Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 412

Reformat results as: short short into frame detailed detailed into frame

_id	911c
authors	Darken, Rudolph P.
year	1996
title	Wayfinding in Large-Scale Virtual Worlds
source	George Washington University
summary	As important as navigation is to human performance in virtual worlds, it is an often overlooked problem in the design process. This dissertation reports an experiment intended to show that real-world wayfinding and environmental design principles are effective in designing virtual worlds which support skilled wayfinding behavior. The design principles are adapted from both the cognitive psychology literature and urban and architectural design methodologies. There are two categories of design principles; those that guide the organizational structure of the environment, and those that guide the use and presentation of maps. The study measures subject performance on a complex searching task in a number of virtual worlds with differing environmental cues. The environments are extremely large and consist of open sea, land, and ships which are used as targets for search tasks. The worlds are augmented with either a radial grid, a map, both, or neither. For each trial, the subject's viewpoint position and orientation was sampled approximately once per second. A verbal protocol with accompanying video was used to elicit information about the search strategies employed. A map drawing exercise followed each trial in order to gain insight to the subject's spatial knowledge (i.e. cognitive map) of the environment. The results show that subjects in the treatment without any additional cues were often disoriented and had extreme difficulty completing the task. The grid was shown to provide superior directional information but both treatments using the map were superior overall due to the geocentric perspective provided. Behaviors associated with each treatment indicate that the cues had a strong effect on both search performance and search strategy. The results suggest that users of large-scale virtual worlds require structure in order to effectively navigate. Augmentations such as direction indicators, maps, and path restriction can all greatly improve both wayfinding performance and overall user satisfaction.
series	thesis:PhD
email
more	http://www.seas.gwu.edu/~sibert/darken/publications/Dissertation_95/thesis.html
last changed	2003/02/12 22:37

_id	ddssar9611
id	ddssar9611
authors	de Gelder, Johan and Lucardie, Larry
year	1996
title	Criteria for the Selection of Conceptual Modelling Languages for Knowledge Based Systems
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In recent years knowledge is increasingly recognised as a critical production factor for organisations. Performance of activities such as designing, diagnosing, advising and decision making, depend on the availability and accessibility of knowledge. However, the increasing volume and complexity of knowledge endangers its availability and accessibility. By their knowledge processing competence, knowledge based systems containing a structured and explicit representation of knowledge, are expected to solve this problem. In the realisation of a knowledge based system, the phase in which a knowledge model is reconstructed through a conceptual language, is essential. Because the knowledge model has to be an adequate reflection of real-world knowledge, the conceptual language should not only offer sufficient expressiveness for unambiguous knowledge representation, but also provide facilities to validate knowledge on correctness, completeness and consistency. Furthermore, the language should supply facilities to be processed by a computer. This paper discusses fundamental criteria to select a conceptual language for modelling the knowledge of a knowledge based system. It substantiates the claim that the selection depends on the nature of the knowledge in the application domain. By analysing the nature of knowledge using the theory of functional object-types, a framework to compare, evaluate and select a conceptual language is presented. To illustrate the selection process, the paper describes the choice of a conceptual language of a knowledge based system for checking office buildings on fire-safety demands. In this application domain, the language formed by decision tables has been selected to develop the conceptual model. The paper provides an in-depth motivation why decision tables form the best language to model the knowledge in this case.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9608
id	ddssup9608
authors	Gupta, M.K., Groves M. and Moran, J.D.
year	1996
title	An EMIC approach to design: Methodology for creating supportive environments for young children
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The responsibility of the designer is to understand the unique perspective of the users, in order to create functional and efficient environments. The task of creating supportive environments often becomes more difficult when there is discrepancy between the perspective of the designer and that of the user, which is the case when designing spaces for children. The interaction of children with their environment has been identified as the basis of their development Most of the previous research has focused on the perspectives that adults have of spaces for children (etic), rather than an understanding of the child's view as the primary user of the playspace (emic). Children's perceptions are influenced by their physical and cognitive perspectives thus posing a unique challenge for designers. The objective of this study was to learn about the perception and perspective of four-and five-year-olds of their favorite playspaces. The children needed to identify their favorite spaces and also be able to verbalize the activities and meanings associated with these spaces. To avoid adult bias at the onset, the idea of utilizing a Polaroid Captiva camera was formulated, facilitating an extremely short latency period between the child taking the pictures and the opportunity to talk about their favorite playspace. The process was extremely successful, and provides first hand insight into children's perception of their built environment Photographs taken by the young children include many spaces not designed for play. The emerging themes are a source of invaluable information for designers and planners for making informed design decisions and for creating supportive environments.
series	DDSS
email
last changed	2003/08/07 16:36

_id	6237
authors	Kiechle, Horst
year	1996
title	CONSTRUCTING THE AMORPHOUS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Constructing the Amorphous entails the ongoing research into a concept which aims to develop a new understanding for Art, Design and Architecture within society. Rigid, reductivist and confrontational methods based on static geometry, prejudice and competition are to be replaced by dynamic, interdisciplinary and integrative models. In his current art practice the author simulates existing architectural spaces whose interior are re-designed into sculpted environments, based on creative irregularity rather than idealised geometry. All the computer simulated “soft” environments can be realised on an architectural scale as temporary installations with the curved surfaces approximated through planar polygons cut from sheet materials. Within this framework the Darren Knight Gallery Project represents the most recently example. The paper discusses furthermore various 3D modeling options, such as standard CAD representations, high quality rendered video walk-throughs, VRML models and physically produced, full-scale models, made of corrugated cardboard. The cost and equipment requirements necessary for full-scale modeling in cardboard are outlined.
keywords	VRML, CAD, 3D Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:40

_id	sigradi2023_108
id	sigradi2023_108
authors	Passos, Aderson, Jorge, Luna, Cavalcante, Ana, Sampaio, Hugo, Moreira, Eugenio and Cardoso, Daniel
year	2023
title	Urban Morphology and Solar Incidence in Public Spaces - an Exploratory Correlation Analysis Through a CIM System
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1655–1666
summary	The walkability of open spaces has been highlighted in current discussions about the production of designed environments in urban contexts (Matan, 2011). To contribute to this theme, this work selects the environmental comfort of open spaces as its element of study. The production of urban space was investigated, specifically in regard to urban morphology, understanding that city design directly influences environmental comfort (Jacobs, 1996). This work addresses the geographic context of low latitudes, specifically in hot and humid climate zones of Brazil, and, in this context, according to NBR 15220 (national performance standards), shading is one of the main comfort strategies, so solar incidence was the approached environmental phenomenon. Thus, this work presents a digital system that performs exploratory analysis on the correlations between urban form indicators and environmental performance indicators, specifically solar incidence. The method consists of three steps: urban form modeling (1), indicator measurement (2) and correlation analysis (3). In the first stage, different spatial sections of a city in Brazil were represented in the digital environment (1). This work’s implementation instrument is based on a City Information Modeling framework (Beirao et al., 2012). Visual Programming Interface (VPI) and Geographic Information Systems (GIS) tools were used, in addition to a Relational Database Management System (RDBMS). Then, for each urban clipping, the values of morphological indicators and the incidence of solar radiation were measured (2). Based on the values of the indicators, an exploration of their correlation was carried out by statistical methods (3). The results of the correlation analysis and their correspondent scatter plots are presented. Finally, possible applications of the results for the creation of prescriptive urban planning systems are discussed, seeking to promote a sustainable urban environment.
keywords	Urban planning, Environmental comfort, Walkability, Urban morphology, Statistical methods.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ddssar9630
id	ddssar9630
authors	Stark, S.L. and Phillips, R.G.
year	1996
title	Occupational Performance Theory as a Support to Design of the Built Environment for Persons with Disabilities
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Architectural practice should not be considered only a method of building buildings, but also a process of creating places for those who will use them. The interdependent nature of humans and the environment has provided architects and designers with a challenge; to build not only a space, but also a place in which human performance occurs. Environment -- behavior relations are complex and transactional. An understanding of this relationship facilitates the creation of environments that improve the quality of life for the buildings users. A strong understanding of the complexities of the environment is greatly enhanced by knowledge of the performance of the person. Knowledge of the person as a unique being who assumes different roles, possesses skills, and has attributes (abilities) allows the designer a greater respect of the dynamic experience of a person engaged in activity within an environment. The theory of occupational performance supports the understanding of the person and the persons daily tasks. These models describe human performance components and human performance areas. They also acknowledge that the person is engaged in activity within an environment. These models could prove to be invaluable to designers and architects interested in using knowledge of the persons in conjunction with knowledge of the environment to create spaces for people with disabilities.
series	DDSS
last changed	2003/08/07 16:36

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
doi	https://doi.org/10.52842/conf.ecaade.1996.025
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	c204
authors	Aleksander Asanowicz
year	1996
title	Teaching and Learning - Full Brainwash
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 51-54
doi	https://doi.org/10.52842/conf.ecaade.1996.051
summary	We often speak of changes in design process due to an application of computers. But in my opinion we more often rather speak of lack of changes. Lets hope that some day we will be able to witness full integrity and compatibility of design process and tools applied in it. Quite possible such an integrity may occur in the cyberspace. Nevertheless before that could happen some changes within the teaching methods at faculties of architecture, where despite great numbers of computer equipment used, the students are still being taught as in the XIX century. In terms of achieved results it proves ineffective because application of chalk and blackboard only will always loose to new media, which allow visual perception of dinosaurs in Jurassic Park. Our civilisation is the iconographic one. And that is why teaching methods are about to change. An application of computer as simply a slide projector seems to be way too expensive. New media demands new process and new process demands new media. Lets hope that could be achieved in cyberspace as being a combination of: classic ways of teaching, hypertext, multimedia, virtual reality and a new teaching methodology (as used in Berlitz English School - full brainwash). At our faculty several years ago we experimentally undertook and applied an Integrated Design Teaching Method. A student during design process of an object simultaneously learnt all aspects and functions of the object being designing i.e.: its structure, piping and wiring, material cost and even historic evolution of its form and function. Unfortunately that concept was too extravagant as for the seventies in our reality. At present due to wide implementation of new media and tools in design process we come to consider reimplementation of IDTM again.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	40ee
authors	Biagini, Carlo
year	1996
title	CAAD in the Transformability Evaluation of Historical Buildingsof Historical Buildings
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 55-58
doi	https://doi.org/10.52842/conf.ecaade.1996.055
summary	In the execution of a research, which was intended to identify methods and instruments for transformability evaluation of historical buildings, CAAD was usefully employed in the decision-making process at different levels. From an operative point of view, it was fundamental instruments for the acquisition of typomorphological data inherent to pre-existent buildings. It allowed us to create an archive of information which can be easily and flexibly up-dated. In fact the critical evaluation of these buildings is based on the identification of structural patterns which have characterized the typological evolution of the urban structure, and thus the different historical stratifications have to be carefully catalogued, profoundly analyzed and compared one with the other. CAAD was even more effective during the phase of meta-designing checking concerning the choices effected for conversion of old buildings, since it was possible to prefigure different scenarios according to formulated hypotheses and this gave us the opportunity to evaluate their effective practicability in relation to typo- morphological congruence and logical and formal connection between the old building and new design proposals.
series	eCAADe
last changed	2022/06/07 07:54

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	656d
authors	Donath , Dirk and Regenbrecht, Holger
year	1996
title	Using Virtual Reality Aided Design Techniques for Three-dimensional Architectural Sketching
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 199-212
doi	https://doi.org/10.52842/conf.acadia.1996.199
summary	With this paper we would like to introduce a system which supports the early phases of the architectural design process. The system consists of two main components: the software solution "voxDesign" and the physical environment "platform". Our aims are: to formulate, develop, and evaluate an architectural design system through the use of VR (virtual reality) space. The exploration and development of design intentions is supplemented by a new method of three dimensional sketching. In the second part of this paper we will show how these components were used to train students in architecture and design at our university. Parts of this paper were published to the academic public at "Designing Digital Space". (Regenbrecht 1996)
keywords	Virtual Reality, Architectural Design, Human-computer interfaces, Design Techniques
series	ACADIA
email
last changed	2022/06/07 07:55

_id	3905
authors	Duffy, T.M. and Cunningham, D.J.
year	1996
title	Constructivism: Implications for the design and delivery of instruction
source	D.H. Jonassen, (Ed) Handbook of research for educational communications and technology, N.Y; Macmillan Library reference USA
summary	This will be a seminar that examines Constructivist theory as it applies to our thinking about instruction. Many folks think of constructivism as a method of instruction -- it is not. It is a framework for thinking about learning or what it means to come to know. As such, it is a framework for understanding (interpreting) any learning environment as well as a framework for designing instruction. The seminar will be organized around weekly readings. We will examine the alternative constructivist theories, e.g., socio-cultural constructivism and cognitive constructivism, and the pragmatism of Richard Rorty. However, rather than focusing on the differences between these frameworks, our emphasis will be on the implications of the broader, common framework for the design of instruction. Hence we will spend most of the semester discussing strategies for designing and delivering instruction, e.g., the work of Bransford, Collins, Pea, Jonassen, Spiro, Fosnot, Senge, and Schank. We will consider both business and schooling environments for learning -- there is significant work in both domains. There will be particular emphasis of the use of technology in instruction. We will look at the communication, information, and context providing roles of technology as contrasted to the traditional approach of using technology to deliver instruction (to teach). We will also pay particular attention to problem based learning as one instructional model. In PBL there is particular emphasis on the role of the facilitator as a learning coach (process orientation) as opposed to a content provider. There is also a particular emphasis on supporting the development of abductive reasoning skills so that the learner develops the ability to be an effective problem solver in the content domain. The major paper/project for the course will be the design of instruction to train individuals to be learning coaches in a problem based learning or goal based scenario learning environment. That is, how do you support teachers in adapting the role of learning coach (which, of course, requires us to understand what it means to be a learning coach). Design teams will be formed with the teams all working on this same design problem. A comprehensive prototype of the learning environment is required as well as a paper provide the theoretical framework and rationale for the design strategy. While not required, I would expect that computer technology will play a significant role in the design of your learning environment. With that in mind, let me note that it is not required that the prototype be delivered on the computer, i.e., I am not requiring programming skills but rather design skills and so "storyboards" is all that is required.
series	other
last changed	2003/04/23 15:14

_id	diss_fox
id	diss_fox
authors	Fox, M.A.
year	1996
title	Novel Affordances of Computation to the Design Process of Kinetic Structures
source	Massachusetts Institute of Technology, Cambridge, MA
summary	This paper is a discourse into the relationship between the process, computational tools and the role which symbolic structure can play in both. I argue the relationship of the process and tools is dialectic, whereby the tools we utilize in design develop new heuristics, the methodologies in turn, if reflectively understood, can be more aptly facilitated through the development of novel tools. The tools and the process then evolve together. A theory is laid out exploring the human visual information processing systems pertinence to the limitations in mental three-dimensional imaging and transformation operations as relevant to the operations of drawing and mental visualization within the architectural design processes, substantiating the designers necessity to draw (by traditional means, but more importantly here, through the inclusive integration of CAD within the process). The necessity to draw is explored as a representational process to the visual system as predicated upon the existence of a structured internal library of diagram-like representations in our heads. I argue that the ways we utilize such idiosyncratic libraries is predicated upon the ways in which we go about structuring the perceived experienced world around us into symbol systems. And finally, the ways we utilize our reflective understanding of the heuristic transformations of these symbols within the design process in the context of a CAD environment are explored as a means to an enhanced understanding of that which is being designed and consequently as a vehicle for the development of future CAD systems to better facilitate such methodologies of designing. A personal design process of several kinetic structures is carried out in order to arrive at a localized process analysis within computer-aided design environment. Through an interactive, reflective process analysis, conclusions are drawn as to the affordances and limitations of such tools as suggestive of the operations a CAD environment might perform so as to better foster future methodologies of designing. The design experiments are utilized as a vehicle to understand the process. Specifically three kinetic projects are exploited for the prototypical operations they display. When difficulties or mental limitations are encountered with the operations, specific tools are developed to facilitate the limitation or to overcome the problem.
series	thesis:MSc
more	http://www.mafox.net/sm_thesis/Thesis11.pdf
last changed	2003/11/28 07:35

_id	6e6a
authors	Gabova, Mariya
year	1996
title	About Multivariant Designing of Buildings with a Flexible Planning Structure
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 95-97
summary	During designing three-dimensional and spatial structure of the architectural object, computer program has a wide spectre of possibilities allowing to vary its parameters and create effective images for visual presentation. Besides the traditional ways of using the computer in order to perfect the architectural graphic ability during a compositional research, It is also very creative to develop new methods making the design process more effective in finding optimal solutions. The dynamics of social and economic relations in the contemporary society determined the flexibility and mobility of architectural object as a very important, especially for contemporary industrial architecture. The priority direction on this field is designing buildings with flexible planning spatial structure.
series	plCAD
last changed	1999/04/09 15:30

_id	4171
authors	Gero, John S. and Maher, Mary Lou
year	1996
title	Current CAAD Research at the Key Centre of Design Computing University of Sydney
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 35-52
doi	https://doi.org/10.52842/conf.caadria.1996.035
summary	Designing is one of the most significant of human acts. It is one of the bases for change in our society. However, designers are amongst the least recongised for society’s change agents. Surprisingly, given that designing has been occurring for many millennia, our understanding of the processes of designing is remarkably limited. Part of our understanding of designing comes not only from studying human designers as they design but from postulating design methods which describe some aspect of the design process without claiming to model the processes used by human designers. The early approaches to design methods were prescriptive when applied to human designers. More recently, design methods have been formalised not as humano-centred processes but as processes capable of computer implementation. Amongst the goals of these endeavours are to develop a better understanding of the processes of designing, to develop methods which can be computerised and to aid human designers through the introduction of novel methods which have no human counterpart. Much of this research is driven by the fact that human designs are very often incomplete, inadequate or just plainly poorly conceived for the task they are meant to address.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	0b25
authors	Gross , Mark D.
year	1996
title	Elements That Follow Your Rules: Constraint Based CAD Layout
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 115-122
doi	https://doi.org/10.52842/conf.acadia.1996.115
summary	The paper reports on CKB (Construction Kit Builder) a prototype CAD program that designers can program with positioning and assembly rules for layout of building elements. The program's premise is that designing can be understood as a process of making and following rules for the selection, position, and dimension of built and space elements. CKB operates at two distinct levels of design: the technical system designer, who makes the rules, and the end designer, who lays out the material and space elements to make a design. CKB supports two kinds of rules with constraint based programming techniques: grid and zone based position rules, and assembly rules that position elements with respect to one another. The paper discusses the rationale for CKB and describes its implementation.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	934f
authors	Gross, M.D.
year	1996
title	The Electronic Cocktail Napkin – a computational environment for working with design diagrams
source	Design Studies, 17 (1), pp. 53-69
summary	The Electronic Cocktail Napkin is an experimental computer-based environment for sketching and diagramming in conceptual design. The project's goal is to develop a computational drawing environment to support conceptual designing in a way that leads smoothly from diagrams to more formal and structured representations of schematic design. With computational representations for conceptual designs, computer-supported editing, critiquing, analysis, and simulation can be employed earlier in the design process, where it can have a greater impact on outcomes. The paper describes the Electronic Cocktail Napkin program - its recognition and parsing of diagrams and management of spatial constraints, its drawing environment, and two experimental query-by-diagram schemes for retrieving information from architectural databases.
series	journal paper
email
last changed	2003/04/23 15:50

_id	fb63
id	fb63
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol 21, no 1, March 1996
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
series	journal paper
type	normal paper
email
last changed	2008/06/12 16:34

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	4fc4
authors	Jakimowicz, Adam
year	1996
title	Towards Affective Architectural Computing: An Additional Element in CAAD
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 121-135
summary	The sphere of computing, in general, is the sphere of confusion. First, computers', thanks to (or because o) the indirect way of communicating "with" them, have not become yet the obvious and natural extension of human abilities - as TV set, radio or cars already have. It is probably because of the feeling, that they are, more or less, for specialists and that they require special knowledge or skills. In a way it is true, but surely it will change within a few years, when they become everyday tools of education at schools or just toys for children. Second, there is also the feeling or wish, that every computer is able to do everything we want - from, lets say, writing a letter, washing the dishes to very complex things as, for example, designing architecture. This is the dream of universal artificial intelligence, which should be a perfect servant, which not only listens to, but also predicts our wishes.
series	plCAD
email
last changed	2003/05/17 10:01

For more results click below: