Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 372

Reformat results as: short short into frame detailed detailed into frame

_id	ecaadesigradi2019_102
id	ecaadesigradi2019_102
authors	Passsaro, Andres Martin, Henriques, Gonçalo Castro, Sans?o, Adriana and Tebaldi, Isadora
year	2019
title	Tornado Pavilion - Simplexity, almost nothing, but human expanded abilities
doi	https://doi.org/10.52842/conf.ecaade.2019.1.305
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 305-314
summary	In the context of the fourth industrial revolution, not all regions have the same access to technology for project development. These technological limitations do not necessarily result in worst projects and, on the contrary, can stimulate creativity and human intervention to overcome these shortcomings. We report here the design of a small pavilion with scarce budget and an ambitious goal to qualify a space through tactical urbanism. We develop the project in a multidisciplinary partnership between academy and industry, designing, manufacturing and assembling Tornado Pavilion, a complex structure using combined HIGH-LOW technologies, combining visual programming with analog manufacture and assembly. The design strategy uses SIMPLEXITY with ruled surfaces strategy to achieve a complex geometry. Due to the lack of automated mechanical cutting or assembly, we used human expanded abilities for the construction; instead of a swarm of robots, we had a motivated and synchronized swarm of students. The pavilion became a reference for local population that adopted it. This process thus shows that less or almost nothing (Sola-Morales 1995), need not to be boring (Venturi 1966) but less can be much more (Kolarevic 2017).
keywords	Simplexity; CAD-CAM; Ruled Surfaces; expanded abilities; pavilion
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	b5d9
authors	González, Guillermo and Gutiérrez, Liliana
year	1999
title	El TDE-AC: tecnología digital y estrategia pedagógica (The Tde-ac: Digital Technology and Pedagogical Strategy)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 269-271
summary	In 1995 the programming of a specialized, expert graphic software CA-TSD, began. The TSD acronym designates a graphic language derived from the theory of spatial delimitation, it systematizes all possibilities of selection and combination of flat and volumetric figures. It establishes necessary and sufficient morphic and tactic dimensions to account for all possible relationships of selection and combination. TSD proposes a syntactic reading of those formal, pure design operations underlying traditional representations. Tracings and complex configurations described by tree-hierarchical structures of simple configurations allow for a coherent syntactic analysis of the design structure of any object this will allow the construction of a pure design formula for the conscious and unconscious prefiguration operations of an artist or style in this presentation, we will use our proprietary CA-TSD software that will allow for fast verification of what's stated, including architecture and graphic design examples.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	3138
authors	Zarnowiecka, Jadwiga C.
year	1995
title	CAD – Space and Relational Databases
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 221-225
summary	The unquestionable primacy of a principal - investor makes the creators strain themselves to present visions of their works in the most clear way. Though perspective drawings enable verification of the vision, but as a part of technical specification on the site they are, in general, needless. It is the investor, not prepared for perception of two-dimensional drawings, who enforces the designer to look for still more attractive forms of presentation of project propositions. The efforts of the creator are addressed to him - in order to be understood, to enchant him, to win the competition for the client. Until quite lately the most readable (but how expensive) form of visualization was the miniature modelling. In the case of vision which has been already put into shape, there is always somebody who can aid the creator in various forms of visualization. The one who can help in laborious drafting of perspective, or in preparation of a traditional miniature model, or in creation of a modern (i.e. computer) one.
series	plCAD
last changed	2000/01/24 10:08

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	2068
authors	Frazer, John
year	1995
title	AN EVOLUTIONARY ARCHITECTURE
source	London: Architectural Association
summary	In "An Evolutionary Architecture", John Frazer presents an overview of his work for the past 30 years. Attempting to develop a theoretical basis for architecture using analogies with nature's processes of evolution and morphogenesis. Frazer's vision of the future of architecture is to construct organic buildings. Thermodynamically open systems which are more environmentally aware and sustainable physically, sociologically and economically. The range of topics which Frazer discusses is a good illustration of the breadth and depth of the evolutionary design problem. Environmental Modelling One of the first topics dealt with is the importance of environmental modelling within the design process. Frazer shows how environmental modelling is often misused or misinterpreted by architects with particular reference to solar modelling. From the discussion given it would seem that simplifications of the environmental models is the prime culprit resulting in misinterpretation and misuse. The simplifications are understandable given the amount of information needed for accurate modelling. By simplifying the model of the environmental conditions the architect is able to make informed judgments within reasonable amounts of time and effort. Unfortunately the simplications result in errors which compound and cause the resulting structures to fall short of their anticipated performance. Frazer obviously believes that the computer can be a great aid in the harnessing of environmental modelling data, providing that the same simplifying assumptions are not made and that better models and interfaces are possible. Physical Modelling Physical modelling has played an important role in Frazer's research. Leading to the construction of several novel machine readable interactive models, ranging from lego-like building blocks to beermat cellular automata and wall partitioning systems. Ultimately this line of research has led to the Universal Constructor and the Universal Interactor. The Universal Constructor The Universal Constructor features on the cover of the book. It consists of a base plug-board, called the "landscape", on top of which "smart" blocks, or cells, can be stacked vertically. The cells are individually identified and can communicate with neighbours above and below. Cells communicate with users through a bank of LEDs displaying the current state of the cell. The whole structure is machine readable and so can be interpreted by a computer. The computer can interpret the states of the cells as either colour or geometrical transformations allowing a wide range of possible interpretations. The user interacts with the computer display through direct manipulation of the cells. The computer can communicate and even direct the actions of the user through feedback with the cells to display various states. The direct manipulation of the cells encourages experimentation by the user and demonstrates basic concepts of the system. The Universal Interactor The Universal Interactor is a whole series of experimental projects investigating novel input and output devices. All of the devices speak a common binary language and so can communicate through a mediating central hub. The result is that input, from say a body-suit, can be used to drive the out of a sound system or vice versa. The Universal Interactor opens up many possibilities for expression when using a CAD system that may at first seem very strange.However, some of these feedback systems may prove superior in the hands of skilled technicians than more standard devices. Imagine how a musician might be able to devise structures by playing melodies which express the character. Of course the interpretation of input in this form poses a difficult problem which will take a great deal of research to achieve. The Universal Interactor has been used to provide environmental feedback to affect the development of evolving genetic codes. The feedback given by the Universal Interactor has been used to guide selection of individuals from a population. Adaptive Computing Frazer completes his introduction to the range of tools used in his research by giving a brief tour of adaptive computing techniques. Covering topics including cellular automata, genetic algorithms, classifier systems and artificial evolution. Cellular Automata As previously mentioned Frazer has done some work using cellular automata in both physical and simulated environments. Frazer discusses how surprisingly complex behaviour can result from the simple local rules executed by cellular automata. Cellular automata are also capable of computation, in fact able to perform any computation possible by a finite state machine. Note that this does not mean that cellular automata are capable of any general computation as this would require the construction of a Turing machine which is beyond the capabilities of a finite state machine. Genetic Algorithms Genetic algorithms were first presented by Holland and since have become a important tool for many researchers in various areas.Originally developed for problem-solving and optimization problems with clearly stated criteria and goals. Frazer fails to mention one of the most important differences between genetic algorithms and other adaptive problem-solving techniques, ie. neural networks. Genetic algorithms have the advantage that criteria can be clearly stated and controlled within the fitness function. The learning by example which neural networks rely upon does not afford this level of control over what is to be learned. Classifier Systems Holland went on to develop genetic algorithms into classifier systems. Classifier systems are more focussed upon the problem of learning appropriate responses to stimuli, than searching for solutions to problems. Classifier systems receive information from the environment and respond according to rules, or classifiers. Successful classifiers are rewarded, creating a reinforcement learning environment. Obviously, the mapping between classifier systems and the cybernetic view of organisms sensing, processing and responding to environmental stimuli is strong. It would seem that a central process similar to a classifier system would be appropriate at the core of an organic building. Learning appropriate responses to environmental conditions over time. Artificial Evolution Artificial evolution traces it's roots back to the Biomorph program which was described by Dawkins in his book "The Blind Watchmaker". Essentially, artificial evolution requires that a user supplements the standard fitness function in genetic algorithms to guide evolution. The user may provide selection pressures which are unquantifiable in a stated problem and thus provide a means for dealing ill-defined criteria. Frazer notes that solving problems with ill-defined criteria using artificial evolution seriously limits the scope of problems that can be tackled. The reliance upon user interaction in artificial evolution reduces the practical size of populations and the duration of evolutionary runs. Coding Schemes Frazer goes on to discuss the encoding of architectural designs and their subsequent evolution. Introducing two major systems, the Reptile system and the Universal State Space Modeller. Blueprint vs. Recipe Frazer points out the inadequacies of using standard "blueprint" design techniques in developing organic structures. Using a "recipe" to describe the process of constructing a building is presented as an alternative. Recipes for construction are discussed with reference to the analogous process description given by DNA to construct an organism. The Reptile System The Reptile System is an ingenious construction set capable of producing a wide range of structures using just two simple components. Frazer saw the advantages of this system for rule-based and evolutionary systems in the compactness of structure descriptions. Compactness was essential for the early computational work when computer memory and storage space was scarce. However, compact representations such as those described form very rugged fitness landscapes which are not well suited to evolutionary search techniques. Structures are created from an initial "seed" or minimal construction, for example a compact spherical structure. The seed is then manipulated using a series of processes or transformations, for example stretching, shearing or bending. The structure would grow according to the transformations applied to it. Obviously, the transformations could be a predetermined sequence of actions which would always yield the same final structure given the same initial seed. Alternatively, the series of transformations applied could be environmentally sensitive resulting in forms which were also sensitive to their location. The idea of taking a geometrical form as a seed and transforming it using a series of processes to create complex structures is similar in many ways to the early work of Latham creating large morphological charts. Latham went on to develop his ideas into the "Mutator" system which he used to create organic artworks. Generalising the Reptile System Frazer has proposed a generalised version of the Reptile System to tackle more realistic building problems. Generating the seed or minimal configuration from design requirements automatically. From this starting point (or set of starting points) solutions could be evolved using artificial evolution. Quantifiable and specific aspects of the design brief define the formal criteria which are used as a standard fitness function. Non-quantifiable criteria, including aesthetic judgments, are evaluated by the user. The proposed system would be able to learn successful strategies for satisfying both formal and user criteria. In doing so the system would become a personalised tool of the designer. A personal assistant which would be able to anticipate aesthetic judgements and other criteria by employing previously successful strategies. Ultimately, this is a similar concept to Negroponte's "Architecture Machine" which he proposed would be computer system so personalised so as to be almost unusable by other people. The Universal State Space Modeller The Universal State Space Modeller is the basis of Frazer's current work. It is a system which can be used to model any structure, hence the universal claim in it's title. The datastructure underlying the modeller is a state space of scaleless logical points, called motes. Motes are arranged in a close-packing sphere arrangement, which makes each one equidistant from it's twelve neighbours. Any point can be broken down into a self-similar tetrahedral structure of logical points. Giving the state space a fractal nature which allows modelling at many different levels at once. Each mote can be thought of as analogous to a cell in a biological organism. Every mote carries a copy of the architectural genetic code in the same way that each cell within a organism carries a copy of it's DNA. The genetic code of a mote is stored as a sequence of binary "morons" which are grouped together into spatial configurations which are interpreted as the state of the mote. The developmental process begins with a seed. The seed develops through cellular duplication according to the rules of the genetic code. In the beginning the seed develops mainly in response to the internal genetic code, but as the development progresses the environment plays a greater role. Cells communicate by passing messages to their immediate twelve neighbours. However, it can send messages directed at remote cells, without knowledge of it's spatial relationship. During the development cells take on specialised functions, including environmental sensors or producers of raw materials. The resulting system is process driven, without presupposing the existence of a construction set to use. The datastructure can be interpreted in many ways to derive various phenotypes. The resulting structure is a by-product of the cellular activity during development and in response to the environment. As such the resulting structures have much in common with living organisms which are also the emergent result or by-product of local cellular activity. Primordial Architectural Soups To conclude, Frazer presents some of the most recent work done, evolving fundamental structures using limited raw materials, an initial seed and massive feedback. Frazer proposes to go further and do away with the need for initial seed and start with a primordial soup of basic architectural concepts. The research is attempting to evolve the starting conditions and evolutionary processes without any preconditions. Is there enough time to evolve a complex system from the basic building blocks which Frazer proposes? The computational complexity of the task being embarked upon is not discussed. There is an implicit assumption that the "superb tactics" of natural selection are enough to cut through the complexity of the task. However, Kauffman has shown how self-organisation plays a major role in the early development of replicating systems which we may call alive. Natural selection requires a solid basis upon which it can act. Is the primordial soup which Frazer proposes of the correct constitution to support self-organisation? Kauffman suggests that one of the most important attributes of a primordial soup to be capable of self-organisation is the need for a complex network of catalysts and the controlling mechanisms to stop the reactions from going supracritical. Can such a network be provided of primitive architectural concepts? What does it mean to have a catalyst in this domain? Conclusion Frazer shows some interesting work both in the areas of evolutionary design and self-organising systems. It is obvious from his work that he sympathizes with the opinions put forward by Kauffman that the order found in living organisms comes from both external evolutionary pressure and internal self-organisation. His final remarks underly this by paraphrasing the words of Kauffman, that life is always to found on the edge of chaos. By the "edge of chaos" Kauffman is referring to the area within the ordered regime of a system close to the "phase transition" to chaotic behaviour. Unfortunately, Frazer does not demonstrate that the systems he has presented have the necessary qualities to derive useful order at the edge of chaos. He does not demonstrate, as Kauffman does repeatedly, that there exists a "phase transition" between ordered and chaotic regimes of his systems. He also does not make any studies of the relationship of useful forms generated by his work to phase transition regions of his systems should they exist. If we are to find an organic architecture, in more than name alone, it is surely to reside close to the phase transition of the construction system of which is it built. Only there, if we are to believe Kauffman, are we to find useful order together with environmentally sensitive and thermodynamically open systems which can approach the utility of living organisms.
series	other
type	normal paper
last changed	2004/05/22 14:12

_id	ead7
authors	Gero, J.S. and Schnier, T.
year	1995
title	Evolving representations of design cases and their use in creative design
source	J.S. Gero, M.L. Maher and F. Sudweeks (eds), Preprints Computational Models of Creative Design , Key Centre of Design Computing, University of Sydney, pp. 343-368
summary	In case-based design, the adaptation of a design case to new design requirements plays an important role. If it is sufficient to adapt a predefined set of design parameters, the task is easily automated. If, however, more far-reaching, creative changes are required, current systems provide only limited success. This paper describes an approach to creative design adaptation based on the notion of creativity as 'goal oriented shift of focus of a search process'. An evolving representation is used to restructure the search space so that designs similar to the example case lie in the focus of the search. This focus is than used as a starting point to generate new designs.
series	other
email
last changed	2003/04/06 15:22

_id	cf2011_p024
id	cf2011_p024
authors	Tidafi, Temy; Charbonneau Nathalie, Khalili-Araghi Salman
year	2011
title	Backtracking Decisions within a Design Process: a Way of Enhancing the Designer's Thought Process and Creativity
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 573-587.
summary	This paper proposes a way computer sciences could contribute to stimulate the designer‚Äôs reflexive thought. We explore the possibility of making use of backtracking devices in order to formalize the designer‚Äôs thought process. Design, as a process of creating an object, cannot be represented by means of a linear timeline. Accordingly, the backtracking processes we are discussing here are not based on a linear model but rather on a non-linear structure. Beyond the notion of undoing and redoing commands within CAD packages, the backtracking process is seen as a way to explore and record several alternate options. The branches of the non-linear model can be seen as pathways made of sequential decisions. The designer creates and explores these pathways while making tentative moves towards an architectural solution. Within the design process, backtracking enables the designer to establish and act on a network of interrelated decisions. This notion is fundamental. It is quite obvious that information, in order to be meaningful, must occupy a specific place within an informational network. A data, separated from its context, is devoid of interest. By the same token, a decision takes on significance solely in combination with other decisions. In this paper, we examine what kinds of decisions are involved within a design process, how they are connected, and what could be the best ways to formalize the relationships. Our goal is to experiment ways that could enable the designer and his/her collaborators to get a clearer mental picture of the network of decisions aforementioned. The non-linear model can be seen as a graph structure. The user moves wherever he/she wants through the branches of the structure to establish the network of decisions or to get reacquainted with a previous design process. As a matter of fact, it can act in both ways: to reassess or to confirm a decision. On the one hand, the designer can go back to previous states, reconsider past choices, and eventually modify them. On the other hand, he/she can move forward and revisit a given sequence of decisions, so as to recapture the essence of a previous design process. It goes without saying that knowledge regarding the design process is constructed by the designer from his/her own experiences. Since the designer‚Äôs perception evolves as time goes by, the network of decisions constitutes a model that is continuously questioned and restructured. The designer does not elaborate solely an architectural object, but also an evolving model formalizing the way he/she achieved his/her aim. As Le Moigne (1995) pointed out, the model itself produces knowledge; afterwards, the designer can examine it so as to get a clearer mental picture of his/her own cognitive processes. Furthermore, it can be used by his/her collaborators in order to understand which thread of ideas led the designer to a given visual result, and eventually resume or reorient the design process. In addition to reflecting on the ideological implications inherent to this questioning, we take into account the feasibility of such a research project. From a more technical point of view, in this paper we will describe how we plane to take up the challenge of elaborating a digital environment enabling backtracking processes within graph structures. Furthermore, we will explain how we plane to test the first trial version of the new environment with potential users so as to observe how they respond to it. These experiments will be conducted in order to verify to what extend the methods we are proposing are able to i) enhance the designer‚Äôs creativity and ii) increase our understanding of designer‚Äôs thought process.
keywords	backtracking, design process, digital environments, problem space, network of decisions, graph structure.
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	6a3a
authors	Ekholm, A., Fridqvist, S. and Af Klercker, J.
year	1995
title	BAS.CAAD - Building and User Activity Systems Modelling for Computer-Aided Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1995.217
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 217-230
summary	In the early stages of the building design process not only building and site but also user activities and experiences are formed. This paper presents a development programme for CAAD where conceptual models of some fundamental characteristics of building, site and user organisation will be developed and implemented in a prototype CAAD-programme. The models are based both on empirical studies and an ontological Framework which is also used for organising the basic object structure of the prototype CAD program. The architectural design process has several characteristics which a CAAD-programme must support, e.g incremental determination of properties, change of scale and shift of focus. The research investigates how the design object and the user interface can be formed to serve this working method. One important field is to study the usefulness of the user organisation model for the brief and building management stages. The programming work for the prototypes is done with Smalltalk on Macintosh computers. The tests of the prototype includes spatial co-ordination of the three systems.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_28.htm
last changed	2022/06/07 07:55

_id	5af8
authors	Rosenfeld, Y.
year	1995
title	Automation of existing cranes: from concept to prototype
source	Automation in Construction 4 (2) (1995) pp. 125-138
summary	This paper describes the conversion of an existing full-scale 5-ton payload crane into a semi-automatic "Handling Robot". By its size, degrees of freedom, and mode of operation this crane resembles typical construction cranes, which can be enhanced in the same manner. The new control system allows operation of the crane in either a manual or a semi-automatic mode, and it can be taught to memorize up to 50 different benchmarks, i.e. particular points at the construction site, as well as safe routes among them. The major components of the system include: a programmable controller, three speed regulators, three encoders, several limit switches, a wireless remote control set, and a user-friendly MMI (Man-Machine-Interface). Most of the components can be installed externally in the vicinity of the crane's joints and inside the cabin, with minimal intervention in the original wiring. Following the physical retrofitting of the crane, a series of tests examined performance, accuracy, repeatability, and safety aspects. They demonstrated a 15-50% shortening of typical work cycles, high accuracy and repeatability, and a generally safer operation due to pre-tested paths and smoother movements with less sway and swing of the load.
keywords	Construction Automation; Construction Cranes; Robotics; Machine Control
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:35

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	8378
authors	Arlati, Ezio
year	1995
title	Patriarch: A Hypermedia Environment for the Support of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1995.187
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 187-198
summary	This paper reports on current research in the field of architectural design and knowledge- based systems, through the conception and implementation of two software tools operating as a part of an integrated hypermedia environment denominated PatriArch. Main concern of this set of tools operating in PatriArch is the support of design since the very beginning, in that phase of not yet correctly explored or interpretated constraints and of scarcely specified goals, in which an initial solution model - provisionally composed of fragments of supposed fitting ideas - for the design theme has to take place. The creative activity of the designer is assumed as an 'intentional planning activity' that represents the acquired level of knowledge of the network of connections defining the nature, function, shape in the space etc. of the increasingly integrated solution-model: the final design will be an evolution of this - and other competitive and concurrent - models. PatriArch is meant to be the environment containing and allowing the representation of this evolution through its ability of linking the fragments of designers' knowledge, supported by an integrated relational data base: Sysinfo. These works were conceived inside an educational software development program for architecture students.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_25.htm
last changed	2022/06/07 07:54

_id	b914
authors	Asanowicz, Aleksander and Asanowicz, Katarzyna
year	1995
title	Designing, CAD and CAD
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 181-192
summary	The general aim of our discussion is to analyze what has been changed in design process according to introducing the computers technology. For the better understanding of the design process evolution, we should precisely define start point - the traditional design process.Let's treat it as an iteration game between a designer and user. If we assume that the designing base is a reductive strategy, we can define six stages of it: 1.) To define a need; 2.) To formulate a task; 3.) To synthesize a design proposals; 4.) To analyze and optimize; 5.) To make a presentation. // The last stage - the presentation of designing proposals is the main factor of using computers in design process and creating definition of CAD as Computer Aided Drafting. According to this interpretation CAD has included four groups of activities: A.) Geometrical modelling; B.) Analysis; C.) Revision and estimation of design proposals; D.) Technical drawing preparing. // Unfortunately it has no connections with another meaning of CAD - Computer Aided Design because concerns every stage of design process except of creation of architectural form. On the other hand, computer enables us to improve the design process by permanent perception of designing forms and dynamic control over the transforming structure. Nowadays thanks to full-function sketching workstation and software like Fractal Design Painter a computer can be useful from the moment when the first line is drawing. It is possible, that the new generation of CAD software - CAD with Personality which connects computer models with picture transformation will enable CAD to be Computer Aided Design.
series	plCAD
email
last changed	2000/01/24 10:08

_id	30d7
authors	Bartnicka, Malgorzata
year	1995
title	Childishly Honest Associate of the Trickery
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 209-219
summary	Perspective is a method of presentation of 3- dimensional space on the 2-dimensional surface. It can only approximately express the complexity of the authentic perception of reality. During the centuries canons of presentation varied in different epochs. It is quite possible that conventions of presentation considered today as exact expressions of reality may seem for the future generations as untrue as the ancient Egypt paintings seem for us. Our mind plays the major role in all kinds of presentation. During the whole life we learn to perceive the surrounding reality. We have formed also ability to ,see" the perspective. The linear perspective is not so easy in perception without factors of colour and light. These factors play a very important role in perception of the distance. The perception of perspective is not always unmistakable. Introduction of light and shadow is one of the measures to limit the ambiguity. Objects shown in perspective with appropriately chosen colouring and light-and-shade effects reveal impression of the distance inside the flat picture. Illusions of perspective are most astonishing when one can assume deep-rooted expectations and suppositions of the addressee. The computer monitor, like the picture, has only one plane on which our project can be presented. The major feature of architecture programs is both the possibility of creating various architecture spaces and the possibility to examine how (in our opinion) the created space would affect the addressee. By means of computer programs we are able to generate drawings and objects of two kinds: first - being the ideal projection of reality (at least in the same measure as the photograph), and the second - being the total negation of perspective rules. By means of CAD programs enabling 3-dimensional job we can check how all sorts of perspective tricks and artifices affect our imagination. The program cooperates with us trying to cheat the imperfect sense of sight. The trickeries can be of various type, starting from play of lights, through the elements changing the perception of perspective, and terminating with objects totally negating the rules of sound construction of solids. The knowledge contained in these programs is an encyclopaedic recapitulation of all sorts of achievements in the field of perspective and application of colour and light effects. All that remains to the users is to exploit this tremendous variety of capabilities.
series	plCAD
last changed	2000/01/24 10:08

_id	e100
authors	Bermudez, Julio and King, Kevin
year	1995
title	Architecture in Digital Space: Actual and Potential Markets
doi	https://doi.org/10.52842/conf.acadia.1995.405
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 405-423
summary	As both the skepticism and 'hype' surrounding electronic environments vanish under the weight of ever increasing power, knowledge, and use of information technologies, the architectural profession must prepare for significant expansion of its professional services. To address the issue, this paper offers a survey of the professional services architects and designers do and may provide in digital space, and who the potential clients are. The survey was conducted by interviews with software developers, gaming companies, programmers, investigators, practicing architects, faculty, etc. It also included reviews of actual software products and literary research of conference proceedings, journals, books and newspapers (i.e. articles, classified ads, etc.). The actual and potential markets include gaming and entertainment developments, art installations, educational applications, and research. These markets provide architects the opportunity to participate in the design of 3D gaming environments, educational software, architecture for public experience and entertainment, data representation, cyberspace and virtual reality studies, and other digital services which will be required for this new world. We will demonstrate that although the rapidly growing digital market may be seen by some to be non-architectural and thus irrelevant to our profession, it actually represents great opportunities for growth and development. Digital environments will not replace the built environment as a major architectural market, but they will significantly complement it, thus strengthening the entire architectural profession.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	c6bb
authors	Bottelli, Valeria and Fogh, Christian
year	1995
title	Galathea: A Case-Based Planning Tool for Knowledge Navigation in the Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.1995.427
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 427-436
summary	We report on an on-going Ph.D. research aimed at the analysis of the nature of process knowledge in architectural design and the development of a conceptual model for a case-based navigation tool for its support. We describe architectural design from a process viewpoint and assume it as a form of intentional planning, leading from an initial state configuration toward a desired situation, by means of an incremental specification of goals, constraints and involved variables. We consider the very essence of design and of the specific professional skill characterising designers as the continual recursive transformation of the initial solution model, in order to map the desired state onto the enacted one and the capability to govern a number of continually changing variables in this direction. On the basis of this general concept of the design process, we describe the model of Galathea, a case-based planning tool, aimed at progressively representing the enlarging space of acquired knowledge, and at supporting the designer´s central role in the management of the design process.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_50.htm
last changed	2022/06/07 07:54

_id	ae10
authors	Branzell, Arne
year	1995
title	Management of Sequential Space Experiences
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	In this paper a way of combining endoscopy with architectural notations will be presented. Endoscopy is regarded as a tool to visualize sequences from a model in order to demonstrate how the environment will look like from the pedestrian’s or driver’s view. But while using it, its limitations must be considered. The model is mostly too small to present distant landmarks, districts, nodes and edges of importance. And most important, experience of space is not only visual. It is a complex process where many aspects must be taken into consideration. These aspects can be presented with architectural notations on physical drawings of the situation. The resulting “storyboard” is most useful in analyzing the situation and making better solutions possible.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	276c
authors	Breen, Jack
year	1995
title	Dynamic Perspective: The Media Research Programme
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	This paper focuses on the Research Programme of the Media Sector at the Faculty of Architecture, Delft University of Technology. The media research objectives for the coming years have been brought together with an overall project: “Dynamic Perspective”. The “dynamic” quality may be interpreted both as movement (visual displacement and registration) and as change (the effects of different options). The four projects which together make up this research programme deal with perception (understanding) and conception (designing and imaging) of urban space: “the architecture of the city”. Specific aspects are the effects of primary and secondary spatial boundaries and the systematic structuring of simulation of visual information. The programme will further concentrate on the development and implementation of relevant techniques (besides “traditional” ones such as the drawing and the architectural model, on multimedia techniques such as endoscopy, computer visualization and development of virtual reality systems), both in education and in design practice. By means of analysis, the creation of visual models of choice and the setting up of experiments, the programme aims at the furthering of theoretical knowledge and at acquiring better insights into the effects of design decisions at an urban level, both for designers and for other participants in the design process. Further development of existing laboratory facilities towards a comprehensive Design Simulation Laboratory is an important aspect of the programme. Within the media research process the Aspern location master plan has been considered as a case study, the findings of which will be presented separately in the workshop sessions.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	c05a
authors	Bridges, Alan
year	1995
title	Design Precedents for Virtual Worlds
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 293-302
summary	The usual precedents cited in relation to Cyberspace are William Gibson's book "Neuromancer" and Ridley Scott's film. "Bladerunner". This paper argues that, whilst literature and film are appropriate precedents, there are more suitable sources to refer to when designing virtual worlds. The paper discusses the use of computer modelling in exploring architectonic concepts in three-dimensional space. In doing so it draws on the philosophy of simulation and gives examples from alternative film and literature sources but concludes that one of the most appropriate metaphors is widely available in the form of the television soap opera.
keywords	Design Simulation, Space, Time, Virtual Reality
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	00f4
authors	Brown, Andre G.P. and Knight, Mike
year	1995
title	An Integrated Hypermedia Project
doi	https://doi.org/10.52842/conf.ecaade.1995.111
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 111-116
summary	This paper describes how Hypermedia can be used as unifying tool, marrying together many strands of work related to architectural design and CAD. The project which we describe was undertaken with fourth year students at the University of Liverpool and is entitled the Electronic City. It is founded on the premise of assembling a Hypermedia package which describes the city and its architecture to a lay person. There are two strands to the project, the Hypermedia strand and a graphics/CAD strand. At the end the task was then to stitch the strands together to produce a common, coherent Hypermedia package. At the end of the project we expect that the students will have developed skills and an appreciation of: (-) the architecture and history of the city (-) the design of Hypermedia interfaces (-) the design of Information structures (-) three dimensional modelling and rendering
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_15.htm
last changed	2022/06/07 07:54

For more results click below: