Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 484

Reformat results as: short short into frame detailed detailed into frame

_id	2192
authors	Mahdavi, A., Mathew, P., Hartkopf, V. and Loftness, V.
year	1996
title	Bi-directional Inference in Thermal Design
doi	https://doi.org/10.52842/conf.acadia.1996.133
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 133-143
summary	This paper demonstrates a computational bi-directional energy modeling approach for building design development. Conventional simulation tools may be labeled as mono-directional in that they require a more or Iess complete design definition in order to derive performance indicators. However, in certain circumstances, it may be desirable to reverse this process: a bi-directional (or "open") inference mechanism would allow for the identification of those changes in the design variables that would accommodate a desired change in a performance indicator. The performance-to-design mapping process is an ambiguous one: the same performance (e.g. energy use of a building, temperature variations in a space) may be achieved by different design configurations (various wall and window dimensions/properties, building orientation/massing, etc.). As a result, the actual implementation of a bi-directional inference tool is a rather difficult task. The development described in this paper utilizes a preference-based approach that involves the formalization of various external or internal constraints and preferences (such as code and standard requirements, results of post-occupancy studies, individual priorities of designers and their clients, etc.) in terms of normalized numeric scales. After a brief review of the underlying technology for the implementation of the inference engine, the paper demonstrates an actual design session using a bi-directional thermal simulation tool. Specifically, a use-scenario is described in which the designer explores the tradeoffs between various design variables (glazing area, glazing type, and floor mass) in view of the resulting energy performance of a typical residential building. The paper concludes with a discussion of the potential and limitations of the bi-directional approach toward active convergence support for performance-oriented design development.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	911c
authors	Darken, Rudolph P.
year	1996
title	Wayfinding in Large-Scale Virtual Worlds
source	George Washington University
summary	As important as navigation is to human performance in virtual worlds, it is an often overlooked problem in the design process. This dissertation reports an experiment intended to show that real-world wayfinding and environmental design principles are effective in designing virtual worlds which support skilled wayfinding behavior. The design principles are adapted from both the cognitive psychology literature and urban and architectural design methodologies. There are two categories of design principles; those that guide the organizational structure of the environment, and those that guide the use and presentation of maps. The study measures subject performance on a complex searching task in a number of virtual worlds with differing environmental cues. The environments are extremely large and consist of open sea, land, and ships which are used as targets for search tasks. The worlds are augmented with either a radial grid, a map, both, or neither. For each trial, the subject's viewpoint position and orientation was sampled approximately once per second. A verbal protocol with accompanying video was used to elicit information about the search strategies employed. A map drawing exercise followed each trial in order to gain insight to the subject's spatial knowledge (i.e. cognitive map) of the environment. The results show that subjects in the treatment without any additional cues were often disoriented and had extreme difficulty completing the task. The grid was shown to provide superior directional information but both treatments using the map were superior overall due to the geocentric perspective provided. Behaviors associated with each treatment indicate that the cues had a strong effect on both search performance and search strategy. The results suggest that users of large-scale virtual worlds require structure in order to effectively navigate. Augmentations such as direction indicators, maps, and path restriction can all greatly improve both wayfinding performance and overall user satisfaction.
series	thesis:PhD
email
more	http://www.seas.gwu.edu/~sibert/darken/publications/Dissertation_95/thesis.html
last changed	2003/02/12 22:37

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	acb9
authors	Do, Ellen Yi-Luen
year	1996
title	The Right Tool at the Right Time - Drawing as an Interface to Knowledge Based Design Aids
doi	https://doi.org/10.52842/conf.acadia.1996.191
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 191-199
summary	Designers use different symbols and diagrams in their drawings to explore alternatives and to communicate with each other. Therefore, a useful design environment should attempt to infer the designer's intentions from the drawing and, based on this inference, suggest appropriate computational tools for the task at hand. For example, a layout bubble diagram might activate design cases with similar configurations. Scribbles of view lines on a floor plan might bring up a spatial analysis tool. This research aims to develop an integrated digital sketching environment to support early design activities. The paper proposes RT, an intelligent sketch environment that provides the designers with the right tools at the right time.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	e02e
authors	Mahdavi, A., Mathew, P., Lee, S., Brahme, R., Kumar, S., Liu, G., Ries, R. and Wong, N.H.
year	1996
title	On the Structure and Elements of SEMPER
doi	https://doi.org/10.52842/conf.acadia.1996.071
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 71-84
summary	This paper introduces the concept, structure, components, and application results of "SEMPER", an active, multi-aspect computational tool for comprehensive simulation-based design assistance. Specifically, SEMPER seeks to meet the following requirements: a) a methodologically consistent (first- principles-based) performance modeling approach through the entire building design and engineering process; b) seamless and dynamic communication between the simulation models and an object- oriented space-based design environment using the structural homology of various domain representations; and c) "preference-based" performance-to-design mapping technology (bidirectional inference). SEMPER involves the integrated computational modeling of heat transfer, air flow, HVAC system performance, thermal comfort, daylighting and electrical lighting, acoustics, and life-cycle assessment.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	616a
authors	Shih, Wei Ming and Chuang, Ming Chuen
year	1996
title	The Development of a Glasses Design Support System
doi	https://doi.org/10.52842/conf.caadria.1996.091
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 91-97
summary	While looking at glasses, we will have various sensation on their forms, colours, textures etc. These feelings direct us to decide which pair of glasses to buy. This study tries to find out the relationship between human sensation and glasses design; that is, to figure out what kinds of forms will excite what kind of human sensation. By adopting this relationship, we also propose a computer support system which can automatically generate appropriate glasses forms in response to the expectation of consumers. In this study, we first collect several adjectives which can express the human sensation on glasses designs. Then, in an experiment, subjects are asked to evaluate a set of glasses in order to acquire the ratings of those adjectives. We further analyze the formal elements included in different glasses, multivariate analysis and the neural networks are used to decide which design of each element are more likely to excite a specific human sensation. These results then are built as a knowledge base of a support system which includes an inference engine to assist a designer to produce new glasses design. By receiving the input of desired adjectives, this system will find out the most preferred elements for each adjective and integrate them into some appropriate design prototypes for further modification.
series	CAADRIA
last changed	2022/06/07 07:56

_id	ddssar9613
id	ddssar9613
authors	de Groot, E.H. and Louwers, F.H.
year	1996
title	The TIE-system, a KBS for the Evaluation of Thermal Indoor office Environments
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	A Knowledge-Based System [KBS] for the evaluation of Thermal Indoor office Environments [TIE] (in the Netherlands) was the product of a one-year project, undertaken by researchers of the Physical Aspects of the Built Environment group [FAGO] in cooperation with the Knowledge-Based System Section of the TNO-Building & Construction research Institute in Delft. The objective of the project was to develop a KBS capable of evaluating thermal indoor environments of existing or proposed office buildings designs. The approach used in this study was based on a traditional method of predicting thermal sensation by calculating Fanger's 'Predicted Mean Vote' [PMV]. PMV is influenced by four environmental parameters of a room: air temperature, radiant temperature, air velocity and relative humidity, and by two personal parameters of the employees: metabolic rate and clothing insulation. The knowledge required to determine these six parameters was placed in KBS-databases and tables using a KBS-building tool called Advanced Knowledge Transfer System [AKTS]. By questioning the user, the TIE-system is capable of determining the PMV for a particular office room. The system also provides conclusions and advice on improving the thermal comfort. The TIE-system was a pilot-study for the long-term Building Evaluation research project, being undertaken at FAGO, that examines in all aspects of office building performance, and in which KBS may play a major pole.
series	DDSS
last changed	2003/08/07 16:36

_id	f5ee
authors	Erhorn, H., De Boer, J. and Dirksmueller, M.
year	1997
title	ADELINE, an Integrated Approach to Lighting Simulation
source	Proceedings of Right Light 4, 4th European Conference on Energy-Efficient Lighting, pp.99-103
summary	The use of daylighting and artificial lighting simulation programs to calculate complex systems and models in the design practice often is impeded by the fact that the operation of these programs, especially the model input, is extremely complicated and time-consuming. Programs that are easier to use generally do not show the calculation capabilities required in practice. A second obstacle arises as the lighting calculations often do not allow any statements regarding the interactions with the energetic and thermal building performance. Both problems are mainly due to a lacking integration of the design tools of other building design practitioners as well as due to insufficient user interfaces. The program package ADELINE (Advanced Daylight and Electric Lighting Integrated New Environment) being available since May 1996 as completely revised version 2.0 presents a promising approach to solve these problems. This contribution describes the approaches and methods used within the international project IEA Task 21 for a further development of the ADELINE system. Aim of this work is a further improvement of user interfaces based on the inclusion of new dialogs and on a portation of the program system from MS-DOS to the Windows NT platform. Additional focus is laid on the use of recent developments in the field of information technology and experiences gained in other projects on integrated building design systems, like for example EU-COMBINE, in a pragmatical way. An integrated building design system with open standardized interfaces is to be achieved inter alia by using ISOSTEP formats, database technologies and a consequent, object-oriented design.
series	other
last changed	2003/04/23 15:50

_id	57c7
authors	Mathew, Paul
year	1996
title	Integrated Energy Modeling for Computational Building Design Assistance
source	Carnegie Mellon University, Department of Architecture
summary	Insights into the importance of energy modeling in building design have not yet resulted in the sufficient and systematic use of modeling tools in practice. In recent years, there has been considerable discussion on the limitations of simulation tools, and there is a noteworthy consensus as to the nature of the contributing factors (material and time implications, problematic user-interfaces, inefficient data communication structures, poor integration with CAD systems, absence of 'active' design support). This thesis deals with three research questions that are especially pertinent to the quest for active, multi-aspect design and simulation environments: (1) The appropriateness and feasibility of a methodologically consistent performance modeling approach through the entire design process. (2) Strategies for a structurally 'seamless' containment of performance simulation within a computational design environment. (3) Technologies to facilitate dynamic and interactive performance-to-design mapping. At a paradigmatic level, this thesis critically examines the existing responses to each of these questions, and proposes alternative computational frameworks and technologies to overcome some of the system-immanent ('endogenous') limitations of the existing approaches. At an operational level, this thesis demonstrates the proposed solutions by implementing an active thermal simulation module (NOD
series	thesis:PhD
email
last changed	2003/04/15 02:37

_id	2ca3
authors	Curless, Brian and Levoy, Marc
year	1996
title	A Volumetric Method for Building Complex Models from Range Images
source	Stanford University
summary	A number of techniques have been developed for reconstructing surfaces by integrating groups of aligned range images. A desirable set of properties for such algorithms includes: incremental updating, representation of directional uncertainty, the ability to fill gaps in the reconstruction, and robustness in the presence of outliers. Prior algorithms possess subsets of these properties. In this paper, we present a volumetric method for integrating range images that possesses all of these properties. Our volumetric representation consists of a cumulative weighted signed distance function. Working with one range image at a time, we first scan-convert it to a distance function, then combine this with the data already acquired using a simple additive scheme. To achieve space efficiency, we employ a run-length encoding of the volume. To achieve time efficiency, we resample the range image to align with the voxel grid and traverse the range and voxel scanlines synchronously. We generate the final manifold by extracting an isosurface from the volumetric grid. We show that under certain assumptions, this isosurface is optimal in the least squares sense. To fill gaps in the model, we tessellate over the boundaries between regions seen to be empty and regions never observed. Using this method, we are able to integrate a large number of range images (as many as 70) yielding seamless, high-detail models of up to 2.6 million triangles.
series	other
last changed	2003/04/23 15:50

_id	705d
authors	Chen, C.L. Philip and Sen, Xie
year	1996
title	Freehand drawing system using a fuzzy logic concept
source	Computer-Aided Design, Vol. 28 (2) (1996) pp. 77-89
summary	A pen-based drawing system using a fuzzy logic concept has been developed. The Fuzzy Freehand Drawing System (FFDS) can infer human drawing intentions and generate the corresponding geometric primitivesand smooth B-spline curves. FFDS is a pen-based real time drawing system. On the basis of drawing position, speed, and acceleration information, FFDS establishes geometric primitives. Unintentional points areeliminated using fuzzy filtering rules. FFDS analyses the drawn curve with reference models, and obtains the corresponding possibilities. Fuzzy inference rules are used to recognize the correct model. Finally, thecorrect geometric primitives are drawn automatically.
keywords	Free Curves, Freehand Drawing, Fuzzy Logic
series	journal paper
last changed	2003/05/15 21:33

_id	a9ca
authors	Abadi Abbo, Isaac
year	1996
title	EFFECTIVENESS OF MODELS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Architects use many types of models to simulate space either in their design process or as final specifications for building them. These models have been proved useful or effective for specific purposes. This paper evaluates architectural models in terms of five effectiveness components: time of development, cost, complexity, variables simulated and ecological validity. This series of models, used regularly in architecture, are analysed to finally produce a matrix that shows the effectiveness of the different models for specific purposes in architectural design, research and education. Special emphasis is given to three specific models: 1/10 scale, full-scale and computer generated.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2016/02/17 13:47

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	846c
authors	Achten, Henri
year	1996
title	Generic Representations: Intermediate Structures in Computer Aided Architectural Composition.
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 9-24
summary	The paper discusses research work on typological and generic knowledge in architectural design. Architectural composition occurs predominantly through drawings as a medium. Throughout the process, architects apply knowledge. The paper discusses the question how to accommodate this process in computers bearing in mind the medium of drawings and the application of knowledge. It introduces generic representations as one particular approach and discusses its implications by the concept of intermediate structures. The paper concludes with an evaluation of the presented ideas.
keywords
series	other
email
last changed	1999/04/08 17:16

_id	2dbc
authors	Achten, Henri
year	1996
title	Teaching Advanced Architectural Issues Through Principles of CAAD
doi	https://doi.org/10.52842/conf.ecaade.1996.007
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 7-16
summary	The paper discusses the differences between teaching CAAD by using standard software ("off-the-shelf"-software) and teaching the principles of CAAD ("principles-teaching"). The paper distinguishes four kinds of application for design systems in education: social systems, professional systems, educational systems, and innovative systems. The paper furthermore proposes to distinguish between computational issues and architectural issues relative to design systems. It appears that there is not a principled distinction between software-teaching and principles-teaching when it comes to computational issues of design systems. However, when the architectural content of CAAD systems is concerned, then principles of CAAD systems seem to be more appropriate for teaching. The paper presents work on generic representations as a specific case. Generic representations can be used to teach one particular kind of architectural content of design systems. The paper ends with conclusions.
series	eCAADe
email
more	http://www.ds.arch.tue.nl/
last changed	2022/06/07 07:54

_id	63e6
authors	Af Klercker, Jonas
year	1996
title	Visualisation for Clients - One Example of Educating CAAD for Practice
doi	https://doi.org/10.52842/conf.ecaade.1996.017
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 17-24
summary	During the spring term 1996, 13 students of the 3rd and 4th year at the School of Architecture at Lund University had the opportunity to make a one semester CAAD project. 11 students chose the individual exercise to use computer media for developing a small architectural design in interaction with a client. The focus was set more on visualization and the process of communicating ideas, feelings and practical solutions between architect and client and visa versa rather than concentrated on the final product. This paper describes the process of the project and the reflections of the participants. It will discuss problems from the teachers point of view.
series	eCAADe
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:54

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4cda
authors	Akin, O., Cumming, M. , Shealey, M. and Tuncer, B.
year	1996
title	An Electronic Design Assistance Tool for Case Based Representation of Designs
doi	https://doi.org/10.52842/conf.acadia.1996.123
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 123-132
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996, and will be used in future studios, as well.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: