Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 391

Reformat results as: short short into frame detailed detailed into frame

_id	95b9
authors	Devernay, F. and Faugeras, O.
year	1995
title	Automatic Calibration and Removal of Distortion from scenes of structured environments
source	Proceedings of the SPIE Conference on Investigate and Trial Image Processing, 2567, SPIE, San Diego, CA, July 1995
summary	Most algorithms in 3-D Computer Vision rely on the pinhole camera model because of its simplicity, whereas video optics, especially low-cost wide-angle lens, generate a lot of non-linear distortion which can be critical. To ønd the distortion parameters of a camera, we use the following fundamental property: a camera follows the pinhole model if and only if the projection of every line in space onto the camera is a line. Consequently, if we ønd the transformation on the video image so that every line in space is viewed in the transformed image as a line, then we know how to remove the distortion from the image. The algorithm consists of ørst doing edge extraction on a possibly distorted video sequence, then doing polygonal approximation with a large tolerance on these edges to extract possible lines from the sequence, and then ønding the parameters of our distortion model that best transform these edges to segments. Results are presented on real video images, compared with distortion c...
series	other
last changed	2003/04/23 15:14

_id	a84e
authors	De Grassi, Mario and Giretti, Alberto
year	1995
title	Applying Formal Methods to Multimedia Design Aid
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 283-296
doi	https://doi.org/10.52842/conf.ecaade.1995.283
summary	In the last decade we assisted at an evolution of computer aided design systems from drafting, calculation and simulation utilities toward systems able to support the conceptual phase of the design process. Systems supporting conceptual design use knowledge about the design domain and assume a will defined model of the design activity. Their computational framework is usually built by means of a set of representational schemata which lack a formal semantics. This aspect causes a limitation on the applicability of their computational framework to different domains. In this paper we propose a formal knowledge representation language, that has been defined in order to represent the structural relationships of domain knowledge. On the basis of language structure we propose a number of inferences tailored to case-based conceptual design aiding. Finally we apply the representational framework to the implementation of a computational architecture for conceptual design aiding that integrates multimedia representation of design cases with symbolic information processing. The architecture combines a knowledge representation server and a multimedia server. The knowledge representation server processes both domain knowledge and design experiences according to the Case Based Reasoning paradigm. The multimedia server produces the required case representation.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_34.htm
last changed	2022/06/07 07:55

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	27b5
authors	Dießenbacher, Claus and Rank, Ernst
year	1995
title	A Multimedia Archaeological Museum
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 13-20
doi	https://doi.org/10.52842/conf.ecaade.1995.013
summary	This paper will present a project, which was first initiated in 1994 as a graduate students seminar and is now being continued as a research project in a cooperation of computer scientists, architects and archaeologists. An ancient roman city (Colonia Ulpia Traiana near todays Xanten in Germany) has been reconstructed, using various levels of abstraction. On the coarsest level, a 3D-model of the whole city was established, distinguishing between different historical periods of the city. The second level picks places of special interest (temples, the forum, the amphitheater, the townbaths etc.) and reconstructs these buildings or groups of buildings. On the finest level important interior parts or functional details like the Hypocaustae in the town-baths are modelled. All reconstructions are oriented as close as possible to results from excavations or other available documents. All levels of the 3D-model have been visualized using photorealistic images and sequences of video animations. The 3D model is integrated into a multimedia environment, augmenting the visualization elements with plans of the city and individual buildings and with text documents. It is intended, that parts of the outlined system will be available at the site of the ancient city, where today a large public archaeological park is located.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_2.htm
last changed	2022/06/07 07:55

_id	2e3b
authors	Kvan, Thomas and Kvan, Erik
year	1997
title	Is Design Really Social
source	Creative Collaboration in Virtual Communities 1997, ed. A. Cicognani. VC'97. Sydney: Key Centre of Design Computing, Department of Architectural and Design Science, University of Sydney, 8 p.
summary	There are many who will readily agree with Mitchell’s assertion that “the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process.” [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants; that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided; therefore; must permit the best communication and the best social interaction. We think it essential to examine the foundations and assumptions on which software and environments are designed to support collaborative design communication. Of particular interest to us in this paper is the assumption about the “social” nature of design. Early research in computer-assisted design collaborations has jumped immediately into conclusions about communicative models which lead to high-bandwidth video connections as the preferred channel of collaboration. The unstated assumption is that computer-supported design environments are not adequate until they replicate in full the sensation of being physically present in the same space as the other participants (you are not there until you are really there). It is assumed that the real social process of design must include all the signals used to establish and facilitate face-to-face communication; including gestures; body language and all outputs of drawing (e.g. Tang [1991]). In our specification of systems for virtual design communities; are we about to fall into the same traps as drafting systems did?
keywords	CSCW; Virtual Community; Architectural Design; Computer-Aided Design
series	other
email
last changed	2002/11/15 18:29

_id	23fc
authors	Martens, B., Voigt, A., Schmidinger, E. and Linzer, H.
year	1995
title	The Effective Use of Multimedia and Telematics in Planning and Design
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 75-82
doi	https://doi.org/10.52842/conf.ecaade.1995.075
summary	Provided multimedia is regarded as the connection of various media for achieving specific goals, the objectives are to he defined very precisely. In architecture, urban and regional planning any confrontation with information in terms of graphics predominantly tends to be represented by visual communication. Thus complex spatial accounts of the facts calling for universally understood representations are conveyed. Despite the fact that presentations have so far mostly appeared as "mixed media" in computer-assisted spatial planning the initial fascination has somewhat faded away. This contribution is to issue concrete working experience with (inter-) national videoconferences via Internet and distributed modelling. Finally, definite solution approaches for the integration of video-conferencing in a simulation- and computer-assisted planning process utilizing multimedia are demonstrated.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_10.htm
last changed	2022/06/07 07:59

_id	0b30
authors	Matalasov, M.
year	1995
title	Optimal Choice of the Equipment Depending on the Requirements of Educational Projecting
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	The means of architectural endoscopy play an important role in teaching architects, making it possible to form effectively spatial perception. However, the high price of the up-to-date equipment requires its optimal implementation. On the early stages of training architectural students it is reasonable to use sufficiently simple devices: telemaketoscope connected with a 386DX-computer and printer to get static video series. More complicated educational projects demand studying the object in movement, so a VHS or S-VHS VCR is added to the system. And at last one most employ complex system, comprising minimum 486DX-computer, videostudio and special modernized camcorder is intended for real architectural projects. Such systems make it possible to combine the projected object with the real environment, executing the object itself either in the form of a computer 3D-model or in the form of scale model. The examples of training and real works, mentioned in the paper, illustrate the efficiency of employing proposed system in various fields of architectural designing.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	a701
authors	Verbeke, Johan and Van Acker, Stefan
year	1995
title	The Use of Computers in Urban Design Projects at Sint-Lucas Brussels-Ghent
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 243-246
doi	https://doi.org/10.52842/conf.ecaade.1995.243
summary	Since a few years we use computers with the specific aim to augment the creative energy in the design studio We discuss the results of an urban design project in which the use of 'multi-media' (abstract space model, scanned images, sound, real video and metaphors) was important in order to try to present the concept
series	eCAADe
type	normal paper
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Home.htm
last changed	2022/06/07 07:58

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.1995.139
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	c078
authors	Allegra, M, Fulantelli, G. and Mangiarotti, G.
year	1995
title	A New Methodology to Develop Hypermedia Systems for Architecture History
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 43-52
doi	https://doi.org/10.52842/conf.ecaade.1995.043
summary	This paper illustrates a research project concerning the analysis of architectural works through a comparative study based on hypermedia tools; by exploring the hypermedia, users can find the main subjects relative to the "method " of architectural planning. The use of multimedia in architecture allows the integration in a single system of different types of information which are necessary for the description of a work. texts, designs, photos and sounds. In addition, the hypertext information structure allows the direct intervention on analyzed projects, by pointing out the more important themes and their relationships. Users have the opportunity to immerse themselves in hypermedia and choose the subject to navigate through on each occasion. Our research project aims at developing a prototype concerning two architects. I.L.Kahn and F.L. Wright. The development methodology is based on the key role played by the components of architectonic works, thus allowing users to compare them in a simple and correct way. The methodology used in this work can be extended to other architects or periods, by simply changing the possibility of navigation, i.e. by changing the reading keys.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_6.htm
last changed	2022/06/07 07:54

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
doi	https://doi.org/10.52842/conf.ecaade.1995.003
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	df4b
authors	Angulo Mendivil, Antonieta Humbelina
year	1995
title	On the Conceptual Feasibility of a CAAD-CAAI Integrated Decision Support System: A Computer Aided Environment for Technical Decision Making in Architecture
source	Delft University of Technology
summary	This document addresses two questions: What are the ultimate means of design support we can offer to the architect, and how can we devise them? We are not the first ones to address these questions, neither the first ones to point our finger in the direction of Decision Support Systems for such purposes. Nevertheless, we may be among those scholars that understanding 'Decision Support" in terms of "Learning Support", are willing to explore the implications that such an understanding assumes for the concept of Decision Support Systems. Our exploration in such regards has shown us that knowledge application and knowledge acquisition cycles describe a continuum, and that such cycles, encapsulated in our "Practice Based Learning" and "Continuing Professional Development" dynamics are present in both our instructional and professional environments. From such a perspective, our scope regarding feasible Decision Support Systems is not restricted to the use of CAAD instrumental resources, but expanded into a context of CAAD-CAAI integration. Throughout this document we conceive a system that blends CAAD and CAAI resources looking forward to the creation of a Support Environment that seeks to motivate a reflective attitude during design, in such a way, upgrade our capability for acquiring as well as applying knowledge in design. In instrumental terms, this document explains how mainstream CAAD developments in the field of "Intelligent Front End Technology" and CAAI developments in the field of "Knowledge-based Curricular Networks" can complement each other in the establishment of a Decision Support System of trans-environmental relevancy. As an application framework for the concept and instrumental base described above, this document presents an image of the kind of decision-making model that it will intend to support, the kind of task support model it will look forward to implement, and the kind of general instrumental layout it will require. On the basis of such an instrumental layout, the system that is hereby outlined can be regarded as a "CAAD-CAAI Integrated", "Intelligent", and "User-Oriented" Interface System.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	8378
authors	Arlati, Ezio
year	1995
title	Patriarch: A Hypermedia Environment for the Support of Architectural Design
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 187-198
doi	https://doi.org/10.52842/conf.ecaade.1995.187
summary	This paper reports on current research in the field of architectural design and knowledge- based systems, through the conception and implementation of two software tools operating as a part of an integrated hypermedia environment denominated PatriArch. Main concern of this set of tools operating in PatriArch is the support of design since the very beginning, in that phase of not yet correctly explored or interpretated constraints and of scarcely specified goals, in which an initial solution model - provisionally composed of fragments of supposed fitting ideas - for the design theme has to take place. The creative activity of the designer is assumed as an 'intentional planning activity' that represents the acquired level of knowledge of the network of connections defining the nature, function, shape in the space etc. of the increasingly integrated solution-model: the final design will be an evolution of this - and other competitive and concurrent - models. PatriArch is meant to be the environment containing and allowing the representation of this evolution through its ability of linking the fragments of designers' knowledge, supported by an integrated relational data base: Sysinfo. These works were conceived inside an educational software development program for architecture students.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_25.htm
last changed	2022/06/07 07:54

_id	2a49
authors	Asanowicz, Aleksander
year	1995
title	Multimedia Versus Ugliness of the City
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 389-394
doi	https://doi.org/10.52842/conf.ecaade.1995.389
summary	This paper presents a method of using multimedia techniques in order to solve problems of visual pollution of city environment. It is our observation that human - inducted degradation of city environmental results not only from neglect and vandalism but also from well - intentioned but inappropriate preservation actions by uninformed designers and local administrations. Very often, a local municipality administration permit to erect an ugly, bad-fitting surroundings houses. It is usually connected with lack of informations about certain areas of a city, its features, characteristic and about present and earlier buildings. Therefore there was an experiment - a complex programme aiding the decision process as a part of the CAMUS system (Computer Aided Management of Urban Structure) which is created at Faculty of Architecture TUB. One of the integral parts of it is a block, which has been called "How would it be like to be nice around". One of the basic elements of that system is a town data base consisting of the independent knowledge - based systems, working together in a distributed computing environment. City administration will have access to each information from multimedia data-base. Multimedia is also having and impact on the effectiveness of decision process in urban planning and in our fight with ugliness of the city.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_46.htm
last changed	2022/06/07 07:54

_id	aab6
authors	Bermudez, Julio
year	1995
title	Designing Architectural Experiences: Using Computers to Construct Temporal 3D Narratives
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 139-149
doi	https://doi.org/10.52842/conf.acadia.1995.139
summary	Computers are launching us into a representational revolution that fundamentally challenges the way we have hitherto conceived and practiced architecture. This paper will explore one of its fronts: the simulation of architectural experiences. Today's off-the-shelf softwares (e.g. 3D modeling, animations, multimedia) allow us for first time in history to depict and thus approach architectural design and criticism truly experientially. What is so appealing about this is the possibility of shifting our attention from the object to the experience of the object and in so doing reconceptualizing architectural design as the design of architectural experiences. Carrying forward such a phenomenological proposition requires us to know (1) how to work with non-traditional and 'quasi-immersive' (or subject-centered) representational systems, and (2) how to construct temporal assemblages of experiential events that unfold not unlike 'architectural stories'. As our discipline lacks enough knowledge on this area, importing models from other fields appears as an appropriate starting point. In this sense, the narrative arts (especially those involved with the temporal representation of audio-visual narratives) offer us the best insights. For example, principles of cinema and storytelling give us an excellent guidance for designing architectural experiences that have a structuring theme (parti), a plot (order), unfolding episodes (rhythm), and special events (details). Approaching architecture as a temporal 3D narrative does transform the design process and, consequently, its results. For instance, (1) phenomenological issues enter the decision making process in an equal footing to functional, technological, or compositional considerations; (2) orthographic representations become secondary sources of information, mostly used for later accurate dimensioning or geometrization; (3) multi-sensory qualities beyond sight are seriously considered (particularly sound, texture, and kinesthetic); etc.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	276c
authors	Breen, Jack
year	1995
title	Dynamic Perspective: The Media Research Programme
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	This paper focuses on the Research Programme of the Media Sector at the Faculty of Architecture, Delft University of Technology. The media research objectives for the coming years have been brought together with an overall project: “Dynamic Perspective”. The “dynamic” quality may be interpreted both as movement (visual displacement and registration) and as change (the effects of different options). The four projects which together make up this research programme deal with perception (understanding) and conception (designing and imaging) of urban space: “the architecture of the city”. Specific aspects are the effects of primary and secondary spatial boundaries and the systematic structuring of simulation of visual information. The programme will further concentrate on the development and implementation of relevant techniques (besides “traditional” ones such as the drawing and the architectural model, on multimedia techniques such as endoscopy, computer visualization and development of virtual reality systems), both in education and in design practice. By means of analysis, the creation of visual models of choice and the setting up of experiments, the programme aims at the furthering of theoretical knowledge and at acquiring better insights into the effects of design decisions at an urban level, both for designers and for other participants in the design process. Further development of existing laboratory facilities towards a comprehensive Design Simulation Laboratory is an important aspect of the programme. Within the media research process the Aspern location master plan has been considered as a case study, the findings of which will be presented separately in the workshop sessions.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ebc4
authors	Brusasco, Pio Luigi and Caneparo, Luca
year	1995
title	Coordinative Model of Design and Building Process
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 297-306
doi	https://doi.org/10.52842/conf.ecaade.1995.297
summary	The paper presents a coordinative model of the design and building process. It is divided into three main sections. The first presents a brief formalization of the model and of its representations, respectively the argumentative, rhetorical and semantic graphs. The second introduces the framework adopted for the development of the model, and describes the two main sub- systems: communicative and coordinative. The third presents the computer implementation, based on the Client,/Client model for the communicative system and on the Client/Server for the coordinative system.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_36.htm
last changed	2022/06/07 07:54

For more results click below: