Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	40ee
authors	Biagini, Carlo
year	1996
title	CAAD in the Transformability Evaluation of Historical Buildingsof Historical Buildings
doi	https://doi.org/10.52842/conf.ecaade.1996.055
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 55-58
summary	In the execution of a research, which was intended to identify methods and instruments for transformability evaluation of historical buildings, CAAD was usefully employed in the decision-making process at different levels. From an operative point of view, it was fundamental instruments for the acquisition of typomorphological data inherent to pre-existent buildings. It allowed us to create an archive of information which can be easily and flexibly up-dated. In fact the critical evaluation of these buildings is based on the identification of structural patterns which have characterized the typological evolution of the urban structure, and thus the different historical stratifications have to be carefully catalogued, profoundly analyzed and compared one with the other. CAAD was even more effective during the phase of meta-designing checking concerning the choices effected for conversion of old buildings, since it was possible to prefigure different scenarios according to formulated hypotheses and this gave us the opportunity to evaluate their effective practicability in relation to typo- morphological congruence and logical and formal connection between the old building and new design proposals.
series	eCAADe
last changed	2022/06/07 07:54

_id	4931
authors	Breen, Jack
year	1996
title	Learning from the (In)Visible City
doi	https://doi.org/10.52842/conf.ecaade.1996.065
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 65-78
summary	This paper focuses on results and findings of an educational project, in which the participating students had to develop a design strategy for an urban plan by using and combining endoscopic and computational design visualisation techniques. This educational experiment attempted to create a link between the Media research programme titled 'Dynamic Perspective' and an educational exercise in design composition. It was conceived as a pilot study, aimed at the investigation of emerging applications and possible combinations of different imaging techniques which might be of benefit in architectural and urban design education and potentially for the (future) design practice. The aim of this study was also to explore the relationship between spatial perception and design simulation. The point of departure for the student exercise was an urban masterplan which the Dynamic Perspective research team prepared for the workshop 'the (in)visible city' as part of the 1995 European Architectural Endoscopy Association Conference in Vienna, Austria. The students taking part in the exercise were asked to develop, discuss and evaluate proposals for a given part of this masterplan by creating images through different model configurations using optical and computer aided visualisation techniques besides more traditional design media.The results of this project indicate that an active and combined use of visualisation media at a design level, may facilitate communication and lead to a greater understanding of design choices, thus creating insights and contributing to design decision-making both for the designers and for the other participants in the design process.
series	eCAADe
email
more	http://www.bk.tudelft.nl/Media/
last changed	2022/06/07 07:54

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3451
authors	Harrison, Beverly L.
year	1996
title	The Design and Evaluation of Transparent User Interfaces. From Theory to Practice
source	University of Toronto, Toronto
summary	The central research issue addressed by this dissertation is how we can design systems where information on user interface tools is overlaid on the work product being developed with these tools. The interface tools typically appear in the display foreground while the data or work space being manipulated typically appear in the perceptual background. This represents a trade-off in focused foreground attention versus focused background attention. By better supporting human attention we hope to improve the fluency of work, where fluency is reflected in a more seamless integration between task goals, user interface tool manipulations to achieve these goals, and feedback from the data or work space being manipulated. This research specifically focuses on the design and evaluation of transparent user interface 'layers' applied to graphical user interfaces. By allowing users to see through windows, menus, and tool palettes appearing in the perceptual foreground, an improved awareness of the underlying workspace and preservation of context are possible. However, transparent overlapping objects introduce visual interference which may degrade task performance, through reduced legibility. This dissertation explores a new interface technique (i.e., transparent layering) and, more importantly, undertakes a deeper investigation into the underlying issues that have implications for the design and use of this new technique. We have conducted a series of experiments, progressively more representative of the complex stimuli from real task domains. This enables us to systematically evaluate a variety of transparent user interfaces, while remaining confident of the applicability of the results to actual task contexts. We also describe prototypes and a case study evaluation of a working system using transparency based on our design parameters and experimental findings. Our findings indicate that similarity in both image color and in image content affect the levels of visual interference. Solid imagery in either the user interface tools (e.g., icons) or in the work space content (e.g., video, rendered models) are highly interference resistant and work well up to 75% transparent (i.e., 25% of foreground image and 75% of background content). Text and wire frame images (or line drawings) perform equally poorly but are highly usable up to 50% transparent, with no apparent performance penalty. Introducing contrasting outlining techniques improves the usability of transparent text menu interfaces up to 90% transparency. These results suggest that transparency is a usable and promising interface alternative. We suggest several methods of overcoming today's technical challenges in order to integrate transparency into existing applications.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	010d
authors	Kokosalakis, Jen
year	1996
title	The Role and Status of Computing and Participation of Design Clients in the Curriculum
doi	https://doi.org/10.52842/conf.ecaade.1996.227
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 227-238
summary	This paper is not intended as a fully researched exploration into architecture course coverage, but an attempt to introduce debate regarding some concerns on the role and status of Computing and consumer participation in the hope that CAAD peers will discuss and reflect with other specialists. A number of commentaries on serious deficiencies in the education of architects point to poor take-up of computing into the curriculum and an almost disassociation of the eventual designed building user from decisions on the design. By comparison it seems easier to find architects today who involve clients almost throughout the design process and increasing competency and continuity of CAAD usage in practices. The few brief references to Schools’ curricula are not formalised random studies. Certainly many excellent features will have been omitted. The intention is to start the debate. Finally a few directions are noted and some conclusions proffered. An argument is made for 3D CAAD models as the backbone and direct negotiating focus for design arbitration between consumer, designer [or students] and other professional collaborators in tesigning buildings, particularly where complex forms and spatial relationships are involved.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ddssar9622
id	ddssar9622
authors	Macmillan, Andrew andMezughi, Mustafa M.
year	1996
title	The integral role of conventional sketching in conceptualisation
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Architectural Design Studies is an expanding research area, which recently has experienced dramatic shifts in approach. The successful application of computing to architectural practice has created pressure leading to a rediscovery of Architectural Drawing. The thrust of recent design studies is toward the early stages of the design process, where the modes of conception, human perceptual, and cognitive systems are the focus. In this paper we endeavour to examine the integral role of sketching in conceptualisation. A modelling technique relating to both the design and the graphic process 'sheds light' on the interaction between thought and drawing. Data from a protocol analysis is tested within the framework of the proposed model.
series	DDSS
last changed	2003/08/07 16:36

_id	e09a
authors	Rüdiger, Bjarne
year	1996
title	The Masonry House Raised as an Exhibition and Information Building
doi	https://doi.org/10.52842/conf.ecaade.1996.387
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 387-390
summary	At many schools of architecture the studies are directed to practical, professional use, and this fact results in different attitudes. But normally, it will be so that the longer the student goes in the study the more aspects from practice will be involved. Therefore, the studies passes from the work with the design itself and the more artistic sides to the work with planning and production. The basis of the educational progress and the professional level is research and development. Within CAD it is important that this research develops as well the theoretical foundation and includes experience in the practical use. An attitude which prioritizes the practical qualifications late in the studies has of course an effect in the CAD instruction. Tendencies to consider the computer to be a tool of drawing and visualization will dominate, and the work with structuralized information models for a general documentation has had minor interest until now, and this also includes the use of professional applications developed from different conventions in support of collaboration and quality control. The dialogue between the environment of education and research on one hand and the professional business in practice must be considered important for the developing process in the use of CAD and for the building of usable IT models. The work with "The Masonry House" and later "The Building Trade House" tries to expose how a deliberate structuralization of the CAD model early in the sketching- and planning process can support as well the more esthetic estimates as the building technology documentation. And also point out the professional qualifications bound up with 11 to be integrated in the study course.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddssar9603
id	ddssar9603
authors	Daru, R. and Snijder, H.P.S.
year	1996
title	Morphogenetic Designing in Architecture resolving controversies in and between design, research and development
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	There is a dearth of software able to support the working styles of all types of designers and design scholars, spanning the whole spectrum of hermeneutical and empirical traditions. The development of morphogenetic designing in architecture opens new possibilities to bridge the gap between the different traditions. It can support the birth of forms evolving one from the other with the help of local and global rules in genetic algorithms and neural networks which translate the wishes of the designer. It can also support the communication about these forms and the testing of their adequacy. On the other hand the design process which is reflected in the sequence of form generating acts can be studied by design researchers better than by protocols alone.
series	DDSS
last changed	2003/08/07 16:36

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
doi	https://doi.org/10.52842/conf.ecaade.1996.025
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	af53
authors	Boyer, E. and Mitgang, L.
year	1996
title	Building community: a new future for architecture education and practice
source	Carnegie Foundation for the Advancement of Teaching
summary	Internships, before and after graduation, are the most essential link connecting students to the world of practice. Yet, by all accounts, internship is perhaps the most troubled phase of the continuing education of architects. During this century, as architectural knowledge grew more complex, the apprenticeship system withered away and schools assumed much of the responsibility for preparing architects for practice. However, schools cannot do the whole job. It is widely acknowledged that certain kinds of technical and practical knowledge are best learned in the workplace itself, under the guidance of experienced professionals. All state accrediting boards require a minimum period of internship-usually about three years-before a person is eligible to take the licensing exam. The National Council of Architectural Registration Boards (NCARB) allows students to earn up to two years of work credit prior to acquisition of an accredited degree. The Intern Development Program (IDP), launched by NCARB and the American Institute of Architects in 1979, provides the framework for internship in some forty states. The program was designed to assure that interns receive adequate mentoring, that experiences are well-documented, and that employers and interns allocate enough time to a range of educational and vocational experiences to prepare students for eventual licensure. As the IDP Guidelines state, "The shift from school to office is not a transition from theory to pragmatism. It is a period when theory merges with pragmatism.... It's a time when you: apply your formal education to the daily realities of architectural practice; acquire comprehensive experience in basic practice areas; explore specialized areas of practice; develop professional judgment; continue your formal education in architecture; and refine your career goals." Whatever its accomplishments, however, we found broad consensus that the Intern Development Program has not, by itself, solved the problems of internship. Though we found mutually satisfying internship programs at several of the firms we visited or heard about around the country, at many others interns told us they were not receiving the continuing education and experience they needed. The truth is that architecture has serious, unsolved problems compared with other fields when it comes to supplying on-the-job learning experiences to induct students into the profession on a massive scale. Medicine has teaching hospitals. Beginning teachers work in actual classrooms, supported by school taxes. Law offices are, for the most part, in a better financial position to support young lawyers and pay them living wages. The architecture profession, by contrast, must support a required system of internship prior to licensure in an industry that has neither the financial resources of law or medicine, the stability and public support of teaching, nor a network of locations like hospitals or schools where education and practice can be seamlessly connected. And many employers acknowledged those problems. "The profession has all but undermined the traditional relationship between the profession and the academy," said Neil Frankel, FAIA, executive vice president of Perkins & Will, a multinational firm with offices in New York, Chicago, Washington, and London. "Historically, until the advent of the computer, the profession said, 'Okay, go to school, then we in the profession will teach you what the real world is like.' With the coming of the computer, the profession needed a skill that students had, and has left behind the other responsibilities." One intern told us she had been stuck for months doing relatively menial tasks such as toilet elevations. Another intern at a medium-sized firm told us he had been working sixty to seventy hours per week for a year and a half. "Then my wife had a baby and I 'slacked off' to fifty hours. The partner called me in and I got called on the carpet for not working hard enough." "The whole process of internship is being outmoded by economics," one frustrated intern told us. "There's not the time or the money. There's no conception of people being groomed for careers. The younger staff are chosen for their value as productive workers." "We just don't have the best structure here to use an intern's abilities to their best," said a Mississippi architect. "The people who come out of school are really problems. I lost patience with one intern who was demanding that I switch him to another section so that he could learn what he needed for his IDP. I told him, 'It's not my job to teach you. You are here to produce.'" What steps might help students gain more satisfying work opportunities, both during and after graduation?
series	other
last changed	2003/04/23 15:14

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	6c40
authors	Colajanni, B., Martelli, T. and Pellitteri, G.
year	1996
title	A Tool for the Analysis of the Behaviour of Building Components: The Cellular Automation
doi	https://doi.org/10.52842/conf.ecaade.1996.099
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 99-110
summary	An implementation of a cellular automation is presented that allows the simulation of the behaviour of building components under diverse environment conditions. The tool has a wide range of applications because of the generality of its structure. The object on which it operates is represented as a set of cells each of which is defined, besides its geometrical dimension and position, by a set of variables and parameters. The work it performs consists in computing transitions from a state to another, i.e. the values variables and parameters take in each cell under the action of external agents and of internal laws of interaction between self As an example of its use an application is shown analysing the thermal behaviour of the connection of a curtain wall to a concrete floor.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	e479
authors	Costanzo, Ezilda and De Vecchi, Antonio
year	1996
title	Computer-Aided Planning of Connections Among Building Components
doi	https://doi.org/10.52842/conf.ecaade.1996.111
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 111-120
summary	In these last years the use of advanced technological types of construction, prevalently consisting of mechanical assembly systems, is also spreading to create connections among building elements. The aim of the research we are carrying on is to develop an automated software tool aiding the planning of assembly systems adopted in building, which are often characterised by high complexity levels. At the present, such subject is being studying in the mechanical field; but the difference of components and of products, seldom mass-produced and industrialised in building, make only few factors be available to our field, where further and different investigations are required.
series	eCAADe
last changed	2022/06/07 07:56

_id	ab1e
authors	Coyne, R., McLaughlin, S., Newton, S., Sudweeks, F., Haynes, D. and Jumani, A.
year	1996
title	Report on Computers in Practice: A survey of computers in architectural practice
source	UK: University of Edinburgh
summary	This is a report on the dynamic relationship between information technology (IT) and architectural practice. The report summarises the attitudes and opinions of practitioners gathered through extensive recorded interviews, and compares these attitudes and opinions with the findings of other studies. The report is compiled from the point of view of an understanding of appropriating as preceding as the model for understanding. We thereby connect what is going on in IT with concepts currently under discussion in postmodern thought and in the tradition of philosophical pragmatism. We identify several of the major options identified by practitioners in their use of IT, including practicing without computers, substituting computers for traditional tasks, delivering traditional services in an innovative way through IT, and developing new services with IT. We also demonstrate how firms are changing and are being shaped by the market for architectural services. One of the major areas of change is in how IT and related resources are managed. We also consider how the role of the practitioner as an individual in a firm is changing along with changes in IT, and how different prognoses about the future of IT in practice are influenced by certain dominant metaphors. Our conclusion is that IT is best understood and appropriated when it is seen as fitting into a dynamic field or constellation of technologies and practices. Such an orientation enables the reflective practitioner to confront what is really going on as IT interacts with practice. praxis- practice theory
series	report
last changed	2003/04/23 15:50

_id	6abd
authors	Dawson, Anthony and Burry, Mark
year	1996
title	The Continuing Dichotomy: Practice vs. Education
doi	https://doi.org/10.52842/conf.ecaade.1996.131
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 131-142
summary	While it is apparent from the architectural literature that some practices are innovative in their use of computers for architectural design, clear evidence indicates that most architectural practices have applied computing to traditional practice paradigms. Information technology is therefore being applied to practice systems which were in place prior to computers being available. This has significant implications for architectural education in which there is tension developing between the requirements of the commercially oriented architectural practice and the innovation driven computer-aided architectural design educator. The first wishes to equip graduates for immediate and productive employment in computerised architectural practices and may be loosely interpreted as a graduate’s ability to work as a CAD operator within an architectural practice environment. The second has the desire for students to be innovative in their use of information technology as an aid in informing and evaluating parts of both the design process and its outcomes. However, it is only when both architects and educators identify the architectural process as an integrated information system that these tensions can be resolved. This requires reconsideration of the function and use of information technology in both educational institutions and in architectural practices. The paper discusses how fruitful this can be in the current environment and outlines current developments at Deakin University which aim at providing a middle ground
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddssup9605
id	ddssup9605
authors	Demir, Yuksel
year	1996
title	A Design & Decision Support System Proposal for Housing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The subject of this study is to develop an information management system integrating all the related specialists and sources of information virtually from all related fields in building sector (housing) of Turkey; including design, production, construction, marketing, research. The application field has been chosen as housing for having a contribution to the existing housing problem. Although the subject of architecture is one : "the building", the specialists taking place during the lifetime of a building (from design, to destruction) are numerous. Moreover the links between practitioners, academicians, industry are missing Conventional methods, technology are expensive, time consuming. and insufficient to establish and maintain a healthy coordination between these contributors (mainly the design team and all the other related persons, institutions etc.). This has a strong negative effect on the concepts of "wholeness " and "integrity". The result is a built environment which is lacking significant qualities, while the money has been spent is even much more than required for a proper result. This means the loss of a considerable amount of resources. Especially in a country, which has to build thousands of houses each year, for low income groups, the efficient use of the limited sources becomes more essential. Though the potential user range of the system may include constructors, contractors, building element / material producers and retailers, surveyors, institutions, universities, the main user is aimed to be the architect. The system is aimed to support designers to deal with "complexity" without neglecting the concept of "wholeness". Within the study, the problems which became a stimulus for the development of this system will be investigated. The philosophical base, structure and the possible advantages of the proposal will be discussed.
keywords	Design & Decision Support Systems, Information Technology, Information Management, Holistic View of Approach, Specialization
series	DDSS
last changed	2003/08/07 16:36

For more results click below: