Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 489

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar9620
id	ddssar9620
authors	Koutamanis, Alexander
year	1996
title	Elements and coordinating devices in architecture: An initial formulation
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Design representations of the built environment are essentially atomistic. A design is represented by its atomic components which may vary according to abstraction level, their properties and, if possible, their relationships. The utility of such representations has been amply demonstrated in academic research. However, the transition to practice means a substantial growth of the size of these representations in order to cover the many abstraction levels and the multiple aspects involved in the design and the management of the built environment. In most cases the complexity of larger representations renders them unmanageable for both computers and humans. The paper outlines an approach which enriches the atomistic basis of the representation with connected but independent coordinating devices. This facilitates the transformation of the basic relational representations into multilevel structures where each level corresponds to different aspects and abstraction scales. Coordinating devices are instrumental for the representation of multilateral relationships and abstract spatial schemata which precede or supersede the placement and arrangement of elements.
series	DDSS
last changed	2003/08/07 16:36

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
doi	https://doi.org/10.52842/conf.ecaade.1996.025
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	d7eb
authors	Bharwani, Seraj
year	1996
title	The MIT Design Studio of the Future: Virtual Design Review Video Program
source	Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary	The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series	other
last changed	2002/07/07 16:01

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fb63
id	fb63
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol 21, no 1, March 1996
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
series	journal paper
type	normal paper
email
last changed	2008/06/12 16:34

_id	ddssar9617
id	ddssar9617
authors	Jabi, Wassim M.
year	1996
title	Domain-Specific Tools for Collaboration in Architectural Design
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	By using a semantically significant and parsimonious representation of collaborative work in architecture an approach is demonstrated that allows the construction of a computer environment that can support collaborative design among geographically dispersed participants. A principal characteristic of this approach is a shift away from a focus on multi-user access to shared databases towards a shared protocol of interaction that is independent of implementation and storage schemes. To arrive at the components of this protocol an analysis of the nature of collaborative design was conducted in order to derive its syntactic and semantic structures. This paper will detail the argument put forth and demonstrate a possible solution through a discussion of the elements of a protocol of interaction and a brief description of a prototype Synchronous Collaborative Design Environment (SYCODE) that was implemented on two heterogeneous computer systems at distant sites.
series	DDSS
last changed	2003/08/07 16:36

_id	fabd
authors	Jabi, Wassim
year	1996
title	Domain-Specific Tools for Collaboration in Architectural Design
source	Proceedings of the Third International Conference on Design and Decision Support Systems in Architecture and Urban Planning. Spa, Belgium: Technical University of Eindhoven, 1996, pp. 248-259
summary	By using a semantically significant and parsimonious representation of collaborative work in architecture an approach is demonstrated that allows the construction of a computer environment that can support collaborative design among geographically dispersed participants. A principal characteristic of this approach is a shift away from a focus on multi-user access to shared databases towards a shared protocol of interaction that is independent of implementation and storage schemes. To arrive at the components of this protocol an analysis of the nature of collaborative design was conducted in order to derive its syntactic and semantic structures. This paper will detail the argument put forth and demonstrate a possible solution through a discussion of the elements of a protocol of interaction and a brief description of a prototype Synchronous Collaborative Design Environment (SYCODE) that was implemented on two heterogeneous computer systems at distant sites.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	096e
authors	Papamichael, K., Porta, J.L., Chauvet, H., Collins, D., Trzcinski, T. , Thorpe, J. and Selkowitz, S.
year	1996
title	The Building Design Advisor
doi	https://doi.org/10.52842/conf.acadia.1996.085
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 85-97
summary	The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to benefit from the capabilities of multiple tools. The BDA provides a graphical user interface that consists of two main elements: the Building Browser and the Decision Desktop. The Browser allows building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA. The BDA is implemented as a Windows-based application for personal computers. Its initial version is linked to a Schematic Graphic Editor (SGE), which allows designers to quickly and easily specify the geometric characteristics of building components and systems. For every object created in the SGE, the BDA supplies “smart” default values from a Prototypical Values Database (PVD) for all non-geometric parameters required as input to the analysis and visualization tools linked to the BDA. In addition to the SGE and the PVD, the initial version of the BDA is linked to a daylight analysis tool, an energy analysis tool, and a multimedia Case Studies Database (CSD). The next version of the BDA will be linked to additional tools, such as a photo-accurate rendering program and a cost analysis program. Future versions will address the whole building life-cycle and will be linked to construction, commissioning and building monitoring tools.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
doi	https://doi.org/10.52842/conf.acadia.2007.284
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ddssar9633
id	ddssar9633
authors	Szalapaj, Peter and Kane, Andrew
year	1996
title	Techniques of Superimposition
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper addresses the issues of 2-D and 3-D image manipulation in the context of a Computational Design Formulation System. The central feature of such a system is the ability to bring together two or more design objects in the same reference space for the purpose of analysis. Studies of traditional design methods has revealed the effectiveness of this technique of superimposition. This paper describes ways in which superimposition can be achieved, and, in particular, focuses on a range of domain-independent knowledge-based graphical operators that enable the decomposition of complex design forms into simpler aspects (secondary models) that can then be superimposed and/or analysed from a design-theoretic point of view. Examples of domain-independent knowledge-base graphical operators include object selection, planar bisection, 2-D closure (the grouping of lines into regions), aggregation (the decomposition of 2-D regions into aggregations of lines), spatial bisection, 3-D closure (the grouping of 2-D regions into volumes), 3-D aggregation (the decomposition of volumes into aggregations of 2-D regions). The representation of these operators is dependent upon the notion of a parameterisable volume, thus avoiding the need for translations between multiple representations of graphical objects by providing a common representation form for all objects. Secondary models can therefore subsequently be manipulated either through subtractive procedures (e.g. carving voids from solids), or by additive ones (e.g. assembling given design elements), or by other means such as transformation or distortion. The same techniques of superimposition can also be used to support the visualisation of design forms in two ways: by the juxtaposition of plans and sections with the 3-D form; by the multiple superimposition of alternative design representations e.g. structural schematic, parti schematic, volumetric schematic and architectural model.
keywords	Design Formulation, Superimposition, Primary Model, Secondary Model, Parameterisable Volume
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9621
id	ddssup9621
authors	Wang, D.
year	1996
title	Towards An Informatics Framework for Sustainability Analysis in Urban Transportation Planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	An informatics framework for sustainability analysis in urban transportation planning is developed in this paper. The framework consists of sustainability indicators, structured impact analysis, a general procedure, and a conceptual informatics framework which organises all these elements in a decision support system. In deriving sustainability indicators and structuring impact analysis, specific attention is given to comparisons between a trip-based approach and an activity-based approach, so that drawbacks of the conventional trip-based approach and potential of the activity-based approach are manifested in the context of sustainability analysis. Implications to the design of a decision support system for sustainability analysis are also discussed in terms of database and model base designs.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddssup9622
id	ddssup9622
authors	Witlox, F.J.A., Arentze, T.A. and Timmermans, H.J.P.
year	1996
title	Constructing and consulting fuzzy decision tables
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In this paper, we investigate a methodological issue associated with the use of decision tables (DTs). In particular, a predominant problem concerns the categorization of the condition and action states in a DT. This categorization is assumed to exhibit a discrete (or crisp) character. Although sharply defined discrete categorizations imply an. accurate and precise decision-making, in many real time problems it proves to be a too stringent and severe assumption to impose on the choice maker. In order to solve this problem, we will enhance the DT formalism to incorporate elements from the theory of fuzzy sets. The construction of a fuzzy decision table (FDT) is explained in a step-by-step manner and illustrated by means of a brief example in the field of location theory. The paper concludes with an assessment of how to use and consult a FDT.
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	eb87
authors	Bhavnani, S.K.
year	1996
title	How Architects Draw with Computers: A Cognitive Analysis of Real-World CAD Interactions
source	Carnegie Mellon University, School of Architecture and School of Computer Science
summary	New media throughout history have passed through a period of transition during which users and technologists took many years to understand and exploit the medium's potential. CAD appears to be passing through a similar period of transition; despite huge investments by vendors and users, CAD productivity remains difficult to achieve. To investigate if history can provide any insights into this problem, this thesis begins with an examination of well-known examples from history. The analysis revealed that, over time, users had developed efficient strategies which were based on powers and limitations of tools; delegation strategies exploited powers provided by tools, and circumvention strategies attempted to overcome their limitations. These insights on efficient strategies were used to investigate the CAD productivity problem based on four research questions: 1. How do architects currently use CAD systems to produce drawings? 2. What are the effects of current CAD usage on product and performance? 3. What are the possible causes of current CAD usage? 4. What are the capabilities of the CAD medium and how can they be used efficiently? The above four questions were addressed through the qualitative, quantitative, and cognitive analysis of data collected during an ethnographic study of architects working in their natural environment. The qualitative and quantitative analysis revealed that users missed many opportunities to use strategies that delegated iteration to the computer. The cognitive analysis revealed that missed opportunities to use such delegation strategies caused an increase in execution time, and an increase in errors many of which went undetected leading to the production of inaccurate drawings. These analyses pointed to plausible cognitive and contextual explanations for the inefficient use of CAD systems, and to a framework to identify and teach efficient CAD strategies. The above results were found to be neither unique to the CAD domain, nor to the office where the data were collected. The generality of these results motivated the identification of seven claims towards a general theory to explain and identify efficient strategies for a wide range of devices. This thesis contributes to the field of architecture by providing a detailed analysis of real-world CAD usage, and an approach to improve the performance of CAD users. The thesis also contributes to the field of human-computer interaction by demonstrating the generality of these results and by laying the framework for a general theory of efficient strategies which could be used to improve the performance of users of current and future computer applications.
series	thesis:PhD
email
last changed	2003/04/15 13:36

_id	ec0e
authors	Engeli, M. and Kurmann, D.
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	H.J.P. Timmermans (ed.), Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol. 1: Architecture Proceedings, pp. 132-142
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to experience rooms and 3D input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 3D model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	other
last changed	2003/04/23 15:50

_id	ddssar9609
id	ddssar9609
authors	Engeli, Maia and Kurmann, David
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to expe-rience rooms and 31) input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 31) model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	DDSS
last changed	2003/08/07 16:36

_id	c6dd
authors	Fruchter, Renate
year	1996
title	COMPUTER INTEGRATED ARCHITECTURE/ENGINEERING/CONSTRUCTION PROJECT-CENTERED LEARNING ENVIRONMENT
doi	https://doi.org/10.52842/conf.acadia.1996.227
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 227-234
summary	This paper describes an on-going effort, initiated at Stanford's Civil Engineering Department, to develop, implement, and test a new and innovative "Computer Integrated Architecture./Engineering/Construction" (A/E/C) course. The course takes a multi-site, cross- disciplinary, project-centered, team-oriented approach to teaching. The paper presents the motivation, methodology, computational infrastructure, and initial observations in the experimental A/E/C course. The course is sponsored by NSF Synthesis Coalition and is the result of the collaborative effort of faculty and researchers from Civil Engineering Department at Stanford University, and Architecture Department and Civil Engineering Department, at UC Berkeley. In this computer integrated A/EIC environment a new generation of architecture, engineering, construction students learns how to team up with other disciplines and the advantage of the emerging information technologies for collaborative work in order to design and build higher quality buildings faster.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ddss2006-hb-187
id	DDSS2006-HB-187
authors	Lidia Diappi and Paola Bolchi
year	2006
title	Gentrification Waves in the Inner-City of Milan - A multi agent / cellular automata model based on Smith's Rent Gap theory
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 187-201
summary	The aim of this paper is to investigate the gentrification process by applying an urban spatial model of gentrification, based on Smith's (1979; 1987; 1996) Rent Gap theory. The rich sociological literature on the topic mainly assumes gentrification to be a cultural phenomenon, namely the result of a demand pressure of the suburban middle and upper class, willing to return to the city (Ley, 1980; Lipton, 1977, May, 1996). Little attempt has been made to investigate and build a sound economic explanation on the causes of the process. The Rent Gap theory (RGT) of Neil Smith still represents an important contribution in this direction. At the heart of Smith's argument there is the assumption that gentrification takes place because capitals return to the inner city, creating opportunities for residential relocation and profit. This paper illustrates a dynamic model of Smith's theory through a multi-agent/ cellular automata system approach (Batty, 2005) developed on a Netlogo platform. A set of behavioural rules for each agent involved (homeowner, landlord, tenant and developer, and the passive 'dwelling' agent with their rent and level of decay) are formalised. The simulations show the surge of neighbouring degradation or renovation and population turn over, starting with different initial states of decay and estate rent values. Consistent with a Self Organized Criticality approach, the model shows that non linear interactions at local level may produce different configurations of the system at macro level. This paper represents a further development of a previous version of the model (Diappi, Bolchi, 2005). The model proposed here includes some more realistic factors inspired by the features of housing market dynamics in the city of Milan. It includes the shape of the potential rent according to city form and functions, the subdivision in areal submarkets according to the current rents, and their maintenance levels. The model has a more realistic visualisation of the city and its form, and is able to show the different dynamics of the emergent neighbourhoods in the last ten years in Milan.
keywords	Multi agent systems, Housing market, Gentrification, Emergent systems
series	DDSS
last changed	2006/08/29 12:55

_id	a73a
authors	Streich, Bernd
year	1996
title	3D-Scanning and 3D-Printing for Media Experimental Design Work in Architecture
doi	https://doi.org/10.52842/conf.acadia.1996.183
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 183-190
summary	Architects and designers use multiple media to explore and express design solutions. The physical model remains one of the most important media to represent the architect’s work that cannot completely be substituted by computer graphics. The experimental use of various media is of major Importance for architects. Nevertheless, the author of this article is convinced that architects and designers will continue to make physical models. During the design process. however, the designer might wish to transfer the design idea into the computer. If he has already made a physical model, it will take him much time to recreate the same model on the screen by means of his CAD programs. This would be different if it were possible to digitize the existing physical model and then to continue designing on the computer. In this paper, the author describes some 3D-scanning methods based, on computer tomograms. Also the inverse combination of modeling and digitizing would be useful. So-called 3D-printing methods could help architects to transform their model on the screen into physical models during or at the end of the computer supported design process. In this paper, the author will give a survey on how designers can use input and output devices to generate digital data from a physical model and - vice versa - to transform a digital design solution into a physical model. The reader will get an impression of both procedures from the examples given.
series	ACADIA
email
last changed	2022/06/07 07:56

For more results click below: