Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 468

Reformat results as: short short into frame detailed detailed into frame

_id	ee14
authors	Fukai, Dennis
year	1996
title	A World of Data: An Animated Construction Information System as a Virtual Hypergraphic Environment
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 267-274
doi	https://doi.org/10.52842/conf.acadia.1996.267
summary	This paper describes research on an animated construction information system organized as a hypergraphic virtual environment. The user enters this environment to interact with the information it contains. A matrix of cubes sits as the gateway to an array of data chambers that give this information its virtual form. A mouse click on one of these cubes leads to a three-dimensional interface that is a simulation of the object to be constructed. Reflective-transparent panels surround the simulation and display two-dimensional projections of its pieces. These panels capture projections of slices through the pieces of the object represented by the simulation. Below the zero plane are slices of floor framing, foundation, excavation, utilities, and soil conditions. Above are ceilings, framing, and roofing. To the sides are finishes, wall framing, fixtures, and elevations. This immersive virtual environment extends as an array of data chambers partitioned by the suspended reflective-transparent panels. Pathways around these partitions lead to secondary chambers that contain sub-simulations of the plumbing, electrical, and HVAC systems. Design-team members access these chambers to coordinate the document's development, review progress, and make changes to the information system. The result is a WORLD of data where graphic information defines both space and time. This breaks with the notion of a construction document as an object-of-exchange and suggests a new focus for the use of computers in the design and construction process.
series	ACADIA
last changed	2022/06/07 07:50

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
doi	https://doi.org/10.52842/conf.ecaade.1996.041
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	aa08
authors	Jakimowicz, Adam
year	1996
title	Education of the Architect - Two Approaches Towards Possible Places of CAD
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 211-220
doi	https://doi.org/10.52842/conf.ecaade.1996.211
summary	This paper discusses the limitations of the most of educational systems of the present, which seem to be no longer sufficient to face the problems of the modern world. This concerns as well architectural education. Computer Aided Design is considered here as a specific case in a wider context of general goals of education. The linear, memory based, cause - effect model of education, where remembering of final effects of the processes is the criterion of teaching efficiency, does not respond to the growing complexity of problems. The task for today is to develop the individual ability to synthesise and creatively explore spheres between separate fields and reconsider the issue of values. This paper therefore emphasises the importance of the person in education, seeing the problem of its full development as a new base and final aim for education as a whole.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2005_b_6a_b
id	caadria2005_b_6a_b
authors	Kai-Tzu Lu, Teng-Wen Chang
year	2005
title	Experience Montage in the Virtual Space
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 426-435
doi	https://doi.org/10.52842/conf.caadria.2005.426
summary	According to three experimental virtual spaces above, the key factor for experience montage is identified—3D collage. General speaking, the theory of montage describes the connection of space and time. Time is a phenomenon of connection of points. Within 3D virtual space, the influence of Experience Montage generated in the experiments above is examined through the Exploration model (representation + rules + memory + policy = search exploration) proposed by Woodbury in 1996. Through browsing and reading, the originally intact virtual space is dissected into pieces and corners. By duplicated, dismantled and reorganized over this dissected space, a new personalized virtual space is then modeled. As a continuation of previous analysis, latter stages of the study use the Exploration model to explain anew the connection among the representation, rules, memory, and policy of Experience Montage.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	6153
authors	Korbel, Wojciech
year	1996
title	The Present and Future, Development of CAD Exploration in the Office of City’s Architect
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 147-157
summary	The usage of computer as a standard tool for an architect became obvious in the past few years. Late 90's along with their rapid development of technology, followed by the growing amount of computer hardware on the market /constantly better and cheaper at the same time/ caused the big changes in the possibilities of project's presentation. The lack of necessary memory to perform proper calculations for high quality rendered images no longer exists. The question raised most commonly by all leading computer software producers concerns the amount of time in which those calculations can be carried out. The race continues while once again, the price of already existing hardware drops rapidly. All these facts make computer more accessible for a potential user such as an architect. Additionally CAD programmers try to make programs as friendly as possible, reducing constantly the amount of time required to learn the program, at least at its bases. As the result, in the next few years, computer may become a standard, at least in some ways of project's presentation. Once again we may face the problem, when the everyday life goes far beyond the expectations. The question appears, how can all kinds of architectural authorities be prepared for constant changes in this field.
series	plCAD
last changed	1999/04/09 15:30

_id	f5a3
authors	Maher, M.L. and Gomez de Silva Garza, A.
year	1996
title	Developing case-based reasoning for structural design
source	IEEE Expert
summary	Case-based systems enable users to retrieve previously known designs from memory and adapt them to fit the current design problem. The four case-based design systems described here illustrate how various implementations achieve design assistance or design automation objectives. Case-based reasoning is a problem-solving technique that makes analogies between a problem and previously encountered situations (cases) relevant to solving the problem. Using CBR as a design process model involves the subtasks of recalling previously known designs from memory and adapting these design cases or subcases to fit the current design context. The detailed development of this process model for a particular design domain proceeds in parallel with the development of the case representation, the case memory organization, and the necessary design knowledge. The selection of an information representation paradigm and the details of its use for a problem-solving domain depend on the intended use of the information, the project information available, and the nature of the domain. CBR could be used to develop and implement a CBR system. Although that sounds circular, if CBR is a viable approach to problem solving, it can be applied to the development of the reasoning system itself. Toward that end, this article presents four "cases" of case-based building design systems that we've developed at the University of Sydney: CaseCAD, CADsyn, Win, and Demex. These systems exemplify alternative case memory contents and organizations and provide insight into different potential implementations of the recall and adaptation subprocesses.
series	journal paper
email
last changed	2003/04/23 15:14

_id	maver_086
id	maver_086
authors	Maver, T.W.
year	1996
title	A Tale of Three Cities
source	VR News. Proceedings of Virtual Heritage Conference 1995 (Bath [UK], Nov 22)
summary	The ABACUS Group has been active for some years in the use of computer graphics and multimedia to represent past, present and future buildings in both urban and rural settings. The three cities discussed during the presentation are Split, in former Yugoslavia - a graphical account of the development of Split from its origin in the Diocletian Palace of the Venetian Empire up to the present day; Edinburgh - a multimedia interface to a large-scale three dimensional computer model of Edinburgh Old Town; and Glasgow - Virtual City developments in the run up to the City of Architecture and Design celebrations in 1999. The presentation concludes with a report on the IMAGEA project - an international initiative to construct an Interactive Multimedia Archive of Great European Architecture.
series	other
type	normal paper
email
last changed	2006/09/11 07:29

_id	2fb2
authors	Murison, Alison
year	1996
title	Computer Based Learning for Architecture Students; A Methodology for Evaluating the Teaching and Learning
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 287-292
doi	https://doi.org/10.52842/conf.ecaade.1996.287
summary	The paper describes a methodology applied to the production, and evaluation of a computer based teaching package. In producing multimedia materials for teaching or for presentation, too much emphasis is sometimes given to the beauty of the images while not enough thought is given to the structure of the material. Is the student or "viewer" led through all the most important information? Can the use of computer based learning improve the quality of the teaching and learning experience? These issues are addressed, using as an example the production and testing of a package designed to complement a course on History of Scottish Architecture intended for senior students and especially to emphasise the Scottish context for exchange students. The package describes Linlithgow Palace in Scotland, showing how the contemporary political links between the Scotland and Italy were influential in the development of Renaissance architecture in Scotland.
series	eCAADe
email
more	http://www.hw.ac.uk/
last changed	2022/06/07 07:59

_id	a9ca
authors	Abadi Abbo, Isaac
year	1996
title	EFFECTIVENESS OF MODELS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Architects use many types of models to simulate space either in their design process or as final specifications for building them. These models have been proved useful or effective for specific purposes. This paper evaluates architectural models in terms of five effectiveness components: time of development, cost, complexity, variables simulated and ecological validity. This series of models, used regularly in architecture, are analysed to finally produce a matrix that shows the effectiveness of the different models for specific purposes in architectural design, research and education. Special emphasis is given to three specific models: 1/10 scale, full-scale and computer generated.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2016/02/17 13:47

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	2dbc
authors	Achten, Henri
year	1996
title	Teaching Advanced Architectural Issues Through Principles of CAAD
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 7-16
doi	https://doi.org/10.52842/conf.ecaade.1996.007
summary	The paper discusses the differences between teaching CAAD by using standard software ("off-the-shelf"-software) and teaching the principles of CAAD ("principles-teaching"). The paper distinguishes four kinds of application for design systems in education: social systems, professional systems, educational systems, and innovative systems. The paper furthermore proposes to distinguish between computational issues and architectural issues relative to design systems. It appears that there is not a principled distinction between software-teaching and principles-teaching when it comes to computational issues of design systems. However, when the architectural content of CAAD systems is concerned, then principles of CAAD systems seem to be more appropriate for teaching. The paper presents work on generic representations as a specific case. Generic representations can be used to teach one particular kind of architectural content of design systems. The paper ends with conclusions.
series	eCAADe
email
more	http://www.ds.arch.tue.nl/
last changed	2022/06/07 07:54

_id	765f
authors	Adam, Holger
year	2002
title	Reinterpretation or replacement? The effects of the information and communication technologies on urban space
source	CORP 2002, Vienna, pp. 345-349
summary	The timid question “Virtual spaces or real places?” forms the core of many debates within the spatial sciences addressing theconsequences of the rapid development of information and communication technologies1 on existing spatial structures. So far several opinions rival each other for the interpretation of current and the prediction of future spatial developments. The spacelessness ofcomputer networks and the possibility to transmit data in real-time have lead visionaries to predict a far-reaching devaluation of timeand space, so questioning the future importance of traditional spatial structures: The “annihilation of distance and time constraints [incomputer networks] could undermine the very rationale for the existence of the city by dissolving the need for physical proximity”(Graham and Marvin 1996: 318). The disappearance of the city into the net, therefore, seems to become a distinct possibility.
series	other
email
more	www.corp.at
last changed	2003/11/21 15:15

_id	4b55
authors	Af Klercker, J. , Ekholm, A. and Fridqvist, S. (Ed.)
year	1996
title	Education for Practice [Conference Proceedings]
source	14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2 / Lund (Sweden) 12-14 September 1996, 425 p.
doi	https://doi.org/10.52842/conf.ecaade.1996
summary	There are many of us trying to make place for CAAD in a natural way in the Curriculum of the Architect school. We would like to make CAAD useful to the students already during their studies. Even if we have the support of our collegues for running courses there is very often no space in the timetable. And even if we have all the entusiasm of our students it is hard to practice your CAAD knowledge on projects where it is not asked for. The education of architects in the use of computers has lead me to try to find "the roots of education of architects" in general. A collegue of mine in a bookshelf of course litterature in Informatics found and put into my hands "Educating the reflective practitioner" by Donald Schön. It lead to an interesting process of personal reflection and discussion within our CAAD team. We think by the way that the theme of the conference points to the heart of the message in Donald Schöns book and we are inviting him as a key note speaker at the Conference.
series	eCAADe
type	normal paper
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:49

_id	63e6
authors	Af Klercker, Jonas
year	1996
title	Visualisation for Clients - One Example of Educating CAAD for Practice
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.1996.017
summary	During the spring term 1996, 13 students of the 3rd and 4th year at the School of Architecture at Lund University had the opportunity to make a one semester CAAD project. 11 students chose the individual exercise to use computer media for developing a small architectural design in interaction with a client. The focus was set more on visualization and the process of communicating ideas, feelings and practical solutions between architect and client and visa versa rather than concentrated on the final product. This paper describes the process of the project and the reflections of the participants. It will discuss problems from the teachers point of view.
series	eCAADe
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:54

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
doi	https://doi.org/10.52842/conf.ecaade.1996.025
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4cda
authors	Akin, O., Cumming, M. , Shealey, M. and Tuncer, B.
year	1996
title	An Electronic Design Assistance Tool for Case Based Representation of Designs
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 123-132
doi	https://doi.org/10.52842/conf.acadia.1996.123
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996, and will be used in future studios, as well.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	d35f
authors	Akin, O.
year	1997
title	Researching Descriptive Models of Design
source	Automation in Construction 7 (2-3) (1998) pp. 97-100
summary	This special double issue is a result of the international symposium and workshop on „Descriptive Models of Design“ wich was held during July 1-5, 1996, at Istanbul Technical University, Istanbul, Turkey. The primary goal of the symposium was to promote greater understanding and to develop recommendations for funding policy and practices in the area of descriptive models of design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c204
authors	Aleksander Asanowicz
year	1996
title	Teaching and Learning - Full Brainwash
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 51-54
doi	https://doi.org/10.52842/conf.ecaade.1996.051
summary	We often speak of changes in design process due to an application of computers. But in my opinion we more often rather speak of lack of changes. Lets hope that some day we will be able to witness full integrity and compatibility of design process and tools applied in it. Quite possible such an integrity may occur in the cyberspace. Nevertheless before that could happen some changes within the teaching methods at faculties of architecture, where despite great numbers of computer equipment used, the students are still being taught as in the XIX century. In terms of achieved results it proves ineffective because application of chalk and blackboard only will always loose to new media, which allow visual perception of dinosaurs in Jurassic Park. Our civilisation is the iconographic one. And that is why teaching methods are about to change. An application of computer as simply a slide projector seems to be way too expensive. New media demands new process and new process demands new media. Lets hope that could be achieved in cyberspace as being a combination of: classic ways of teaching, hypertext, multimedia, virtual reality and a new teaching methodology (as used in Berlitz English School - full brainwash). At our faculty several years ago we experimentally undertook and applied an Integrated Design Teaching Method. A student during design process of an object simultaneously learnt all aspects and functions of the object being designing i.e.: its structure, piping and wiring, material cost and even historic evolution of its form and function. Unfortunately that concept was too extravagant as for the seventies in our reality. At present due to wide implementation of new media and tools in design process we come to consider reimplementation of IDTM again.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: