Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 465

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	9e3d
authors	Cheng, F.F., Patel, P. and Bancroft, S.
year	1996
title	Development of an Integrated Facilities Information System Based on STEP - A Generic Product Data Model
source	The Int. Journal of Construction IT 4(2), pp.1-13
summary	A facility management system must be able to accommodate dynamic change and based on a set of generic tools. The next generation of facility management systems should be STEP conforming if they are to lay the foundation for fully integrated information management and data knowledge engineering that will be demanded in the near future in the new era of advanced site management. This paper describes an attempt to meet such a specification for an in-house system. The proposed system incorporates the latest technological advances in information management and processing. It pioneered an exchange architecture which presents a new class of system, in which the end-user has for the first time total flexibility and control of the data never before automated in this way.
series	journal paper
last changed	2003/05/15 21:45

_id	ga0026
id	ga0026
authors	Ransen, Owen F.
year	2000
title	Possible Futures in Computer Art Generation
source	International Conference on Generative Art
summary	Years of trying to create an "Image Idea Generator" program have convinced me that the perfect solution would be to have an artificial artistic person, a design slave. This paper describes how I came to that conclusion, realistic alternatives, and briefly, how it could possibly happen. 1. The history of Repligator and Gliftic 1.1 Repligator In 1996 I had the idea of creating an “image idea generator”. I wanted something which would create images out of nothing, but guided by the user. The biggest conceptual problem I had was “out of nothing”. What does that mean? So I put aside that problem and forced the user to give the program a starting image. This program eventually turned into Repligator, commercially described as an “easy to use graphical effects program”, but actually, to my mind, an Image Idea Generator. The first release came out in October 1997. In December 1998 I described Repligator V4 [1] and how I thought it could be developed away from simply being an effects program. In July 1999 Repligator V4 won the Shareware Industry Awards Foundation prize for "Best Graphics Program of 1999". Prize winners are never told why they won, but I am sure that it was because of two things: 1) Easy of use 2) Ease of experimentation "Ease of experimentation" means that Repligator does in fact come up with new graphics ideas. Once you have input your original image you can generate new versions of that image simply by pushing a single key. Repligator is currently at version 6, but, apart from adding many new effects and a few new features, is basically the same program as version 4. Following on from the ideas in [1] I started to develop Gliftic, which is closer to my original thoughts of an image idea generator which "starts from nothing". The Gliftic model of images was that they are composed of three components: 1. Layout or form, for example the outline of a mandala is a form. 2. Color scheme, for example colors selected from autumn leaves from an oak tree. 3. Interpretation, for example Van Gogh would paint a mandala with oak tree colors in a different way to Andy Warhol. There is a Van Gogh interpretation and an Andy Warhol interpretation. Further I wanted to be able to genetically breed images, for example crossing two layouts to produce a child layout. And the same with interpretations and color schemes. If I could achieve this then the program would be very powerful. 1.2 Getting to Gliftic Programming has an amazing way of crystalising ideas. If you want to put an idea into practice via a computer program you really have to understand the idea not only globally, but just as importantly, in detail. You have to make hard design decisions, there can be no vagueness, and so implementing what I had decribed above turned out to be a considerable challenge. I soon found out that the hardest thing to do would be the breeding of forms. What are the "genes" of a form? What are the genes of a circle, say, and how do they compare to the genes of the outline of the UK? I wanted the genotype representation (inside the computer program's data) to be directly linked to the phenotype representation (on the computer screen). This seemed to be the best way of making sure that bred-forms would bare some visual relationship to their parents. I also wanted symmetry to be preserved. For example if two symmetrical objects were bred then their children should be symmetrical. I decided to represent shapes as simply closed polygonal shapes, and the "genes" of these shapes were simply the list of points defining the polygon. Thus a circle would have to be represented by a regular polygon of, say, 100 sides. The outline of the UK could easily be represented as a list of points every 10 Kilometers along the coast line. Now for the important question: what do you get when you cross a circle with the outline of the UK? I tried various ways of combining the "genes" (i.e. coordinates) of the shapes, but none of them really ended up producing interesting shapes. And of the methods I used, many of them, applied over several "generations" simply resulted in amorphous blobs, with no distinct family characteristics. Or rather maybe I should say that no single method of breeding shapes gave decent results for all types of images. Figure 1 shows an example of breeding a mandala with 6 regular polygons: Figure 1 Mandala bred with array of regular polygons I did not try out all my ideas, and maybe in the future I will return to the problem, but it was clear to me that it is a non-trivial problem. And if the breeding of shapes is a non-trivial problem, then what about the breeding of interpretations? I abandoned the genetic (breeding) model of generating designs but retained the idea of the three components (form, color scheme, interpretation). 1.3 Gliftic today Gliftic Version 1.0 was released in May 2000. It allows the user to change a form, a color scheme and an interpretation. The user can experiment with combining different components together and can thus home in on an personally pleasing image. Just as in Repligator, pushing the F7 key make the program choose all the options. Unlike Repligator however the user can also easily experiment with the form (only) by pushing F4, the color scheme (only) by pushing F5 and the interpretation (only) by pushing F6. Figures 2, 3 and 4 show some example images created by Gliftic. Figure 2 Mandala interpreted with arabesques Figure 3 Trellis interpreted with "graphic ivy" Figure 4 Regular dots interpreted as "sparks" 1.4 Forms in Gliftic V1 Forms are simply collections of graphics primitives (points, lines, ellipses and polygons). The program generates these collections according to the user's instructions. Currently the forms are: Mandala, Regular Polygon, Random Dots, Random Sticks, Random Shapes, Grid Of Polygons, Trellis, Flying Leap, Sticks And Waves, Spoked Wheel, Biological Growth, Chequer Squares, Regular Dots, Single Line, Paisley, Random Circles, Chevrons. 1.5 Color Schemes in Gliftic V1 When combining a form with an interpretation (described later) the program needs to know what colors it can use. The range of colors is called a color scheme. Gliftic has three color scheme types: 1. Random colors: Colors for the various parts of the image are chosen purely at random. 2. Hue Saturation Value (HSV) colors: The user can choose the main hue (e.g. red or yellow), the saturation (purity) of the color scheme and the value (brightness/darkness) . The user also has to choose how much variation is allowed in the color scheme. A wide variation allows the various colors of the final image to depart a long way from the HSV settings. A smaller variation results in the final image using almost a single color. 3. Colors chosen from an image: The user can choose an image (for example a JPG file of a famous painting, or a digital photograph he took while on holiday in Greece) and Gliftic will select colors from that image. Only colors from the selected image will appear in the output image. 1.6 Interpretations in Gliftic V1 Interpretation in Gliftic is best decribed with a few examples. A pure geometric line could be interpreted as: 1) the branch of a tree 2) a long thin arabesque 3) a sequence of disks 4) a chain, 5) a row of diamonds. An pure geometric ellipse could be interpreted as 1) a lake, 2) a planet, 3) an eye. Gliftic V1 has the following interpretations: Standard, Circles, Flying Leap, Graphic Ivy, Diamond Bar, Sparkz, Ess Disk, Ribbons, George Haite, Arabesque, ZigZag. 1.7 Applications of Gliftic Currently Gliftic is mostly used for creating WEB graphics, often backgrounds as it has an option to enable "tiling" of the generated images. There is also a possibility that it will be used in the custom textile business sometime within the next year or two. The real application of Gliftic is that of generating new graphics ideas, and I suspect that, like Repligator, many users will only understand this later. 2. The future of Gliftic, 3 possibilties Completing Gliftic V1 gave me the experience to understand what problems and opportunities there will be in future development of the program. Here I divide my many ideas into three oversimplified possibilities, and the real result may be a mix of two or all three of them. 2.1 Continue the current development "linearly" Gliftic could grow simply by the addition of more forms and interpretations. In fact I am sure that initially it will grow like this. However this limits the possibilities to what is inside the program itself. These limits can be mitigated by allowing the user to add forms (as vector files). The user can already add color schemes (as images). The biggest problem with leaving the program in its current state is that there is no easy way to add interpretations. 2.2 Allow the artist to program Gliftic It would be interesting to add a language to Gliftic which allows the user to program his own form generators and interpreters. In this way Gliftic becomes a "platform" for the development of dynamic graphics styles by the artist. The advantage of not having to deal with the complexities of Windows programming could attract the more adventurous artists and designers. The choice of programming language of course needs to take into account the fact that the "programmer" is probably not be an expert computer scientist. I have seen how LISP (an not exactly easy artificial intelligence language) has become very popular among non programming users of AutoCAD. If, to complete a job which you do manually and repeatedly, you can write a LISP macro of only 5 lines, then you may be tempted to learn enough LISP to write those 5 lines. Imagine also the ability to publish (and/or sell) "style generators". An artist could develop a particular interpretation function, it creates images of a given character which others find appealing. The interpretation (which runs inside Gliftic as a routine) could be offered to interior designers (for example) to unify carpets, wallpaper, furniture coverings for single projects. As Adrian Ward [3] says on his WEB site: "Programming is no less an artform than painting is a technical process." Learning a computer language to create a single image is overkill and impractical. Learning a computer language to create your own artistic style which generates an infinite series of images in that style may well be attractive. 2.3 Add an artificial conciousness to Gliftic This is a wild science fiction idea which comes into my head regularly. Gliftic manages to surprise the users with the images it makes, but, currently, is limited by what gets programmed into it or by pure chance. How about adding a real artifical conciousness to the program? Creating an intelligent artificial designer? According to Igor Aleksander [1] conciousness is required for programs (computers) to really become usefully intelligent. Aleksander thinks that "the line has been drawn under the philosophical discussion of conciousness, and the way is open to sound scientific investigation". Without going into the details, and with great over-simplification, there are roughly two sorts of artificial intelligence: 1) Programmed intelligence, where, to all intents and purposes, the programmer is the "intelligence". The program may perform well (but often, in practice, doesn't) and any learning which is done is simply statistical and pre-programmed. There is no way that this type of program could become concious. 2) Neural network intelligence, where the programs are based roughly on a simple model of the brain, and the network learns how to do specific tasks. It is this sort of program which, according to Aleksander, could, in the future, become concious, and thus usefully intelligent. What could the advantages of an artificial artist be? 1) There would be no need for programming. Presumbably the human artist would dialog with the artificial artist, directing its development. 2) The artificial artist could be used as an apprentice, doing the "drudge" work of art, which needs intelligence, but is, anyway, monotonous for the human artist. 3) The human artist imagines "concepts", the artificial artist makes them concrete. 4) An concious artificial artist may come up with ideas of its own. Is this science fiction? Arthur C. Clarke's 1st Law: "If a famous scientist says that something can be done, then he is in all probability correct. If a famous scientist says that something cannot be done, then he is in all probability wrong". Arthur C Clarke's 2nd Law: "Only by trying to go beyond the current limits can you find out what the real limits are." One of Bertrand Russell's 10 commandments: "Do not fear to be eccentric in opinion, for every opinion now accepted was once eccentric" 3. References 1. "From Ramon Llull to Image Idea Generation". Ransen, Owen. Proceedings of the 1998 Milan First International Conference on Generative Art. 2. "How To Build A Mind" Aleksander, Igor. Wiedenfeld and Nicolson, 1999 3. "How I Drew One of My Pictures: or, The Authorship of Generative Art" by Adrian Ward and Geof Cox. Proceedings of the 1999 Milan 2nd International Conference on Generative Art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	c4be
authors	Bock, T., Stricker, D., Fliedner, J. and Huynh, T.
year	1996
title	Automatic generation of the controlling-system for a wall construction robot
source	Automation in Construction 5 (1) (1996) pp. 15-21
summary	In this article we present several important aspects of a software system control. This is designed and developed for a wall assembly robot in an European Esprit III project called ROCCO, RObot assembly system for Computer integrated COnstruction. The system consists of an off-line program for planning of complex assembly tasks and for generating robot actions. The execution is controlled through an adaptive user interface and gives the user the possibilities to switch in an on-line mode command. All the software is designed with the object-oriented concept and implemented in C + +. The wall assembly system is organized on the base of the successive generation of different types of actions, called "Mission", "Task", and "Action". They represent different levels of assembly complexities. Those different actions are organized in a tree structure. Furthermore, the software system can be connected to a CAD-robot simulation software for checking the robot assembly motions. Added to the control system, a recovery module has been implemented for all possible errors during the construction. First the OO-model of the world and of robot activities will be presented. Secondly, several aspects of the algorithm will be explained and at the end we will show the strategy used for the robot motion.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e946
authors	Wood, William H. and Agogino, Alice M
year	1996
title	Case-based conceptual design information server for concurrent engineering
source	Computer-Aided Design, Vol. 28 (5) (1996) pp. 361-369
summary	Conceptual design requires processing information from diverse sources in order to define the functional requirements, operating constraints, and evaluation criteria pertinent to accomplishing a prescribed goal.Historically, the design process focused on the functionality of an artifact for the end customer. Concurrent engineering broadens this focus to account for the concerns of `customers' not previously considered --those along the entire life cycle of an artifact, i.e. marketing, design, manufacture, distribution, operation and disposal. Expanding the design focus to include all of these customers places far greater informationaldemands on the designer. Case-based reasoning applies experience stored in a computerized form to solving similar problems in slightly altered contexts. It has been applied successfully to routine design whereboth the form and the content of design information can be encoded symbolically and manipulated using artificial intelligence techniques. Concurrent conceptual design presents unique problems for such anapproach because design information must be considered at many levels of abstraction and from many viewpoints.We describe an approach that provides the designer with case-based conceptual design information stored in the richly expressive medium of hypermedia (hypertext incorporating multimedia). Design cases ofindustry `best practices' in concurrent engineering are indexed to provide access through multiple interfaces, allowing the user to browse, explore, or pinpoint design case information. The Conceptual DesignInformation Server (CDIS) is implemented using emerging internet standards, such as those associated with the World Wide Web (WWW) and Wide Area Information Service (WAIS), coupled to a robustStructured Query Language (SQL) database and traditional cad packages.
keywords	Conceptual Design, Case-Based Reasoning, Hypermedia Information Systems
series	journal paper
last changed	2003/05/15 21:33

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	1d05
authors	Finch, E.F., Flanagan, R. and Marsh, L.E.
year	1996
title	Electronic document management in construction using auto-ID
source	Automation in Construction 5 (4) (1996) pp. 313-321
summary	The construction process relies upon the effective management of a variety of project information including drawings; specifications; bills of quantities; and other technical data. The method of information transfer determines the ease with which information can be assimilated and used in the construction process. Despite the widespread use of computers for the generation of project information, hard copy documentation remains the primary method of information transfer within the construction industry.Electronic Document Management (EDM) systems offer a level of control over information flow within the construction process, whether documents are in hard copy or in electronic format. However, many of the existing methods of information transfer undermine the performance of EDM systems in two respects; (1) they require the user to re-enter information to register incoming documents into a data base; (2) they cannot interpret and manipulate information contained in or supporting the document. This paper describes a method of bar coding hard copy drawings in order to electronically transfer document information from designer to contractor. This approach is designed to improve the functionality of EDM systems where hard copy documents predominate. The paper also considers the requirements for bar code application standards which would further improve the data exchange process concerning documents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ee14
authors	Fukai, Dennis
year	1996
title	A World of Data: An Animated Construction Information System as a Virtual Hypergraphic Environment
doi	https://doi.org/10.52842/conf.acadia.1996.267
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 267-274
summary	This paper describes research on an animated construction information system organized as a hypergraphic virtual environment. The user enters this environment to interact with the information it contains. A matrix of cubes sits as the gateway to an array of data chambers that give this information its virtual form. A mouse click on one of these cubes leads to a three-dimensional interface that is a simulation of the object to be constructed. Reflective-transparent panels surround the simulation and display two-dimensional projections of its pieces. These panels capture projections of slices through the pieces of the object represented by the simulation. Below the zero plane are slices of floor framing, foundation, excavation, utilities, and soil conditions. Above are ceilings, framing, and roofing. To the sides are finishes, wall framing, fixtures, and elevations. This immersive virtual environment extends as an array of data chambers partitioned by the suspended reflective-transparent panels. Pathways around these partitions lead to secondary chambers that contain sub-simulations of the plumbing, electrical, and HVAC systems. Design-team members access these chambers to coordinate the document's development, review progress, and make changes to the information system. The result is a WORLD of data where graphic information defines both space and time. This breaks with the notion of a construction document as an object-of-exchange and suggests a new focus for the use of computers in the design and construction process.
series	ACADIA
last changed	2022/06/07 07:50

_id	e8ef
authors	Soufi, B. and Edmonds, E.
year	1996
title	The cognitive basis of emergence: implications for design support
source	Design Studies, Vol. 17 No. 4, 451-463
summary	Emergent shapes play a significant role in the creative design process. Designers frequently visualize emergent shapes and structure their understanding of the design and their reasoning about it in terms of emergent entities and relations. In design research, effort has concentrated on developing computational models capable of representing emergent shapes. Much less attention has been paid to the cognitive processes that give rise to emergence. In cognitive science, however, emergence has been the subject of empirical study. It is suggested that both the study of perception and that of mental imagery can contribute to understanding the cognitive psychological basis of emergence and the nature of emergent shapes that arise. Relevant cognitive science research findings are reviewed in this paper. Based on these findings two main classes of emergence processes are developed. Their implications for the development of user-interactive computational models of emergent shapes are then discussed.
series	journal paper
last changed	2003/04/23 15:50

_id	ddssar9636
id	ddssar9636
authors	Will, B.F., Wong, W.C.H. and Chu, C.H.
year	1996
title	A Case Study of Hypermedia Applications in the Building Industry: Curtain Wall Design, Fabrication and Erection
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper is based on the development of a Hypermedia Information Delivery System called ArchiSpace, by the Department of Architecture, The University of Hong Kong to produce a comprehensive knowledge of a Curtain Wall system. A set of construction drawings of the building were analysed and converted to the 3D hypermedia system format. The focus of this study is the use of the hyper-model environment in information organization and once the 3D hypermedia system is formed the information on the curtain wall system is accessed by the use of hyper-text environments hyper-image environments, and hyper-model environments. The paper analysed that the hyper-model access method seems to be more appropriate than the hyper-text and hyper-image access methods for users who do not have any knowledge pre-requisites. The results obtained by this research are being applied to improve the user friendliness for information access within a hyper-model environment.
series	DDSS
last changed	2003/08/07 16:36

_id	a8b4
authors	Bridges, A.H.
year	1997
title	Implications of the Internet for the construction industry
source	Automation in Construction 6 (1) (1997) pp. 45-49
summary	This paper is an adaptation of a section of the Building IT 2005 multimedia CD-ROM (Building IT 2005, Construction IT Forum, Cambridge, 1995). The paper discusses the implications of network technology for the construction industry. Introductory material about the Internet (and links to interesting resources) is included in the publication cited and a much more extensive guide is available in A.H. Bridges, The Construction Net, E. & FN Spon, London 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	38d1
id	38d1
authors	Cornick, Tim
year	1996
title	COMPUTER-INTEGRATED BUILDING DESIGN
source	Routledge [ISBN: 0419195904]
summary	An accessible guide to the principles and practical applications of computer integrated systems in the field of construction management, this book provides an understanding of the potential of computer systems as information integration increases in the construction industry. Case studies offer examples of successful practice in this field.
series	book
type	normal paper
last changed	2005/03/06 07:32

_id	8b51
authors	Refvem, Sharon
year	1996
title	Constructive Learning Techniques and Color Application in Design
doi	https://doi.org/10.52842/conf.ecaade.1996.371
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 371-380
summary	This paper presents some of the results of my work in the area of architectural education and color application. "Constructive Learning" techniques are the framework within which a course in color theory and application has been developed for architectural students and professionals. Constructive learning theory designates three main learning phases: introductory, advanced and experienced; each of which has a unique set of requirements that must be addressed by those seeking to teach or develop meaningful tools for a given task. The introductory level is represented by those who posses little if any prior skills or knowledge in the subject area. Here it is advantageous to carefully guide the knowledge acquisition process in order to help build a knowledge foundation upon which a personalized learning process can take place. Advanced students are those that are ready, through a more focused, context related approach, to expand their capabilities. Finally, experienced learners can be defined as those capable of critically applying and innovatively using the knowledge, skills and tools that they have obtained through the introductory and advanced phases of the learning process. Because computers introduce the issue of color at a much earlier stage of design than might previously have been the case, a new set of skills and tools are needed. The proposed course seeks to define an appropriate learning methodology for designers that can provide them with not only knowledge of the subject area being covered, but also skills with which to approach it.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	c872
authors	Beliveau, Y.J., Fithian, J.E. and Deisenroth, M.P.
year	1996
title	Autonomous vehicle navigation with real-time 3D laser based positioning for construction
source	Automation in Construction 5 (4) (1996) pp. 261-272
summary	Autonomous Guided Vehicles (AGVs) are a way of life in manufacturing where navigation can be done in a structured environment. Construction is an unstructured environment and requires a different type of navigation system to deal with three dimensional control and rough terrain. This paper provides a review of navigation systems that utilize dead-reckoning in conjunction with absolute referencing systems such as beacon-based systems, and vision and mapping based system. The use of a real-time laser based technology is demonstrated as a new form of navigation. This, technology does not rely on dead reckoning. The paper outlines the issues and strategies in guiding an autonomous vehicle utilizing only the laser-based positioning system. Algorithms were developed to provide real-time control of the AGV. The laser based positioning system is unique in that it provides three dimensional position data with five updates per second. No other system can provide this level of performance. This allows for control of end effectors and autonomous vehicles in complex and unstructured three dimensional environments. The use of this new type of navigation makes possible the automation of large complex assemblies in rough terrain such as construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e309
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case for Computer-Assisted Creativity through Clarity, Project 12 CAD and Beyond
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 31-35
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for' Clarity for the benefit of creative Computing is put forward.
series	plCAD
email
last changed	2003/05/17 10:01

_id	a0d3
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case For Computer Assisted Creativity Through Clarity - Project 12 CAD and Beyond ...
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 45-60
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for Clarity for the benefit of creative Computing is put forward.
series	other
last changed	1999/04/08 17:16

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	0b25
authors	Gross , Mark D.
year	1996
title	Elements That Follow Your Rules: Constraint Based CAD Layout
doi	https://doi.org/10.52842/conf.acadia.1996.115
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 115-122
summary	The paper reports on CKB (Construction Kit Builder) a prototype CAD program that designers can program with positioning and assembly rules for layout of building elements. The program's premise is that designing can be understood as a process of making and following rules for the selection, position, and dimension of built and space elements. CKB operates at two distinct levels of design: the technical system designer, who makes the rules, and the end designer, who lays out the material and space elements to make a design. CKB supports two kinds of rules with constraint based programming techniques: grid and zone based position rules, and assembly rules that position elements with respect to one another. The paper discusses the rationale for CKB and describes its implementation.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	dba1
authors	Hirschberg, Urs and Wenz, Florian
year	2000
title	Phase(x) - memetic engineering for architecture
source	Automation in Construction 9 (4) (2000) pp. 387-392
summary	Phase(x) was a successful teaching experiment we made in our entry level CAAD course in the Wintersemester 1996/1997. The course was entirely organized by means of a central database that managed all the students' works through different learning phases. This set-up allowed that the results of one phase and one author be taken as the starting point for the work in the next phase by a different author. As students could choose which model they wanted to work with, the whole of Phase(x) could be viewed as an organism where, as in a genetic system, only the "fittest" works survived. While some discussion of the technical set-up is necessary as a background, the main topics addressed in this paper will be the structuring in phases of the course, the experiences we had with collective authorship, and the observations we made about the memes2 that developed and spread in the students' works. Finally we'll draw some conclusions in how far Phase(x) is relevant also in a larger context, which is not limited to teaching CAAD. Since this paper was first published in 1997, we have continued to explore the issues described here in various projects3 together with a growing number of other interested institutions worldwide. While leaving the paper essentially in its original form, we added a section at the end, in which we outline some of these recent developments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c4ae
id	c4ae
authors	Knapp, Robert W. and McCall, Raymond
year	1996
title	PHIDIAS II - In Support of Collaborative Design
doi	https://doi.org/10.52842/conf.acadia.1996.147
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 147-154
summary	The World Wide Web in combination with Java and Virtual Reality Modeling Language (VRML) create great opportunities for collaboration by distributed design teams. To take advantage of these opportunities, we have begun to create a version of the PHIDIAS hyperCAD system (McCall, Bennett and Johnson 1994) that will support communication and collaboration among designers over the Word Wide Web. PHIDIAS is an intelligent, hypermedia-based system for computer-aided design. Our strategy is to divide PHIDIAS into two parts: 1) a client-side user interface and 2) a server-side hyperCAD database engine. The client-side interface is being implemented using Java and VRML. Implementing the PHIDIAS front-end with Java enables program code distribution via the World Wide Web. VRML provides PHIDIAS with client-side computation and display of 3D graphics.
series	ACADIA
last changed	2022/06/07 07:51

For more results click below: