Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 406

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar9606
id	ddssar9606
authors	Doughty, D.C. and Zwirner, W.G.
year	1996
title	Spa Hotels and Facilities - a Comparison of Hotels in Budapest, Buxton and Piestany
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In Britain, health and leisure tourism seems primarily to mean leisure with health being normally merely a secondary consideration ranging from fresh air to diet. In central Europe Spas still draw tourists and patients for leisure and for treatments from their own as well as neighbouring countries. Indeed, whilst Buxton, Bath, Harrogate and Leamington draw day trippers to see their historic buildings, Carlsbad, Budapest, Piestany and many of the other grand old Spas of central Europe are filled with longer-term guests seeking an improvement to their own chronic ailments. The reasons for this decline in British Spas and the continuing relative good health of Spas in central Europe are a complex mix that includes national characteristic, financial constraints and a disbelief by the British medical establishment in the efficacy of the water cure and related Spa treatments. This reluctance to acknowledge complementary health care is certainly not the case in Germany and the old Austro-Hungarian lands and Spa tourism presents a challenge as well as a promise of lucrative international tourism to the emerging "new" states of pre-communist Europe.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9613
id	ddssar9613
authors	de Groot, E.H. and Louwers, F.H.
year	1996
title	The TIE-system, a KBS for the Evaluation of Thermal Indoor office Environments
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	A Knowledge-Based System [KBS] for the evaluation of Thermal Indoor office Environments [TIE] (in the Netherlands) was the product of a one-year project, undertaken by researchers of the Physical Aspects of the Built Environment group [FAGO] in cooperation with the Knowledge-Based System Section of the TNO-Building & Construction research Institute in Delft. The objective of the project was to develop a KBS capable of evaluating thermal indoor environments of existing or proposed office buildings designs. The approach used in this study was based on a traditional method of predicting thermal sensation by calculating Fanger's 'Predicted Mean Vote' [PMV]. PMV is influenced by four environmental parameters of a room: air temperature, radiant temperature, air velocity and relative humidity, and by two personal parameters of the employees: metabolic rate and clothing insulation. The knowledge required to determine these six parameters was placed in KBS-databases and tables using a KBS-building tool called Advanced Knowledge Transfer System [AKTS]. By questioning the user, the TIE-system is capable of determining the PMV for a particular office room. The system also provides conclusions and advice on improving the thermal comfort. The TIE-system was a pilot-study for the long-term Building Evaluation research project, being undertaken at FAGO, that examines in all aspects of office building performance, and in which KBS may play a major pole.
series	DDSS
last changed	2003/08/07 16:36

_id	e02e
authors	Mahdavi, A., Mathew, P., Lee, S., Brahme, R., Kumar, S., Liu, G., Ries, R. and Wong, N.H.
year	1996
title	On the Structure and Elements of SEMPER
doi	https://doi.org/10.52842/conf.acadia.1996.071
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 71-84
summary	This paper introduces the concept, structure, components, and application results of "SEMPER", an active, multi-aspect computational tool for comprehensive simulation-based design assistance. Specifically, SEMPER seeks to meet the following requirements: a) a methodologically consistent (first- principles-based) performance modeling approach through the entire building design and engineering process; b) seamless and dynamic communication between the simulation models and an object- oriented space-based design environment using the structural homology of various domain representations; and c) "preference-based" performance-to-design mapping technology (bidirectional inference). SEMPER involves the integrated computational modeling of heat transfer, air flow, HVAC system performance, thermal comfort, daylighting and electrical lighting, acoustics, and life-cycle assessment.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
doi	https://doi.org/10.52842/conf.acadia.2007.284
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	aa7c
authors	Amirante, M. Isabella and Burattini, Ernesto
year	1996
title	Automatic Procedures for Bio-Climatic Control
doi	https://doi.org/10.52842/conf.ecaade.1996.029
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 29-40
summary	The experiences illustrated here are related to the new regulation of teaching architecture in Italy and these ones in particular have been concentrated on the technological aspects of teaching architecture. We can consider the evolution of the architect from the individual operator to the manager multi- disciplinary aspects of the building process ( building process manager) as a reality today. Information technology, specifically applied to bio-climatic architecture and environmental control, can be of great importance for this professional role, and for this reason it is very useful to include these topics at the beginning the teaching design process. This paper describes a particular approach to bio-climatic problems of the architectural project. An experimental course has been performed by the second year students of the "Laboratorio di Construzione dell' Architettura", at the School of Architecture of the Second University of Naples, in Aversa. Analysing old and new buildings, they used some flow charts for the evaluation and representation of energetic behaviour of buildings regarding their climatic and geographical environment. In the flow charts the decisions are represented by boxes that allow to determine "rightness index" related to: morphological characters of the site and environment, typology and particular organisation of the inside spaces, shape of building, technological solution of the building "skin". The navigation through the decision boxes is made with simple options like; "winds: protected or exposed site", "shape of building; free, close or cross plane", "presence of trees on the south,; yes or not",; it shows the students the bio-climatic quality of the building and, through numeric value assigned to each option, determines the "weight" of its climatic comfort.
series	eCAADe
last changed	2022/06/07 07:54

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	acfa
authors	Brown, A., Knight, M. and Nahab, May
year	1996
title	Computer Generated Architectural Images in Practice: what kind and when?
doi	https://doi.org/10.52842/conf.ecaade.1996.079
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 79-86
summary	The production of near-photorealistic images of buildings is becoming increasingly common. The software to produce reasonably sophisticated images being available at affordable prices and the increasing power of generally affordable computers have contributed to this trend. It is also probably the case that the run-of-the-mill architectural practice sees the competition producing this kind of image with a superficially beguiling quality and follow suit. What we ask in this paper is whether we should be more thoughtful about the kind of image used? Should the kind of image chosen to suit the stage of the design that it applies to and the nature of the human agents viewing the image? Of course, in posing the question we imply our answer, that it should. What we do in this paper is to illustrate why we feel it should and what the consequences are for the education of architects who are about to join the world of practice.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ffe2
authors	Carrar, G., Luna, F. and Rajchman, A.
year	1999
title	Cúpulas Telefónicas - Mobiliario Urbano, Diseño Industrial aplicado a una empresa de servicios (Telephone Cupolas - Urban Furniture, Industrial Design Applied to a Company of Services)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 426-409
summary	By november 1996, the state telecomunication company called for a national booth design contest. The idea was to use the awarded design shortly as part of the renovation of the public phone service. Gruppo MDM won the design contest and was contracted to do the manufacture technical drawings and a prototype which was tested during 1997. By 1997, an international bid was held, including the awarded project. Gruppo MDM was contracted for the follow up of the manufacture process, including research of suppliers worldwide, materials arriving on time with the quality required, verifying local suppliers with deadlines and quality controlls according to the specifications.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	4aaa
authors	Cheng-Che, L., Oloufa, A.A. and Thomas, H.R.
year	1996
title	A GIS-based system for tracking pavement compaction
source	Automation in Construction 5 (1) (1996) pp. 51-59
summary	Compaction is an important operation for improving construction material stability in construction operations such as soils and asphalt pavement. Through the process of compaction, soil strength and stability can be increased to the magnitude required by the design. Quality control is an extremely important concern of State Highway Agencies and contractors. For asphalt pavements, performance and quality are affected by three primary factors: a properly designed mix, drainage, and adequate compaction. These three factors must be performed together to assure quality. For this reason, compaction is considered to be very important in the performance of asphalt pavements. This paper reports on research to develop a system to map the moving compaction equipment, transform this result into a geometrical representation, and to investigate the use of Geographic Information System (GIS) technology to develop a graphical representation depicting the number of coverages. Results are stored in a permanent record that can serve as a historical document.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2a01
authors	Chernyshova, Nataly A.
year	1996
title	Methods of Modelling and Forming Criteria of Quality Assessment for Three-Dimensional and Spatial of Industrial Buildings
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 37-39
summary	One of the ways to improve design solutions is to make some variants of the design at the early stage of working on it. Such a process can be even more successful when it is based on computer techniques followed by comprehensive assessments of variants. The assessment of 3-dimensional and spatial solutions of industrial buildings is based on two groups of indices- technical and economical indices and the quality ones (criteria). Most of the indices belong to the first group while the second one is rather small. The list of the indices used in the procedure was worked out mainly for the assessment of finished projects and only a small part was worked out for the assessment of draft solutions.
series	plCAD
last changed	1999/04/09 15:30

_id	7e3d
authors	Davidson, R. and Harel, D.
year	1996
title	Drawing Graphs nicely Using Simulated Annealing
source	ACM Transactions on Graphics, 15(4), pp. 301-331
summary	This article we address the general problem of drawing nice-looking undirected straight-line graphs. Any proposed solution to this problem requires setting general criteria for the "quality" of the picture. Defining such criteria so that they apply to different types of graphs, but at the same time are combined into a meaningful cost function that can then be subjected to general optimization methods, was one of the main objectives of our work. Another was to introduce flexibility, so that the user may change the relative weights of the criteria to obtain varying solutions that reflect his or her preferences
series	journal paper
last changed	2003/04/23 15:14

_id	6941
authors	Dawidowski, Robert
year	1996
title	CAD - The Step Towards the Aim as a Lot of Others or Something Else
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 53-58
summary	Right and left for years we have been swamped by information on equipment and software which is supposed change the quality and a designers' work style completely. In this computer and commercial deluge of words it is more and more difficult to get an understanding and clear attitude towards the dynamicly changing reality. Apart from the details of the CAD software and its influence on the effects of the architectural creative process, I would like to consider some problems connected with the influence of the CAD system on the architect's creative capabilities. Does it develope or limit these capabilities? Is a computer equipped with a CAD system a special tool (meaning the new values which it might give) or is it not?
series	plCAD
last changed	1999/04/09 15:30

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	819d
authors	Eiteljorg, H.
year	1988
title	Computing Assisted Drafting and Design: new technologies for old problems
source	Center for the study of architecture, Bryn Mawr, Pennsylvania
summary	In past issues of the Newsletter, George Tressel and I have written about virtual reality and renderings. We have each discussed particular problems with the technology, and both of us mentioned how compelling computer visualizations can be. In my article ("Virtual Reality and Rendering," February, 1995, Vol. 7, no. 4), I indicated my concerns about the quality of the scholarship and the level of detail used in making renderings or virtual worlds. Mr. Tressel (in "Visualizing the Ancient World," November, 1996, Vol. IX, no. 3) wrote about the need to distinguish between real and hypothetical parts of a visualization, the need to differentiate materials, and the difficulties involved in creating the visualizations (some of which were included in the Newsletter in black-and-white and on the Web in color). I am returning to this topic now, in part because the quality of the images available to us is improving so fast and in part because it seems now that neither Mr. Tressel nor I treated all the issues raised by the use of high-quality visualizations. The quality may be illustrated by new images of the older propylon that were created by Mr. Tressel (Figs. 1 - 3); these images are significantly more realistic than the earlier ones, but they do not represent the ultimate in quality, since they were created on a personal computer.
series	other
last changed	2003/04/23 15:50

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	5fc4
authors	Fruchter, R.
year	1996
title	Conceptual Collaborative Building Design Through Shared Graphics
source	IEEE Expert special issue on Al in Civil Engineering, June vol. 33-41
summary	The Interdisciplinary Communication Medium computer environment integrates a shared graphic modeling environment with network-based services to accommodate many perspectives in an architecture/engineering/construction team. Communication is critical for achieving better cooperation and coordination among professionals in a multidisciplinary building team. The complexity of large construction projects, the specialization of the project participants, and the different forms of synchronous and asynchronous collaborative work increase the need for intensive information sharing and exchange. Architecture/engineering/construction (A/E/C) professionals use computers to perform a specific discipline's tasks, but they still exchange design decisions and data using paper drawings and documents. Each project participant investigates and communicates alternative solutions through representational idioms that are private to that member's profession. Other project participants must then interpret, extract, and reenter the relevant information using the conventional idioms of their disciplines and in the format required by their tools. The resulting communication difficulties often affect the quality of the final building and the time required to achieve design consensus. This article describes a computer environment, the Interdisciplinary Communication Medium (ICM), that supports conceptual, collaborative building design. The objective is to help improve communication among professionals in a multidisciplinary team. Collaborative teamwork is an iterative process of reaching a shared understanding of the design and construction domains, the requirements, the building to be built, and the necessary commitments. The understanding emerges over time, as team members begin to grasp their own part of the project, and as they provide information that lets others progress. The fundamental concepts incorporated in ICM include A communication cycle for collaborative teamwork that comprises propose-interpret-critique-explain-change notifications. An open system-integration architecture. A shared graphic modeling environment for design exploration and communication. A Semantic Modeling Extension (SME), which introduces a structured way to capture design intent. A change-notification mechanism that documents notes on design changes linked to the graphic models, and routes change notifications. Thus, the process involves communication, negotiation, and team learning.
series	journal paper
last changed	2003/04/23 15:14

_id	c6dd
authors	Fruchter, Renate
year	1996
title	COMPUTER INTEGRATED ARCHITECTURE/ENGINEERING/CONSTRUCTION PROJECT-CENTERED LEARNING ENVIRONMENT
doi	https://doi.org/10.52842/conf.acadia.1996.227
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 227-234
summary	This paper describes an on-going effort, initiated at Stanford's Civil Engineering Department, to develop, implement, and test a new and innovative "Computer Integrated Architecture./Engineering/Construction" (A/E/C) course. The course takes a multi-site, cross- disciplinary, project-centered, team-oriented approach to teaching. The paper presents the motivation, methodology, computational infrastructure, and initial observations in the experimental A/E/C course. The course is sponsored by NSF Synthesis Coalition and is the result of the collaborative effort of faculty and researchers from Civil Engineering Department at Stanford University, and Architecture Department and Civil Engineering Department, at UC Berkeley. In this computer integrated A/EIC environment a new generation of architecture, engineering, construction students learns how to team up with other disciplines and the advantage of the emerging information technologies for collaborative work in order to design and build higher quality buildings faster.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	f748
authors	Hitchcock, Robert John
year	1996
title	Improving life-cycle information management through documentation of project objectives and design rationale
source	University of California, Berkeley, Department of Civil Engineering
summary	Fragmentation is a defining characteristic of the US building industry that has evolved with increased specialization in building disciplines, and is exacerbated by the present industry business model. While the industry has agreed that productivity and product quality can be dramatically improved by information integration and communication, it has not agreed what information is most important to share to achieve these improvements. Traditional documentation in drawings and specifications captures only the final product of building design decisions. Yet, reported building failures indicate that a lack of understanding between project participants regarding their diverse objectives may be a key factor in failure. This deficiency leads to an inadequate understanding of the rationale behind the myriad design decisions that must work in concert to achieve a global set of project objectives. This information is routinely lost under current information management practices as the building moves through its life cycle. The dissertation develops an innovative information framework intended to effectively structure and manage building life-cycle information. The framework contains a product model that represents the details of a building design that are traditionally documented for sharing between project phases. Two additional elements are integrated with this product model to document key information that is currently lost. Explicit Global Objectives define the overall purpose of a building project by explicitly identifying its intended performance and the criteria for evaluating their achievement. Design Rationale Records capture the associations between individual details of the product model and the objectives that these details are meant to achieve. This information is linked within the framework so that it can be archived, reviewed, and updated in an integrated fashion as a building project moves through time. Example applications of the framework are given. Documenting this key information has benefit across the building life cycle. Participants can more clearly specify project objectives. Multi-criteria evaluation of alternative design solutions and construction methods can be better supported, and the resulting decisions better documented for sharing amongst participants. Comprehensive commissioning can be more cost-effectively performed. During operations, evaluation of the actual performance of a building and detection of maintenance problems can be enhanced.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	6237
authors	Kiechle, Horst
year	1996
title	CONSTRUCTING THE AMORPHOUS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Constructing the Amorphous entails the ongoing research into a concept which aims to develop a new understanding for Art, Design and Architecture within society. Rigid, reductivist and confrontational methods based on static geometry, prejudice and competition are to be replaced by dynamic, interdisciplinary and integrative models. In his current art practice the author simulates existing architectural spaces whose interior are re-designed into sculpted environments, based on creative irregularity rather than idealised geometry. All the computer simulated “soft” environments can be realised on an architectural scale as temporary installations with the curved surfaces approximated through planar polygons cut from sheet materials. Within this framework the Darren Knight Gallery Project represents the most recently example. The paper discusses furthermore various 3D modeling options, such as standard CAD representations, high quality rendered video walk-throughs, VRML models and physically produced, full-scale models, made of corrugated cardboard. The cost and equipment requirements necessary for full-scale modeling in cardboard are outlined.
keywords	VRML, CAD, 3D Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:40

For more results click below: