Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 459

Reformat results as: short short into frame detailed detailed into frame

_id	2dbc
authors	Achten, Henri
year	1996
title	Teaching Advanced Architectural Issues Through Principles of CAAD
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 7-16
doi	https://doi.org/10.52842/conf.ecaade.1996.007
summary	The paper discusses the differences between teaching CAAD by using standard software ("off-the-shelf"-software) and teaching the principles of CAAD ("principles-teaching"). The paper distinguishes four kinds of application for design systems in education: social systems, professional systems, educational systems, and innovative systems. The paper furthermore proposes to distinguish between computational issues and architectural issues relative to design systems. It appears that there is not a principled distinction between software-teaching and principles-teaching when it comes to computational issues of design systems. However, when the architectural content of CAAD systems is concerned, then principles of CAAD systems seem to be more appropriate for teaching. The paper presents work on generic representations as a specific case. Generic representations can be used to teach one particular kind of architectural content of design systems. The paper ends with conclusions.
series	eCAADe
email
more	http://www.ds.arch.tue.nl/
last changed	2022/06/07 07:54

_id	ddssar9604
id	ddssar9604
authors	Demir, Yueksel
year	1996
title	CAD Systems for early design phases or CAD systems for designers' early phases
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most of the problems, related with the use of CAD systems are the results of some general principles; the philosophy that, those systems are based on. Therefore, mainly the relation between these principles and early design phase performance of CAD systems and designers are discussed in this paper. The circumstances of novice CAD user architects in Turkey is considered first. In formation of the research, the knowledge gained during my personal experience based on real cases from the university (education, research) and practice (design, consulting) is used. Beside this the results of a survey including a serious of interviews projecting the opinions of the architects is used. Vendors of commonly used CAD systems were interviewed. In this manner to answer the main question about the relation of "CAD" and "early design phase" the answers of some following questions and facts were investigated: What means CAD for architects? What are the main purposes of using CAD? Are CAD systems sufficient to be used in early design phases in terms of either hardware and / or software, or should we say thinkware?. The advantages and disadvantages of using CAD. The target user fact and its consequences (the difference between general purpose systems and the sophisticated architectural systems). Should we adapt to computerized way of thinking? Is 3D a basic feature? What are the education related problems of CAD? Is software integration problem solved? Modularity concept for CAD systems. What is the minimum time, and the budget required for a start? The illegal software use problem Complaints, demands, needs and thanks of architects? Simply, what do architects expect from CAD during design process and particularly in early phases (both of design and designer)? Do CAD systems match this?
keywords	CAD, Information Technology, Office Automation
series	DDSS
last changed	2003/08/07 16:36

_id	8832
authors	MacCallum, C. and Hanna, R.
year	1996
title	DEFLECT: A Computer Aided Learning Package For Teaching Structural Design
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 253-262
doi	https://doi.org/10.52842/conf.ecaade.1996.253
summary	The teaching of structures and its integration with design teaching has been seen as one of the major problems in design education in schools of architecture world-wide. A number of suggestions have been put forward to improve the quality of teaching in structures in architecture. These include the production of computer based learning materials, and the use of the computer as a ‘substitute’ tutor. This paper reports on a SHEFC funded project jointly carried out by the Department of Civil Engineering, University of Paisley, the Mackintosh School of Architecture, and Lamp Software. The project aims to build a computer-assisted learning package on the response of structures to load. The software will be used as an interactive teaching tool for both architectural and engineering students. The package has three levels: Beginners (Level 1), Intermediate (Level 2) and Advanced (Level 3). The first two levels have been completed after continuous feedback from both institutions. Level 1 is geared towards architectural and engineering students to help them understand structural behaviour of building components, such as deflection. Level 2 is a graphical editor that enables students to draw precisely the structure of their designs, investigate the deflection of structural members and identify areas of tension and compression. Level 3 is a design tool aimed at architectural and civil engineering students where they can design and analyse realistic structures by choosing structural members from a library, and specify materials and multiple loads. Prior to its final release, the software package was appraised by students from both institutions. Analysis of results from questionnaires revealed that students expressed a great deal of 'satisfaction' with many of its teaching and learning attributes. The outcome of this project will promote and enhance students’ understanding of the response of structures to load; it will also help students grasp the impact of varying building materials and cross sectional properties on the structural form.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	fadd
authors	Mullet, Kevin E.
year	1996
title	Designing Visual Interfaces: How to Create Communication -- Oriented Solutions Tutorial 3
source	Proceedings of ACM CHI 96 Conference on Human Factors in Computing Systems 1996 v.2 pp. 332-333
summary	This tutorial describes a number of fundamental techniques applied routinely in communication-oriented visual design. The orientation, process, training, and culture of the visual design disciplines (graphic design, industrial design, interior design, architecture) are essential components of effective interface design. Unfortunately, few software developers or human factors engineers receive any training in these disciplines. This tutorial describes important design rules and techniques internalized by every visual designer through coursework and studio experience. While mastery will indeed require extended practice, the techniques we describe are not difficult to understand and can be immediately applied to real-world problems. We draw our background, training, and influence from the rational, functional, information-oriented perspective of the Modernist design ethic. Because all graphical user interfaces are communication systems, we believe their design should reflect these same values. Our tutorial is organized not along the traditional subdisciplines of color, typography, or ideation, but along the problems of graphical interface design as experienced in commercial software development. We describe basic design principles (the what and why), common errors, and practical techniques (the how) for each of the six major areas outlined below.
series	other
last changed	2002/07/07 16:01

_id	a026
authors	Nagakura, Takehiko
year	1996
title	Form Processing: A System for Architectural Design
source	Harvard University
summary	This thesis introduces a new approach to developing software for formal synthesis in architectural design. It presents theoretical foundations, describes prototype specifications for computable implementation, and illustrates some examples. The approach derives from the observation that architects explore ideas through the use of sequences of drawings. Architects derive each drawing in a sequence from its predecessor by executing some transformation on a portion of the drawing. Thus, a formal design state is established by a sequence of drawings with historical information about their construction through progressive transformations. The proposed system allows an architect to develop a design in three ways. First, a new transformation can be added to a current sequence of drawings. Second, existing sequences can be edited by exchanging their subset sequences. Third, an existing sequence can be revised parametrically by assigning new values to its design variables. The system implements scripts that specify categories of shapes and transformations between any two shape categories. When an instance of a shape category is found in a design, a transformation can replace it with an instance of another shape category. Recursive application of a given set of transformations to an initial shape instance produces a sequence of drawings that represents a formal design state. The system encodes this formal design state as an assembly of all the shape instances used and their relationships (nesting, emergent and replacement). Furthermore, this assembly, called a construction graph, allows the existing sequences to be edited efficiently by exchanging subsets and to be revised parametrically. The advantage of this approach as demonstrated in the examples is that it allows intuitive, rapid and interactive construction of complex designs. Moreover, design knowledge can be captured by scripts that depict heuristic shapes and transformations as well as by assembled construction graphs which depict cases of formal design. Such a reusable and expandable knowledge base is essential for assisting disciplined and creative architectural design.
keywords	Computer Software Development; Architectural Design; Data Processing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddssar9627
id	ddssar9627
authors	Sariyildiz, S., Schwenck, M. and Jander, E.
year	1996
title	Multimedia Teachware in the Field of Architectural Design
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Software systems for educational purposes have been developed and used in many application areas. In this paper we will describe a development in the field of building science. ClAD is a teachware system directed to be used in the education of students of architecture as well as a tool that gives a survey to architects and engineers in the practice. In the first place it provides information about the use of computer science technologies in the building design process. Furthermore, information about the architectural design process itself is included. Based on an analysis of general requirements and specific demands of the application field we describe our solution concept. Very important conclusions are that the system has to integrate the use of all media which are usually used by architects by offering a flexible and well-designed user interface and allowing a high degree of interactive work. After covering the development process as a combination of top down and bottom up strategies we describe the overall structure of ClAD as a modular system which can be extended and updated easily. Finally, we give an overview about some parts of the system to demonstrate the implementation of the concepts mentioned above.
series	DDSS
last changed	2003/08/07 16:36

_id	6ec6
authors	Alsayyad, Nezar, Elliott, Ame and Kalay, Yehuda
year	1996
title	Narrative Models: A Database Approach to Modeling Medieval Cairo
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 247-254
doi	https://doi.org/10.52842/conf.acadia.1996.247
summary	This paper explores the use of three-dimensional simulations to investigate transformations of urban form in medieval Cairo, and lessons about using computers to support historical visualization. Our first attempt to create a single extremely detailed model of Cairo proved unworkable. From this experience we developed a database approach to organizing modeling projects of complex urban environments. The database consists of several complete models at different levels of abstraction. This approach has three advantages over the earlier one: the model is never viewed as incomplete, the framework supports both additive and subtractive chronological studies, and finally, the database is viewed as infinitely expandable. Using modeling software as a tool for inquiry into architectural history becomes more feasible with this new approach.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf57
authors	Anumba, C.J.
year	1996
title	Functional Integration in CAD Systems
source	Advances in Engineering Software, 25, 103-109
summary	This paper examines the issue of integration in CAD systems and argues that for integration to be effective, it must address the functional aspects of a CAD system. It discusses the need for integrated systems and, within a structural engineering context, identifies several facets of integration that should be targeted. These include 2-D drafting and 3-D modelling, graphical and non-graphical design information, the CAD data structure and its user interface, as well as integration of the drafting function with other engineering applications. Means of achieving these levels of integration are briefly discussed and a prognosis for the future development of integrated systems explored. Particular attention is paid to the emergence (and potential role) of `product models' which seek to encapsulate the full range of data elements required to define completely an engineering artefact.
series	journal paper
last changed	2003/04/23 15:14

_id	af94
authors	Anumba, C.J.
year	1996
title	Data structures and DBMS for computer-aided design systems
source	Advances in Engineering Software, 25(2/3), 123-129
summary	The structures for the storage of data in CAD systems influence to a large extent the effectiveness of the system. This paper reviews the wide range of data structures and database management systems (DBMS) available for structuring CAD data. Examples of basic data types are drawn from the MODULA-2 language. The relationship between these basic data types, their composite structures and the classical data models (on which many DBMS are based) is discussed, and the limitations of existing DBMS in modelling CAD data highlighted. A set of requirements for CAD database management systems is drawn up and the emerging role of product models (which seek to encapsulate the totality of data elements required to define fully an engineering artefact) is explored.
series	journal paper
last changed	2003/04/23 15:14

_id	a06c
authors	Batie, David L.
year	1996
title	The Incorporation of Construction History into Architectural History: The HISTCON Interactive Computer Program
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 235-243
doi	https://doi.org/10.52842/conf.acadia.1996.235
summary	Current teaching methods for architectural history seldom embrace building technology as an essential component of study. Accepting the premise that architectural history is a fundamental component to the overall architectural learning environment, it is argued that the study of construction history will further enhance student knowledge. This hypothesis created an opportunity to investigate how the study of construction history could be incorporated to strengthen present teaching methods. Strategies for teaching architectural history were analyzed with the determination that an incorporation of educational instructional design applications using object-oriented programming and hypermedia provided the optimal solution. This evaluation led to the development of the HISTCON interactive, multimedia educational computer program. Used initially to teach 19th Century iron and steel construction history, the composition of the program provides the mechanism to test the significance of construction history in the study of architectural history. Future development of the program will provide a method to illustrate construction history throughout the history of architecture. The study of architectural history, using a construction oriented methodology, is shown to be positively correlated to increased understanding of architectural components relevant to architectural history and building construction.
series	ACADIA
last changed	2022/06/07 07:54

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	acfa
authors	Brown, A., Knight, M. and Nahab, May
year	1996
title	Computer Generated Architectural Images in Practice: what kind and when?
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 79-86
doi	https://doi.org/10.52842/conf.ecaade.1996.079
summary	The production of near-photorealistic images of buildings is becoming increasingly common. The software to produce reasonably sophisticated images being available at affordable prices and the increasing power of generally affordable computers have contributed to this trend. It is also probably the case that the run-of-the-mill architectural practice sees the competition producing this kind of image with a superficially beguiling quality and follow suit. What we ask in this paper is whether we should be more thoughtful about the kind of image used? Should the kind of image chosen to suit the stage of the design that it applies to and the nature of the human agents viewing the image? Of course, in posing the question we imply our answer, that it should. What we do in this paper is to illustrate why we feel it should and what the consequences are for the education of architects who are about to join the world of practice.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	73a3
authors	Case, Michael P.
year	1996
title	Discourse Model for collaborative design
source	Computer-Aided Design, Vol. 28 (5) (1996) pp. 333-345
summary	A Discourse Model, including a structure and a process, is developed that provides software support for collaborative engineering design. The model shares characteristics of other design systems in the literature,including frames, constraints, semantic networks, and libraries of sharable design objects. It contributes a new model for conflict-aware agents, dynamic identification and dissemination of agent interest sets, avirtual workspace language, automatic detection of conflict, and a unique protocol for negotiation that ensures that interested agents have an opportunity to participate. The model is implementation independent andapplicable to many research and commercial design environments currently available. An example scenario is provided in the architecture/engineering/construction domain that illustrates collaboration during theconceptual design of a fire station.
keywords	Agent, Conflict, Discourse Design Collaboration, Concurrent Engineering, Blackboard Architecture, KQML
series	journal paper
last changed	2003/05/15 21:33

_id	7b57
authors	Chase, Scott Curland
year	1996
title	Modeling Designs with Shape Algebras and Formal Logic
source	University of California
summary	A formal, hierarchical model of shape, spatial relations and non-spatial properties is presented, constructed from first principles of geometry, topology and logic. The combination of the two major paradigms used here, shape algebras and logic, is one which has been largely unexplored. The underlying interest is the development of generalized design modeling systems in which the components may be used for a variety of synthesis and recognition problems. The algebras of shape described by Stiny have been shown to be useful in the generation and analysis of designs. The generality of their representations, their non-reliance upon predetermined structure, and their use in combination provide a richness of expression lacking in more traditional representations. The use of formal logic as a specification tool for modeling spatial relations is investigated here. Logic has proven itself useful as a programming and specification tool, providing advantages over traditional procedural programming methods. Among those is the ability to specify the knowledge to be encapsulated in a model without the need to specify data manipulation procedures. It is argued that specification in logic provides a natural method of development. The model is developed by extending the formalisms of shape algebras with the use of logic to make more precise, generalized, parametric definitions of shape and spatial relations than has been previously possible. The value of such a model is demonstrated by the use of these generalized spatial relations for solving typical problems in the fields of geographic information systems and architecture. The advantages of the representations used over more traditional 'kit-of-parts' models is also illustrated.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c2ab
authors	Chiu, Mao Lin
year	1996
title	Prototypes, Variation and Composition: A Formal Design Approach in Urban Housing Design with Computer Assistance
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 287-298
doi	https://doi.org/10.52842/conf.caadria.1996.287
summary	This paper outlines a formal design approach for teaching 3D modeling in computer-aided architecture design studios, and various design principles are used in the process, particularly the generalization, variation and composition. The teaching agenda includes: (1) a formal design approach of housing design, (2) design collaboration, and (3) computer-aided architectural design. // The research agenda includes: (1) incorporation of the formal design approach with the urban infill theory, and (2) development of a computation design method. // The studio project is demonstrated to highlight the implementation of the approach.
keywords	Computer-aided Design, Prototypes, Housing Design, Formal Design Method
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	e2c4
authors	Comair, C., Kaga, A. and Sasada, T.
year	1996
title	Collaborative Design System with Network Technologies in Design Projects
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 269-286
doi	https://doi.org/10.52842/conf.caadria.1996.269
summary	This paper depicts the work of the team of researchers at the Sasada Laboratory in the area of collaborative design and the integration of global area network such as the Internet in order to extend the architectural studio into cyber-space. The Sasada Laboratory is located at the University of Osaka, Faculty of Engineering, Department of Environmental engineering, Japan. The portfolio of the Laboratory is extensive and impressive. The projects which were produced by the men and women of the Laboratory range from the production of databases and computer simulation of several segments of different cities throughout the world to specific studies of architectural monuments. The work performed on the databases was varied and included simulation of past, present, and future events. These databases were often huge and very complex to build. They presented challenges that sometimes seemed impossible to overcome. Often, specialised software, and in some cases hardware, had to be designed on the "fly” for the task. In this paper, we describe the advances of our research and how our work led us to the development of hardware and software. Most importantly, it depicts the methodology of work which our lab undertook. This research led to the birth of what we call the "Open Development Environment” (ODE) and later to the networked version of ODE (NODE). The main purpose of NODE is to allow various people, usually separated by great distances, to work together on a given project and to introduce computer simulation into the working environment. Today, our laboratory is no longer limited to the physical location of our lab. Thanks to global area networks, such as the Internet, our office has been extended into the virtual space of the web. Today, we exchange ideas and collaborate on projects using the network with people that are spread over the five continents.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	911c
authors	Darken, Rudolph P.
year	1996
title	Wayfinding in Large-Scale Virtual Worlds
source	George Washington University
summary	As important as navigation is to human performance in virtual worlds, it is an often overlooked problem in the design process. This dissertation reports an experiment intended to show that real-world wayfinding and environmental design principles are effective in designing virtual worlds which support skilled wayfinding behavior. The design principles are adapted from both the cognitive psychology literature and urban and architectural design methodologies. There are two categories of design principles; those that guide the organizational structure of the environment, and those that guide the use and presentation of maps. The study measures subject performance on a complex searching task in a number of virtual worlds with differing environmental cues. The environments are extremely large and consist of open sea, land, and ships which are used as targets for search tasks. The worlds are augmented with either a radial grid, a map, both, or neither. For each trial, the subject's viewpoint position and orientation was sampled approximately once per second. A verbal protocol with accompanying video was used to elicit information about the search strategies employed. A map drawing exercise followed each trial in order to gain insight to the subject's spatial knowledge (i.e. cognitive map) of the environment. The results show that subjects in the treatment without any additional cues were often disoriented and had extreme difficulty completing the task. The grid was shown to provide superior directional information but both treatments using the map were superior overall due to the geocentric perspective provided. Behaviors associated with each treatment indicate that the cues had a strong effect on both search performance and search strategy. The results suggest that users of large-scale virtual worlds require structure in order to effectively navigate. Augmentations such as direction indicators, maps, and path restriction can all greatly improve both wayfinding performance and overall user satisfaction.
series	thesis:PhD
email
more	http://www.seas.gwu.edu/~sibert/darken/publications/Dissertation_95/thesis.html
last changed	2003/02/12 22:37

_id	5e49
authors	Deering, Michael F.
year	1996
title	HoloSketch: A Virtual Reality Sketching/Animation Tool Special Issue on Virtual Reality Software and Technology
source	Transactions on Computer-Human Interaction 1995 v.2 n.3 pp. 220-238
summary	This article describes HoloSketch, a virtual reality-based 3D geometry creation and manipulation tool. HoloSketch is aimed at providing nonprogrammers with an easy-to-use 3D "What-You-See-Is-What-You-Get" environment. Using head-tracked stereo shutter glasses and a desktop CRT display configuration, virtual objects can be created with a 3D wand manipulator directly in front of the user, at very high accuracy and much more rapidly than with traditional 3D drawing systems. HoloSketch also supports simple animation and audio control for virtual objects. This article describes the functions of the HoloSketch system, as well as our experience so far with more-general issues of head-tracked stereo 3D user interface design.
keywords	Computer Graphics; Picture/Image Generation; Display Algorithms; Computer Graphics; Three-Dimensional Graphics and Realism; Human Factors; 3D Animation; 3D Graphics; Graphics Drawing Systems; Graphics Painting Systems; Man-Machine Interface; Virtual Reality
series	other
last changed	2002/07/07 16:01

_id	ebd6
authors	Dobson, Adrian
year	1996
title	Teaching Architectural Composition Through the Medium of Virtual Reality Modelling
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 91-102
summary	This paper describes an experimental teaching programme to enable architectural students in the early years of their undergraduate study to explore their understanding of the principles of architectural composition, by the creation and experience of architectural form and space in simple virtual reality environments. Principles of architectural composition, based upon the ordering and organisation of typological architectural elements according to established rules of composition, are introduced to the students, through the study of recognised works of architectural design theory. Virtual reality modelling is then used as a tool by the students for the testing and exploration of these theoretical concepts. Compositional exercises involving the creation and manipulation of a family of architectural elements to create form and space within a three dimensional virtual reality environment are carried out using Superscape VRT, a PC based virtual reality modelling system. The project seeks to bring intuitive and immersive computer based design techniques directly into the context of design theory teaching and studio practice, at an early stage in the architectural education process.
series	other
last changed	1999/04/08 17:16

_id	656d
authors	Donath , Dirk and Regenbrecht, Holger
year	1996
title	Using Virtual Reality Aided Design Techniques for Three-dimensional Architectural Sketching
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 199-212
doi	https://doi.org/10.52842/conf.acadia.1996.199
summary	With this paper we would like to introduce a system which supports the early phases of the architectural design process. The system consists of two main components: the software solution "voxDesign" and the physical environment "platform". Our aims are: to formulate, develop, and evaluate an architectural design system through the use of VR (virtual reality) space. The exploration and development of design intentions is supplemented by a new method of three dimensional sketching. In the second part of this paper we will show how these components were used to train students in architecture and design at our university. Parts of this paper were published to the academic public at "Designing Digital Space". (Regenbrecht 1996)
keywords	Virtual Reality, Architectural Design, Human-computer interfaces, Design Techniques
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: