Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 184

Reformat results as: short short into frame detailed detailed into frame

_id	02ac
authors	Wang, Donggen
year	1998
title	Conjoint Approaches to Developing Activity-Based Models
source	Eindhoven University of Technology, Faculty of Architecture and Urban Planning, The Netherlands
summary	Since the late 1950s, transportation models have played an important role in forecasting travel demand and evaluating the impacts of plans and policies. Planners use transportation models to learn about the behavior of transport systems. Over the past decades, the development of particular modeling approaches has closely followed planning needs, which in turn are closely related to dominant policy issues. The first generation of transportation models was developed during the late 1950s and early 1960s. Their purpose was to facilitate the prediction of future travel demand, such that road capacity programs could be based on predicted demand. The first generation models are commonly referred to as four-step models. These models are typically formulated and calibrated at the level of the traffic zones. Individuals are aggregated by traffic zone. Traffic is considered to be the result of four sequential decisions: trip generation, trip distribution, modal split and traffic assignment. These decisions are modeled separately at successive stages. Although the four-step models have been widely used, even institutionalized in literally thousands of applications (Stopher, et al., 1996), the major shortcoming of these large-scale, aggregate and supply-oriented models is their lack of behavioral content.
keywords	Traffic Behaviour; Traffic and Transportation Research
series	thesis:PhD
last changed	2003/02/12 22:37

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6c97
authors	Asanowicz, Aleksander
year	1996
title	Using the Computer in Analysis of Architectural Form
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 25-34
summary	One of the most important aspects of the designing process is: the design activity is usually conducted with incomplete information. Another important aspect of designing activity is: designing activity is usually based on past experience. As a matter of fact looking at designers in the early conceptual phases, one thing that appears clear is, instead starting from scratch, they spend a part of their time thinking about existing designing experience, reviewing the literature, and so on. That is why explicit representation of designing knowledge is needed if computers are to be used as the aid of design education and practice. Composition knowledge data base will be helpful during an architectural form analysis process as well. It makes possible to provide answers and explanations as well as allowing to view tutorials illustrating the particular problem. On its basic level such a program will present analysis of architectural objects and abstract forms based on subjective criteria. On its upper level allowing further exploration of various architectural composition attributes, as well as their influence on emotional- aesthetic judgements being formed during the process of analysis the architectural form.
series	other
last changed	1999/04/08 17:16

_id	80f7
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2001
title	Knowledge-based System to Support Architectural Design - Intelligent objects, project net-constraints, collaborative work
doi	https://doi.org/10.52842/conf.ecaade.2001.080
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 80-85
summary	The architectural design business is marked by a progressive increase in operators all cooperating towards the realization of building structures and complex infrastructures (Jenckes, 1997). This type of design implies the simultaneous activity of specialists in different fields, often working a considerable distance apart, on increasingly distributed design studies. Collaborative Architectural Design comprises a vast field of studies that embraces also these sectors and problems. To mention but a few: communication among operators in the building and design sector; design process system logic architecture; conceptual structure of the building organism; building component representation; conflict identification and management; sharing of knowledge; and also, user interface; global evaluation of solutions adopted; IT definition of objects; inter-object communication (in the IT sense). The point of view of the research is that of the designers of the architectural artefact (Simon, 1996); its focus consists of the relations among the various design operators and among the latter and the information exchanged: the Building Objects. Its primary research goal is thus the conceptual structure of the building organism for the purpose of managing conflicts and developing possible methods of resolving them.
keywords	Keywords. Collaborative Design, Architectural And Building Knowledge, Distributed Knowledge Bases, Information Management, Multidisciplinarity
series	eCAADe
email
last changed	2022/06/07 07:55

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	fb63
id	fb63
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol 21, no 1, March 1996
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
series	journal paper
type	normal paper
email
last changed	2008/06/12 16:34

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	149d
authors	Rosenman, M.A.
year	1996
title	The generation of form using an evolutionary approach
source	J.S. Gero and F. Sudweeks (eds), Artificial Intelligence in Design Ì96, 643-662
summary	Design is a purposeful knowledge-based human activity whose aim is to create form which, when realized, satisfies the given intended purposes.1 Design may be categorized as routine or non-routine with the latter further categorized as innovative or creative. The lesser the knowledge about existing relationships between the requirements and the form to satisfy those requirements, the more a design problem tends towards creative design. Thus, for non-routine design, a knowledge-lean methodology is necessary. Natural evolution has produced a large variety of forms well-suited to their environment suggesting that the use of an evolutionary approach could provide meaningful design solutions in a non-routine design environment. This work investigates the possibilities of using an evolutionary approach based on a genotype which represents design grammar rules for instructions on locating appropriate building blocks. A decomposition/aggregation hierarchical organization of the design object is used to overcome combinatorial problems and to maximize parallelism in implementation.
series	other
last changed	2003/04/23 15:50

_id	ddssup9621
id	ddssup9621
authors	Wang, D.
year	1996
title	Towards An Informatics Framework for Sustainability Analysis in Urban Transportation Planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	An informatics framework for sustainability analysis in urban transportation planning is developed in this paper. The framework consists of sustainability indicators, structured impact analysis, a general procedure, and a conceptual informatics framework which organises all these elements in a decision support system. In deriving sustainability indicators and structuring impact analysis, specific attention is given to comparisons between a trip-based approach and an activity-based approach, so that drawbacks of the conventional trip-based approach and potential of the activity-based approach are manifested in the context of sustainability analysis. Implications to the design of a decision support system for sustainability analysis are also discussed in terms of database and model base designs.
series	DDSS
email
last changed	2003/08/07 16:36

_id	8a25
authors	Alshawi, M. and Underwood, J.
year	1996
title	Applying object-oriented analysis to the integration of design and construction
source	Automation in Construction 5 (2) (1996) pp. 105-121
summary	This paper implements an Object Oriented Analysis technique to model information related to design and construction. In a previous study, an approach to integrate design and construction processes based upon information analysis and modelling has been proposed. By breaking down the project's vast information into groups of related information, construction related problems have been identified and then traced back too their relevant design processes. This paper models this process using a relatively young and new method of analysis rather than a traditional structured approach. An Object-Oriented Analysis (OOA) method has been applied to model the information in terms of the fundamental ideas that underlie object-oriented technology i.e. object types and classes, methods, requests, encapsulation and inheritance. Proceeding through the five major activities of Coad and Yourdon's OOA method, a complete OOA model has been developed with potential to improve the construction related problems.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	af94
authors	Anumba, C.J.
year	1996
title	Data structures and DBMS for computer-aided design systems
source	Advances in Engineering Software, 25(2/3), 123-129
summary	The structures for the storage of data in CAD systems influence to a large extent the effectiveness of the system. This paper reviews the wide range of data structures and database management systems (DBMS) available for structuring CAD data. Examples of basic data types are drawn from the MODULA-2 language. The relationship between these basic data types, their composite structures and the classical data models (on which many DBMS are based) is discussed, and the limitations of existing DBMS in modelling CAD data highlighted. A set of requirements for CAD database management systems is drawn up and the emerging role of product models (which seek to encapsulate the totality of data elements required to define fully an engineering artefact) is explored.
series	journal paper
last changed	2003/04/23 15:14

_id	b0d8
authors	Bourdakis, V.
year	1996
title	From CAAD to VRML: London Case Study
source	The 3rd UK VRSIG Conference Full Paper Proceedings, De Montfort University
summary	In this paper, the suitability and usability of VRML for urban modelling is discussed based on the experience gained by the creation of urban models of varying sizes, level of detail and use. Areas where the current VRML specification is failing to satisfy the needs of large-scale urban modelling are highlighted. Properties of a successful alternative or VRML3.0 specification are suggested and briefly discussed.
series	other
email
last changed	2003/11/21 15:16

_id	2a01
authors	Chernyshova, Nataly A.
year	1996
title	Methods of Modelling and Forming Criteria of Quality Assessment for Three-Dimensional and Spatial of Industrial Buildings
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 37-39
summary	One of the ways to improve design solutions is to make some variants of the design at the early stage of working on it. Such a process can be even more successful when it is based on computer techniques followed by comprehensive assessments of variants. The assessment of 3-dimensional and spatial solutions of industrial buildings is based on two groups of indices- technical and economical indices and the quality ones (criteria). Most of the indices belong to the first group while the second one is rather small. The list of the indices used in the procedure was worked out mainly for the assessment of finished projects and only a small part was worked out for the assessment of draft solutions.
series	plCAD
last changed	1999/04/09 15:30

_id	ddssar9611
id	ddssar9611
authors	de Gelder, Johan and Lucardie, Larry
year	1996
title	Criteria for the Selection of Conceptual Modelling Languages for Knowledge Based Systems
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In recent years knowledge is increasingly recognised as a critical production factor for organisations. Performance of activities such as designing, diagnosing, advising and decision making, depend on the availability and accessibility of knowledge. However, the increasing volume and complexity of knowledge endangers its availability and accessibility. By their knowledge processing competence, knowledge based systems containing a structured and explicit representation of knowledge, are expected to solve this problem. In the realisation of a knowledge based system, the phase in which a knowledge model is reconstructed through a conceptual language, is essential. Because the knowledge model has to be an adequate reflection of real-world knowledge, the conceptual language should not only offer sufficient expressiveness for unambiguous knowledge representation, but also provide facilities to validate knowledge on correctness, completeness and consistency. Furthermore, the language should supply facilities to be processed by a computer. This paper discusses fundamental criteria to select a conceptual language for modelling the knowledge of a knowledge based system. It substantiates the claim that the selection depends on the nature of the knowledge in the application domain. By analysing the nature of knowledge using the theory of functional object-types, a framework to compare, evaluate and select a conceptual language is presented. To illustrate the selection process, the paper describes the choice of a conceptual language of a knowledge based system for checking office buildings on fire-safety demands. In this application domain, the language formed by decision tables has been selected to develop the conceptual model. The paper provides an in-depth motivation why decision tables form the best language to model the knowledge in this case.
series	DDSS
last changed	2003/08/07 16:36

_id	ebd6
authors	Dobson, Adrian
year	1996
title	Teaching Architectural Composition Through the Medium of Virtual Reality Modelling
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 91-102
summary	This paper describes an experimental teaching programme to enable architectural students in the early years of their undergraduate study to explore their understanding of the principles of architectural composition, by the creation and experience of architectural form and space in simple virtual reality environments. Principles of architectural composition, based upon the ordering and organisation of typological architectural elements according to established rules of composition, are introduced to the students, through the study of recognised works of architectural design theory. Virtual reality modelling is then used as a tool by the students for the testing and exploration of these theoretical concepts. Compositional exercises involving the creation and manipulation of a family of architectural elements to create form and space within a three dimensional virtual reality environment are carried out using Superscape VRT, a PC based virtual reality modelling system. The project seeks to bring intuitive and immersive computer based design techniques directly into the context of design theory teaching and studio practice, at an early stage in the architectural education process.
series	other
last changed	1999/04/08 17:16

_id	4dcb
authors	Dourish, P., Holmes, J., MacLean, A., Marqvardsen, P. and Zbyslaw, A.
year	1996
title	Freeflow: Mediating Between Representation and Action in Workflow Systems
source	Proceedings of the ACM Conference on Computer Supported Cooperative Work CSCW’96, Boston, USA
summary	In order to understand some problems associated with workflow, we set out an analysis of workflow systems, identifying a number of basic issues in the underlying technology. This points to the conflation of temporal and dependency information as the source of a number of these problems. We describe Freeflow, a prototype which addresses these problems using a variety of technical innovations, including a rich constraint-based process modelling formalism, and the use of declarative dependency relationships. Its focus is on mediation between process "and action, rather than the enactment of a process. We outline the system and its design principles, and illustrate the features of our approach with examples from ongoing work.
series	other
last changed	2003/04/23 15:50

_id	ec0e
authors	Engeli, M. and Kurmann, D.
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	H.J.P. Timmermans (ed.), Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol. 1: Architecture Proceedings, pp. 132-142
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to experience rooms and 3D input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 3D model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	other
last changed	2003/04/23 15:50

_id	ddssar9609
id	ddssar9609
authors	Engeli, Maia and Kurmann, David
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to expe-rience rooms and 31) input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 31) model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9619
id	ddssar9619
authors	Kanoglu, Aiaattin
year	1996
title	A Site-Based Computerized Production Planning & Control Model for The Plants which Produce Prefabricated Building Components
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "open systems" in building prefabrication may be qualified more flexible to some extent compared to the closed ones and may use the tools and approaches used in industrial production areas for the estimation of demand and production. As for the closed systems in particular, it is not possible for these systems to apply this kind of approach. Their production must be based on absolutely assured demands and projects. Because of this, they need detailed projects and assembly schedules for produc-tion. As a result of this, their production modes can be qualified "custom-made" type and production planning functions must provide the demand values from the assembly schedules of contracted proj-ects. The problem can be solved by integrating the work schedules of the sites that are served by fac-tory. Integration of data on a computerized system will be preferable and it is possible to realize the model in two alternative ways. The first is developing a new conceptual model and convert it into a software and the second is developing an approach for customizing general purpose project planning and programming software for using them in production planning. The second solution is studied in the paper following this. The aim of this study is to develop the principals of a conceptual model for an Integrated Data Flow and Evaluation System for production planning in prefabrication and to con-vert this model into an applicable and objective computer-aided model.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9618
id	ddssar9618
authors	Kanoglu, Alaattin
year	1996
title	Application of General Purpose Project Planning & Programming Software for Production Planning & Control in Plants which Produce Prefabricated Building Components
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "open systems" in building prefabrication may be qualified more flexible to some extent compared to the closed ones and may use the tools and approaches used in industrial production areas for the es-timation of demand and production. As for the closed systems in particular, it is not possible for these systems to apply this kind of an approach. Their production must be based on absolutely assured de-mands and projects. Because of this, they need detailed projects and assembly schedules for produc-tion. As a result of this, their production modes can be qualified "custom-made" type and production planning functions must provide the demand values from the assembly schedules of contracted pro-jects. The problem can be solved by integrating the work schedules of the sites that are served by fac-tory. Integration of data on a computerized system will be preferable and it is possible to realize the model in two alternative ways. The first is developing a new conceptual model and convert it into a software and the second is developing an approach for customizing general purpose project planning and programming software for using them in production planning. The second solution is studied in the paper following this. The aims of this study are analyzing outstanding general purpose project planning & programming software from the point of view of requirements of production planning function and their customizability; comparing the requirements of the model designed for production planning and capabilities of general purpose planning software and developing the conceptual and practical dimensions and basic principals of the model for using the general purpose planning and programming software for production planning.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: