve the environment for synchronous (interactive) design communication. Reviewing the process Of students' collaborative work that used the system, the authors point out that the frequent and timely exchange of CAD data with the system could not only stimulate designer's' imagination but accelerate the process of design development.
keywords	Collaboration, Groupwork, CAD, Design Process, Network
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	781a
authors	Navon, R.
year	1995
title	Conceptual design of a flooring robot: development methodology and results
source	Automation in Construction 4 (3) (1995) pp. 225-238
summary	The paper describes the methodology used in the deveIopment of the Surface Horizontal Autonomous Multipurpose Interior Robot (SHAMIR). The main emphasis in this paper is on the graphic simulation stage, which permits the analysis of parameters normally associated with detailed design, as early as the conceptual design stage. The performance specifications arc described and the conceptual design is specified. The simulation results determined the optimal joint velocity. 10(R) mm/s, and SHAMIR productivity in floor tile setting, at least 6 sq.m/hr., which is three times as high as that of the manual method. These results arc encouraging enough to continue developing the robot, and at the same time they appear to prove the effectiveness of the methodology.
keywords	Construction: Automation; Robotics; Graphic-Simulation; Development
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:27

_id	0f58
authors	Schrage, M.
year	1995
title	No more teams: Mastering the dynamics of creative collaboration
source	New York: Currency and DoubleDay
summary	For organizations that care about innovation, individual creativity isn't enough anymore -- people need to be in creative, collaborative relationships. For "virtual" organizations, collaborative relationships are a must or the organization won't survive. The world's greatest collaborations -- Picasso/ Braque, Watson/ Crick, Wozniak/Jobs -- relied on "shared spaces" where they could play with their ideas. Shared spaces, however you set them up, provide the neutral ground on which any and all ideas can be aired and considered. Developing a shared space for collaboration is about effectively using tools -- from felt tips on napkins, to whiteboards, to specialized computer software -- that can provide the shared space to keep all the good ideas, to cope with every objection, to handle conflicts as they come up, to make sure everyone gets their say and has it considered.
series	other
last changed	2003/04/23 15:14

_id	93ca
authors	Sudweeks, F. and Rafaeli, S.
year	1995
title	How do you get a hundred strangers to agree: Computer mediated communication and collaboration
source	T. M. Harrison and T. D. Stephen (Eds.), Computer Networking and Scholarly Communication in the Twenty-First-Century University. New York: SUNY Press
summary	This chapter is an introspective account of the formation and implementation experiences of a large international group of researchers who are using computer-mediated communication to study computer-mediated communication. We describe the genesis and ongoing development of the study, focusing on issues of consensus formation as guidelines were sought on the ethical implications of the study, and the integrity and autonomy of scientific enquiry. We critically examine the notions of global village, social presence, conversation as a universal ideal, and interactivity in a computer-mediated collaborative environment.
series	other
last changed	2003/04/23 15:50

For more results click below: