Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 463

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup9601
id	ddssup9601
authors	Aoke, Yoshitsugu and Muraoka, Naoto
year	1996
title	An optimization method of the facility location by genetic algorithm
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In planning of community-facilities, it is important to decide the facility location to provide the effective service for residents. The behavior of residents using the facility and the evaluation methods of the location have been studied. But, finding the optimum location is very hard in actual planning because the volume of calculation depends on the number of feasible locating points of facilities. To conquer the difficulty of searching the optimum location, we propose an optimization method using Genetic Algorithm. An alternative of location is expressed by a chromosome. Each chromosome consists of genes, and each gene expresses a located zone of the facility. We gave definitions of genetic procedures; crossing-over, mutation and selection. Alternatives of the facility location are generated by these genetic procedures like as life evolution. For each alternative, the behaviors of users are estimated by a spatial-interaction model, and the facilities that residents in each place choose are determined. The effectiveness of the location is measured by a total sum of distances between the facility and the user. After the confirmation of the effectiveness of our method by applying on ideal example problems, we applied it on the actual problem in Japanese town. By this method we could find the optimum location in about one-third time and effort as compared with the ordinal method.
series	DDSS
last changed	2003/11/21 15:15

_id	62a1
authors	Maher, M.L. and Poon, J.
year	1996
title	Modelling design exploration as co-evolution
source	Microcomputers in Civil Engineering, 11:192-207
summary	Most computer-based design tools assume designers work with a well defined problem. However, this assumption has been challenged by current research. The explorative aspect of design, especially during conceptual design, is not fully addressed. This paper introduces a model for problem-design exploration, and how this model can be implemented using the genetic algorithm (GA) paradigm. The basic GA, which does not support our exploration model, evaluates individuals from a population of design solutions with an unchanged fitness function. This approach to evaluation implements search with a prefixed goal. Modifications to the basic GA are required to support exploration. Two approaches to implement a co-evolving GA are presented and discussed in this paper: one in which the fitness function is represented within the genotype, and a second in which the fitness function is modelled as a separately evolving population of genotypes.
series	journal paper
email
last changed	2003/04/23 15:50

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
doi	https://doi.org/10.52842/conf.acadia.2007.284
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
doi	https://doi.org/10.52842/conf.ecaade.1996.025
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	7135
authors	Arumi-Noe, F.
year	1996
title	Algorithm for the geometric construction of an optimum shading device
source	Automation in Construction 5 (3) (1996) pp. 211-217
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction, and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	63a7
id	63a7
authors	Ataman, Osman and Lonnman, Bruce
year	1996
title	Introduction to Concept and Form in Architecture: An Experimental Design Studio Using the Digital Media
doi	https://doi.org/10.52842/conf.acadia.1996.003
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 3-9
summary	This paper describes the use of digital media in a first year undergraduate architectural design studio. It attempts to address the importance of developing a design process that is redefined by the use of computing, integrating concept and perception. Furthermore, it describes the theoretical foundations and quasi-experiments of a series of exercises developed for beginning design students.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c4be
authors	Bock, T., Stricker, D., Fliedner, J. and Huynh, T.
year	1996
title	Automatic generation of the controlling-system for a wall construction robot
source	Automation in Construction 5 (1) (1996) pp. 15-21
summary	In this article we present several important aspects of a software system control. This is designed and developed for a wall assembly robot in an European Esprit III project called ROCCO, RObot assembly system for Computer integrated COnstruction. The system consists of an off-line program for planning of complex assembly tasks and for generating robot actions. The execution is controlled through an adaptive user interface and gives the user the possibilities to switch in an on-line mode command. All the software is designed with the object-oriented concept and implemented in C + +. The wall assembly system is organized on the base of the successive generation of different types of actions, called "Mission", "Task", and "Action". They represent different levels of assembly complexities. Those different actions are organized in a tree structure. Furthermore, the software system can be connected to a CAD-robot simulation software for checking the robot assembly motions. Added to the control system, a recovery module has been implemented for all possible errors during the construction. First the OO-model of the world and of robot activities will be presented. Secondly, several aspects of the algorithm will be explained and at the end we will show the strategy used for the robot motion.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	9530
authors	Broadhurst, S.J., Cockerham, G., Taylor, N. and Pridmore, T.
year	1996
title	Automatic task modelling for sewer studies
source	Automation in Construction 5 (1) (1996) pp. 61-71
summary	Research into the development of robotic modules is discussed in the context of cost-effective, small bore, non-man entry (NME) sewer renovation. Following an introduction to the engineering problem or task and the respective task-associated sensing system, interest is centred upon suitably robust task kinematics and control, where predictive modelling is implemented employing the GRASP robotic simulation software package. The physical prototype and its accompanying environment are discussed and general conclusions drawn.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	6dda
authors	Farin, Gerald E.
year	1996
title	Curves and Surfaces for Computer-aided Geometric Design
source	Morgan Kaufmann Publishers. San Francisco
summary	System requirements: IBM and compatibles with DOS 2.0 or higher or UNIX. This book offers an introduction to the field that emphasizes Bernstein-Bezier methods and presents subjects in an informal, readable style, making this an ideal text for an introductory course at the advanced undergraduate or graduate level. This 3rd edition includes several new section and numerical examples, a treatment of the new blossoming principle, and new C programs. All C programs are available on a disk included with the book. The Problems Sections at the end of each chapter have also been extended.
series	other
last changed	2003/04/23 15:14

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	64ff
authors	Fengb, C.-X., Kusiaka, A. and Huanga, C.-C.
year	1996
title	Cost evaluation in design with form features
source	Computer-Aided Design, Vol. 28 (12) (1996) pp. 879-885
summary	Reducing the cost of a product at the design stage is more effective than at the manufacturing stage. In this paper, an attempt is presented to quantify the manufacturing cost in feature-based design. Machining form features are classified as simple and complex. The machining cost of a part depends not only on the type of form features, but also on the relationship among the features. This cost is calculated for four different cases: traditional machining, simultaneous machining, simultaneous set-up and changeover, and multiple machine tools. A manufacturing process is represented with a digraph. The feature-based evaluation of manufacturing cost is formulated as the shortest path problem, and a mathematical model as well as an algorithm are presented to determine the minimum cost design alternative.
keywords	Feature-Based Design, Design for Machining, Manufacturing Cost Evaluation
series	journal paper
last changed	2003/05/15 21:33

_id	88f4
authors	Fu, S., Bao, H. and Peng, Q.
year	1996
title	An Accelerated Rendering Algorithm for Stereoscopic Display
doi	https://doi.org/10.52842/conf.caadria.1996.053
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 53-61
summary	With the development of the scientific visualization and the virtual environment techniques, stereo viewing systems have not been used extensively. In this paper, we present an accelerated rendering algorithm for stereoscopic display. As the difference between the left view and the right view is slight, we generate the right view by a transformation of the left view conforming to the stereo disparity. The problem of visibility change of a few polygons during the transformation is discussed and an efficient algorithm is developed for filling the holes that may arise in the right view after the transformation. This method makes fully use of the coherence between the left view and the right view. Experiments prove its efficiency.
series	CAADRIA
last changed	2022/06/07 07:50

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	c8c8
authors	Hendricx, A., Neuckermans, H., Vandevyvere, H. and Nuyts, K.
year	1996
title	CAAD in Pedagogical Practice
doi	https://doi.org/10.52842/conf.ecaade.1996.199
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 199-210
summary	The course on CAAD at the KU Leuven is part of the course on design methodology and theory from which it is the most recent and natural extension. Attached to this course a series of assignments has been developed which bring the students in 45 hours to a non-trivial level of acquaintance with CAAD. Our assignments are primarily directed towards practice. They are built on top of AutoCAD to which we have added in-house developments in order to focus on specific pedagogical goals within a very limited time. After a general introduction on Windows (file management) and AutoCAD (basics) students make the following assignments (main pedagogical goals in between brackets). colophon (working with blocks), detail (2D-drawing, hatching, editing), facade design using a built-in system of proportion (slides, scriptfile), extraction (linking alphanumerical and graphical entities), container (level of detail, icon menus, viewports), surface modelling (modelling 3D-objects with surfaces), fractal tree (recursion in Autolisp), solid modelling (Leicester engineering building), lighting (integration of drawing and computation of illumination levels), pressure lines in an arc (interactive design of an arc), demos. The paper presents and comments these assignments and shows results from the last 2 years.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	dba1
authors	Hirschberg, Urs and Wenz, Florian
year	2000
title	Phase(x) - memetic engineering for architecture
source	Automation in Construction 9 (4) (2000) pp. 387-392
summary	Phase(x) was a successful teaching experiment we made in our entry level CAAD course in the Wintersemester 1996/1997. The course was entirely organized by means of a central database that managed all the students' works through different learning phases. This set-up allowed that the results of one phase and one author be taken as the starting point for the work in the next phase by a different author. As students could choose which model they wanted to work with, the whole of Phase(x) could be viewed as an organism where, as in a genetic system, only the "fittest" works survived. While some discussion of the technical set-up is necessary as a background, the main topics addressed in this paper will be the structuring in phases of the course, the experiences we had with collective authorship, and the observations we made about the memes2 that developed and spread in the students' works. Finally we'll draw some conclusions in how far Phase(x) is relevant also in a larger context, which is not limited to teaching CAAD. Since this paper was first published in 1997, we have continued to explore the issues described here in various projects3 together with a growing number of other interested institutions worldwide. While leaving the paper essentially in its original form, we added a section at the end, in which we outline some of these recent developments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	3a63
authors	Kaynak, O.
year	1998
title	Computational intelligence: soft computing and fuzzy-neuro integration with applications
source	Springer, Berlin
summary	Soft computing is a consortium of computing methodologies that provide a foundation for the conception, design, and deployment of intelligent systems and aims to formalize the human ability to make rational decisions in an environment of uncertainty and imprecision. This book is based on a NATO Advanced Study Institute held in 1996 on soft computing and its applications. The distinguished contributors consider the principal constituents of soft computing, namely fuzzy logic, neurocomputing, genetic computing, and probabilistic reasoning, the relations between them, and their fusion in industrial applications. Two areas emphasized in the book are how to achieve a synergistic combination of the main constituents of soft computing and how the combination can be used to achieve a high Machine Intelligence Quotient.
series	other
last changed	2003/04/23 15:14

_id	4a62
authors	Leake, D.B. (ed.)
year	1996
title	Case-Based Reasoning: Experiences, Lessons, and Future Directions
source	The MIT Press
summary	Case-based reasoning (CBR) is now a mature subfield of artificial intelligence. The fundamental principles of case-based reasoning have been established, and numerous applications have demonstrated its role as a useful technology. Recent progress has also revealed new opportunities and challenges for the field. This book presents experiences in CBR that illustrate the state of the art, the lessons learned from those experiences, and directions for the future. True to the spirit of CBR, this book examines the field in a primarily case-based way. Its chapters provide concrete examples of how key issues---including indexing and retrieval, case adaptation, evaluation, and application of CBR methods---are being addressed in the context of a range of tasks and domains. These issue-oriented case studies of experiences with particular projects provide a view of the principles of CBR, what CBR can do, how to attack problems with case-based reasoning, and how new challenges are being addressed. The case studies are supplemented with commentaries from leaders in the field providing individual perspectives on the state of CBR and its future impact. This book provides experienced CBR practitioners with a reference to recent progress in case-based reasoning research and applications. It also provides an introduction to CBR methods and the state of the art for students, AI researchers in other areas, and developers starting to build case-based reasoning systems. It presents experts and non-experts alike with visions of the most promising directions for new progress and for the roles of the next generation of CBR systems.
series	other
last changed	2003/04/23 15:14

_id	8c8d
authors	Li, Andrew I Kang and Tsou, Jin Yeu
year	1996
title	Using Virtual Models to Teach Traditional Chinese Wood Construction
doi	https://doi.org/10.52842/conf.caadria.1996.119
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 119-130
summary	In this paper we discuss our experience in using virtual models to teach traditional Chinese wood construction. Although our approach is technically simple – we use a kit of model parts made with the Solid Modeler of AutoCAD, Release 12 (now Release 13), and customized commands in AutoLISP – we have had excellent results. This is because of the remarkable match between the modelling medium and the highly systematized nature of traditional Chinese wood construction. It is this crucial – and interesting – characteristic that we want students to understand and appreciate. In our first teaching experience, in the fall term, 1994-95, despite unexpected drawbacks, our approach succeeded. In fact, our students, all Hong Kong Chinese, were surprisingly enthusiastic and even took pride in the sophistication of this uniquely Chinese construction system. In 1995-96, we have used the same kit of parts in two courses: an introduction to Chinese architecture (spring term) and an advanced course in Song dynasty wood construction (fall term). We first discuss briefly the theoretical basis for our approach. We then describe the assignments, the kit of parts, and supporting materials used in our teaching experiences. Finally, we discuss our findings and consider directions for the future development and improvement of our approach.
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: