Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 482

Reformat results as: short short into frame detailed detailed into frame

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	934f
authors	Gross, M.D.
year	1996
title	The Electronic Cocktail Napkin – a computational environment for working with design diagrams
source	Design Studies, 17 (1), pp. 53-69
summary	The Electronic Cocktail Napkin is an experimental computer-based environment for sketching and diagramming in conceptual design. The project's goal is to develop a computational drawing environment to support conceptual designing in a way that leads smoothly from diagrams to more formal and structured representations of schematic design. With computational representations for conceptual designs, computer-supported editing, critiquing, analysis, and simulation can be employed earlier in the design process, where it can have a greater impact on outcomes. The paper describes the Electronic Cocktail Napkin program - its recognition and parsing of diagrams and management of spatial constraints, its drawing environment, and two experimental query-by-diagram schemes for retrieving information from architectural databases.
series	journal paper
email
last changed	2003/04/23 15:50

_id	ddssup9617
id	ddssup9617
authors	Sidjanin, Predrag
year	1996
title	A computer simulation model of the TU district of Delft with use of the GIS and VR
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	One of the big problems for GIS users is a luck of such an visual presentation of data which will easily transform them into a spatial image. Existing systems based on Human-Computer-Interfaces (Ha) have limitations and for this reason it is necessary to discover new explicit way of spatial data presentation and manipulation. Virtual Reality technology with its specificity and characteristics based on spatial displaying and multisensory interactivity, give to VR users a new promising possibility to solve GIS limitations. This research is an exploration of integration of GIS and yR. VR is a kind of production of a simulation of a real world, and GIS-databases contain data that describe this world, therefore a success of combination of both technologies is very probable. This research shows possibilities for creating a virtual GIS world in which is possible to handle, explore, analyse and present spatial data by free navigation through a virtual model. The virtual model of Delft University of Technology's Campus presents Virtual Reality as a new type of 3D interface for GIS and demonstrates some basic GIS functions in virtual environment. It has been created by importing of GIS databases into VR system. Virtual model is based on geometric and attributive data. GIS functionality is enabled by 3D interface objects, that symbolically and semantically represents GIS functions. Their use should initiate intuitive users action. This application combines spatial data, user interface, text, sound, thematic data and virtual hypertext. Virtual model enables the use of quantitative and qualitative information. The results of the research can be implemented to support design strategies ax! decision making in the field of physical and urban planning.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9601
id	ddssup9601
authors	Aoke, Yoshitsugu and Muraoka, Naoto
year	1996
title	An optimization method of the facility location by genetic algorithm
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In planning of community-facilities, it is important to decide the facility location to provide the effective service for residents. The behavior of residents using the facility and the evaluation methods of the location have been studied. But, finding the optimum location is very hard in actual planning because the volume of calculation depends on the number of feasible locating points of facilities. To conquer the difficulty of searching the optimum location, we propose an optimization method using Genetic Algorithm. An alternative of location is expressed by a chromosome. Each chromosome consists of genes, and each gene expresses a located zone of the facility. We gave definitions of genetic procedures; crossing-over, mutation and selection. Alternatives of the facility location are generated by these genetic procedures like as life evolution. For each alternative, the behaviors of users are estimated by a spatial-interaction model, and the facilities that residents in each place choose are determined. The effectiveness of the location is measured by a total sum of distances between the facility and the user. After the confirmation of the effectiveness of our method by applying on ideal example problems, we applied it on the actual problem in Japanese town. By this method we could find the optimum location in about one-third time and effort as compared with the ordinal method.
series	DDSS
last changed	2003/11/21 15:15

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
doi	https://doi.org/10.52842/conf.ecaade.1996.041
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c872
authors	Beliveau, Y.J., Fithian, J.E. and Deisenroth, M.P.
year	1996
title	Autonomous vehicle navigation with real-time 3D laser based positioning for construction
source	Automation in Construction 5 (4) (1996) pp. 261-272
summary	Autonomous Guided Vehicles (AGVs) are a way of life in manufacturing where navigation can be done in a structured environment. Construction is an unstructured environment and requires a different type of navigation system to deal with three dimensional control and rough terrain. This paper provides a review of navigation systems that utilize dead-reckoning in conjunction with absolute referencing systems such as beacon-based systems, and vision and mapping based system. The use of a real-time laser based technology is demonstrated as a new form of navigation. This, technology does not rely on dead reckoning. The paper outlines the issues and strategies in guiding an autonomous vehicle utilizing only the laser-based positioning system. Algorithms were developed to provide real-time control of the AGV. The laser based positioning system is unique in that it provides three dimensional position data with five updates per second. No other system can provide this level of performance. This allows for control of end effectors and autonomous vehicles in complex and unstructured three dimensional environments. The use of this new type of navigation makes possible the automation of large complex assemblies in rough terrain such as construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	275b
authors	Chase, Scott C.
year	1996
title	Design Modeling With Shape Algebras and Formal Logic
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 99-113
doi	https://doi.org/10.52842/conf.acadia.1996.099
summary	A new method of describing designs by combining the paradigms of shape algebras and predicate logic representations is presented. Representing shapes and spatial relations in logic provides a natural, intuitive method of developing complete computer systems for reasoning about designs. The advantages of shape algebra formalisms over more traditional representations of geometric objects are discussed. The method employed involves the definition of a large set of high level design relations from a small set of simple structures and spatial relations. Examples in architecture and geographic information systems are illustrated.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	18bc
authors	Clay, Sharon and Wilhelms, Jane
year	1996
title	Put: Language-Based Interactive Manipulation of Objects
source	IEEE Computer Graphics and Applications
summary	Describing a scene to a computer is an inherent task of computer graphics applications. Modeled scenes are typically built with direct placement techniques or specialized scripting languages. The scene description task could be greatly eased if natural language were an interactive control option. However, natural language understanding is notoriously difficult for computers. This difficulty is exacerbated in the case of computer graphics by the need for geometric output, not just "conceptual understanding" or high-level inferencing. General text-understanding techniques have not been successfully applied to scene generation. Typically, a few task-specific commands, such as "walk," are implemented as an ad-hoc collection of procedures. Our approach aims to separate the expressive power of fundamental natural concepts from the difficult task of text understanding. We are developing a 3D object placement system based on a combination of natural commands and interactive techniques. Guided by research in cognitive linguistics, we use basic spatial relationships--such as in, on, and at--and fundamental scene parameters--such as viewer location and object dimensionality--to identify regions of placement for objects in a scene. These natural commands can be used to quickly prototype a complex scene and constrain object placement.
series	journal paper
last changed	2003/04/23 15:14

_id	911c
authors	Darken, Rudolph P.
year	1996
title	Wayfinding in Large-Scale Virtual Worlds
source	George Washington University
summary	As important as navigation is to human performance in virtual worlds, it is an often overlooked problem in the design process. This dissertation reports an experiment intended to show that real-world wayfinding and environmental design principles are effective in designing virtual worlds which support skilled wayfinding behavior. The design principles are adapted from both the cognitive psychology literature and urban and architectural design methodologies. There are two categories of design principles; those that guide the organizational structure of the environment, and those that guide the use and presentation of maps. The study measures subject performance on a complex searching task in a number of virtual worlds with differing environmental cues. The environments are extremely large and consist of open sea, land, and ships which are used as targets for search tasks. The worlds are augmented with either a radial grid, a map, both, or neither. For each trial, the subject's viewpoint position and orientation was sampled approximately once per second. A verbal protocol with accompanying video was used to elicit information about the search strategies employed. A map drawing exercise followed each trial in order to gain insight to the subject's spatial knowledge (i.e. cognitive map) of the environment. The results show that subjects in the treatment without any additional cues were often disoriented and had extreme difficulty completing the task. The grid was shown to provide superior directional information but both treatments using the map were superior overall due to the geocentric perspective provided. Behaviors associated with each treatment indicate that the cues had a strong effect on both search performance and search strategy. The results suggest that users of large-scale virtual worlds require structure in order to effectively navigate. Augmentations such as direction indicators, maps, and path restriction can all greatly improve both wayfinding performance and overall user satisfaction.
series	thesis:PhD
email
more	http://www.seas.gwu.edu/~sibert/darken/publications/Dissertation_95/thesis.html
last changed	2003/02/12 22:37

_id	ddssar9613
id	ddssar9613
authors	de Groot, E.H. and Louwers, F.H.
year	1996
title	The TIE-system, a KBS for the Evaluation of Thermal Indoor office Environments
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	A Knowledge-Based System [KBS] for the evaluation of Thermal Indoor office Environments [TIE] (in the Netherlands) was the product of a one-year project, undertaken by researchers of the Physical Aspects of the Built Environment group [FAGO] in cooperation with the Knowledge-Based System Section of the TNO-Building & Construction research Institute in Delft. The objective of the project was to develop a KBS capable of evaluating thermal indoor environments of existing or proposed office buildings designs. The approach used in this study was based on a traditional method of predicting thermal sensation by calculating Fanger's 'Predicted Mean Vote' [PMV]. PMV is influenced by four environmental parameters of a room: air temperature, radiant temperature, air velocity and relative humidity, and by two personal parameters of the employees: metabolic rate and clothing insulation. The knowledge required to determine these six parameters was placed in KBS-databases and tables using a KBS-building tool called Advanced Knowledge Transfer System [AKTS]. By questioning the user, the TIE-system is capable of determining the PMV for a particular office room. The system also provides conclusions and advice on improving the thermal comfort. The TIE-system was a pilot-study for the long-term Building Evaluation research project, being undertaken at FAGO, that examines in all aspects of office building performance, and in which KBS may play a major pole.
series	DDSS
last changed	2003/08/07 16:36

_id	9a0d
authors	Debevec, P.E., Taylor, C.J. and Malik, J.
year	1996
title	Modeling and rendering architecture from photographs: a hybrid geometry- and image-based approach
source	SIGGRAPH'96, New Orleans, Louisiana
summary	We present a new approach for modeling and rendering existing architectural scenes from a sparse set of still photographs. Our modeling approach, which combines both geometry-based and imagebased techniques, has two components. The first component is a photogrammetricmodelingmethodwhich facilitates the recovery of the basic geometry of the photographed scene. Our photogrammetric modeling approach is effective, convenient, and robust because it exploits the constraints that are characteristic of architectural scenes. The second component is a model-based stereo algorithm, which recovers how the real scene deviates from the basic model. By making use of the model, our stereo technique robustly recovers accurate depth from widely-spaced image pairs. Consequently, our approach canmodel large architectural environmentswith far fewer photographs than current image-based modeling approaches. For producing renderings, we present view-dependent texture mapping, a method of compositing multiple views of a scene that better simulates geometric detail on basic models. Our approach can be used to recover models for use in either geometry-based or image-based rendering systems. We present results that demonstrate our approach's ability to create realistic renderings of architectural scenes from viewpoints far from the original photographs.
series	other
last changed	2003/04/23 15:50

_id	acb9
authors	Do, Ellen Yi-Luen
year	1996
title	The Right Tool at the Right Time - Drawing as an Interface to Knowledge Based Design Aids
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 191-199
doi	https://doi.org/10.52842/conf.acadia.1996.191
summary	Designers use different symbols and diagrams in their drawings to explore alternatives and to communicate with each other. Therefore, a useful design environment should attempt to infer the designer's intentions from the drawing and, based on this inference, suggest appropriate computational tools for the task at hand. For example, a layout bubble diagram might activate design cases with similar configurations. Scribbles of view lines on a floor plan might bring up a spatial analysis tool. This research aims to develop an integrated digital sketching environment to support early design activities. The paper proposes RT, an intelligent sketch environment that provides the designers with the right tools at the right time.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	64ff
authors	Fengb, C.-X., Kusiaka, A. and Huanga, C.-C.
year	1996
title	Cost evaluation in design with form features
source	Computer-Aided Design, Vol. 28 (12) (1996) pp. 879-885
summary	Reducing the cost of a product at the design stage is more effective than at the manufacturing stage. In this paper, an attempt is presented to quantify the manufacturing cost in feature-based design. Machining form features are classified as simple and complex. The machining cost of a part depends not only on the type of form features, but also on the relationship among the features. This cost is calculated for four different cases: traditional machining, simultaneous machining, simultaneous set-up and changeover, and multiple machine tools. A manufacturing process is represented with a digraph. The feature-based evaluation of manufacturing cost is formulated as the shortest path problem, and a mathematical model as well as an algorithm are presented to determine the minimum cost design alternative.
keywords	Feature-Based Design, Design for Machining, Manufacturing Cost Evaluation
series	journal paper
last changed	2003/05/15 21:33

_id	5fc4
authors	Fruchter, R.
year	1996
title	Conceptual Collaborative Building Design Through Shared Graphics
source	IEEE Expert special issue on Al in Civil Engineering, June vol. 33-41
summary	The Interdisciplinary Communication Medium computer environment integrates a shared graphic modeling environment with network-based services to accommodate many perspectives in an architecture/engineering/construction team. Communication is critical for achieving better cooperation and coordination among professionals in a multidisciplinary building team. The complexity of large construction projects, the specialization of the project participants, and the different forms of synchronous and asynchronous collaborative work increase the need for intensive information sharing and exchange. Architecture/engineering/construction (A/E/C) professionals use computers to perform a specific discipline's tasks, but they still exchange design decisions and data using paper drawings and documents. Each project participant investigates and communicates alternative solutions through representational idioms that are private to that member's profession. Other project participants must then interpret, extract, and reenter the relevant information using the conventional idioms of their disciplines and in the format required by their tools. The resulting communication difficulties often affect the quality of the final building and the time required to achieve design consensus. This article describes a computer environment, the Interdisciplinary Communication Medium (ICM), that supports conceptual, collaborative building design. The objective is to help improve communication among professionals in a multidisciplinary team. Collaborative teamwork is an iterative process of reaching a shared understanding of the design and construction domains, the requirements, the building to be built, and the necessary commitments. The understanding emerges over time, as team members begin to grasp their own part of the project, and as they provide information that lets others progress. The fundamental concepts incorporated in ICM include A communication cycle for collaborative teamwork that comprises propose-interpret-critique-explain-change notifications. An open system-integration architecture. A shared graphic modeling environment for design exploration and communication. A Semantic Modeling Extension (SME), which introduces a structured way to capture design intent. A change-notification mechanism that documents notes on design changes linked to the graphic models, and routes change notifications. Thus, the process involves communication, negotiation, and team learning.
series	journal paper
last changed	2003/04/23 15:14

_id	fb63
id	fb63
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol 21, no 1, March 1996
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
series	journal paper
type	normal paper
email
last changed	2008/06/12 16:34

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	ddssup9612
id	ddssup9612
authors	Kribbe, Willeke and Sanders, Frank
year	1996
title	Growth of spatial network constructions: a decision support systems oriented approach
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The paper describes a method that has been developed to be used in a process for a systematic search of alternative designs for a network configuration. In the design process we will take into account that we may not be able to implement the full configuration all at once. Logical partial configurations must be derived. The process can than also be used to investigate the expansion of (railroad) networks. The basic idea is that either the most profitable trajectories or the trajectories that contribute most to the improved quality of the configuration will be developed first. A method cannot incorporate all criteria that are relevant for the final decision simultaneously, one of the reasons being that not all criteria are suitable for a mathematical formulation. Therefore a method cannot be used to replace current legal and political procedures. However it can be considered to be part of a decision support system that could be used in a preliminary investigation preceeding such procedures. In the example presented in this paper the criteria and calculations are kept simple for illustrative purposes. However they can easily be made more complex and realistic without damaging the fundamental concepts of the search algorithm. If the system is implemented in a way that the criteria to be used in the selection process can be chosen in interaction with the decision maker (or moderator) one can truly speak of a decision support system for the project formulation phase for the construction of the physical network. In the algorithm the network is represented as a graph and the nodes connected by the network are termed centers of attraction, supply and demand.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: