Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 393

Reformat results as: short short into frame detailed detailed into frame

_id	2508
authors	Eggli, L. and Bruderlin, B.D. (et al.)
year	1995
title	Sketching as a Solid Modeling Tool
source	Third Symposium on Solid Modeling and Applications. C. Hoffmann and J. Rossignac. Salt Lake City, ACM: 313-321
summary	This paper describes 'Quick-sketch', a 2d and 3d modeling tool for pen based computers. Users of this system define a model by simple pen strokes drawn directly on the screen of a pen-based PC. Lines, circles, arcs, or B-spline curves are automatically distinguished, and interpreted from these strokes. The system also automatically determines relations, such as right angles, tangencies, symmetry, and parallelism, from the sketch input, These relationships are then used to clean up the drawing by making the approximate relationships exact. Constraints are established to maintain the relationships in further editing. A constraint maintenance system, which is based on gestural manipulation and soft constraints, is employed in this system. Several techniques for sketch based definitions of solid objects are provided as well, including extrusion, surface of revolution, ruled surfaces and sweep. Feat ures can be sketched on the surfaces of 3d objects, using the same 2d- and 3d techniques. This way, objects of medium complexity can be sketched in seconds. The system can be used as a front-end to more sophisticated modeling, rendering or animation environments, serving as a hand sketching tool in the preliminary design phase.
series	other
last changed	2003/04/23 15:50

_id	2768
authors	Maciel, P.W.C. and Shirley, P.
year	1995
title	Visual navigation of large environments using textured clusters
source	Proceedings 1995 Symposium on Interactive 3D Graphics, pp. 95-102, June 1995
summary	A visual navigation system is described which uses texture mapped primitives to represent clusters of objects to maintain high and approximately constant frame rates. In cases where there are more unoccluded primitives inside the view- ing frustum than can be drawn in real-time on the workstation, this system ensures that each visible object, or a cluster that includes it, is drawn in each frame. The system supports the we of traditional "level-of-detail" representations for individual objects, and supports the automatic genera- tion of a certain type of level-of-detail for objects and clusters of objects. The concept of choosing a representation from among those associated with an object that accounts for the direction from which the object is viewed is also supported. The level-of-detail concept is extended to the whole model and the entire scene is stored as a hierarchy of levels-of-detail that is traversed top-down to iind a good representation for a given viewpoint. This system does not assume that visibility information can be extracted from the model and is thus especially suited for outdoor environments.
series	other
last changed	2003/04/23 15:50

_id	0611
authors	Ward, Gregory J.
year	1995
title	Making global illumination user-friendly
source	Eurographics Workshop on Rendering
summary	Global illumination researchers tend to think in terms of mesh density and sampling frequency, and their software reflects this in its user interface. Advanced rendering systems are rife with long command lines and parameters for tuning the sample densities, thresholds and other algorithm-specific variables, and the novice user is quickly lost in a sea of possibilities. This paper details a successful effort of making one such global illumination system usable by people who understand their problems, even if they do not understand the methods needed to solve them, through an assisted oracle approach. A single program is introduced to map a small set of intuitive control variables to the rendering commands and parameter settings needed to produce the desired output in a reasonable time. This new executive program then serves as the basis for a graphical user interface that is both friendly in its appearance and reliable in its performance. Finally, we conclude with some future directions for improving this interface.
series	other
last changed	2003/04/23 15:50

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.1995.139
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	c078
authors	Allegra, M, Fulantelli, G. and Mangiarotti, G.
year	1995
title	A New Methodology to Develop Hypermedia Systems for Architecture History
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 43-52
doi	https://doi.org/10.52842/conf.ecaade.1995.043
summary	This paper illustrates a research project concerning the analysis of architectural works through a comparative study based on hypermedia tools; by exploring the hypermedia, users can find the main subjects relative to the "method " of architectural planning. The use of multimedia in architecture allows the integration in a single system of different types of information which are necessary for the description of a work. texts, designs, photos and sounds. In addition, the hypertext information structure allows the direct intervention on analyzed projects, by pointing out the more important themes and their relationships. Users have the opportunity to immerse themselves in hypermedia and choose the subject to navigate through on each occasion. Our research project aims at developing a prototype concerning two architects. I.L.Kahn and F.L. Wright. The development methodology is based on the key role played by the components of architectonic works, thus allowing users to compare them in a simple and correct way. The methodology used in this work can be extended to other architects or periods, by simply changing the possibility of navigation, i.e. by changing the reading keys.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_6.htm
last changed	2022/06/07 07:54

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	1a52
authors	Amor, R., Augenbroe, G., Hosking, J., Rombouts and W., Grundy, J.
year	1995
title	Directions in modelling environments
source	Automation in Construction 4 (3) (1995) pp. 173-187
summary	Schema definition is a vital component in the computerised A/E/C projects. existing tools to manage this task are limited both in terms of the scope Of problems they can tackle and their integration with each other. This paper describes a global modellling and development environment for large modelling projects. This environment provides a total solution from initial design of schemas to validation, manipulation arid navigation through final models. A major benefit of the described system is the ability to provide multiple views of evolving schemas (or models) in both graphical and textual forms This allows modellers to visualise their schemas and instance models either textually or graphically as desired. The system automatically maintains the Conisistency of the informalion in these views even when modifications are made in other views. Simple and intuitive view navigation methods allow required information to he rapidly accessed. The environment supports strict checking of model instances and schemas in one of the major ISO-standardised modelling languages no used in product data technology. Ill this paper we show how such a modelling environment has been constructed for evaluation in the JOULE founded COMBINE project.
keywords	Modelling Environment; Consistency; Multiple Views: Views; Building Models; Information Management; Integrated System; Product Modelling
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:33

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	df4b
authors	Angulo Mendivil, Antonieta Humbelina
year	1995
title	On the Conceptual Feasibility of a CAAD-CAAI Integrated Decision Support System: A Computer Aided Environment for Technical Decision Making in Architecture
source	Delft University of Technology
summary	This document addresses two questions: What are the ultimate means of design support we can offer to the architect, and how can we devise them? We are not the first ones to address these questions, neither the first ones to point our finger in the direction of Decision Support Systems for such purposes. Nevertheless, we may be among those scholars that understanding 'Decision Support" in terms of "Learning Support", are willing to explore the implications that such an understanding assumes for the concept of Decision Support Systems. Our exploration in such regards has shown us that knowledge application and knowledge acquisition cycles describe a continuum, and that such cycles, encapsulated in our "Practice Based Learning" and "Continuing Professional Development" dynamics are present in both our instructional and professional environments. From such a perspective, our scope regarding feasible Decision Support Systems is not restricted to the use of CAAD instrumental resources, but expanded into a context of CAAD-CAAI integration. Throughout this document we conceive a system that blends CAAD and CAAI resources looking forward to the creation of a Support Environment that seeks to motivate a reflective attitude during design, in such a way, upgrade our capability for acquiring as well as applying knowledge in design. In instrumental terms, this document explains how mainstream CAAD developments in the field of "Intelligent Front End Technology" and CAAI developments in the field of "Knowledge-based Curricular Networks" can complement each other in the establishment of a Decision Support System of trans-environmental relevancy. As an application framework for the concept and instrumental base described above, this document presents an image of the kind of decision-making model that it will intend to support, the kind of task support model it will look forward to implement, and the kind of general instrumental layout it will require. On the basis of such an instrumental layout, the system that is hereby outlined can be regarded as a "CAAD-CAAI Integrated", "Intelligent", and "User-Oriented" Interface System.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	5236
authors	Arciszewski, T., Michalski, R.S. and Dybala, T.
year	1995
title	STAR methodology-based learning about construction accidents and their prevention
source	Automation in Construction 4 (1) (1995) pp. 75-85
summary	This paper presents the results of a feasibility study concerning the application of STAR-methodology-basedmachine learning to construction accidents and their prevention. A ten-stage knowledge acquisition process is presented and its individual stages described. Knowledge about construction accidents was acquired using a collection of 225 examples, based on actual accidents records. Inductive learning with a system based on the STAR-methodology was employed. This system was used in both the generalization and specialization modes of operation. The decision rules obtained are complex, but their interpretation is clear and they seem to be consistent with the present understanding of causal relationships between accident results and various factors affecting them. Also, the rules were verified using average overall and omission empirical error rates, which were calculated as average for three randomly determined sequences of examples. These error rates were calculated for all seven steps in the machine learning process, and were used to construct learning curves for both error rates. The relationships between error rates and the number of examples used for learning are analyzed, and coefficients of linear regression given and discussed. The 225 examples used were found to be grossly insufficient to produce reliable knowledge about accidents and therefore a large study is postulated which would involve the collection of a larger number of construction accident records. In general, our study demonstrated the feasibility of machine learning in acquiring knowledge about construction accidents.
keywords	Construction accidents and their prevention; Knowledge acquisition; Machine learning; Multi-stepmachine learning process
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:31

_id	e72e
authors	Asaro, N., Corrao, R., Faconti, D., Fiandaca, O., Grifoni, P. and Silvani, A.
year	1995
title	Riesce: An Hypertextual Tool for Browsing Information Produced in the Building Sector by PFEd
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 401-408
doi	https://doi.org/10.52842/conf.ecaade.1995.401
summary	The structure of a set of documents allow for navigation inside single texts. Yet it is often also an obstacle to comparability between different parts and concepts. Even document formatting is only a partial answer to the problem, since it fails to develop the matter of relationships between enunciation and results. It was need to retrieve information about the scientific findings made by Research Units (Operating Units) during the first three year period of the "Progetto Finalizzato Edilizia" (PFEd) for assessment and transfer purposes which led us to design and develop a system to facilitate the retrieval of the relevant information. We chose the building sector for this application because of its relative lack of previous experience of this type, the variety and complexity of documentation available and, last but not least, the general underestimation of research topics and results vis-à-vis the development of the sector. By making the suggestion and information inherent in its findings more available, in terms of method and ambit, as well as more explicit, the research has already achieved a significant result. In view of the prototype character of the experiment, the information will probably be adopted to produce an hypertext on the final results.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_48.htm
last changed	2022/06/07 07:54

_id	32e3
authors	Avis, Andrew
year	1995
title	Public Spaces on the Information Highway: The Role of Community Networks
source	University of Calgary
summary	This thesis explores the phenomenon of community networking in Canada, particularly as it impacts the issue of universal access to emerging broadband networks. The regulatory context of community networking is examined, and recent government efforts reviewed and critiqued. Through two case studies, an analysis of three potential benefits arising from community networking is developed. These three benefits are: increased participation in the democratic system, increased access to education, and community development. Several models for providing universal access, through community networks, are presented.
series	thesis:MSc
email
more	http://www.ucalgary.ca/UofC/faculties/GNST/theses/avis/
last changed	2003/11/21 15:16

_id	c777
authors	Bach, Fr.-W., Rachkov, M., Seevers, J. and Hahn, M.
year	1995
title	High tractive power wall-climbing robot
source	Automation in Construction 4 (3) (1995) pp. 213-224
summary	There are a lot of tasks in building construction and maintenance which demand either the carriage of heavy technological equipment along vertical and sloping surfaces and/or provision for force technological operations on such surfaces For example, surface cleaning or grinding by automatic equipment, the mounting of expansion bolts and anchors by drilling or by driving in. Additionally surface inspection by heavy measuring devices and the painting of big construction areas are difficult and expensive to perform manually. It is therefore expedient to apply climbing robots to automate these tractive power operations. The climbing robot was developed for such purposes. The design of the robot with increased load capacity and improved gripper system was carefully considered. The robot has a video camera for orientation and for the monitoring of processes. A sensor-based computer control system is used. This paper contains a brief overview of the technical parameters and experimental characteristics of the robot's transport module, control system with video camera unit, and the different schemes of the robot's application.
keywords	Climbing robot; Two-staged gripper system Monitoring Sensor-based computer control system; Automatic Technological equipment
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:36

_id	f8f0
authors	Bakhtari, Shirin and Oertel, Wolfgang
year	1995
title	DOM: An Active Assistance System for Architectural and Engineering Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 153-162
summary	This article delineates an active design assistance system for conceptual design, called DOM which is the abbreviation for Domain Ontology Modelling. The intention of our work is to endorse the role of modelling a common and shared platform of design knowledge as well as to address the crucial task of representing design decisions and engineering judgements in order to evaluate design layouts and to support layout construction from scratch.The prerequisites and assumptions for an appropriate role of an active design assistance system are explained. The presented paper contains both a conceptual and a technical exploration of the DOM system.
keywords	Design Ontology, Decision Making, Analysis, Synthesis
series	CAAD Futures
last changed	2003/11/21 15:16

_id	c3fa
authors	Barnanente, A., Cuscito, A.P. and Maiellaro, N.
year	1995
title	Expert System and Hypertext for Development Control
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 347-354
doi	https://doi.org/10.52842/conf.ecaade.1995.347
summary	The paper deals with an interactive system based on expert system and hypertext interaction in order to meet the demands of support for local government officials' activity in building-application inspection. Also described are the planning departments context and the problem related to eliciting knowledge in building-inspection process.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_42.htm
last changed	2022/06/07 07:54

_id	d79e
authors	Boerner, Katy
year	1995
title	Interactive, Adaptive, Computer-aided Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 627-634
summary	A general framework of a system that supports building engineering is presented. It accounts for a set of desirable features. Among them are (1) graphical man-machine interaction, (2) high interactivity to facilitate the acquisition of the huge amount of knowledge necessary to support design, (3) incremental knowledge acquisition as the basis for incrementally increasing system support, and (4) adaptability to the tasks which are tackled, the distinctive features of the domain, and user preferences. This paper provides the underlying assumptions and basic approaches of the modules constituting this framework and sketches the current implementation.
keywords	Graphical Interfaces, Incremental Knowledge Acquisition, Knowledge Organization, Case-Based Reasoning, Design Prototypes, Analogical Reasoning
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ebc4
authors	Brusasco, Pio Luigi and Caneparo, Luca
year	1995
title	Coordinative Model of Design and Building Process
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 297-306
doi	https://doi.org/10.52842/conf.ecaade.1995.297
summary	The paper presents a coordinative model of the design and building process. It is divided into three main sections. The first presents a brief formalization of the model and of its representations, respectively the argumentative, rhetorical and semantic graphs. The second introduces the framework adopted for the development of the model, and describes the two main sub- systems: communicative and coordinative. The third presents the computer implementation, based on the Client,/Client model for the communicative system and on the Client/Server for the coordinative system.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_36.htm
last changed	2022/06/07 07:54

_id	00e7
authors	Bushby, S.T.
year	1997
title	BACnetTM: a standard communication infrastructure for intelligent buildings
source	Automation in Construction 6 (5-6) (1997) pp. 529-540
summary	Intelligent buildings require integration of a variety of computer-based building automation and control system products that are usually made by different manufacturers. The exchange of information among these devices is critical to the successful operation of the building systems. Proprietary approaches to providing this communication have created great challenges for system integrators and hampered the development of intelligent building technology. Even though digital automation and control technology has been widely available for more than a decade and islands of automation are common, intelligent buildings with integrated building services are still more of a promise than a reality. BACnetTM is a standard communication protocol for building automation and control networks developed by the American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE, Standard 135-1995: BACnetTM--A Data Communication Protocol for Building Automation and Control Networks. American Society of Heating, Refrigerating, and Air-conditioning Engineers. Atlanta, Georgia, USA, 1995). BACnetTM provides the communication infrastructure needed to integrate products made by different vendors and to integrate building services that are now independent. This paper describes the main features of the BACnetTM protocol and early experience implementing it.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	05f7
authors	Carrara, G., Confessore, G., Fioravanti, A. and Novembri, G.
year	1995
title	Multimedia and Knowledge-Based Computer-Aided Architectural Design
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 323-330
doi	https://doi.org/10.52842/conf.ecaade.1995.323
summary	It appears by now fairly accepted to many researchers in the field of the Computer Aided Architectural Design that the way to realize support tools for these aims is by means of the realization of Knowledge Based Assistants. This kind of computer programs, based on the knowledge engineering, finds their power and efficaciousness by their knowledge base. Nowadays this kind of tools is leaving the research world and it appears evident that the common graphic interfaces and the modalities of dialogue between the architect and the computer, are inadequate to support the exchange of information that the use of these tools requires. The use of the knowledge bases furthermore, presupposes that the conceptual model of the building realized by others, must be made entirely understandable to the architect. The CAAD Laboratory has carried out a system software prototype based on Knowledge Engineering in the field of hospital buildings. In order to overcome the limit of software systems based on usual Knowledge Engineering, by improving architect-computer interaction, at CAAD Lab it is refining building model introducing into the knowledge base two complementary each other methodologies: the conceptual clustering and multimedia technics. This research will make it possible for architects navigate consciously through the domain of the knowledge base already implemented.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_39.htm
last changed	2022/06/07 07:55

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

For more results click below: