Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 493

Reformat results as: short short into frame detailed detailed into frame

_id	88a2
authors	Zhang, Lei
year	1996
title	The Design of a Test Program for Basic Design
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 253-267
doi	https://doi.org/10.52842/conf.caadria.1996.253
summary	Within the whole range of methods available in the teaching of design with computer the "Exercise" made, seems to be one of the most productive. Not only the student but also the teacher is involved in a step by step process of search, discovery and development. The continuous and controlled building of complexity in architecture design are the underlying issues. The student models in desecrate steps, exploring, testing, discovering and thus build a "repertoire" which combines knowledge skills, experience, attitudes as well as methodology. Symbiotically related the teacher prepares the exercise, one might call the process applied design research. Since based upon research, the teacher structures the learning process defining the what and why by indirect means. Leaving the how to the student's initiative and inventiveness. The design of the design or the design of the learning process poses one of the real challenges to the teacher. In the case of chains of exercise the interactiveness of the student and teacher are of specific interest, since feedback loops add to the process. The following test program is directly related to this line of thinking. In it a "teacher" is asked to develop a simple chain of exercises based on a given "theoretical model". Thus building his own experience in basic design. In this test run the student is introduced to the concept of continuous space as well as the notion of architecture form as the interaction between space, site and structure a course. It could be seen as a basic model since we could have much more complex resolutions if we change the given elements and limitations.
series	CAADRIA
last changed	2022/06/07 07:57

_id	af94
authors	Anumba, C.J.
year	1996
title	Data structures and DBMS for computer-aided design systems
source	Advances in Engineering Software, 25(2/3), 123-129
summary	The structures for the storage of data in CAD systems influence to a large extent the effectiveness of the system. This paper reviews the wide range of data structures and database management systems (DBMS) available for structuring CAD data. Examples of basic data types are drawn from the MODULA-2 language. The relationship between these basic data types, their composite structures and the classical data models (on which many DBMS are based) is discussed, and the limitations of existing DBMS in modelling CAD data highlighted. A set of requirements for CAD database management systems is drawn up and the emerging role of product models (which seek to encapsulate the totality of data elements required to define fully an engineering artefact) is explored.
series	journal paper
last changed	2003/04/23 15:14

_id	418a
authors	Kim, Inhan
year	1996
title	A Design System for Concurrent Reuse of Architectural Data
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 163-172
doi	https://doi.org/10.52842/conf.caadria.1996.163
summary	This paper describes a design system which supports the concurrent re-use of existing design information by means of an object-oriented database system. The system manages component versioning within a flexible design environment which is to be used by a design team working on an evolving, complex design. A database of prototype designs has been built with a database system that supports versioning. The basic database operations are then extended with the routines that support inter-designer communication. The database system with these extensions produces a design environment in which designers using partitioned design databases holding multiple design component versions, may concurrently develop new designs. In addition, an expert system shell has been incorporated to deal with design evaluation processes. In this paper, the authors investigate the mechanisms by which existing design versions may be represented, combined and edited to provide new designs.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	6f13
authors	Morozumi, M., Hamada, T., Shimokawa, Y. and Iki, K.
year	1996
title	On the Development of 3-D Schematic Design System Utilities for Planning Sketches and 3-D Modeling
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 63-73
doi	https://doi.org/10.52842/conf.caadria.1996.063
summary	Though it is the basic tasks of designers in a schematic design stage both to program design requirements and, then, to develop spatial images of a building following those programs, most CAD systems have lacked convenient utilities to interpret a program for some forms of spatial designs, or to assess developed designs referring to the prepared programs. This paper, in the first part, reviews design procedures of designers and the internal limits of the existing CAD system, and in the second part, discusses a schematic design system that the authors have developed. Presenting the case study with the system, the authors show that the system provides a convenient environment of schematic design.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	a32f
authors	Qamhiyah, A.Z., Venter, R.D. and Benhabib, B.
year	1996
title	Geometric reasoning for the extraction of form features
source	Computer-Aided Design, Vol. 28 (11) (1996) pp. 887-903
summary	The primary limitation of feature-recognition approaches, namely their lack of generalization, has been addressed by the development of feature-extraction techniques. This paper presents a boundary-based procedurefor the sequential extraction of form features from CAD models of objects with planar surfaces. An object is viewed as an initial basic shape that has been iteratively altered through the introduction of form features.Form features are first classified based on their effect in changing a basic shape. Geometric reasoning is then used to obtain generalized properties of the form-features' classes. Finally, form-features' classes aresequentially extracted based on the obtained properties.
keywords	CAD, Form-Feature, Feature Extraction
series	journal paper
last changed	2003/05/15 21:33

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	fb63
id	fb63
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol 21, no 1, March 1996
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
series	journal paper
type	normal paper
email
last changed	2008/06/12 16:34

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	e1a1
authors	Rodriguez, G.
year	1996
title	REAL SCALE MODEL VS. COMPUTER GENERATED MODEL
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Advances in electronic design and communication are already reshaping the way architecture is done. The development of more sophisticated and user-friendly Computer Aided Design (CAD) software and of cheaper and more powerful hardware is making computers more and more accessible to architects, planners and designers. These professionals are not only using them as a drafting tool but also as a instrument for visualization. Designers are "building" digital models of their designs and producing photo-like renderings of spaces that do not exist in the dimensional world. The problem resides in how realistic these Computer Generated Models (CGM) are. Moss & Banks (1958) considered realism “the capacity to reproduce as exactly as possible the object of study without actually using it”. He considers that realism depends on: 1)The number of elements that are reproduced; 2) The quality of those elements; 3) The similarity of replication and 4) Replication of the situation. CGM respond well to these considerations, they can be very realistic. But, are they capable of reproducing the same impressions on people as a real space? Research has debated about the problems of the mode of representation and its influence on the judgement which is made. Wools (1970), Lau (1970) and Canter, Benyon & West (1973) have demonstrated that the perception of a space is influenced by the mode of presentation. CGM are two-dimensional representations of three-dimensional space. Canter (1973) considers the three-dimensionality of the stimuli as crucial for its perception. So, can a CGM afford as much as a three-dimensional model? The “Laboratorio de Experimentacion Espacial” (LEE) has been concerned with the problem of reality of the models used by architects. We have studied the degree in which models can be used as reliable and representative of real situations analyzing the Ecological Validity of several of them, specially the Real-Scale Model (Abadi & Cavallin, 1994). This kind of model has been found to be ecologically valid to represent real space. This research has two objectives: 1) to study the Ecological Validity of a Computer Generated Model; and 2) compare it with the Ecological Validity of a Real Scale Model in representing a real space.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:42

_id	7886
authors	Rosenman, M.A. and Gero, J.S.
year	1996
title	Modelling multiple views of design objects in a collaborative CAD environment
source	Computer-Aided Design, Vol. 28 (3) (1996) pp. 193-205
summary	Collaboration between designers in different disciplines is an increasingly important aspect in complex design situations, as exemplified in the AEC domain. CAD systems are essential for handling this complexitybut current CAD modelling technology is directed towards the production of a single product model. In the AEC environment, many disciplines are involved, each with its own concept of the design object. Eachsuch concept must be accommodated in any representation. This paper presents the ideas behind the representation of multiple concepts from an underlying description of a design such that the inter- andintra-discipline views of that design can be formed dynamically. These ideas are based on different functional contexts. Functional subsystems are introduced as an adjunct to design prototypes. An example showshow these functional subsystems are related to the design elements and how they allow for the formation of the various concepts. Thus the representation of the functional properties of design objects is theunderlying basis for the formation of different concepts.
keywords	Conceptual Modelling, Multiple Abstraction Representation, CAD Modelling, Collaborative Design, Functional Representation
series	journal paper
email
last changed	2003/05/15 21:33

_id	664c
authors	Shen, Tie Gang
year	1996
title	Practice & Experience in the Design of Building Model with the Micro-computer
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 245-248
doi	https://doi.org/10.52842/conf.caadria.1996.245
summary	Recently, I joined the competition for the commissions of the general department store of Tongzhou and Tongzhou agricultural trade centre, and succeeded in each competition. The design work was carried out with computer from first to last, with the use of AutoCad 12.0 and 3ds 3.0. I do not intend to introduce the design thoroughly, but I would like to deal with some aspects of CAAD. The following are my major steps and practicable experience of using CAAD. In order to differentiate design of building model with micro-computer and traditional-concept models, the former will be referred to as "screen model”, and the latter "object model”.
series	CAADRIA
last changed	2022/06/07 07:56

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	89ca
authors	Garcia, Renato
year	1996
title	Sound Structure: Using Data Sonification to Enhance Building Structures CAI
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 109-117
doi	https://doi.org/10.52842/conf.caadria.1996.109
summary	Although sound is now extensively used to enrich multimedia applications in the form of simple audio signals, earcons, musical passages and speech, it has unfortunately been under-utilized as a means of data representation. Sound, having many characteristics which enable it to convey multi-dimensional information, provides a broad channel for dynamically presenting data in a learning environment. This paper looks into how teaching concepts of building structures to students of architecture and engineering through computers and multimedia can be enhanced by enlisting the use of appropriate sound parameters. Sound is useful in presenting redundant or supplementary information such as in portraying building structural response to static and dynamic external loading. This process of audiolization, which refers to the use of sounds to present data, can alleviate much of the cognitive load that usually burdens visual displays and has been used to some degree of success in various studies on scientific representation. Where appropriate, audiolization can be synchronized to more established visualization processes to provide more effective multi-modal multimedia systems for the study of building structures.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	8832
authors	MacCallum, C. and Hanna, R.
year	1996
title	DEFLECT: A Computer Aided Learning Package For Teaching Structural Design
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 253-262
doi	https://doi.org/10.52842/conf.ecaade.1996.253
summary	The teaching of structures and its integration with design teaching has been seen as one of the major problems in design education in schools of architecture world-wide. A number of suggestions have been put forward to improve the quality of teaching in structures in architecture. These include the production of computer based learning materials, and the use of the computer as a ‘substitute’ tutor. This paper reports on a SHEFC funded project jointly carried out by the Department of Civil Engineering, University of Paisley, the Mackintosh School of Architecture, and Lamp Software. The project aims to build a computer-assisted learning package on the response of structures to load. The software will be used as an interactive teaching tool for both architectural and engineering students. The package has three levels: Beginners (Level 1), Intermediate (Level 2) and Advanced (Level 3). The first two levels have been completed after continuous feedback from both institutions. Level 1 is geared towards architectural and engineering students to help them understand structural behaviour of building components, such as deflection. Level 2 is a graphical editor that enables students to draw precisely the structure of their designs, investigate the deflection of structural members and identify areas of tension and compression. Level 3 is a design tool aimed at architectural and civil engineering students where they can design and analyse realistic structures by choosing structural members from a library, and specify materials and multiple loads. Prior to its final release, the software package was appraised by students from both institutions. Analysis of results from questionnaires revealed that students expressed a great deal of 'satisfaction' with many of its teaching and learning attributes. The outcome of this project will promote and enhance students’ understanding of the response of structures to load; it will also help students grasp the impact of varying building materials and cross sectional properties on the structural form.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	49d6
authors	Rubinowicz, P.
year	1996
title	Computer Parametric Modeling as a New Design Strategy
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 205-214
summary	Computer Aided Design means not only aiding the preparation of technical documentation for building purposes or for the presentation of architectural design. The application of computer technology has a deeper meaning, when used for the creative modelling of designed objects and spaces. This article will help to define and describe Computer Parametric Modelling as an example of creative computer use. All conclusions presented in this article are based on a four year long working experience using the computer program MODEL; utilising parametric modelling in architectural and town-planning design by the author of this article. This program was created by the author and he is the only user at the present time, but it is hoped that it will be available for general use in the future.
series	plCAD
last changed	1999/04/09 15:30

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	af53
authors	Boyer, E. and Mitgang, L.
year	1996
title	Building community: a new future for architecture education and practice
source	Carnegie Foundation for the Advancement of Teaching
summary	Internships, before and after graduation, are the most essential link connecting students to the world of practice. Yet, by all accounts, internship is perhaps the most troubled phase of the continuing education of architects. During this century, as architectural knowledge grew more complex, the apprenticeship system withered away and schools assumed much of the responsibility for preparing architects for practice. However, schools cannot do the whole job. It is widely acknowledged that certain kinds of technical and practical knowledge are best learned in the workplace itself, under the guidance of experienced professionals. All state accrediting boards require a minimum period of internship-usually about three years-before a person is eligible to take the licensing exam. The National Council of Architectural Registration Boards (NCARB) allows students to earn up to two years of work credit prior to acquisition of an accredited degree. The Intern Development Program (IDP), launched by NCARB and the American Institute of Architects in 1979, provides the framework for internship in some forty states. The program was designed to assure that interns receive adequate mentoring, that experiences are well-documented, and that employers and interns allocate enough time to a range of educational and vocational experiences to prepare students for eventual licensure. As the IDP Guidelines state, "The shift from school to office is not a transition from theory to pragmatism. It is a period when theory merges with pragmatism.... It's a time when you: apply your formal education to the daily realities of architectural practice; acquire comprehensive experience in basic practice areas; explore specialized areas of practice; develop professional judgment; continue your formal education in architecture; and refine your career goals." Whatever its accomplishments, however, we found broad consensus that the Intern Development Program has not, by itself, solved the problems of internship. Though we found mutually satisfying internship programs at several of the firms we visited or heard about around the country, at many others interns told us they were not receiving the continuing education and experience they needed. The truth is that architecture has serious, unsolved problems compared with other fields when it comes to supplying on-the-job learning experiences to induct students into the profession on a massive scale. Medicine has teaching hospitals. Beginning teachers work in actual classrooms, supported by school taxes. Law offices are, for the most part, in a better financial position to support young lawyers and pay them living wages. The architecture profession, by contrast, must support a required system of internship prior to licensure in an industry that has neither the financial resources of law or medicine, the stability and public support of teaching, nor a network of locations like hospitals or schools where education and practice can be seamlessly connected. And many employers acknowledged those problems. "The profession has all but undermined the traditional relationship between the profession and the academy," said Neil Frankel, FAIA, executive vice president of Perkins & Will, a multinational firm with offices in New York, Chicago, Washington, and London. "Historically, until the advent of the computer, the profession said, 'Okay, go to school, then we in the profession will teach you what the real world is like.' With the coming of the computer, the profession needed a skill that students had, and has left behind the other responsibilities." One intern told us she had been stuck for months doing relatively menial tasks such as toilet elevations. Another intern at a medium-sized firm told us he had been working sixty to seventy hours per week for a year and a half. "Then my wife had a baby and I 'slacked off' to fifty hours. The partner called me in and I got called on the carpet for not working hard enough." "The whole process of internship is being outmoded by economics," one frustrated intern told us. "There's not the time or the money. There's no conception of people being groomed for careers. The younger staff are chosen for their value as productive workers." "We just don't have the best structure here to use an intern's abilities to their best," said a Mississippi architect. "The people who come out of school are really problems. I lost patience with one intern who was demanding that I switch him to another section so that he could learn what he needed for his IDP. I told him, 'It's not my job to teach you. You are here to produce.'" What steps might help students gain more satisfying work opportunities, both during and after graduation?
series	other
last changed	2003/04/23 15:14

_id	ddssup9609
id	ddssup9609
authors	Hall, A.C.
year	1996
title	Assessing the Role of Computer Visualisation in Planning Control: a recent case study
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In papers to previous DDSS Conferences, and elsewhere, the author has developed an argument concerning the use of computer visualisation in the planning process. In essence, it proposes that: • visualisation can enable lay persons to play a more effective role and this can result in different and more effective decisions; • the level of realism employed should result from the basic requirements necessary to resolve the issue minimising the cost of production of the images. These points have been tested in repeated examples. The latest one concerns a new site that Anglia Polytechnic University has established in the centre of Chelmsford, UK. A computer model of the new campus showing both the existing and proposed buildings was commissioned from the author by the University for a visit by HM the Queen in June 1995. This model was subsequently adapted for use in the process of obtaining planning consent and the marketing of floorspace for the next building to be constructed. For this purpose, a higher level of realism was requested. The experience of achieving it confirmed the results of the previous research indicating the strong link between realism and cost. It also contributed new insights into the varying expectations of different professionals concerning the role of such a visualisation. The requirement of the architect for demonstrating all aspects of the design required a high level of realism than that required for planning and marketing purposes and was considerably more expensive. The low cost of use for planning purposes should be stressed but surprisingly, the lower level of realism implied may be easier for the lay person than the professional to accept.
series	DDSS
last changed	2003/08/07 16:36

_id	5a8d
authors	Kensek, K., Noble, D., Schiler, M. and Setiadarma, E.
year	1996
title	Shading Mask: a teaching tool for sun shading devices
source	Automation in Construction 5 (3) (1996) pp. 219-231
summary	Sun shading devices provide an opportunity for the designer to control natural lighting, ventilation, and solar gain, all of which provide a benefit to the overall building performance. Through sun path diagrams and shading masks, some of the effects of these solar controls can be demonstrated graphically. This paper describes , a computer program written to help designers understand the basic theory of solar control; generate sun path diagrams; design overhead, side, and eggcrate shading devices; calculate solar angles and shading masks; and provide case studies of actual buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: